Jeremy throws his ball up in the air, but the ball falls back to the ground. What force made the ball move without ever touching the ball?

Final answer:

The IUPAC name for the bromine-substituted organic compound depends on its structure; for the compound given, it is 2-bromobutanoic acid. Other examples include 2-bromopentane and 4-bromo-2-methylhexane. Hydroboration and radical addition reactions are key concepts related to the reactivity of compounds with bromine.

Explanation:

The student's question seems to focus on organic chemistry, specifically on the naming and reactivity of organic compounds with bromine ([tex]Br_{2}[/tex]).

The IUPAC name for the compound with a bromine atom at the alpha-carbon ([tex]C_{2}[/tex]) in the IUPAC system is 2-bromobutanoic acid, also known as alpha-bromobutyric acid in the common system. An example of a reaction with diborane and ethene is hydroboration, which leads to the synthesis of organoboron compounds. The organic reaction between ethene and bromine forms 1,2-dibromoethane, whereas ethane does not react with bromine under normal conditions.

In the case of 3-Bromobut-1-ene reacting with hydrogen gas, the product is butane. Radical addition reactions, such as the addition of HBr to 1-butene, can produce different products depending on the presence of peroxides. This phenomenon is an example of conflicting regioselectivity in organic chemistry.

When determining the IUPAC names of compounds, multiple examples are demonstrated ranging from 2-bromopentane to 4-bromo-2-methylhexane, highlighting the importance of the longest carbon chain and correct placement of substituents in naming.

Types of Bonds can be predicted by calculating the difference in electronegativity.

If, Electronegativity difference is,

                Less than 0.4 then it is Non Polar Covalent

                Between 0.4 and 1.7 then it is Polar Covalent 

                Greater than 1.7 then it is Ionic

For Be and F,

                    E.N of Fluorine          =   3.98

                    E.N of Beryllium        =   1.57

                                                   ________

                    E.N Difference                2.41          (Ionic Bond)

For H and Cl,

                    E.N of Chorine           =   3.16

                    E.N of Hydrogen        =   2.20

                                                   ________

                    E.N Difference                0.96          (Polar Covalent Bond)

For Na and O,

                    E.N of Oxygen          =   3.44

                    E.N of Sodium          =   0.93

                                                       ________

                    E.N Difference                2.51          (Ionic Bond)

For F and F,

                    E.N of Fluorine          =   3.98

                    E.N of Fluorine          =   3.98

                                                        ________

                    E.N Difference                0.00         (Non-Polar Covalent Bond)

Result:

           A polar covalent bond is formed between Hydrogen and Chlorine atoms.

The mole ratio of carbon dioxide to propane in the reaction C3H8 + 5O2 -> 3CO2 + 4H2O is 3:1. This ratio indicates that for every one mole of propane combusted, three moles of carbon dioxide are produced.

The mole ratio of carbon dioxide (CO2) to propane (C3H8) in the chemical reaction equation, C3H8 + 5O2 -> 3CO2 + 4H2O, is 3:1. This ratio is derived from the coefficients of carbon dioxide and propane in the balanced equation. The coefficient of carbon dioxide is 3 and the coefficient of propane is 1. This means, for every one mole of propane burned, three moles of carbon dioxide are produced.

This ratio is crucial in stoichiometry which deals with the relationship between reactants and products in a chemical reaction. In practical applications, such as in combustion reactions or in calculating emissions, knowing this ratio is essential. Hence, understanding this concept is not only important in academic terms but also in real-world scenarios.

https://brainly.com/question/14425689

#SPJ12

We have that the mol of CO₂. formed  is mathematically given as

The reaction will form 16.2 mol of CO₂.

Generally the equation for the Chemical Reaction  is mathematically given as

C₃H₈ + 5O₂ ----> 3CO₂ + 4H₂O

You want to convert moles of C₃H₈ to moles of CO₂

The molar ratio is 3 mol CO₂:1 mol C₃H₈

Moles of CO2= 5.5 mol C₃H₈ * (3 mol CO₂/1 mol C₃H₈)  

Moles of CO2=16.2

Therefore

The reaction will form 16.2 mol of CO₂.

For more information on Chemical Reaction visit

https://brainly.com/question/11231920

Final answer:

When 5.5 moles of propane are burned, 16.5 moles of carbon dioxide will be produced, based on the balanced chemical equation for the combustion of propane.

Explanation:

To determine how many moles of carbon dioxide will form if 5.5 moles of C3H8 (propane) is burned, we need the balanced chemical equation for the combustion of propane:

C3H8 + 5O2 → 3CO2 + 4H2O

According to the equation, the combustion of 1 mole of propane produces 3 moles of CO2. Thus, the combustion of 5.5 moles of propane will produce 3 times 5.5 moles of CO2, which equals 16.5 moles.

Therefore, 16.5 moles of carbon dioxide (CO2) will be produced when 5.5 moles of propane (C3H8) are burned completely in the presence of sufficient oxygen.

Answer:

opposite ions attract

The average atomic mass for lithium, given that Lithium-6 has a mass of 6.0151 amu and lithium-7 has a mass of 7.0160 amu, is 6.9417 amu

From the question given above, the following data were obtained?

Average atomic mass = [(Mass of 1st × 1st%) / 100] + [(Mass of 2nd × 2nd%) / 100]

= [(6.0151 × 7.42) / 100] + [(7.0160 × 92.58) / 100]

= 0.4463 + 6.4954

= 6.9417 amu

Learn more about average atomic mass:

https://brainly.com/question/24185848

#SPJ4

Answer:- P = 43.63% and O = 56.37% and the empirical formula is [tex]P_2O_5[/tex]

Solution:- mass of Phosphorous = 30.98 g

mass of product(phosphorous oxide) = 71.00 g

mass of oxygen = 71.00 - 30.98 = 40.02 g

percentage of phosphorous in the compound = (30.98/71.00)100 = 43.63%

percentage of oxygen in the compound = (40.02/71.00)100 = 56.37%

moles of P = 30.98 g x ( 1mol/30.97 g) = 1.00 mol

moles of O = 40.02 g x (1 mol/ 16.00 g) = 2.50 mol

Ratio of moles of P to O is 1.00:2.50

The whole number ratio is 2:5

So, the empirical formula of the phosphorous oxide formed is [tex]P_2O_5[/tex]

Answer : The percent composition of P = 43.63 % and O = 53.37 % .

Empirical formula of Phosphorous oxide = P₂O₅

Part A : Percent composition :

It is percent of each element present in compound . It is given by formula :

[tex] Percent composition = \frac{mass of element}{ total mass of compound } * 100 [/tex]

Given : Mass of Phosphorous (P ) = 30.98 g

Mass of Compound Phosphorous oxide = 71.00 g

Mass of Oxygen (O) = mass of compound - mass of P

= 71.00 g - 30.98 g = 40.02 g

[tex] Percent composition of P = \frac{mass of P }{ mass of compound} [/tex][tex] = \frac{30.98 g }{71.00 g} * 100 [/tex]

Percent composition of P = 43.63 %

[tex] Percent composition of O = \frac{mass of Al}{Mass of compound } * 100
= \frac{40.02 g }{71.00 g} * 100 [/tex]

Percent composition of O = 53.37 %

Part B : Empirical formula of Phosphorous Oxide.

Empirical formula is formula which shows the proportion of element present in a compound . Following are the steps to calculate empirical formula of an compound :

Step 1 : Find masses of each element .

Mass of P = 30.98 g

Mass of O = 40.02 g

Step 2 : Conversion of masses of element to its mole .

[tex] Mole = \frac{mass }{molar mass } [/tex]

Given : Mass of P = 30.98 g [tex] Molar mass of P = 30.97 \frac{g}{ mol} [/tex]

[tex] Mole of P = \frac{30.98 g }{30.97\frac{g}{mol} } = 1 mol [/tex]

Given: Mass of O = 40.02 g [tex] Molar mass of O = 15.99\frac{g}{mol} [/tex]

[tex] Mole of O = \frac{40.02 g}{15.99\frac{g}{mol}} = 2.5 mol [/tex]

Step 3 : Finding Ratio of mole .

In this step ratio is found by dividing each mole by smallest mole .Since mole of P is smaller , so this will be used for division.

[tex] Ratio of mole of P= \frac{mole of P }{mole of P } = \frac{1 mol}{1 mol} = 1 [/tex]

[tex] Ratio of mole of O = \frac{ mole of O }{mole of P } = \frac{2.5 }{1 } = 2.5 [/tex]

Hence , Ratio of P : O = 1 : 2.5

Since the ratio is in fraction , it need to be converted to whole number . So we multiply the ratio by such a minimum number which gives us a whole number ratio. This step is skipped if the ratio already comes in whole number.

On multiplication the ratio by 2 :

Ratio of P : O = ( 1 : 2.5 ) * 2 = 1 * 2 : 2.5 * 2

Ratio of P : O = 2 : 5

Step 4 : Writing the empirical formula

The ratio of P and O is 2: 5 , which gives the empirical formula of compound as P₂O₅ .

The reaction is
C₂H₄ + O₂ → CO₂ + H₂O

To balance the equation, both side have same number of elements. Here,

In left hand side has                                            in right hand side has

           4 H atoms                                                       2 H atoms 

           2 C atoms                                                       1 C atom 

           2 O atoms                                                       3 O atoms 

First, we have to balance number of C atoms and number of H atoms in both side.  
To balance C atoms, '2' should be added before CO₂ and to balance H atoms, '2' should be added before H₂O. 
Then number of oxygen atoms is 2 x 2 + 2 = 6 in right hand side. So, 3 should be added before O₂ in left hand side.
After balancing the equation should be,

C₂H₄ + 3O₂ → 2CO₂ + 2H₂O

Final answer:

In static friction between solids, friction is proportional to the normal force rather than object size, and dependent on microscopic surface interactions. In fluid friction, the frictional force depends on the object's size, particularly its cross-sectional area, and velocity, affecting aerodynamics and energy efficiency.

Explanation:

The relationship between the size of an object and the amount of friction that is present depends on the type of friction involved. When considering static friction between two solid surfaces, the frictional force is generally proportional to the normal force, and not directly to the size or contact area of the object. Microscopic interactions such as the deformation of surface irregularities play a role in how much of the surface area actually comes into contact and contribute to friction. This means that as the normal force increases, such as with a heavier object, so does the frictional force up to the maximum static friction limit.

On the other hand, when considering fluid friction - such as air resistance or water resistance - the frictional force does indeed depend on the size of the object, particularly its cross-sectional area. Fluid friction increases with velocity and larger objects often experience more drag due to a larger area facing the flow, which is why streamlined designs are often used to minimize this effect. The increase in fluid friction with cross-sectional area can significantly affect the performance and energy efficiency of moving vehicles.

In precipitation reactions, components of two compounds exchange to form a new, insoluble solid product, making them double-replacement reactions; however, not all products are liquids, nor does the reaction always involve a redox process. Option A is correct.

When considering which statements are true of precipitation reactions, we can confirm that:

They are also double-replacement reactions. This is true because in precipitation reactions, cations and anions from two different reactants exchange partners to form two new products, and typically one of these products is an insoluble solid that precipitates.

The products are liquids. This is not necessarily true as the defining characteristic of a precipitation reaction is the formation of a solid precipitate.

All of the solids are removed from the solution. While a solid precipitate forms and is often removed from the reaction mixture, this statement doesn't accurately describe the chemical nature of the reaction itself.

They are also redox reactions. Not all precipitation reactions are redox reactions; redox reactions involve the transfer of electrons, whereas precipitation reactions involve the exchange of ions without necessarily involving a change in oxidation state.

Hence, A. is the correct option.

Nitrogen fixation is the conversion of atmospheric nitrogen into biologically useful chemicals by microorganisms. Denitrification is the process by which bacteria convert nitrates into nitrogen gas. These processes have different functions in the nitrogen cycle.

Nitrogen fixation is the process where organisms convert atmospheric nitrogen into biologically useful chemicals. To date, the only known kind of biological organisms capable of nitrogen fixation are microorganisms. These organisms employ enzymes called nitrogenases, which contain iron and molybdenum. Many of these microorganisms live in a symbiotic relationship with plants, with the best-known example being the presence of rhizobia in the root nodules of legumes.

In contrast, denitrification is the process by which denitrifying bacteria convert nitrates (NO3) into nitrogen gas (N₂). Denitrifying bacteria utilize nitrate as an electron acceptor and break it down into nitrogen gas through an anaerobic respiration process. This process happens in anaerobic environments, like waterlogged soils or wetlands.

Star X may be moving, but its motion is not radial. Therefore, option (D) is correct.

Comparing the spectrum of Star X to a reference hydrogen spectrum can provide information about the motion of the star. If the spectral lines of Star X are shifted towards shorter wavelengths (blueshifted) compared to the reference hydrogen spectrum, it indicates that the star is moving towards the observer (Earth) due to the Doppler effect. Conversely, if the spectral lines are shifted towards longer wavelengths (redshifted) compared to the reference spectrum, it indicates that the star is moving away from the observer (Earth).

However, the given information does not specify whether the spectral lines are blueshifted or redshifted, so no definitive conclusion can be made about the direction of motion. Therefore, the correct option is D. Star X may be moving, but its motion is not radial.

Learn more about hydrogen spectrum, here:

https://brainly.com/question/21085153

#SPJ2