Job 593 was recently completed. The following data have been recorded on its job cost sheet: Direct materials $2,472 Direct labor-hours 74 labor-hours Direct labor wage rate $ 19 per labor-hour Machine-hours 134 machine-hours The Corporation applies manufacturing overhead on the basis of machine-hours. The predetermined overhead rate is $20 per machine-hour. The total cost that would be recorded on the job cost sheet for Job 593 would be:

Answers

Answer 1

Answer:

Total Cost Job 593 6557

Explanation:

Job 593

[tex]cost = materials + labor + overhead[/tex]

DM 2,471

DL 1,406 ( 74 labor hours x $19 labor rate)

FO 2,680 (134 machine hours x 20 FO rate)

Total Cost 6557

Remember, for Direct Labor and machien hours, you needto multiply the amount of hour applied in the job by the rate.


Related Questions

The Supplies account had a balance at the beginning of year 3 of $8900 (before the reversing entry). Payments for purchases of supplies during year 3 amounted to $53300 and were recorded as expense. A physical count at the end of year 3 revealed supplies costing $14900 were on hand. Reversing entries are used by this company. The required adjusting entry at the end of year 3 will include a debit to:

Answers

Answer:

supplies expense 47,300 DEBIT

  supplies   47,300 CREDIT

Explanation:

[tex]$$Beginning Inventory + Purchase = Ending Inventory + supplies Expense[/tex]

8,900 + 53,300 = 14,900 + supplies expense

8,900 + 53,300 - 14,900 = supplies expense

supplies expense = 47,300

Beginning and Purchase will be the supplies available during the period.

this supplies can be used or stored.

if the stored are 14,900 then the diference was used.

Final answer:

The required adjusting entry at the end of year 3 would include a debit to the Supplies Expense account for $47,300, which is the calculated value of supplies used during the year (beginning balance plus purchases minus the ending physical count).

Explanation:

The subject of this question is accounting, specifically related to the adjusting entries at year-end for the supplies account balance. When a physical count reveals that the supplies on hand at the end of the year cost $14,900, and the company had a beginning balance of supplies of $8,900, we need to account for the supplies used during the year. During year 3, payments for purchases of supplies amounted to $53,300 and were recorded as an expense. However, we need to adjust the expense to reflect the actual supplies used.

To do this, we would calculate the supplies used as follows:

Beginning balance of supplies: $8,900

Add: Purchases of supplies during the year: $53,300

Less: Ending balance of supplies: $14,900 (physical count)

Equals: Supplies expense for the year (supplies used): $47,300

The required adjusting entry at the end of year 3 would therefore include a debit to Supplies Expense for the value of supplies used ($47,300) and a credit to the Supplies account for the same amount, assuming the company had initially debited Supplies Expense when the supplies were purchased.

The reversing entry, typically done at the beginning of the new year, would reverse this process, making the books ready for the new year's transactions.

For the employees who left the company before 3 years, what is an appropriate test of hypothesis to determine if the mean tenure of such employees equals 18 months in the population? One sample t test Paired samples t test Independent samples t test None of the above

Answers

Answer:

Here one sample t test would be the appropriate test of hypothesis to determine if the mean tenure  of employees equals 18 months in the population.

Explanation:

Here we will use one sample t test because in this situation we are comparing a single sample mean to a determined constant and through this we are trying to find out whether there is any statistical difference between sample mean and a know population mean.

Final answer:

The appropriate test to determine if the mean tenure of employees who left the company before 3 years equals 18 months is the one sample t-test. This test compares the sample mean to a known value when the population standard deviation is unknown, and it is suitable for small samples or normally distributed populations.

Explanation:

To determine if the mean tenure of employees who left the company before 3 years equals 18 months, the appropriate test of hypothesis is the one sample t-test. This is because we are comparing the mean tenure of a single sample of employees to a known value (18 months) without comparing it to another sample. The one-sample t-test is especially useful when the population standard deviation is unknown the sample size is relatively small or the population is assumed to be normally distributed.

In conducting the one sample t-test, the null hypothesis (H0) posits that the mean tenure (µ) of employees equals 18 months, whereas the alternative hypothesis (Ha) suggests that the mean tenure is different from 18 months. This constitutes a two-tailed test because the alternative hypothesis does not specify whether the mean tenure is less than or greater than 18 months; it only states that it is not equal to 18 months.

Pablo Management has ten part-time employees, each of whom earns $135 per day. They are paid on Fridays for work completed Monday through Friday of the same week. Near year-end, the ten employees worked Monday, December 31, and Wednesday through Friday, January 2, 3, and 4. New Year's Day. (January 1) was an unpaid holiday.
A) Prepare the adjusting entry that would be recorded on Monday, Dec 31.
B) Prepare the journal entry that would be made to record payment of the eployees' wages on Friday Jan 4.

Answers

Final answer:

The adjusting entry on December 31st for Pablo Management would be a debit to Wage Expense for $1,350 and a credit to Wages Payable for $1,350 to account for one day's wages. The journal entry on January 4th would include a debit to Wage Expense for $4,050 and Wages Payable for $1,350, with a credit to Cash for $5,400 to cover the wages for the four days worked, excluding the unpaid holiday.

Explanation:

To answer the student's question regarding the adjusting and journal entries to be made for Pablo Management's employee wages, we must consider the following:

Adjusting Entry on December 31

An adjusting entry is recorded to recognize expenses incurred but not yet paid. Since the employees worked on Monday, December 31st, but not on New Year's Day, we record the wages for one day.

The adjusting entry on December 31 would be:


 Debit Wage Expense: $135 × 10 employees = $1,350
 Credit Wages Payable: $1,350

This reflects the expense incurred for the day worked in December.

Journal Entry on January 4

The journal entry to record the payment of the employees' wages on Friday, January 4th, must account for the four days worked in the week after excluding the unpaid holiday on January 1st.


 Debit Wages Payable: $1,350
 Debit Wage Expense: $135 × 10 employees × 3 days = $4,050
 Credit Cash: $1,350 + $4,050 = $5,400

The total wages paid on January 4 account for both the payable recognized on December 31 and the wages earned from January 2 to January 4.

Direct materials used LO C5 3M Co. reports beginning raw materials inventory of $902 million and ending raw materials inventory of $855 million. 3M purchased $3,646 million of raw materials during the year. What is the amount of raw materials it used during the year?

Answers

Answer:

Raw materials used during the year 3,693 MILLONS

Explanation:

From the intentory Identity we can solve for used raw materials

[tex]$$Beginning Inventory + Purchase = Ending Inventory + USED[/tex]

We post the know values, and solve for the unknow values:

[tex]902 + 3,646 = 855 + USED\\902 + 3646 - 855 = 3,693[/tex]

Raw materials used during the year 3,693 MILLONS

Notice: This identity can be use anytime you have partial information about inventory to get the missing data.

A quality control inspector has drawn a sample of 18 light bulbs from a recent production lot. If the number of defective bulbs is 2 or more, the lot fails inspection. Suppose 30% of the bulbs in the lot are defective. What is the probability that the lot will fail inspection? Round your answer to four decimal places.

Answers

Answer: 0.9858

Explanation:

Binomial distribution formula

[tex]P(X=x)=^nC_x\ p^x\ (1-p)^{n-x}[/tex], where P(x) is the probability of getting success in x trials , n is total number of trials and p is the probability of getting success in each trial.

Given : The probability that bulbs in the lot is defective = 0.30

Sample size = 18

If the number of defective bulbs is 2 or more, the lot fails inspection.

Then , the probability that the lot will fail inspection is given by :-

[tex]P(X\geq2)=1-(P(X<2))\\\\=1-(P(0)+P(1))\\\\=1-(^{18}C_0\ (0.3)^0 (1-0.3)^{18}+^{18}C_1\ (0.3)^1 (1-0.3)^{17})\\\\=1-((0.3)^0 (0.7)^{18}+18(0.3)^1 (0.7)^{17})\approx0.9858[/tex]

Hence, the probability that the lot will fail inspection =0.9858

Answer:

There is a 98.58% probability that the lot will fail inspection.

Explanation:

For each light bulb in the production lot, there are two possible outcomes. Either they are defective, or they are not. This means that we can solve this problem using concepts of the binomial probability distribution.

Binomial probability distribution

The binomial probability is the probability of exactly x successes on n repeated trials, and X can only have two outcomes.

[tex]P(X = x) = C_{n,x}.p^{x}.(1-p)^{n-x}[/tex]

In which [tex]C_{n,x}[/tex] is the number of different combinatios of x objects from a set of n elements, given by the following formula.

[tex]C_{n,x} = \frac{n!}{x!(n-x)!}[/tex]

And p is the probability of X happening.

In this problem we have that:

There are 18 light bulbs, so [tex]n = 18[/tex].

30% of the bulbs in the lot are defective. This means that [tex]p = 0.3[/tex].

If the number of defective bulbs is 2 or more, the lot fails inspection. Suppose 30% of the bulbs in the lot are defective. What is the probability that the lot will fail inspection?

This is [tex]P(X \geq 2)[/tex].

Either there are 2 or more defective bulbs, or there are less than two. The sum of the probabilities of these events is decimal 1. So:

[tex]P(X < 2) + P(X \geq 2) = 1[/tex]

[tex]P(X \geq 2) = 1 - P(X < 2)[/tex]

In which

[tex]P(X < 2) = P(X = 0) + P(X = 1)[/tex]

So

[tex]P(X = x) = C_{n,x}.p^{x}.(1-p)^{n-x}[/tex]

[tex]P(X = 0) = C_{18,0}.(0.30)^{0}.(0.70)^{18} = 0.0016[/tex]

[tex]P(X = 1) = C_{18,1}.(0.30)^{1}.(0.70)^{1t} = 0.0126[/tex]

[tex]P(X < 2) = P(X = 0) + P(X = 1) = 0.0016 + 0.0126 = 0.0142[/tex]

Finally

[tex]P(X \geq 2) = 1 - P(X < 2) = 1 - 0.0142 = 0.9858[/tex]

There is a 98.58% probability that the lot will fail inspection.

The U.S. Supreme Court ruled that cities could have school voucher programs that give money directly to parents, who could then choose among competing schools, public or private. The ideas was to create competition among schools. Like businesses, schools were expected to improve their services (e.g., how effectively they teach) to win students from competitors. The result would be improvement in all schools, private and public, to benefit many students. Do you believe that such economic principles apply in both private and public organizations?

Answers

Answer:

No, I don't beliave

Explanation:

The classic economic model is based on the price competition system. This is a beneficial system for consumers who will pay a lower price as a result of competition. This works well in some sectors, but not all, such as schools.

In my view, the school cannot be used as a commodity. Schools have different structures for the same purpose, so some differ in their educational approach. If a competitive system is in place, it will pressure schools to streamline education to lower costs and maximize school profit - just as companies do. It turns out that a school does not have the same purpose as companies. The company aims for profit while the school aims to educate.

Final answer:

School choice programs promote competition among schools, encouraging improvement in services to attract students, aligning with economic principles applicable to both private and public organizations.

Explanation:

School voucher programs were designed to create competition among schools, public and private, with the belief that schools would improve their services to attract students. This concept is rooted in economic principles applicable to both private and public organizations.

The idea behind vouchers is that increased competition among schools leads to improved educational outcomes. This competition encourages schools to strive for excellence in order to attract students, similar to how businesses operate in a competitive market.

Although the impact of school choice programs on academic achievement and public school funding is still being studied, the competitive nature of these programs mirrors the economic principles of competition and improvement seen in private and public organizations.

Skelton Brush Company sells standard hair brushes. The following information summarizes Skelton's operating activities for 2017. Selling and Administrative Expenses $44,000 Purchases 89,500 Net Sales Revenue 142,300 Merchandise Inventory, January 1, 2017 11,650 Merchandise Inventory, December 31, 2017 14,400 Calculate the operating income for 2017.

Answers

Answer:

The operating income for 2017 is $11,550

Explanation:

For computing the net income, first we have to calculate the cost of goods sold which is shown below:

Cost of goods sold = Opening merchandise inventory + Purchase - Closing inventory

= $11,650 + $89,500 - $14,400

= $86,750

Now, we know that if we deduct the cost of goods sold from sales, than gross profit is come.

So, Sales - Cost of goods sold = Gross profit

$142,300 - $86,750 = Gross Profit

Gross Profit = $55,550

Now deduct the Selling and Administrative Expenses from gross profit, so that net income can computed

So, Gross profit -  Selling and Administrative Expenses = Net income

$55,550 - $44,000 = Net income

Net income = $11,550

Hence, the operating income for 2017 is $11,550

if the total cost for producing widgets can be represented by TC = 8,000 + 0.75X, where X is the number of widgets produced and total revenue can be represented by TR = 4X, what is the breakeven value for number of widgets produced?

Answers

Answer: The breakeven value for the number of widgets produced is 2462.

Explanation:

The Breakeven point is the point where the total revenue of a particular firm is equal to the total cost of that firm,

TR = TC

4X = 8000 + 0.75X, where X is number of widgets produced

3.25X = 8000

X = [tex]\frac{800000}{325}[/tex]

X = 2462

So, this is the breakeven value for the number of widgets produced.

Montero Co. holds 100,000 common shares (40%) of ORD Corp. as a long-term investment. ORD Corp. paid a $100,000 dividend on November 1, 2017, and reported a net income of $700,000 for 2017. Prepare entry to record the receipt of the dividend and the December 31, 2017, year-end adjustment required for the investment account.

Answers

Answer:

Cash                         40,000

               ORD Corp              40,000

to record the cash payment of ORD Corp

ORD Corp                280,000

          Gain on Investment/ ORD Corp     280,000

to record the proportional net income of ORD Corp

Explanation:

100,000 x 40% = 40,000

700,000 x 40% = 280,000

The cash is treated as moving money from one place to another

It is moving from the company you have a degree of control, from your company. It increase your cash and decrease the Investment

The net incoem will be the gain in the investment, adn will impact the invstment asset and the gain on investment

House Loan. Suppose you take out a home mortgage for $180,000 at a monthly interest rate of 0.5%. If you make payments of $1000/month, after how many months will the loan balance be zero?

Answers

Answer:

It will be after 462 months

Explanation:

We use the annuity formula for present value

[tex]C * \frac{1-(1+r)^{-time} }{rate} = PV\\[/tex]

We post our know values and start solving for time:

[tex]1000 * \frac{1-(1+0.005)^{-time} }{0.005} = 180,000[/tex]

First we clear the dividend:

[tex]1-(1+0.005)^{-time} = 180,000/1000\times 0.005[/tex]

Then we clear for the power

[tex](1.005)^{-time} = 1-0.9[/tex]

We set up the formula using logarithmic

[tex]log_{1.005}\: 0.1 = -time[/tex]

And use logarithmic properties to solve for time:

[tex]\frac{log\:0.1}{log\:1.005} = -time[/tex]

[tex]-461.6673541 = -time[/tex]

time 462 months

Allowance Method of Accounting for Bad Debts— Comparison of the Two Approaches. Kandel Company had the following data available for 2014 (before making any adjustments):
Accounts receivable, 12/31/14 $320,100 (Dr.)
Allowance for doubtful accounts 2,600 (Cr.)
Net credit sales, 2014 834000 (Cr.)
Required:1. Prepare the journal entry to recognize bad debts under the following assumptions: (a) bad debts expense is expected to be 2% of net credit sales for the year and (b) Kandel expects it will not be able to collect 6% of the balance in accounts receivable at year-end.2. Assume instead that the balance in the allowance account is a $2,600 debit. How will this affect your answers to part (1)?

Answers

Answer:

(A) bad debt expense 16,680 debit

  allowance for doubtful accounts 16,680 credit

(B) bad debt expense 16,606 debit

  allowance for doubtful accounts  16,606 credit

2.-

(A) will not change, we are adjusting for the "% of sales regardless of the beginning balance

(B) bad debt expense 16,806 debit

  allowance for doubtful accounts  21,806 credit

Explanation:

(A)

bad debt expense expected as 2% of credit sales

834,000 x 2% = 16,680

we are recognizing the bad debt expense, so we directly record for this amount

(B)

uncolectible 6% of AR

ending baaance we expect this as uncollectible amount

ending balance 6% of 320,100 19,206

current balance allowance       (2,600) credit

adjustment                                16,606

2.- B

ending balance 6% of 320,100 19,206

+ current balance allowance       2,600 debit

adjustment                                21,806

Stellan Manufacturing is considering the following two investment​ proposals: Proposal X Proposal Y Investment $ 720 comma 000 $ 512 comma 000 Useful life 5 years 4 years Estimated annual net cash inflows received at the end of each year $ 150 comma 000 $ 110 comma 000 Residual value $ 58 comma 000 ​$0 Depreciation method Straight Minusline Straight Minus Line Annual discount rate ​10% ​9% Present value of an ordinary annuity of​ $1: ​8% ​9% ​10% 1 0.926 0.917 0.909 2 1.783 1.759 1.736 3 2.577 2.531 2.487 4 3.312 3.240 3.170 5 3.993 3.809 3.791 6 4.623 4.486 4.355 Compute the present value of the future cash inflows from Proposal Y.

Answers

Answer:

Present value of future cash inflows of Project Y = $110,000 X 3.240 = $356,400

Explanation:

Provided cost of Proposal Y = $512,000

Residual Value = $0

Depreciation will not be considered as we need to consider the present value of future cash flows, depreciation does not involve any cash flow.

Useful life = 4 years

Estimated cash inflow per year = $110,000

Discount rate = 9%

Present Value of an Ordinary Annuity = 3.240 @ 9% for 4 years

Thus present value of future cash inflows = $110,000 X 3.240 = $356,400

Note: Net Present Value = Present Value of Cash Inflows - Present Value of  Cash Outflow = $356,400 - $512,000 = -$155,600

Final Answer

Present value of future cash inflows of Project Y = $110,000 X 3.240 = $356,400

Final answer:

The present value of future cash inflows for Proposal Y is computed by multiplying the annual net cash inflow ($110,000) by the present value of an ordinary annuity for 4 years at a 9% discount rate (3.240), which results in $356,400.

Explanation:

Given the parameters for Proposal Y: the estimated annual net cash inflow is $110,000 for 4 years with an annual discount rate of 9%. To compute the present value (PV) of the future cash inflows from Proposal Y, we have to multiply the annual net cash inflow by the present value of an ordinary annuity for 4 years at 9%.

From the provided annuity table, the present value factor for 4 years at 9% discount rate is 3.240. Therefore, the present value of future cash inflows from Proposal Y is $110,000 * 3.240 = $356,400.

Learn more about Present Value Calculations here:

https://brainly.com/question/32913881

#SPJ6

Most organizations with strong ethical climates usually focus on the core value of placing _____ interests first. customers' employees' stockholders' suppliers' distributors'

Answers

The answer is A. Customers’

Final answer:

Organizations with a strong ethical climate prioritize customers' interests, leading to positive job attitudes and ethical behavior. These companies value fairness, supportiveness, and respect for individual rights, which promotes a culture where people are considered the greatest asset.

Explanation:

Most organizations with strong ethical climates usually focus on the core value of placing customers' interests first. This emphasis on customer-centric values aligns with fostering a set of shared values within the organization, ensuring that employees are encouraged and motivated to treat others the way they would like to be treated themselves. By prioritizing customers' needs and establishing an ethical foundation, companies can enhance job attitudes, behaviors, and overall ethics, leading to a work environment where people are happier, more committed, and demonstrate a stronger attachment to their organization. Moreover, a customer-focused approach contributes to long-term relationships based on ethics and trust, crucial for the sustained success of any business.

People-oriented cultures hold fairness, supportiveness, and respect for individual rights in high regard, and this is exemplified in the way they treat both their employees and customers. Companies that live by the principle that 'people are their greatest asset' create an atmosphere where employees do not feel compelled to choose between work and their personal lives, leading to healthier job attitudes and citizenship behaviors that benefit the organization as a whole. As Heineman (2007) asserts, when behaving ethically becomes part of the company's core values, it is reflected in the company's metrics and overall operations.

The stock of North American Dandruff Company is selling at $80 per share. The firm pays a dividend of $2.50 per share. (a) What is the dividend yield? (Round your answer to 3 decimal places. Omit the "%" sign in your response.) (b) If the firm has a payout rate of 50 percent, what is the firm’s P/E ratio? (Enter numeric value only.)

Answers

Answer:

(a) Dividend Yield = 3.125 percent

(b) P/E Ratio = 16 times

Explanation:

(a) Dividend yield = [tex]\frac{Current year dividend}{Price of the share}[/tex] X 100

Current year dividend = $2.5

Company's selling price of share = $80

Dividend yield = [tex]\frac{2.5}{80} X100[/tex] = 3.125 percent

(b) Given payout ratio is 50 percent that means earnings X 50% = $2.5

Earnings = [tex]\frac{2.5}{0.5}[/tex] = $5

P/E ratio = Price / Earnings = $80/$5 = 16 times.

Dividend Yield = 3.125 percent

P/E Ratio = 16 times

The following balance sheet information is provided for San Juan Company for 2014: Assets Cash $ 6,650 Accounts receivable 7,950 Inventory 11,550 Prepaid expenses 2,500 Plant and equipment, net of depreciation 18,400 Land 13,000 Total assets $ 60,050 Liabilities and Stockholders' Equity Accounts payable $ 3,150 Salaries payable 7,640 Bonds payable (Due in 2020) 15,400 Common stock, no par 18,600 Retained earnings 15,260 Total liabilities and stockholders' equity $ 60,050 What is the company's debt to equity ratio? (Round your final answer to 2 decimal places.) Multiple Choice 129.29% 45.48% 77.35% 31.87%

Answers

Answer: option c

Explanation: Debt equity ratio is ratio of the total amount of debt due on a company to the total amount of equity invested in it . It is generally used to evaluate the solvency of the company. It is computed as follows :-

[tex]=\:\frac{debt}{equity}[/tex]

[tex]=\:\frac{accounts\:payable+salary\:payable\:+bonds\:payable}{common\:stock\:+retained earnings}[/tex]

[tex]=\:\frac{3150\:+\:7640\:+\:15,400}{18,600\:+15,260}[/tex]

      = 77.35%

Yard Tools manufactures lawnmowers, weed-trimmers, and chainsaws. Its sales mix and unit contribution margin are as follows.



Sales Mix


Unit Contribution

Margin


Lawnmowers 20 % $30

Weed-trimmers 50 % $20

Chainsaws 30 % $40


Yard Tools has fixed costs of $4,200,000.


Compute the number of units of each product that Yard Tools must sell in order to break even under this product mix.

Answers

Answer:

45,000 Chainsaws

75,000 Weed-trimmers

30,000 Lawnmowers

Explanation:

Contribution Margin Mix

We are going to multiply the contribution margin of the product, by their sales proportion. The we add the mix contribution of each product to get the contribution margin for the mix.

Lawnmowers 20 % $30 = 6

Weed-trimmers 50 % $20 = 10

Chainsaws 30 % $40 = 12

Total Mix Contribution 28

Next we calculate the BEP in units as usual

[tex]\frac{Fixed\:Cost}{Contribution \:Margin} = Break\: Even\: Point_{units}[/tex]

4,200,000/ 28 = 150,000 Mix units

Now we multiply the mix units by each product weight to get the sales for each product.

150,000 x 20% = 30,000 Lawnmowers

150,000 x 50% = 75,000 Weed-trimmers

150,000 x 30% = 45,000 Chainsaws  

Final answer:

Yard Tools must sell a total of 150,000 units to break even. This translates into 30,000 lawnmowers, 75,000 weed-trimmers, and 45,000 chainsaws, according to their sales mix.

Explanation:

To solve this problem, we need to calculate the weighted average contribution margin per unit (WACM), and then divide the fixed costs by this figure. The percentage of sales mix is the 'weight' of each product, and the unit contribution margin is the 'value'.

So, to calculate the WACM:

For Lawnmowers that's 0.20 (or 20%) times $30, which gives us $6.For Weed-trimmers it's 0.50 times $20, which gives us $10.And for Chainsaws it's 0.30 times $40, which gives us $12.

Summing these up, we get a total WACM of $28. Then, we must divide the fixed costs by the WACM to calculate the total number of units Yard Tools must sell to break even.

That is $4,200,000 divided by $28, which equals 150,000 units in total. Given the mix, Yard Tools must sell 30,000 Lawnmowers (20% of 150,000) , 75,000 Weed-trimmers (50%), and 45,000 Chainsaws (30%) to break even.

Learn more about Break Even Analysis here:

https://brainly.com/question/33717502

#SPJ3

Lewis Brown bought four lots of land for $100,000. On the date of purchase, the lots had the following fair market values:Lot #1$25,000Lot #2$31,250Lot #3$20,625Lot #4$48,125What is the basis to Lewis of Lot #3?

Answers

Answer:

Basis of Lewis of Lot #3 = $16,500

Explanation:

Total of all the lots = $25,000 + $31,250 + $20,625 + $48,125 = $125,000

Since the land is purchased for $100,000

The basis for each dollar = $100,000/$125,000 = $0.8 for each dollar

Thus for Lot #3 basis = $0.8 X $20,625 = $16,500

Note: The basis is calculated so that directly the lot value is not considered as the total cost is only 80% of total lot value.

Basis of Lewis of Lot #3 = $16,500

Martinez Corp. purchased a delivery van with a $57000 list price. The company was given a $5400 cash discount by the dealer, and paid $2600 sales tax. Annual insurance on the van is $1200. As a result of the purchase, by how much will Martinez Corp. increase its van account?

Answers

Final answer:

After purchasing a delivery van, Martinez Corp. will increase its van account by $55,400. This sum includes the net purchase cost, sales tax, and annual insurance.

Explanation:

Martinez Corp. will increase its van account by the net purchase price of the van, additional costs related to the purchase such as sales tax, and any operational costs like insurance. First, we subtract the discount from the list price to get the net purchase price: $57,000 - $5,400 = $51,600. Next, we add the sales tax to the purchase price: $51,600 + $2,600 = $54,200. And finally, we add the annual insurance cost: $54,200 + $1,200 = $55,400.

Therefore, Martinez Corp. will increase its van account by $55,400.

Learn more about Purchase Price and Operational Costs here:

https://brainly.com/question/26851001

#SPJ3

"In the past few years, McDonald’s has made a lot of changes to its menu, adding more healthy choices and more higher-priced items, such as those offered in McCafé (e.g., premium roast coffee, antibiotic-free chicken, and fruit smoothies), and has also enhanced its in-restaurant services (e.g., free, unlimited Wi-Fi; upgraded interiors). Did McDonald’s new priorities—in terms of a broader, healthier menu and an improved in-restaurant experience—require changes to its traditional value chain activities? If so, how? Try to be as specific as possible in comparing the McDonald’s from the recent past (focusing on low-cost burgers) to the McDonald’s of today."

Answers

Answer: This can be explained as follows:-

Explanation: MCdonalds change in menus and adding more healthy choices does brings change in the traditional value chain of the company.

In traditional times company was mainly focused towards the taste of the product and  to make the service as fast and as efficient as possible but now the company is taking care of the health of its customers. Company wants to attract new customer base of health conscious people. In traditional times company's aim was to make quick service to get the tables ready every time a customer walks in but today company wants to make the restaurant a place where people can sit and enjoy their meal for a while and company is taking help of technology in this.

Answer:

cerngscfhdugesh sorry was cleaning keyboard

Explanation:

An entrenpeneur knits sweaters for sale. The entrenpeneur has fixed costs of $100. When he makes 10 sweaters in one month, he must spend $15 on wool. When he makes 11 sweaters in one month, he must spend $17 on wool. If he has no other cost, what is the marginal cost?

Answers

Answer:

marginal cost = $2

Explanation:

given data:

cost on wool when 10 sweater made in one month = $15

cost on wool when 11 sweater made in one month = $17

fixed cost = $100

In case of no other cost present, marginal cost is given by

Marginal cost = cost of eleven sweaters - cost of ten sweaters

                       = $17 -$15

                       = $2

Tyson is a 25% partner in the KT Partnership. On January 1, KT makes a proportionate distribution of $16,000 cash, inventory with a $16,000 fair value (inside basis $8,000), and land with a fair value of $8,000 (inside basis of $12,000) to Tyson. KT has no liabilities at the date of the distribution. Tyson's basis in his KT partnership interest is $24,000. What is Tyson's basis in the distributed inventory and land?

Answers

Answer:

Tyson's basis in the distributed inventory = $8,000 and land = $12,000

Explanation:

Total basis value of assets received by Tyson = Cash + Inventory + Land

= $16,000 + $8,000 + $12,000 = $36,000

For this Tyson's basis of interest in partnership = $24,000

Thus Tyson's Basis in Inventory = $8,000

Tyson's basis for Land = $12,000

Note: the basis is book value and not the market value even in case it is less than book value.

Tyson's basis in the distributed inventory = $8,000 and land = $12,000

Final answer:

Tyson's basis in the distributed inventory and land from KT Partnership is respectively $2,000 and $3,000, computed by taking his 25% ownership of the inside basis.

Explanation:

In this business scenario involving partnership distribution, Tyson's basis in the distributed inventory and land can be calculated based on the inside basis. For the inventory, Tyson would take his ownership percentage (25%) of the inside basis which results in $2,000 ($8,000 * 0.25). Similarly, for the land, he would take 25% of the inside basis, amounting to $3,000 ($12,000 * 0.25). Therefore, Tyson's basis in the distributed inventory is $2,000 and $3,000 in the land.

Learn more about Partnership Distribution here:

https://brainly.com/question/31793972

#SPJ3

Abby purchased 100 shares of her dad’s favorite stock for $25.80 per share exactly 1 year ago, commission free. She sold it today for a total amount of $2865. She plans to invest the entire amount in a different corporation’s stock today, but must now pay a $50 commission fee. If she plans to sell this new stock exactly 1 year from now and realize the same return as she has just made, what must be the total amount she receives next year? Include the commission fee as a part of the purchase price, but neglect any tax effects.

Answers

Final answer:

Abby made a return of $285 on the first stock and then reinvested $2815 after taking a commission fee into account. To realize the same return, she needs to receive $3100 next year.

Explanation:

Let's start by calculating the return Abby made on the first stock. She bought the stock for $25.80 per share, buying a total of 100 shares which leads to an investment of $25.80 * 100 = $2580. She then sold the stocks for a total of $2865, resulting in a return of $2865 - $2580 = $285.

Next, Abby plans to reinvest the total amount but now there is a $50 commission fee. So, the amount she actually invests is $2865 - $50 = $2815. To realize the same return as her first investment, she should add the return of $285 to her invested amount so the total amount she needs to receive next year would be $2815 + $285 = $3100.

Learn more about Stocks here:

https://brainly.com/question/14649952

#SPJ12

Which one of the government actions would most enhance efficiency in a free market, according to most economists? regulating profits to prevent extreme disparities in wealth placing limits on the amount that landlords can increase rent to protect renters identifying and helping industries that are the most important to the ruling party's policies protecting private property Per most economists, which of the possible government activities would not enhance the operation of a free market? defining property rights clearly creating an independent judiciary establishing a minimum wage to guarantee minimum incomes for unskilled workers issuing a patent for a water purifier that prevents anyone but the inventor from producing it

Answers

Final answer:

Protecting private property enhances efficiency in a free market by providing security for investments, whereas establishing a minimum wage might not enhance market operation as it can lead to unemployment and distort labor market signals.

Explanation:

Among the government actions that would most enhance efficiency in a free market, according to most economists, is protecting private property. This action provides a foundational element for market activities because it ensures that individuals can securely own and invest in assets, which in turn, solidifies the incentives to engage in economic activities. Conversely, of the options listed, establishing a minimum wage is the action that might not enhance the operation of a free market, as it can create a price floor above the equilibrium wage, potentially leading to a surplus of labor (unemployment), and distortion of market signals for labor.

Exercise 24-5 Bruno Corporation is involved in the business of injection molding of plastics. It is considering the purchase of a new computer-aided design and manufacturing machine for $436,900. The company believes that with this new machine it will improve productivity and increase quality, resulting in an increase in net annual cash flows of $103,273 for the next 6 years. Management requires a 10% rate of return on all new investments. (a) Calculate the internal rate of return on this new machine. Should the investment be accepted? (b) Calculate cash payback period, internal rate of return, and apply decision rules.

Answers

Answer:

The internal rate of return is 11%,  the investment will be accepted.  

Payback Period is 5

Explanation:

We use excel or a spreadsheet to calculate this ratio. See document attached.

We must use a cash flow to solve this problem.

At moment 0 we have the investment cost , in this case $436,900. From period 1 to period 6, we have incomes o benefits of $103,273. Then, we calculate the Net cash flow that is the difference between benefits and cost.

We use all the result (positive and negative) in Net cash flow to get the IRR.

The decision rules are 3:

Net Present Value (NPV)

Internal Rate of Return (IRR)

Payback Period

Suppose your company needs $13 million to build a new assembly line. Your target debt-equity ratio is .55. The flotation cost for new equity is 6 percent, but the flotation cost for debt is only 3 percent. Your boss has decided to fund the project by borrowing money because the flotation costs are lower and the needed funds are relatively small. a. What is your company’s weighted average flotation cost, assuming all equity is raised externally? (Do not round intermediate calculations and enter your answer as a percent rounded to 2 decimal places, e.g., 32.16.) b. What is the true cost of building the new assembly line after taking flotation costs into account? (Do not round intermediate calculations and enter your answer in dollars, not millions, rounded to the nearest whole dollar amount, e.g., 1,234,5667.)

Answers

Answer:True cost = [tex]\frac{cost of assembly}{1-weighted flotation cost }[/tex]

=  [tex]\frac{13,000,000}{1- 0.049}[/tex]

= $ 13,669,821.2

Explanation:

Given :

Debt-Equity ratio = 0.55

Flotation cost for new equity = 6%

Flotation cost for debt = 3 %

∴ To compute the weighted flotation cost , we'll use the following formula:

Weighted Flotation cost =[tex]\left [ \frac{1}{1+Debt-Equity ratio}\times Flotation cost of equity \right ] + \left [ \frac{Debt-Equity ratio}{1+Debt-Equity ratio}\times Flotation cost of debt \right ][/tex]

=  [tex]\left [ \frac{1}{1+0.55}\times 0.06 \right ] + \left [ \frac{0.55}{1+0.55}\times 0.03 \right ][/tex]

= 0.0387 + 0.0106

= 0.04934 or 4.93%

The true cost of building the new assembly line after taking flotation costs into account is evaluated using the following formula :

True cost = [tex]\frac{cost of assembly}{1-weighted flotation cost }[/tex]

=  [tex]\frac{13,000,000}{1- 0.049}[/tex]

= $ 13,669,821.2

A company has a beginning inventory of $ 60,000 and purchases during the year of $ 90,000. The beginning inventory consisted of 4,000 units and 9,000 units were purchased during the year. The company has 5,000 units left at yearminusend. Under averageminus​cost, what is Cost of Goods​ Sold? (Round any intermediary calculations to two decimal places and your final answer to the nearest​ dollar.)

Answers

Answer:

Cost of goods sold 103,860

Explanation:

beginning 4,000 units at $60,000

purchases 9,000 units at $90,000

Cost of goods available 13,000 units at $150,000

average cost 11.54 (rounded to two decimal places)

13,000 units of  goods for sale - 5,000 ending inventory = 9,000 units sold

cost of goods sold 9,000 x 11.54 = 103,860

Final answer:

The Cost of Goods Sold (COGS), under the average cost method, is calculated by finding the average cost per unit and multiplying by the number of units sold. In this case, the COGS is $80,000.

Explanation:

First, let's calculate the average cost per unit by adding the beginning inventory and purchases and dividing by the total number of units (the sum of the beginning inventory units and purchased units). In this case, ($60,000 + $90,000) / (4,000 + 9,000) = $10 / unit. Then, we multiply this average cost per unit by the number of units sold, which is the difference between the total number of units and the ending inventory. Hence, (13,000 units - 5,000 units) * $10 / unit gives us a Cost of Goods Sold (COGS) of $80,000.

Learn more about Cost of Goods Sold here:

https://brainly.com/question/33405095

#SPJ3

On December 31, 2018, Spearmint, Inc., issued $450,000 of 9 percent, 3-year bonds at a premium of $11,795. The bonds pay interest semiannually. Spearmint uses the straight-line bond amortization method. The entry to record each interest payment includes a debit to Bond Interest Expense for $18,284, a debit to Premium on Bonds Payable for $1,966, and a credit to Cash for $20,250. At June 30, 2019, the carrying value of the bonds will equal _____.

Answers

Answer:

a debit to Premium on Bonds Payable for $1,966, and a credit to Cash for $20,250.

Explanation:

450,000 bonds face vbalue

11,795 premium

450,000 x 0.09/2 = 20,250 cash procceds

11,795/ 6 = 1,965.83333 = 1,966 premium amortization

Bonita Industries has gathered the following information concerning one model of shoe: Variable manufacturing costs $28000 Variable selling and administrative costs $12000 Fixed manufacturing costs $160000 Fixed selling and administrative costs $120000 Investment $1600000 ROI 30% Planned production and sales 5000 pairs What is the markup percentage?

Answers

Answer:

Markup percentage = 150%

Explanation:

Markup = Selling Price - Cost

Total Cost = Variable + Fixed

Variable Costs = Manufacturing + Selling and Administrative

= $28,000 + $12,000 = $40,000

Fixed Costs = Manufacturing + Selling and Administrative

= $160,000 + $120,000 = $280,000

Total Cost = $40,000 + $280,000 = $320,000

Cost per unit = $320,000/ 5,000 = $64 per unit

Return on Investment = $1,600,000 X 30% = $480,000

Selling Value = Total Cost + Profit or Return = $320,000 + $480,000 = $800,000

Selling Price per unit = $800,000/5,000 = $160

Markup Percentage = [tex]\frac{Selling price - Cost per unit}{Cost per unit}  X 100[/tex]

= [tex]\frac{160-64}{64} X 100 = 150[/tex] percent

= 150%

Inventory Valuation under Absorption Costing During the most recent year, Judson Company had the following data associated with the product it makes: Units in beginning inventory 300 Units produced 15,000 Units sold ($300 per unit) 12,700 Variable costs per unit: Direct materials $20 Direct labor $60 Variable overhead $12 Fixed costs: Fixed overhead per unit produced $30 Fixed selling and administrative $140,000 How many units are in ending inventory?

Answers

Answer:

Value(ending inventory) = Units (ending inventory) × Cost per unit

= (2600 × 122)

= $ 317,200

Explanation:

Given :

Beginning inventory = 300

Units produced = 15,000

Units sold ($300 per unit) = 12,700

Variable costs per unit:

Direct materials = $20

Direct labor = $60

Variable overhead = $12

Fixed costs:

Fixed overhead per unit produced = $30

Fixed selling and administrative = $140,000

Units in ending inventory = Units in beginning inventory + Units produced - Units sold ($300 per unit)

= $300 + $15000 - $12700

= $2600

Cost per unit = Variable costs per unit  + Fixed costs

= (Direct material + Direct labor + Variable overhead) +  Fixed overhead per unit produced

= ($20 + $60 + $12) + $30

= $122

Value of ending inventory = Units in ending inventory  × Cost per unit

= (2600 × 122)

= $ 317,200

Adamson Company manufactures four lines of garden tools. As a result of an activity analysis, the accounting department has identified eight activity cost pools. Each of the product lines is produced in large batches, with the whole plant devoted to one product at a time. Classify each of the following activities or costs as either unit-level, batch-level, product-level, or facility-level. Activities (a) Machining parts. (b) Product design. (c) Plant maintenance. (d) Machine setup. (e) Assembling parts. (f) Purchasing raw materials. (g) Property taxes. (h) Painting.

Answers

Answer:

(a) unit level activity

(b) Product level activity

(c)Facility level activity

(d) Batch level activity

(e) unit level activity

(f) batch level activity

(g) facility level activity

(h) unit level activity

Explanation:

Unit level activity : It is that type of activity which is deals with only unit of product whether it is a selling unit, variable cost unit , direct material unit, direct labor unit or fixed cost unit.

Batch level activity: It is that type of activity which focuses on batches or bulk goods so that good discount to be provided due to which customers  are happy that results in increase in sales.

Product level activity: It is that type of activity which deals in a single product or we can say finished product which is ready to sale.

Facility level activity: It is that type of activity which aims in giving the facilities relating to the product or charges some taxes.

BY going through the meaning of each one of the activity level, we get to know that (a) unit level activity

(b) Product level activity

(c)Facility level activity

(d) Batch level activity

(e) unit level activity

(f) batch level activity

(g) facility level activity

(h) unit level activity

Activities or costs at Adamson Company are classified into unit-level, batch-level, product-level, or facility-level categories to manage expenses more effectively through activity-based costing.

We need to classify each of the activities or costs Adamson Company incurs into one of four levels: unit-level, batch-level, product-level, or facility-level. Here is how each activity could be categorized:

(a) Machining parts: Unit-level, as this is likely a cost that varies with the production of each individual unit.(b) Product design: Product-level, since the design is specific to each product line and doesn't change with every batch or unit.(c) Plant maintenance: Facility-level, because it's a cost necessary for keeping the plant operational, regardless of the number of units or batches produced.(d) Machine setup: Batch-level, since this occurs every time a new batch of products begins production.(e) Assembling parts: Unit-level, as it is an activity that happens for each individual unit.(f) Purchasing raw materials: This could be at the batch or product-level, depending on whether raw materials vary by batch or by product line.(g) Property taxes: Facility-level, these are costs associated with the facility and do not vary with production volume.(h) Painting: This could be seen as batch-level if multiple units are painted at a time, or unit-level if painting happens per unit produced. The exact categorization may depend on the details of the production process.

Activity-based costing groups expenses into various categories to better understand and manage the costs associated with different activities.

Other Questions
One of the strongest supporters of immediate abolition of slavery and who emphasized the corruptive nature of the institution on southern morality was: T.S. Arthur Catherine Beecher William Lloyd Garrison Abraham Lincoln Differentiate an orthophoto from map What is the capacitance of a parallel place capacitor with plates of area 1.0 cm2 that are separated by a distance of 0.1 mm? Assume that strontium titanate is the dielectric. The _________ function causes a program to terminate. During colonial times, which American political party opposed the English king and Parliament?the Toriesthe Whigsthe Anti-Federaliststhe Federalists Why did President Lincoln reject the Crittenden Compromise? What is the product x^2-16/2x+8*x^3-2x^2+x/x^2+3x-4 Which expression is equivalent to during 2016 most pedestrian fatalities occurred between the hours of what Express the answers to the following calculations in scientific notation, using the correct number of significant figures. (a) 145.75 + (2.3 101) 10 (b) 79,500 / (2.5 102) 10 (c) (7.0 103) (8.0 104) 10 (d) (1.0 104) (9.9 106) 10 how many positive integers are between 3/2 and 21/4 ?A : 2B : 3C : 4D : 5 A closed system contains propane at 35c. It produces 35 kW of work while absorbing 35 kW of heat. What is process? the temperature of the system after this process. Which of the following BEST describes a colony?OA) a territory that is settled and governed by another nationOB) a territory that is settled and governed by two conflicting nationsOC) a territory that is aided and protected by another nationOD) a territory that is supported by another nation until it can govern itself Which ion channels mediate the falling phase of an action potontial? What was an effect of the successful rebellion in Haiti? (APEX) I need answer for this Norm is interested in whether pet owners are more likely than those who do not own pets to have healthier lifestyles (e.g., exercise regularly, drink moderately, and refrain from nicotine use). By comparing the numbers he gathers on both groups, Norm will most likely be using what type of research method? Fracture most related to abuse is?a. Greenstickb. Compoundc. Comminutedd. Spiral A fireman clings to a vertical ladder and directs the nozzle of a hose horizontally toward a burning building. The rate of water flow is 6.31kg/s, and the nozzle speed is 12.5 m/s. The hose passes vertically between the firemans feet, which are 1.30 m below the nozzle. Choose the origin to be inside the hose between the firemans feet. What torque must the fireman exert on the hose? (This could also be stated, what is the rate of change of the angular momentum of the water?) An unknown material, with a mass of 54 gm, was submerged in water. The object occupied 14 gm of water. What is the density of the material?