Jason makes a graphic organizer for insulators and conductors and wants to add the following labels to it.
Label 1: Lacks free electrons
Label 2: Aluminum

In which regions should Jason place each label?

A) Label 1: X
Label 2: Y
B) Label 1: Z
Label 2: X
C) Label 1: X
Label 2: Z
D) Label 1: Z
Label 2: Z

Jason Makes A Graphic Organizer For Insulators And Conductors And Wants To Add The Following Labels To

Answers

Answer 1

Jason should place the regions in:

C) Label 1: X

Label 2: Z

Answer 2

Answer: C) Label 1: X

Label 2: Z

Explanation: Conductors are those substances which conduct electrical current easily because of the presence of free electrons whereas Insulators do not conduct electrical current as they do not contain free electrons. Some common  examples of conductors are copper, aluminum, gold, and silver. Some common examples of insulators are glass, air, plastic, rubber, and wood.

Label 1: Lacks free electrons  must be placed in the area marked X as they correspond to insulators.

Label 2: Aluminum is an example of conductor and thus must be labelled in area marked by Z.

Area Y corresponds to semiconductors which have properties intermediate to conductors and insulators.



Related Questions

Rock a is dropped from a cliff and rock b is thrown upward from the same position on the cliff.
a. when each rock reaches the ground at the bottom of the cliff, which rock has a greater velocity?

Answers

In the A case, v0=0, in the B case v0 >0, so v is greater in the B case. In other words, v is related to the kinetic energy, since the rock B has a larger kinetic energy in the beginning, it also has a larger kinetic energy (larger velocity) in the end.

The correct answer is that rock a has a greater velocity when each rock reaches the ground at the bottom of the cliff.

To understand why rock a has a greater velocity upon impact with the ground, let's consider the physics of free-falling objects under the influence of gravity. Both rocks are subject to the acceleration due to gravity, which is approximately[tex]\(9.81 \, \text{m/s}^2\)[/tex] downward.

For rock a, which is simply dropped from rest, its initial velocity is zero. The only force acting on it is gravity, pulling it downward. Its velocity at any time \(t\) before it hits the ground can be calculated using the equation for uniformly accelerated motion:

[tex]\[ v_{a} = u_{a} + gt \][/tex]

where[tex]\(v_{a}\)[/tex] is the final velocity, [tex]\(u_{a}\)[/tex] is the initial velocity (which is zero for rock a), [tex]\(g\)[/tex] is the acceleration due to gravity, and [tex]\(t\)[/tex] is the time of fall. Since [tex]\(u_{a} = 0\)[/tex], the equation simplifies to:

[tex]\[ v_{a} = gt \][/tex]

For rock b, which is thrown upward, its initial velocity[tex]\(u_{b}\)[/tex] is upward and has some positive value. As it rises, it slows down due to the acceleration due to gravity acting in the opposite direction of its motion. At its highest point, its velocity will be zero, and then it will start to fall back down, accelerating due to gravity until it hits the ground. The velocity of rock b just before impact can be calculated using the same equation for uniformly accelerated motion, but taking into account that it starts with an initial upward velocity and then reverses direction:

[tex]\[ v_{b} = u_{b} - gt_{up} + gt_{down} \][/tex]

where [tex]\(t_{up}\)[/tex]is the time it takes for rock b to reach its highest point and \[tex](t_{down}\)[/tex]is the time it takes to fall back to the ground. Since the acceleration due to gravity is the same for both rocks, and assuming that air resistance is negligible, the time of ascent [tex]\(t_{up}\)[/tex] for rock b is equal to the time of descent [tex]\(t_{down}\), so \(t_{up} = t_{down} = t/2\).[/tex] The equation for rock b's velocity upon impact becomes:

[tex]\[ v_{b} = u_{b} - g(t/2) + g(t/2) \] \[ v_{b} = u_{b} \][/tex]

Since rock a was dropped from rest, its velocity upon impact is due solely to the acceleration due to gravity over the entire time \(t\) of its fall, while rock b's velocity upon impact is its initial launch velocity minus the effect of gravity over half the time (as it rises) and plus the effect of gravity over the other half of the time (as it falls).

Because rock a starts from rest and only accelerates downward, it will have a greater velocity upon impact than rock b, which has its initial upward velocity reduced by the same gravitational acceleration over the time of its ascent and then increased by the same gravitational acceleration over the time of its descent. Thus, rock a's velocity at the moment of impact will be greater than rock b's velocity at the moment of impact, assuming they both hit the ground at the same time and air resistance is negligible.

A 500 kg cannon exerts a force of 600 N on a 10 kg cannon ball. Find (a) the acceleration of the cannon and (b) the acceleration of the cannon ball.

Answers

A 500 kg cannon exerts 600 N force on 10 kg cannon ball

Now here we can say that as per Newton's III law every action has equal and opposite reaction force

So here when cannon exert a force of 600 N on the ball then equal and opposite magnitude force will act on cannon itself

Part a)

Okay now we will find the acceleration of cannon using the same force

so as per Newton's formula

[tex]F = ma[/tex]

[tex]600 = 500 * a[/tex]

[tex]a = 1.2 m/s^2[/tex]

Part b)

Okay now we will find the acceleration of cannon ball using the given force

so as per Newton's formula

[tex]F = ma[/tex]

[tex]600 = 10 * a[/tex]

[tex]a = 60 m/s^2[/tex]

a toy friction car is propelled forward from rest by a girl's hand which causes it to reach a forward velocity of 3.5m/s in 0.4 seconds. it is then rreleased and later stops in 5.6 seconds.

a) what is the acceleration with which the car speeded up?

b)what is the acceleration with which the car slowed down?

c) how far did the toy car travel?

Answers

Answer:

a)  Acceleration = [tex]8.75m/s^2[/tex]

b) Slow down acceleration = 0.625[tex]m/s^2[/tex]

c) Car travels 9.8 m

Explanation:

  Acceleration = Change in velocity/Time

a) Change in velocity = 3.5-0 = 3.5 m/s

   Time = 0.4 seconds

    Acceleration = [tex]3.5/0.4=8.75m/s^2[/tex]

b) Change in velocity = 0 - 3.5 = -3.5 m/s

   Time = 5.6 seconds

   Acceleration = [tex]-3.5/5.6=-0.625m/s^2[/tex]

   Slow down acceleration = 0.625[tex]m/s^2[/tex]

c) We have equation of motion, [tex]v^2=u^2+2as[/tex], where u is the initial velocity, u is the final velocity, s is the displacement and a is the acceleration.

 Here v = 0 m/s, u = 3.5 m/s, a = -0.625[tex]m/s^2[/tex]

 Substituting

    [tex]0^2=3.5^2-2*0.625*s\\ \\ s=9.8m[/tex]

  So, car travels 9.8 m


Jonas sees this symbol in a circuit diagram.


Which circuit component does the symbol represent?

A) resistor
B) bulb
C) battery
D) voltmeter

Answers

The circuit component the symbol represents is: C) Battery

Explanation :

An electric circuit is a closed network consisting of an electrical component. It consists of a resistor, a battery, an ammeter, a voltmeter etc.

A symbol is given to every component.

The given symbol shows a battery. It consists of more than one cell and used as a power source in a circuit. It has two terminals i.e a positive terminal and a negative terminal.          

The positive terminal of a battery is a cathode and a negative terminal is an anode.    

Hence, the correct option is (C) " battery ".

a ball is thrown upwards at an unknown speed. in a time of
.5 second the ball has a height of 6 meters.

what is the initial speed of the ball?

what is the balls speed at a height of 6 meters?

what would be the balls maximum height? (hint: you dont know the time to reach maximum height)

Answers

Answer:

a)  Initial speed of the ball = 14.45 m/s

b) At height 6 m speed of ball = 9.55 m/s

c) Maximum height reached = 10.65 m

Explanation:

a)  We have equation of motion [tex]s=ut+\frac{1}{2} at^2[/tex], where s is the displacement, u is the initial velocity, t is the time taken and a is the acceleration.

s = 6 m, t = 0.5 seconds, a = acceleration due to gravity value = -9.8[tex]m/s^2[/tex]

 Substituting

    [tex]6=u*0.5-\frac{1}{2} *9.8*0.5^2\\ \\ u=14.45m/s[/tex]

 Initial speed of the ball = 14.45 m/s

 b) We have equation of motion [tex]v^2=u^2+2as[/tex], where v is the final velocity

   s = 6 m, u = 14.45 m/s, a = -9.8[tex]m/s^2[/tex]

    Substituting

        [tex]v^2=14.45^2-2*9.8*6\\ \\ v=9.55m/s[/tex]

  So at height 6 m speed of ball = 9.55 m/s

c) We have equation of motion [tex]v^2=u^2+2as[/tex], where v is the final velocity

   u = 14.45 m/s, v =0 , a = -9.8[tex]m/s^2[/tex]

   Substituting

     [tex]0^2=14.45^2-2*9.8*s\\ \\ s=10.65 m[/tex]

  Maximum height reached = 10.65 m

What Device can be used to increase voltage from a source of direct-current?

Answers

multi meter reading instruments Device can be used to increase voltage know direct-current

A child and her mother are at the park. The child walks around the rectangular park while her mom waits on a bench. The child returns to the bench, finishing her walk at the same place she started. The park is 411 meters wide and 475 meters long. What distance did the child walk? 195,000 m 886 m 1,772 m 0 m

Answers

the correct answer is 0

The child walked a total distance of 1772 meters, which is the perimeter of the rectangular park measured by adding together twice the length and twice the width of the park.

To find out the distance the child walked around the rectangular park, we calculate the perimeter of the rectangle. The park is mentioned to be 411 meters wide and 475 meters long. To compute the perimeter, we add the length of all four sides of the rectangle together:

Perimeter of rectangle = 2( length) + 2(width)

Perimeter of the park = 2(475 m) + 2(411 m)

Perimeter of the park = 950 m + 822 m

Perimeter of the park = 1772 m

Therefore, the child walked a total distance equal to the perimeter of the park which is 1772 meters.

When sugar is burned, water vapor and carbon dioxide are produced. A sugar molecule has a specific number of carbon, hydrogen, and oxygen atoms. Use the balanced chemical equation to identify the number of carbon, hydrogen, and oxygen atoms in sugar. Sugar + 12O2 ? 11H2O + 12CO2

Answers

Answer:

Number of carbon, hydrogen, and oxygen atoms in sugar:

C: 12H: 22O: 11

Explanation:

1) Given balanced chemical equation:

Sugar(s) + 12O₂(g) →  11H₂O(g) + 12CO₂(g)

2) Mass conservation law: in a chemical reaction, the atoms are not created nor destroyed; they recombine to form new substances, so the number of atoms of each kind in the reactants is equal to the number of atoms of the same kind in the products.


3) Balance.

-----------------------------------------------------------------------------------------------------

Atom          Products                    =            Reactants

-----------------------------------------------------------------------------------------------------

C                12CO₂ ⇒ 12               =             12 in sugar

-----------------------------------------------------------------------------------------------------

H               11H₂O ⇒ 11 × 2 = 22   =             22 in sugar

-----------------------------------------------------------------------------------------------------

O               12CO₂ ⇒ 12 × 2 = 24                12 × 2 = 24 in O₂ + x in sugar

                  11H₂O ⇒ 11

                 -----------------------------       --------------------------------------------------

                  24 + 11 = 35                =         24 + x

----------------------------------------------------------------------------------------------------

         

Solve for x: 35 = 24 + x ⇒  x = 35 - 24 = 11 ∴ 11 O atoms in sugar


Conclusion:

Number of carbon, hydrogen, and oxygen atoms in sugar:

C: 12H: 22O: 11

For this position-time graph, what is the average velocity for the entire curve?

A. -4 m/s
B. -10 m/s
C. +10 m/s
D. +4 m/s

Answers

A. Without doing much math, it can be seen from the graph that the altitude is decreasing. The slope of the position time graph determines velocity, so by comparing the start to the end of the graph, it can be seen that -100m was the change in altitude and 25 seconds was the change in time. Divide -100 by 25 to get -4m/s.
Final answer:

The average velocity for the entire curve on a position-time graph can be found by calculating the slope between the initial and final points. In this case, the average velocity is -4 m/s.

The correct answer would be Option A: -4 m/s.

Explanation:

To find the average velocity for the entire curve on a position-time graph, you can calculate the slope of the line connecting the initial and final points on the graph.

Identify the initial position and time on the graph.Identify the final position and time on the graph.Calculate the change in position by subtracting the initial position from the final position.Calculate the change in time by subtracting the initial time from the final time.Divide the change in position by the change in time to calculate the average velocity.

In this case, it looks like the curve has a downward slope, so the average velocity would be negative. Based on the given answer options, the correct answer would be Option A: -4 m/s.

Learn more about Average velocity here:

https://brainly.com/question/1375440

#SPJ2

Identify two factors that determine the intensity of sound

Answers

Amplitude and distance.

Dalton's model of an atom is best described as _____. A. A solar system B. A cloud C. A scoop of chocolate chip ice cream D. A solid sphere

Answers

Solid sphere is the correct answer.

Answer:

D) A Solid Sphere

Explanation:

As per Dalton's atomic description he said that atom is not divisible and that is the smallest part of atom.

It has no net charge and it can not be divided further. So till Dalton's theory of atom electron and nucleons were not discovered.

So we can consider atom as a model of Solid sphere  because similar to a solid sphere the atom is considered to be unique and not destructible.

So here correct answer will be

D) A Solid Sphere

Calculate the acceleration of a bus whose speed changes from 6 m/s to 12 m/s over a period of 3s.

Answers

Final answer:

The bus's acceleration, calculated using the formula for acceleration (change in velocity over change in time), is 2 meters per second squared (2 m/s²).

Explanation:

To calculate the acceleration of a bus whose speed changes from 6 m/s to 12 m/s over a period of 3 seconds, we use the formula for acceleration (a), which is the change in velocity (Δv) divided by the change in time (Δt). The change in velocity is the final velocity minus the initial velocity. In this case, the final velocity (vf) is 12 m/s and the initial velocity (vi) is 6 m/s. Thus, Δv = vf - vi = 12 m/s - 6 m/s = 6 m/s. The change in time, Δt, is 3 seconds.

Now, we plug these values into the formula:

a = Δv / Δt = (12 m/s - 6 m/s) / 3 s

a = 6 m/s / 3 s

a = 2 m/s²

Therefore, the acceleration of the bus is 2 meters per second squared (2 m/s²).

Which is defined as a disturbance in matter that carries energy from one place to another?

Answers

an acoustic wave carries energy

A mechanical wave----

The acceleration due to gravity on the moon is 1.6 m/s2, about a sixth that of Earth’s. Which accurately describes the weight of an object on the moon? An object on the moon is 1/6 times lighter than on Earth. An object on the moon is 1/6 times heavier than on Earth. An object on the moon is six times lighter than on Earth. An object on the moon is six times heavier than on Earth.

Answers

The answer is C.  

An object on the moon is six times lighter than on Earth.


The statement accurately describes the weight of an object on the moon is  An object on the moon is 1/6 times lighter than on Earth.

What is weight?

The weight is the product of mass of the object and acceleration due to gravity on the specific planet.

When the acceleration due to gravity is less, the weight measured will be less. The acceleration due to gravity on the moon is 1.6 m/s2, about a sixth that of Earth’s.

Thus, an object on the moon is 1/6 times lighter than on Earth.

Learn more about Weight.

https://brainly.com/question/10069252

#SPJ2

Are external computer flash drive can hold 1 gigabyte of data. How many bytes is this?

Answers

The prefix "giga..." means 1 billion. We talk about that flash drive as if its capacity is exactly 1 billion bytes.

But with digital things, a "giga..." Is actually 2^30 = 1,073,741,824 .

What are the two possible solutions to 5x^2−15=0?

Answers

I have attached the solution as image.

Final Answer:

The two possible solutions of [tex]5x^{2} - 5 = 0[/tex] are [tex]\( x = \pm \sqrt{3} \)[/tex].

Explanation:

To find the solutions to the quadratic equation [tex]\(5x^2 - 15 = 0\)[/tex], we first add 15 to both sides to isolate the term involving [tex]\(x^2\)[/tex], yielding [tex]\(5x^2 = 15\)[/tex]. Then, we divide both sides by 5 to solve for [tex]\(x^2\)[/tex], giving us [tex]\(x^2 = 3\)[/tex]. Taking the square root of both sides, we obtain [tex]\(x = \pm \sqrt{3}\)[/tex]. Therefore, the two possible solutions are [tex]\(x = \sqrt{3}\)[/tex] and [tex]\(x = -\sqrt{3}\)[/tex]. These solutions represent the values of x for which the equation is true.

two strong permanent magnets are placed one inch apart. which two fundamental forces will most affect them.
Weak and gravity
Strong and electromagnetic
Gravity and strong
Electromagnetic and gravity
An object is transported from Earth to deep space, far from any stars or planets. What happens to the mass and weight of the object?
Both the weight and mass of the object change.
Neither the weight nor the mass of the object change.
The weight of the object changes, the mass stays the same
The mass of the object changes, the weight stays the same

Answers

When two permanent magnets are placed adjacent to each other then they will exert magnetic force on each other.

There are four fundamental forces in nature

1. Gravitational force

2. Electromagnetic force

3. Weak Nuclear force

4. Strong nuclear force

So here magnets will exert two fundamental forces on each other Electromagnetic force and Gravity

#2

mass is defined as the composition or amount of substance while we can define weight as gravitational force of earth of the given object

Now when we transport an object from surface of earth to space far away from any planet then the amount of substance or mass will not change while the weight of the substance will decrease to zero because there is no gravity at this position

So we can say

mass = constant and will remain same

Weight = mass * gravity = 0

The weight of the object changes, the mass stays the same

Final answer:

The electromagnetic and gravitational forces are what affect two permanent magnets placed an inch apart, with electromagnetism being the stronger influence. If an object is moved to deep space, its weight changes due to reduced gravity, but its mass remains constant.

Explanation:

When two strong permanent magnets are placed one inch apart, the two fundamental forces that will most affect them are electromagnetic and gravity. The electromagnetic force is responsible for the interaction between the magnetic fields of the magnets, causing them to attract or repel each other depending on their poles. Despite being a very weak force in comparison, gravity also acts upon the magnets, although its effect is negligible compared to the electromagnetic force.

In the case of an object transported from Earth to deep space, the weight of the object changes, but the mass stays the same. Weight is the force exerted on an object by gravity, which would decrease significantly far from any stars or planets. However, mass is a measure of the amount of matter in an object, which remains constant regardless of location.

According to a simplified model of a mammalian heart, at each pulse approximately 20 g of blood is accelerated from 0.20 m/s to 0.32 m/s during a period of 0.08 s . What is the magnitude of the force exerted by the heart muscle?

Answers

Answer:

    Magnitude of the force exerted by the heart muscle  = 0.03 N

Explanation:

  We have force = mass * acceleration

   Acceleration = Rate of change of velocity = Change in velocity/time = (0.32-0.20)/0.08

                          = 0.12/0.08 = 12/8 = 1.5 [tex]m/s^2[/tex]

   Mass of blood = 20 g = 20/1000 kg = 0.02 kg

   Magnitude of the force exerted by heart muscle = 0.02*1.5 = 0.03 N

The magnitude of the force exerted by the heart muscle is 0.03 N.

From Newton's second law, we know that F = ma

Where;

F = force

m = mass of the body

a = acceleration

Now we must find the acceleration from:

a = v - u/t

a = acceleration

v = final velocity

u = initial veocity

t = time taken

Substituting values;

a = 0.32 m/s -  0.20 m/s/ 0.08 s

a = 1.5 m/s^2

Since F = ma

But m was given in grams and we must convert to kilograms so m = 0.002 Kg

Therefore;

F = 0.002 Kg × 1.5 m/s^2

F = 0.03 N

Learn more: https://brainly.com/question/946875

f a wave has a wavelength of 9 meters and a period of 0.006, what is the velocity of the wave? A. 1,200 m/s B. 1,500 m/s C. 1,800 m/s D. 1,285 m/s

Answers

Answer: 1500 m/sec. ( b )

Solution:

V= f (λ)

Speed = frequency. Wavelength  

And frequency = 1/time period

First we will find the frequency :

Frequency = 1/time period

1/0.006 = 166.67 Hz

Using this in the equation:

Speed = frequency. Wavelength  

V= f (λ)

9 × 166.67  

= 1500.03 ≈ 1500

V (Speed) = 1500 m/s.

Note: Do not forget to mention the units or otherwise they may cost you marks!


Answer:

B

Explanation:

Kat is creating a model to show how plate movements are linked to the formation of new rocks, and she is trying to place the steps in the correct order. Which step comes first?


The tectonic plates move apart from one another

Lava flows onto Earth's surface


magma forms beneath the plates and rises up through the cracks


Lava cools and hardens to form igneous rock

Answers

1. Tectonic plates move
2. Magma forms and rises through the cracks
3. Lava flows onto the Earth’s surface
4. Lava cools and hardens to form igneous rock

Igneous Rocks are rocks that are made from magma (molten lava). The correct order of the Igneous Rock formation is ACBD.

Igneous Rock:

These are the rocks made from magma (molten lava). The magma form in the upper mantle and lower crust because of very high temperature.

These rocks form,

Movement of a tectonic plate.The magma inside the crust rises from the cracks.Lava flows on the surface of the earth.When lava cools and crystallizes, it forms igneous rocks.

Therefore, the correct order of the Igneous Rock formation is ACBD.

Learn more about Igneous Rock:

https://brainly.com/question/2514852

which surface winds blow between the subtropical high and the equator

A) trade winds

B) polar easterlies

C) sea breezes

D) westerlies

Answers

Answer:

trade winds

Explanation:

In tropics regions on the lower portion of earth's atmosphere the surface winds are observed in prevailing pattern. In northern hemisphere the trade wind predominantly blows from north east. In southern hemisphere it flows from south east. Subtropical high and the equator is in between these areas.

Thus, trade wind blow between the subtropical high and the equator.


Answer:

trade winds

Explanation:

The color of a substance is a physical property. Please select the best answer from the choices provided T F

Answers

True. Bc a physical property is the appearance. A chemical property is like flammability. Hope this helps!

Answer:

True

Explanation:

Color is the splitting of light into different spectra. Light, by nature, is monochromatic. This means that it has one wave length. The prism experiment has proved that light has many colors. About 7 colors have been discovered.

The colors simply denote the different wavelengths of the "monochromatic" light. The colors are the different wavelengths of light when it is split.

The eye, sees color as a reflection. In the electron sense, color is as a result o electrons being "excited" or promoted from a lower orbital to a higher energy orbital.

Which of these are minerals? Select all that apply

A) mica

B) quartz

C) steam

D) copper

Answers

From that particular list:

Mica (A), Quartz (B), and Copper (D) are minerals.

Steam (C) isn't.

According to the electromagnetic spectrum, which wavelength is associated with the lowest energy level?

a.) visible

b.) ultraviolet

c.) gamma

d.) radio

Answers

Electromagnetic spectrum is the collection of electromagnetic waves arranged from low frequency electromagnetic waves to high frequency electromagnetic waves.

Electromagnetic waves are produced by electric charge that are accelerating. When a magnetic field combines with electric field electromagnetic waves are produced. The electric field and magnetic wave are perpendicular to one another in electromagnetic waves.


Below are the type of electromagnetic waves in electromagnetic spectrum: (from high frequency ---> low frequency)


Gamma rays - it is in the end of the electromagnetic spectrum, with highest frequency but shortest wavelength. Gamma rays are generated by radioactive substances.


X-rays - it is next to Gamma rays with respect to frequency but has longer wavelength.  This wavelength can penetrate metal. It was discovered by Wilhelm Conrad Roentgen in 1895.  


Ultraviolet -  ultraviolet waves or ultraviolet radiation have shorter wavelength compared to visible light. The main source of UV radiation is the sun.


Visible Light- among other electromagnetic waves, this the only electromagnetic wave that is visible to the naked eye. The waves inside the range of visible light are the colors. From red( longest wavelength inside visible light) to violet (shortest wavelength inside visible light).


Infrared - infrared radiation is beyond the red color on the visible length. Bodies on earth radiated infrared radiation.


Hope this helps, good luck.

Answer:

Radio waves.

Explanation:

Electromagnetic spectrum is an example of an electromagnetic waves which does not require material medium for its propagation. This electromagnetic spectrums are listed according to increase in their energy level i.e from Gamma ray to Radio waves

According to the their energy level, Gamma ray>X-ray>Ultraviolet rays>Visible light>Infrared rays>Radio waves.

This arrangement is also in terms of their increasing frequency and decreasing wavelength. This shows that radiowaves has the lowest energy level out of the electromagnetic spectrum

A glass is semifilled with liquid water and place in a room at 20 oc. after some time, part of the water evaporates. what happened to the average kinetic energy and the average potential energy of the water particles that escaped to the gas phase?

Answers

Water is placed at room temperature at 20 degree C

now after some water evaporate at room temperature

so here we can say speed of water molecules will not change as the temperature is same after evaporation

as we know that total kinetic energy is given by

[tex]KE = \frac{f}{2} nRT[/tex]

since temperature is same then energy will not change here

now as water evaporate to vapors then we can say that here all molecules are separated more in vapor phase so force of interaction will be less in this phase

And since potential energy depends on the force so potential energy will decrease in this phase

Final answer:

When water evaporates, the molecules that escape to the gas phase have an increase in average kinetic energy and a decrease in average potential energy.

Explanation:

When a liquid, such as water, evaporates, the molecules that escape into the gas phase have an increase in average kinetic energy and a decrease in average potential energy compared to when they were in the liquid phase.

The increase in average kinetic energy is due to the fact that molecules in the gas phase move faster than those in the liquid phase. This increase in kinetic energy allows the molecules to overcome the intermolecular forces and escape into the gas phase.

On the other hand, the decrease in average potential energy occurs because the intermolecular forces holding the liquid together are weaker than those between molecules in the gas phase. As a result, the average potential energy of the molecules that escape to the gas phase is lower.

Which is a correct reason to physically connect objects with a bond wire when transferring flammable liquids? A. To create a pathway for the liquid to flow easily B. To eliminate a difference in the static charge potential C. To lessen the likelihood of a spill

Answers

When Transferring Flammable Liquids - Option A

To create a pathway for the liquid to flow easily is a correct reason to physically connect objects with a bond wire when transferring flammable liquids. Physically connect the two conductive objects together with a bond wire to eliminate a difference in static charge potential among them. The bond wire is attached between the containers in the process of flammable filling liquid actions except for a metallic path is found.


Answer

Correct Option is A

Explanation:

Correct Option is A that is to create a pathway for the liquid to flow easily

Option B

This option is not correct because objects are not conductive.  

Option C

This option is also not correct because better options are there to lessen the spill

Hope this answer will help you


a toy friction car is propelled forward from rest by a girl's hand which causes it to reach a forward velocity of 3.5m/s in 0.4 seconds. it is then rreleased and later stops in 5.6 seconds

Answers

Answer:

a)  Acceleration = [tex]8.75m/s^2[/tex]

b) Slow down acceleration = 0.625[tex]m/s^2[/tex]

c) Car travels 9.8 m

Explanation:

  Acceleration = Change in velocity/Time

a) Change in velocity = 3.5-0 = 3.5 m/s

   Time = 0.4 seconds

    Acceleration = [tex]3.5/0.4=8.75m/s^2[/tex]

b) Change in velocity = 0 - 3.5 = -3.5 m/s

   Time = 5.6 seconds

   Acceleration = [tex]-3.5/5.6=-0.625m/s^2[/tex]

   Slow down acceleration = 0.625[tex]m/s^2[/tex]

c) We have equation of motion, [tex]v^2=u^2+2as[/tex], where u is the initial velocity, u is the final velocity, s is the displacement and a is the acceleration.

 Here v = 0 m/s, u = 3.5 m/s, a = -0.625[tex]m/s^2[/tex]

 Substituting

    [tex]0^2=3.5^2-2*0.625*s\\ \\ s=9.8m[/tex]

  So, car travels 9.8 m

Which is an example of the conversion of gravitational potential energy into kinetic energy?

Answers

a falling rain drop may be an example.

Answer:

When a ball is dropped from some height from rest then while its motion under gravity its initial gravitational potential energy converts into kinetic energy

Explanation:

When ball is placed at some height "h" above the floor at rest then initial gravitational potential energy is given as

[tex]U = mgh[/tex]

here we know

m = mass of the ball

g = acceleration due to gravity

h = height of the ball

now when ball is dropped from this height then its initial potential energy will convert into kinetic energy.

so speed of ball at some instant of time is given as

[tex]\frac{1}{2} mv^2 = mgh[/tex]

[tex]v = \sqrt{2gh}[/tex]

so here in this case gravitational potential energy will convert into kinetic energy of ball

Convenience sampling can be produce biased research results. True or false?

Answers

True is your answer.

Hope this helps....

whats the standard unit for measuring mass

Answers

Kilograms


The kilogram is the SI base unit of mass and is equal to the mass of the international prototype of the kilogram, a platinum-iridium standard that is kept at the International Bureau of Weights and Measures (BIPM)

Hope this helps!
The standard unit for measuring mass is kilograms.
Other Questions
The city of Minerva pays 916$ per year for health insurance for each of it's 72 municipal employees. What is the total cost that the city pays per year ? HELP ASAP PLEASE!!!When we measure something, we do not have specify what units we are measuring in. A. True B. False Which component is affected when a catalyst is added to a chemical reaction Work out the size of angle y. Which sentence is written in the active voice?A)Drew aimed his nerf gun at the target and pulled the trigger.B)The hot air balloon was filled with helium gas early this morning.C)The Outstanding Senior Award was given to our very own John Stevens.D)The limbs on the side of the road were picked up by the garbage truck. how do people join political parties?A) They pay duesB) They register to vote for a particular party C) They are invited to join D) They choose a party If a cat has 38 chromosomes in each of its body cells, how many chromosomes will be in each daughter cell after mitosis? A. 19 b. 76 c. 11 d. 38 (5,-7) (5,3) finding slope using formula. PLEASE HELP!!!2.Answer the following questions using the information from the nutrition facts label below. If you eat the entire bag, how many calories have you consumed? If you eat the entire bag, what percent of daily value of fat have you consumed? If you eat one serving, what percent of the daily value of saturated fat have you consumed? If you eat one serving, how many grams of dietary fiber have you consumed? Are there enough servings in this container to reach 100% of the recommended daily value for vitamin C? PLEASE HELP!!! At the time of the french and indian war how many soilders were in america (3a^3b^-2c^0d)^3/6a^3b^-8c*b^2d Which of these innovations made Gutenbergs printing press truly revolutionary? A)Gutenberg used movable metal type. B)Gutenberg created letters using wooden blocks. C)Gutenberg only printed on silk, allowing a more colorful product. D)Gutenberg used a rotary, or turning, press that speeded up the process. what does an authors claim contain? A) an opinion about a topic B) the support for the argument C) the entire argument D) the reasons for the claim Choose all that apply. In its early history, the Netherlands relied on these two corporations for money and in some ways, protection:Dutch South India CompanyDutch East India CompanyDutch Far East India CompanyDutch West India Company Margo borrows $400 agreeing to pay it back with 5% annual interest after 6 months. How much interest will she pay? how does Susan B. Anthony use rhythm in her speech "Speech after being convicted of voting" as a rhetorical tool? 6. Based on a comparison between the poem "Birthright" and the painting American Progress, which advantage does the visual art medium have over the text medium?The visual medium is better able to depict the pain of grappling with a difficult legacy.The visual medium is better able to express the specific thoughts of individuals.The visual medium is better able to show physical details of a vast landscape.The visual medium is better able to show change over time. What were the two whole numbers? Vertex of y=2x^2-16x+8 What product did the Cajun cowboys transport to steamboats?Question 5 options:A.CottonB.SugarC.CattleD.Indigo