In the compound cah2 calcium has an oxidation number of 2+ and hydrogen has an oxidation number of

Answers

Answer 1

The oxidation number of H is -1.

Sum of the oxidation numbers in each element = charge of the complex

CaH₂ has 1 Ca atom and 2H atoms. The charge of the complex is zero. Let’s say Oxidation number of H is "a".

Then,

    (+2) + 2 x a = 0

        +2  + 2a  = 0

                  2a = -2

                    a = -1

Hence, the oxidation number of Hydrogen atom in CaH₂ is -1


Answer 2
Final answer:

In the compound CaH2, calcium has an oxidation number of +2, and hydrogen has an oxidation number of -1, balancing the charges. The oxidation states of elements in a compound like CaH2 influence their properties and reactivity.

Explanation:

In the compound CaH2, calcium has an oxidation number of +2 and hydrogen has an oxidation number of -1.

Hydrogen usually has an oxidation number of +1 except when bonded to metals in hydrides where it is -1. This is the case in compounds like CaH2.

Each hydrogen atom in CaH2 carries a charge of -1, balancing with the +2 charge of calcium to maintain overall charge neutrality.


Related Questions

What is the main similarity among elements in group 2?

Answers

Answer:
             Chemical Properties

Explanation:
                   Elements belonging to same group in a periodic table have same chemical properties. This similarity in chemical properties arises mainly from the same number of valence shell electrons. Group 2 elements also called Alkaline Earth Metals have two valence electrons in their valence shell with following electronic configuration....

                                                       ns²

Where "n" represents principle quantum number or number of main shell.

The reactivity of these elements is due to the metallic behavior as these elements looses two electrons to form a cation with +2 oxidation number. i.e.

                                          X   →   X⁺²  +  2 e⁻

Therefore, all elements present on Group II will form a cation with +2 oxidation number and behave in the same manner with different reagents.

Which term refers to an electrochemical cell that produces an electric current?
porous barrier
galvanic cell
electrolytic cell
inert electrode

Answers

Correct answer: Galvanic cell

Reason:
Following are the differences between Galvanic cell and electrolytic cell:
1. Galvanic cell converts chemical energy into electrical energy , on other hand electrolytic cell converts electrical energy into chemical energy.
2. In galvanic cell, redox reaction is spontaneous and is responsible for the production of electrical energy. in electrolytic cell, the redox reaction is not spontaneous and electrical energy has to be supplied to initiate the reaction.

Thus, galvanic cell refers to an electrochemical cell that produces an electric current

Which of these has the highest h+ concentration? lemon juice, ph = 2.3 red wine, ph = 3.2 tomato juice, ph = 4.7 household ammonia, ph = 10.8?

Answers

Answer:

Lemon juice has the highest [tex]H^+[/tex] concentration.

Explanation:

The pH of the solution id the negative logarithm of hydrogen ion concentration in an aqueous solution.

[tex]pH=-\log[H^+][/tex]

1) Lemon juice with pH = 2.3

[tex]2.3=-\log[H^+][/tex]

[tex][H^+]=0.005011 M[/tex]

2)Wine with pH = 3.2

[tex]3.2=-\log[H^+][/tex]

[tex][H^+]=0.006309 M[/tex]

3)Tomato juice with pH = 4.7

[tex]4.7=-\log[H^+][/tex]

[tex][H^+]=1.99\times 10^{-5} M[/tex]

4)House hold ammonia  with pH = 10.8

[tex]10.8=-\log[H^+][/tex]

[tex][H^+]=1.584\times^{-11} M[/tex]

Lemon juice with a pH of 2.3 has the lowest pH value.

What is the pH scale?

The pH scale measures the acidity or alkalinity of a solution, with lower pH values indicating higher acidity and higher pH values indicating higher alkalinity.

For this question, we want to find the solution with the highest H+ (hydrogen ion) concentration, which corresponds to the lowest pH value.

Considering all the options given; Lemon juice with a pH of 2.3 has the lowest pH value, indicating the highest H+ concentration.

Therefore, lemon juice has the highest H+ concentration among the given options.

Learn more about pH scale here: https://brainly.com/question/26424076

#SPJ4

When combined two gases have a pressure of 4.0 atm.if one has a pressure of 1.5 atm , what is the pressure of the second gas?

Answers

When combined two gases have a pressure of 4.0 atm. If one has a pressure of 1.5 atm, the pressure of the second gas will be; 4.0 atm- 1.5 atm = 2.5 atm.
Total pressure = Partial pressure of one gas + partial pressure of the second gas.Therefore; the pressure of the second gas will be; 2.5 atm

Determine the oxidation state of the metals in pbcro4. 1. pb = +1, cr = +4 2. pb = +2, cr = +4 3. pb = +2, cr = +6 4. pb = +1, cr = +1 5. pb = +1, cr = +6

Answers

PbCrO₄ is made of a cation and anion
anion is CrO₄²⁻
we need to then find the oxidation number of Pb which is the same as its charge
when we make compounds, the charges of the cations and anions are exchanged.
Charge of Pb is then Pb²⁺
since charge of monoatomic ion is equal to oxidation number of the ion
oxidation number of Pb = +2
net charge of CrO₄²⁻ is -2
oxidation number of Cr + (4 x oxidation number of O) = -2
oxidation number of O is usually -2
oxidation number of Cr = y
y + (4 x -2 ) = -2
y - 8 = -2
y = +6
oxidation number of Cr is +6

answer is 
3. pb = +2, cr = +6

The oxidation state of the lead and chromium metal in the PbCrO₄ compound is +2 and +6 respectively.

What is oxidation state?

Oxidation state of any atom tells about the number of exchangeable electrons from the outermost shell of that atom.

As we know that in the compound PbCrO₄, CrO₄ is an anion and charge on this is -2 i.e. it is represented as CrO₄²⁻. We know that oxidation state of each oxygen atom is -2 and let us assume the oxidation state of chromium is y, so we calculate the value of y for CrO₄²⁻ as:

y + 4(-2) = -2

y = -2 + 8 = 6

Let the oxidation state of lead is x and calculation for that from PbCrO₄ will be done as:

x + 6 + 4(-2) = 0

x = 8 - 6 = 2

Oxidation state of Pb is +2 and of Cr is +6.

To know more about oxidation state, visit the below link:

https://brainly.com/question/8990767

What characteristics are shared by all alkali metals and alkaline earth metals? no answer provided
a. they do not react with water at all.
b. they are strong and shiny.
c. they form alkaline solutions when mixed with water.
d. they conduct electricity very well?

Answers

Final answer:

Alkali metals and alkaline earth metals share several characteristics: they react with water to form alkaline solutions, they are shiny and have a metallic appearance, and they conduct electricity well.

Explanation:

Alkali metals and alkaline earth metals share several characteristics:

They react with water to form alkaline solutions. Alkali metals like sodium and potassium are highly reactive and can vigorously react with water, releasing hydrogen gas and forming alkaline solutions.They are shiny and have a metallic appearance. Alkali metals and alkaline earth metals are good conductors of heat and electricity, which gives them a shiny and metallic appearance.They conduct electricity well. Both alkali metals and alkaline earth metals are good conductors of electricity due to the presence of loosely held outer electrons.

Learn more about characteristics of alkali metals and alkaline earth metals here:

https://brainly.com/question/12708549

#SPJ12

Which of the following shows the correct rearrangement of the the heat equation q = mCpΔT to solve for specific heat?
answer is C
Cp-=q/m^T

Answers

when 
q = m*Cp*ΔT

when q is Heat energy in Joules

and m is the mass of the substance in Kg

and Cp is the specific heat (J/Kg.K)

and Δ T is the change in temperature in Kelvin


so, by rearranging the formula we can get the specific heat Cp from:

∴Cp = q / m*ΔT

Answer:

[tex]C_{p} = \frac{q}{m(deltaT)}[/tex]

What type of air mass most likely located over atlanta and Georgia

Answers

Answer is: continental tropical type of air mass most likely located over Atlanta and Georgia.
Atlanta and Georgia have a humid subtropical climate (hot and humid summers, mild winters) with four distinct seasons and good precipitation year round.
Gulf of Mexico can bring warm air and there is cold air from Artic.

How many atoms of zinc are in 0.60 mol of zinc? 2. how many moles is 3.52 × 1024 molecules of water? 3. how many atoms are in 2.00 moles of li? 4. how many moles are in 6.02 x 1023 atoms of carbon? 5. how many moles are in 4.9 x 1023 molecules of zncl2?

Answers

  question 1
 by use  of Avogadro  law
that is,1 mole = 6.02  x10^23 atoms
  what  about  0.60  moles  
by use of cross multipication

=(0.60 mole/ x 6.02 x10^23)/ 1mole = 3.612 x10^23 atoms of Zn

question  2
by  use  of Avogadro  law  constant
that  is 1 mole  =6.02  x10^23  molecules
what  about 3.52 x10^24  molecules
by cross  multiplication
=( 1 mole x3.52 x10^24 molecules/6.02 x10^23  molecules)  = 5.847  moles of water

question 3

by  use  of Avogadro  law  constant
1 mole = 6.02 x10^23 atoms
what about  2 moles =? atoms
by use of cross  multiplication
=( 2moles  x 6.02 x10^23 )/1mole= 1.204 x10^24  atoms  of Li

question 4

by  use  of Avogadro  law  constant
1 mole = 6.02 x10^23  atoms
what about 6.02  x10^23 atoms =? moles
cross  multiplication
(1 mole x6.02 x10^23 atoms)/(6.02 x10^23 atoms)=  1 mole  of carbon

question  5
by  use Avogadro law  constant
1 mole =6.02 x10^23 molecules
what  about 4.9 x10^23  moles =?  moles
by   cross  multipication
=( 1mole x 4.9  x10^23 molecules) /6.02 x10^23  molecules = 0.81  moles  ZNCl2

Final answer:

To calculate the number of atoms, molecules, or moles, we use Avogadro's number (6.02 × 10²³). There are 6.02 × 10²³ atoms in 0.60 mol of zinc. Dividing the number of molecules by Avogadro's number gives us the moles for each compound in the problems posed.

Explanation:

To solve these types of problems, we use Avogadro's number (6.02 × 10²³), which is the number of units in one mole of any substance. This can be atoms, ions, or molecules, depending on the context of the substance in question.

Answers:

There are 6.02 × 10²³ atoms of zinc in 0.60 mol of zinc.To find how many moles 3.52 × 10²⁴ molecules of water represents, divide by Avogadro's number: 3.52 × 10²⁴ molecules ÷ (6.02 × 10²³ molecules/mol) ≈ 5.84 mol of water.For lithium, there are 2 × 6.02 × 10²³ atoms in 2.00 moles of Li, since 1 mol of any element contains exactly 6.02 × 10²³ atoms by definition.Having 6.02 × 10²³ atoms of carbon means you have 1 mole of carbon, as 1 mol is equivalent to Avogadro's number of atoms.To determine the number of moles in 4.9 × 10²³ molecules of ZnCl₂, divide by Avogadro's number: 4.9 × 10²³ molecules ÷ 6.02 × 10²³ molecules/mol ≈ 0.814 mol of ZnCl₂.

which of the following is the correct structural formula for ethene

Answers

Ethene belongs to class of unsaturated hydrocarbons called as Alkenes. Alkene contains a double bond between two carbon atoms. And the general formula for alkene is,

                                               CnH2n

Whereas in Ethene, n = 2, so
   
                                               C₂H₄

Therefore, in ethene there are two carbon atoms doubly bonded to each other via one sigma and one pi bond. Also each carbon atom is further covalently bonded to two hydrogen atoms via sigma bond as shown below,

Determine the mass of 8.59 ×1023 atoms cl. answer in units of g.

Answers

1 mole  of particles  = 6.02*10²³ 
8.59 *10²³atoms*(1 mol/6.02*10²³  atoms) = (8.59/6.02) mol
M(Cl)=35.5 g/mol
(8.59/6.02) mol*35.5 g/mol=50.7 g

This is the uneven distribution of bonding electrons in a molecule creating partially positive and negative sides of that molecule. example: water and ammonia have this, but methane does not

Answers

Following are the molecules of interest H2O, NH3 and CH4.

In each of the above system, central element undergoes sp3 hybridization.

For example, in H2O, oxygen undergoes sp3 hydridization
in case of NH3, nitrogen underdoes sp3 hybridization,
and in case of CH4, methane undergoes sp3 hydridization.

Followed by hybridization, the hybridized orbitals are unsymmetrically occupied in case of H2O and NH3. In water, two hybridized  orbitals are occupied by H atom and remaining two orbitals contain lone pair of electrons. In case of NH3, three hybridized orbitals are utilized for bonding with H atom, while one hybridized orbital contain lone pair of electron. In contrast to this, in case of methane all the four hybridized orbitals are utilized for bonding with hydrogen. Thus, methane is symmetrically substituted in contrast to water and ammonia. Due to this,  there is the uneven distribution of bonding electrons in H2O and NH3, thereby creating a partially positive and negative sides of that molecule. 

Which of the following are monomers of the genetic material DNA?

monosaccharides


fatty acids


nucleotides


amino acids

Answers

Answer:
            Nucleotides are the monomers of DNA.

Explanation:
                   Nucleic Acids polymers (DNA and RNA) are made up of repeating called Nucleotides.
                   Nucleotides consist of following parts;

         1) Nucleoside: Which is made up of 5-carbon sugar and a nitrogenous               base. Colored in RED.

         2) A Phosphate group. Colored in BLUE.

Answer:

Nucleotides

Explanation:

The monomer units of DNA are nucleotides.

Which substance would be least likely to dissolve in a polar solvent?

Answers

Final answer:

Octane (C8H18) and naphthalene are nonpolar substances and would be least likely to dissolve in a polar solvent like water. Methanol (CH3OH), sodium sulfate (Na2SO4), LiCl, and benzoic acid (CH2CO2H) are polar or ionic and would more readily dissolve.

Explanation:

To predict which substance would be least likely to dissolve in a polar solvent like water, one must consider the polarity of the molecules involved. In general, "like dissolves like," which means that polar solvents will dissolve polar substances and nonpolar solvents will dissolve nonpolar substances.

Methanol (CH3OH) and sodium sulfate (Na2SO4) are polar and will likely dissolve in water due to their ability to create intermolecular hydrogen bonds and ionic interactions, respectively. On the other hand, octane (C8H18) is nonpolar, consisting mostly of C-H bonds, and would have the least tendency to dissolve in a polar solvent due to dispersion forces being the primary intermolecular interaction.

Considering LiCl, benzoic acid (CH2CO2H), and naphthalene, LiCl and benzoic acid are more likely to dissolve in water due to their ionic and polar nature, respectively, while naphthalene, being nonpolar, would be the least likely to dissolve.

Which element would you expect to behave the most like carbon (c)? apex?

Answers

The answer is Silicon,  it also forms 4 bonds. Usually elements in the same group or vertical column in the periodic table all have similar chemical bonding properties. It is just below carbon, so it has more similarities of properties with carbon. 

Answer:Germanium (Ge)

Explanation:

Describe how to find the atomic number for the element oxygen

Answers

Go to you periodic of elements and find oxygen.
Oxygen has eight protons. so its atomic number is eight.

HELPPP WILL GIVE BRAINLIEST

The scientist Robert Boyle observed that a gas can expand to fill its container. Explain how Boyle's observation is explained by the Kinetic Theory of Matter.

Answers

Kinetic Theory of matter explains the physical behavior of matter, in our case the behavior of gases. All important postulates regarding different properties of gases are as follow;

1)  Sizes of Gas particles are very small, small enough to be considered as neglegible.

2)  Kinetic energy of gas paricles is greater than that of Solids and liquids.

3)  Distance between gas molecules is very large. That is why Boyle observed that a gas can expand to fill entire container.

4)  Collisions take place between gas molecules and with the walls of container causing them to create pressure.

5)  Forces of attraction between gas molecules is negligible, therefore they don't interact and never come close to each other.

6) Gravity has almost zero effect on the molecules of gas.

The mass of a mole of carbon atoms is 12.011 grams. What is the mass of a single atom of carbon?

Answers

Amount of substance can be measured in the number of moles.
Avagadros constant states that 1 mol of any substance is made of 6.022 x 10^23 units.
These units could be atoms making up elements or molecules making up compounds
1 mol of C is made of 6.022 x 10^23 atoms of C
Since 1 mol of C has a mass of 12.011 g
Therefore 6.022 x 10^23 atoms of C weigh 12.011 g
Then 1 atom of C weighs -12.011 g / 6.022 x 10^23 atoms = 1.99 x 10^(-23) g
Mass of 1 C atom is 1.99 x 10^(-23) g

Answer:

1.99 x 10^(-23) g

Explanation:

Convert to standard notation 7.77x10^-4

Answers

0.000777

The exponent value tells you how many times you need to move the period in the number, and the sign tells the direction (positive, left; negative, right; when converting from standard to exponential, and the opposite when converting from exponential to standard).

Phytic acid and oxalic acid ________ the absorption of dietary iron.

Answers

Phytic acid and oxalic acid decrease the absorption of dietary iron. Both Phytic acid and Oxalic acid binds minerals so that they cannot be absorbed, Phytic acid is found in cereal grain fibers while Oxalic acid is found in some leafy green vegetables, such a spinach. 

Why should you pay attention to the physical states of reactants and products when writing elquilibrium constant expressions?

Answers

Answer is: because pure liquids (shown in chemical reactions by appending (l) to the chemical formula) and solids (shown in chemical equations by appending (s) to the chemical formula) not go in to he equilibrium constant expression, only gas state (shown in chemical reactions by appending (g) to the chemical formula) reactants and products go in to he equilibrium constant expression.
For example, equilibrium constant expression Kp for reaction:
A(s) + 2B(s) ⇄ 4C(g) + D(g).
will be: Kp = [C]⁴·[D].
But for reaction A(g) + 2B(g) ⇄ 4C(g) + D(g), will be:
Kp = [C]⁴·[D] / [A]·[B]².

The midpoint of GH is M(5,3). One endpoint is G(1,-5). Find the coordinates of the other endpoint H.

Answers

The answer is (9,11) 

Midpoint formula: (x1 + x2)/2, (y1 + y2)/2, where (x1, y1) and (x2, y2) are the endpoints of the segment 

x-coordinate of midpoint = (x1 + x2)/2 
5 = (1 + x2)/2 
10 = 1 + x2 
9 = x2 

y-coordinate of midpoint = (y1 + y2)/2 
3 = (-5 + y2)/2 
6 = -5 + y2 
11 = y2 

Final answer:

The coordinates of the other endpoint, H, can be calculated using the midpoint formula: Endpoint = (2 x Midpoint) - Known Endpoint. Applying this formula, we find that the coordinates of endpoint H are (9, 11).

Explanation:

The subject of this question is Mathematics, specifically coordinate geometry. Given the midpoint M(5,3) and one endpoint G(1,-5), we're asked to find the coordinates of the other endpoint, H. The formula to find the coordinates of an endpoint when given the midpoint and another endpoint is as follows:

Endpoint = (2 x Midpoint) - Known Endpoint

So, applying this formula, we find H to be:

H = (2x5 - 1, 2x3 - (-5)) = (9, 11).

So the other endpoint H is at (9, 11).

Learn more about Midpoint formula here:

https://brainly.com/question/30242630

#SPJ2

Hg(OH)2+H3PO4=Hg3(PO4)2+H2O

Answers

The balanced reaction equation can be written as;

[tex]3Hg(OH)_2 + 2H_3PO_4 --- > Hg_3(PO_4)_2 + 6H_2O[/tex]

How to balance chemical reaction

Balancing a chemical reaction involves ensuring that the number of atoms of each element is the same on both sides of the equation. Start by writing the unbalanced equation and counting the number of atoms for each element. Begin balancing with the most complex molecules and then move on to balancing other elements.

From the question, we would have to look at the reactants and the products and know the coefficients to add so that we obtain the balanced reaction so we have that the reaction equation is;

[tex]3Hg(OH)_2 + 2H_3PO_4 --- > Hg_3(PO_4)_2 + 6H_2O[/tex]

Learn more about chemical reaction:https://brainly.com/question/34137415

#SPJ6

Which piece of lab equipment is BEST used for storing sulfuric acid for a long period of time? A) soup can B) graduated cylinder C) metal tin with a cover D) glass bottle with a rubber top or stopper

Answers

D, a glass bottle with a rubber stopper. 

The correct option is D.  Glass bottle with a rubber top or stopper Equipment is Best used for storing sulfuric acid for a long period of time.

What is sulfuric acid?

Concentrated sulfuric acid is a hygroscopic material that, when in contact with air, absorbs moisture. As a result, it is kept in airtight bottles.

Acid sulfuric (also known as sulphuric acid, battery acid, vitriol, mineral acid and hydrogen sulfate).

The production of fertilizers, pigments, dyes, medicines, explosives, detergents, inorganic salts and acids, as well as petroleum refining and metallurgical operations like plating, anodizing, and steel fabrication all utilize different amounts of acid.

Therefore, The correct option is D.  Glass bottle with a rubber top or stopper Equipment is Best used for storing sulfuric acid for a long period of time.

To learn more about sulfuric acid, refer to the link:

https://brainly.com/question/1107054

#SPJ2

If an element has three isotopes with known natural abundance percentages, what other information is needed to find the average atomic mass of the element?

Answers

the average atomic mass of the element is the weighted average atomic mass of element with respect to the natural abundance of all the isotopes.
isotopes are atoms of the same elements with different mass numbers , in other words same number of protons but different numbers of neutrons. 
to find the average atomic mass we need to know the atomic masses of all the isotopes in addition to the natural abundance percentages of the isotopes.

answer is we need to know the atomic masses of the isotopes as well 

The mass of each isotope.

Given the equation zn(s) + 2 hcl(aq) → zncl2(aq) + h2(g), what mass of hydrogen gas is produced when 2.8 g zn is reacted with excess aqueous hydrocholric acid?

Answers

Final answer:

To calculate the mass of hydrogen gas produced, we use stoichiometry of the chemical reaction between Zn and excess HCl. After determining moles of Zn from the given mass, we find the moles of H2, which is equal due to the 1:1 molar ratio, and then multiply by the molar mass of H2 to get 0.0863 g of hydrogen gas.

Explanation:

Calculating the Mass of Hydrogen Gas

To calculate the mass of hydrogen gas produced when 2.8 g of Zn is reacted with excess hydrochloric acid (HCl), we will use the stoichiometry of the balanced chemical reaction: Zn(s) + 2 HCl(aq) → ZnCl₂ (aq) + H₂(g). The reaction shows that one mole of Zn produces one mole of H2. First, we find the molar mass of Zn, which is approximately 65.38 g/mol.

Step 1: Calculate the moles of Zn.

Moles of Zn = (mass of Zn) / (molar mass of Zn) = 2.8 g / 65.38 g/mol = 0.0428 mol

Step 2: Determine the moles of H2 formed using the molar ratio from the balanced equation (1:1).

Moles of H2 = Moles of Zn = 0.0428 mol

Step 3: Calculate the mass of H2 using the molar mass of H2 (approximately 2.016 g/mol).

Mass of H2 = Moles of H2 × Molar mass of H2 = 0.0428 mol × 2.016 g/mol = 0.0863 g

Therefore, the mass of hydrogen gas produced is 0.0863 g.

The poh of a solution is 9.32. calculate the hydrogen ion concentration of the solution.

Answers

Final answer:

To find the hydrogen ion concentration from the pOH value of 9.32, we first calculate the pH as 4.68. We then use the relationship [H3O+] = 10^-pH to find the hydronium ion concentration, which is approximately [tex]2.09 × 10^-5 M.[/tex]

Explanation:

The student asked about calculating the hydrogen ion concentration of a solution from its pOH. The pOH of a solution is 9.32, and we want to find the [H3O+]ion concentration, also written as [H+].

The relationship between pH, pOH, and ion concentrations in water at 25 °C is given by the equation:

pH + pOH = 14

From the given pOH value, we can find the pH:

pH = 14 - pOH

pH = 14 - 9.32 = 4.68

Once we have the pH, we can calculate the hydronium ion concentration using the inverse of the logarithmic relationship:

[H3O+] = 10-pH

[H3O+] = 10-4.68

The final hydrogen ion concentration, or hydronium ion concentration, is therefore approximately 2.09 × 10-5 M.

Which will dissolve faster in water one gram cube of sugar or one gram of powder sugar?

Answers

the  powder sugar because has more contact area 

Powdered sugar dissolves faster than a cube of sugar because it has a greater surface area, which increases the frequency of collisions between the sugar particles and water molecules, hence speeding up the dissolving process.

In the comparison of a one gram cube of sugar and one gram of powdered sugar dissolving in water, the powdered sugar will dissolve faster. This phenomenon is because dissolving is a surface-driven process where solvent molecules collide with the surface of the solute.

The powdered sugar has a greater surface area exposed to the water, increasing the opportunity for these collisions to occur, which enhances the rate of dissolution. Moreover, stirring the solution can increase the rate at which both the powdered and the cube sugar dissolve. However, since the cube has less surface area exposed compared to powdered sugar, the powdered form will still dissolve more quickly, even with agitation.

The speed at which the sugar dissolves isn't dependent on the type of sugar since both forms have the same chemical composition, but rather on the physical form of the sugar which affects the overall surface area available for dissolution.

define :
elements found in group 17, highly reactive, and gain 1 electron to become stable

Answers

The answer to your question: 'The Halogens'
That would be the halogen group, otherwise known as noble gases.

Kinetic energy is the energy of motion.

a) True

b) False

Answers

the answer is a) true 
The answer is A.) True.
Kinetic energy is the action of which an object releases the energy stored from potential energy. This causes the object to move, which puts the object in motion.
Other Questions
The radius of the base of a cone is 4 inches. the slant height of the cone is 6 inches. which is closest to the surface area of the cone? Nguyen is writing a report on the personality disorder that has been studied most thoroughly. he'll most likely end up writing his paper on the topic of _____ personality disorder. The scientific method is actually a multi-pathway evaluating tool. Please give an example of how you might use a condensed version of the scientific method to solve a problem you encounter in your life. Be sure to label which parts of the process the steps belong to in the scientific method Which is a negative result of eating too many lipids?A-Fatty acids become deficient in the body.B-Dangerous fat-soluble vitamins are carried to cells.C-Fat deposits put a strain on the body.D-The body produces too many membrane structures. Eleanor, who is 75, believes that older people cannot remember new information very well. Because of this, she has decided not to learn how to use a computer. In view of the research regarding memory and the elderly, what can you say to Eleanor? The result of rounding the whole number 724,804 to the nearest thousands place is: Which expression is equivalent to 10x^6y^12/-5x^-2y^-6? Assume .x=0.y=0. The national institutes of health is a federal agency that is responsible for:a. improving access to healthcare services for people who are medically vulnerable.b. improving access to quality substance abuse and mental health services.c. improving the quality, safety, efficiency of health care.d. research towards preventing and curing disease. At a recent family reunion, philip's uncle recognized him as his brother's son, but could not recall his name. philip's uncle exhibited a(n) __________ memory deficit. Which two measures did the United States take to counter terrorism after the September 11 attacks?A)withdrew support for IsraelB)passed the Patriot ActC)banned immigrationD)increased airport securityE) denied entrance to foreigners The U-Drive Rent-A-Truck company plans to spend $15 million on 310 new vehicles. Each commercial van will cost $35 comma 000 , each small truck $70 comma 000 , and each large truck$60 comma 000 . Past experience shows that they need twice as many vans as small trucks. How many of each type of vehicle can they buy? How is augmented reality used A) to integrate 3-D graphics for providing a live, direct, or indirect view of a physical real-world environmentB) to gather and analyze digital data using special software toolsC) to provide up-to-the-minute information for decision-making processesD) to monitor employee movement during working hours Compare and Contrast topics and themes of writers from Americas and Europeans Predict where the Katydid would hide from danger? Draw a picture of what you predict, help please The Silk Road was discovered by __________. A. Marco Polo B. Genghis Khan C. General Zhang Qian D. Kublai Khan Calcium carbonate reacts with hydrobromic acid to form calcium bromide, carbon dioxide, and water according to the reaction below. what is the molarity of the hydrobromic acid if 250.0 ml of it reacts with 5.64 grams of calcium carbonate? Explain why the equation (x-4)^2-10=15 has two solutions. Then solve the equation to find the solutions. Please show all your work! (30 points) A standard number cube with the numbers 1 through 6 is rolled. Find the probability of rolling a number greater than 5 .1. 1 / 62. 1 / 33. 1 / 44. 2 / 3 If a = 0.3 with a line over 3 and b = 0.5 with a line over 5, what is the value of a + b?8/108/988/10080/99 75 points Write and solve an equation to find the measure of NEP. Make sure you show all work.