Jogger A has a mass m and a speed v, jogger B has a mass m/3 and a speed 3v, jogger C has a mass 4m and a speed v/3, and jogger D has a mass 3m and a speed v/2. Rank the joggers in order of increasing kinetic energy. Indicate ties where appropriate.

Here, given that,

Horizontal velocity V_x = 4.5 x 10⁵ m /s

vertical electric field E_y = 9.6 x 10³ N/C

so, we get,

acceleration in vertical direction a_y = force on proton / mass

= 9.6 x 10³ x 1.6 x 10⁻¹⁹ / 1.67 x 10⁻²⁷

= 9.2 x 10¹¹ m /s²

a ) In horizontal direction it will move with uniform velocity

time required = distance / velocity

= 5 x 10⁻² / 4.5 x 10⁵

= 1.11 x 10⁻⁷ s

b ) vertical displacement in time 1.11 x 10⁻⁷ s

h = 1/2 x at² , initial vertical velocity is zero.

= .5 x 9.2 x 10¹¹ x ( 1.11 x 10⁻⁷ )²

= 5.66 x 10⁻³ m

=5.66 mm

c )Horizontal velocity will be unchanged ie 4.5 x 10⁵ m /s

vertical velocity will change due to acceleration

= u + at

0 + 9.2 x 10¹¹ x1.11 x 10⁻⁷

= 10.21 x 10⁴ m / s

= 1.021 x 10⁵ m /s

To learn more about electric field refer:

brainly.com/question/28027633

#SPJ12

The time interval required for the proton to travel 5.00 cm horizontally is 1.11 × 10^-7 s. The vertical displacement of the proton during this time interval can be calculated using the formula displacement = 0.5 * (qE/m) * (time^2). The horizontal component of the proton's velocity remains unchanged, while the vertical component changes due to the electric field force.

(a) To find the time interval required for the proton to travel 5.00 cm horizontally, we need to use the formula: time = distance/speed. In this case, the distance is 5.00 cm, which is 0.05 m, and the speed is 4.50 × 10^5 m/s. So, the time interval is 0.05 m / (4.50 × 10^5 m/s) = 1.11 × 10^-7 s.

(b) The vertical displacement of the proton during the time interval can be found using the formula: displacement = 0.5 * acceleration * time^2. Since the proton is not affected by gravity, the only force acting on it is the electric field force, which is given by: F = qE, where q is the charge of the proton and E is the electric field magnitude. The acceleration is equal to F/m, where m is the mass of the proton. The vertical displacement is then given by: displacement = 0.5 * (qE/m) * (time^2). Substituting q = +e (the charge of a proton) and m = mass of a proton, we can calculate the vertical displacement.
(c) After traveling 5.00 cm horizontally, the horizontal component of the proton's velocity remains unchanged since there are no forces acting on it in the horizontal direction. The vertical component of the velocity, on the other hand, changes due to the electric field force. To find the new vertical velocity, we can use the formula: final velocity = initial velocity + acceleration * time, where the acceleration is given by F/m and the time is the time interval we calculated in part (a).

Answer:

Velocity is 3.11 m/s at an angle of -56° with respect to the original line of motion.

Explanation:

Let line of action be horizontal axis , mass of ball be m and unknown velocity be v.

Here momentum is conserved.

Initial momentum =Final momentum

Initial momentum = m x 6i + m x 0i = 6m i

Final momentum = m x (5.21cos 29.7 i + 5.21sin 29.7 j) + m x v = 4.26 m i + 2.58 m j + m v

4.26 m i + 2.58 m j + m v = 6m i

v = 1.74 i - 2.58 j

Magnitude of velocity [tex]=\sqrt{1.74^2+(-2.58)^2}=3.11m/s[/tex]

Direction,

         [tex]\theta =tan^{-1}\left ( \frac{-2.58}{1.74}\right )=--56^0[/tex]

Velocity is 3.11 m/s at an angle of -56° with respect to the original line of motion.

Answer:

Part a)

charge through the battery is

[tex]Q = 9.72 \times 10^5 C[/tex]

Part b)

Maximum current is

i = 386 A

Explanation:

Part a)

As we know that the rating of battery is given as

[tex]R = 270 A h[/tex]

here we also know that the charge given by the battery is same as the capacity of the battery

so we will have

[tex]Q = i t[/tex]

[tex]Q = (270 A)(3600 s)[/tex]

[tex]Q = 9.72 \times 10^5 C[/tex]

Part b)

Now we know that current in the wire is given by

[tex]i = \frac{Q}{t}[/tex]

now plug in all values in it

[tex]i = \frac{9.72 \times 10^5}{42\times 60}[/tex]

[tex]i = 386 A[/tex]

Answer:

2440.24 J

Explanation:

Moment of inertia, I1 = 5 kg m^2

frequency, f1 = 3 rps

ω1 = 2 x π x f1 = 2 x π x 3 = 6 π rad/s

Moment of inertia, I2 = 2 kg m^2

Let the new frequency is f2.

ω2 = 2 x π x f2

here no external torque is applied, so the angular momentum remains constant.

I1 x ω1 = I2 x ω2

5 x 6 π = 2 x 2 x π x f2

f2 = 7.5 rps

ω2 = 2 x π x 7.5 = 15 π

Initial kinetic energy, K1 = 1/2 x I1 x ω1^2 = 0.5 x 5 x (6 π)² = 887.36 J

Final kinetic energy, K2 = 1/2 x I2 x ω2^2 = 0.5 x 3 x (15 π)² = 3327.6 J

Work done, W = Change in kinetic energy = 3327.6 - 887.36 = 2440.24 J

Answer:

4.39 x 10^-19 J

Explanation:

q1 = 1.6 x 10^-19 C

q2 = - 1.6 x 10^-19 C

r1 = 3 x 10^-10 m

r2 = 7 x 10^-10 m

The formula for the potential energy is given by

U1 = k q1 q2 / r1 = - (9 x 10^9 x 1.6 x 10^-19 x 1.6 x 10^-19) / (3 x 10^-10)

U1 = - 7.68 x 10^-19 J

U2 = k q1 q2 / r2 = - (9 x 10^9 x 1.6 x 10^-19 x 1.6 x 10^-19) / (7 x 10^-10)

U2 = - 3.29 x 10^-19 J

Change in potential energy is

U2 - U1 = - 3.29 x 10^-19 + 7.68 x 10^-19 = 4.39 x 10^-19 J

Final answer:

The change in electric potential energy is calculated using the formula ΔU = kq1q2/r, with the distances and charges plugged into the formula, resulting in a negative value, indicating a decrease in potential energy.

Explanation:

The change in electric potential energy when moving an electron from 3 × 10-10 m to 7 × 10-10 m from a proton can be calculated using the formula for the potential energy between two charges: ΔU = kq1q2/r. Plugging in the constants and distances, we have ΔU = k(-e)(+e)(1/7 × 10-10 - 1/3 × 10-10) where k is the Coulomb's constant (8.987 × 109 Nm2/C2) and e is the elementary charge (1.602 × 10-19 C).

The result, calculated in joules, will be negative, signifying that the electron is moving to a region of lower potential energy as it moves away from the proton.

Answer:

0.7

Explanation:

f = 50 hz, R = 40 ohm, L = 0.3 h, C = 60 uC = 60 x 10^-6 c

XL = 2 x 3.14 x f x L = 2 x 3.14 x 50 x 0.3 = 94.2 ohm

Xc = 1 / ( 2 x 3.14 x 50 x 60 x 10^-6) = 53.078 ohm

Impedance is Z.

Z^2 = R^2 + ( XL - Xc)^2

Z^2 = 40^2 + (94.2 - 53.078)^2

Z^2 = 1600 + 1691.019

Z = 57.37 ohm

The power factor is given by

CosФ = r / Z = 40 / 57.37 = 0.697 = 0.7

The power factor of a circuit is the ratio of real power to apparent power and is calculated by the cosine of the phase angle between voltage and current. With the information given, we cannot calculate the power factor of the RLC series circuit because the rms voltage of the source is required but not provided.

The power factor of a circuit represents the cosine of the phase angle between the voltage and the current in an AC circuit. In an RLC circuit, like the one described, the power factor can be calculated by dividing the real power (measured in watts) by the apparent power (volt-amps). To find the power factor, we need to first calculate the impedance (Z) of the circuit using the formula Z = √(R² + (XL - XC)²), where XL is the inductive reactance and XC is the capacitive reactance.

Inductive reactance (XL) is given by XL = 2πfL, and capacitive reactance (XC) by XC = 1/(2πfC). Since we know that f = 50 Hz, L = 0.30 H,  and C = 60 μF, we can calculate XL and XC. Substituting R for the resistance in the circuit, we can find the impedance. After finding the impedance, we can calculate the real power (P) using P = I²R, where I is the rms current.

From the real power and the apparent power, which is IZ, we can find the power factor by calculating P/(IZ). However, we need the actual values of all elements, including the voltage, to complete these calculations. With the information provided in the question, we can't calculate the power factor because the rms voltage of the source isn't given.

Explanation:

It is given that,

Mass of the bullet, m₁ = 0.093 kg

Initial speed of bullet, u₁ = 100 m/s

Mass of block, m₂ = 2.5 kg

Initial speed of block, u₂ = 0

We need to find the speed of the block after the bullet embeds itself in the block. Let it is given by V. On applying the conservation of linear momentum as :

[tex]m_1u_1+m_2u_2=(m_1+m_2)V[/tex]

[tex]V=\dfrac{m_1u_1+m_2u_2}{(m_1+m_2)}[/tex]

[tex]V=\dfrac{0.093\ kg\times 100\ m/s+0}{(0.093\ kg+2.5\ kg)}[/tex]

V = 3.58 m/s

So, the speed of the bullet is 3.58 m/s. Hence, this is the required solution.

To find the total mass of chloroform in the second sample, the mass of carbon is scaled proportionally to find the corresponding masses of hydrogen and chlorine. By summing these, the total mass of chloroform is calculated to be 298.525 grams.

To determine the total mass of chloroform in the second sample, we must first understand that chloroform has a known molecular formula of CHCl3. Given that the first sample contains 12.0 g of carbon, 106.4 g of chlorine, and 1.01 g of hydrogen, we can deduce the mass ratios of the elements within chloroform. Using the molecular mass of chloroform, which is 119.37 g/mol, we can calculate the masses of hydrogen and chlorine in the second sample based on the given mass of carbon.

For the second sample: If 12.0 g of carbon is accompanied by 1.01 g of hydrogen and 106.4 g of chlorine, then 30.0 g of carbon should be accompanied by:

Thus, the total mass of chloroform in the second sample would be the sum of the masses of carbon, hydrogen, and chlorine: 30.0 g C + 2.525 g H + 266.0 g Cl = 298.525 g of chloroform.

Answer:

248

Explanation:

L = Inductance of the slinky = 130 μH = 130 x 10⁻⁶ H

[tex]l[/tex] = length of the slinky = 3 m

N = number of turns in the slinky

r = radius of slinky = 4 cm = 0.04 m

Area of slinky is given as

A = πr²

A = (3.14) (0.04)²

A = 0.005024 m²

Inductance is given as

[tex]L = \frac{\mu _{o}N^{2}A}{l}[/tex]

[tex]130\times 10^{-6} = \frac{(12.56\times 10^{-7})N^{2}(0.005024)}{3}[/tex]

N = 248

Answer:

Centripetal acceleration of the car is 17.4 m/s²

Explanation:

It is given that,

Radius of the track, r = 57 m

Speed of car, v = 31.5 m/s

We need to find the centripetal acceleration of the race car. The formula for the centripetal acceleration is given by :

[tex]a=\dfrac{v^2}{r}[/tex]

[tex]a=\dfrac{(31.5\ m/s)^2}{57\ m}[/tex]

[tex]a=17.4\ m/s^2[/tex]

So, the centripetal acceleration of the race car is 17.4 m/s². Hence, this is the required solution.

Answer: Cells require a constant input of energy to maintain their high level of organization.

Explanation:

According to the second principle of thermodynamics:

"The amount of entropy in the universe tends to increase over time ".

That is, in any cyclic process, entropy will increase, or remain the same.

So, in this context, entropy is a thermodynamic quantity defined as a criterion to predict the evolution or transformation of thermodynamic systems. In addition, it is used to measure the degree of organization of a system.  

In other words: Entropy is the measure of the disorder of a system and is a function of state.

Now, in the specific case of cells, in order to maintain their high level of organization, which goes against the natural tendency to disorder, a constant input of energy is necessary to maintain that level.

The Second Law of Thermodynamics explains how energy transfers result in some energy being lost in unusable forms, such as heat energy.

The Second Law of Thermodynamics states that in every energy transfer, some amount of energy is lost in a form that is unusable, often in the form of heat energy. This principle explains why energy transfers are never completely efficient, leading to increased disorder or entropy in the universe.

Answer:

option (c) - 10 j

Explanation:

F = (6 i + 4 j - 2 k) N

r1 = (1.5, 3, -4.5) m = (1.5 i + 3j - 4.5 k) m

r2 = (4, -2.5, - 3) m = (4 i - 2.5 j - 3 k) m

displacement, r = r2 - r1 = ( 2.5 i - 5.5 j + 1.5 k) m

Work done is defined as the dot product of force vector and teh displacement vector.

[tex]W = \overrightarrow{F}.\overrightarrow{r}[/tex]

W = (6 i + 4 j - 2 k) . ( 2.5 i - 5.5 j + 1.5 k)

W = 15 - 22 - 3 = - 10 J

Answer:

Option C is the correct answer.

Explanation:

Heat required to melt solid in to liquid is calculated using the formula

            H = mL, where m is the mass and L is the latent heat of fusion.

Latent heat of fusion for water = 333.55 J/g

Mass of ice = 0.3 kg = 300 g

Heat required to convert 0.3 kilogram of ice at 0°C to water at the same temperature

          H = mL = 300 x 333.55 = 100,375 J

Option C is the correct answer.

Answer:

0.14 J

Explanation:

Use the force to calculate the spring constant.

F = k Δx

27 N = k (0.32 m − 0.28 m)

k = 675 N/m

Work is the change in energy:

W = PE

W = ½ k (Δx)²

W = ½ (675 N/m) (0.30 m − 0.28 m)²

W = 0.135 Nm

W = 0.135 J

Rounding to two decimal places, W = 0.14 J.

Your answer was correct, but it was in units of Ncm, and you needed to answer in units of J.

The work done to stretch the spring from 28 cm to 30 cm is 39.00 Joules, computed using the principles of Hooke's Law and the concept of work done.

In this problem, we are dealing with the concept of work done on a spring, which falls under Physics principles. Hooke's Law states that the force to compress or extend a spring by a distance x from its natural length is proportional to x. It can be written as F = kx, where F is the force, k is the spring constant, and x is the distance.

In this case, the force (F) is 27 N, and the length of stretch (x) is 32 cm - 28 cm = 4 cm. We can find the spring constant (k) using the formula k = F / x = 27 N / 4 cm = 6.75 N/cm.

The work done (W) to stretch the spring from 28 cm to 30 cm is the area under the force/displacement graph from '28 cm' to '30 cm'. Since the force is linear with displacement for a spring, this area can be found using the formula for the area of a trapezoid: W = ½ (F1 + F2) x d. F1 is the initial force (k*28 cm), F2 is the final force (k*30 cm), and d is the displacement (30 cm - 28 cm). Substituting the values, W = ½ [(6.75 N/cm*28 cm)+(6.75 N/cm*30 cm)]*(2 cm) = 39.00 J.

https://brainly.com/question/35917320

#SPJ2

Final answer:

The half-life of radon-222 is 3.82 days.

It take approximately 9.34 days for the sample to decay to 15% of its original amount.

Explanation:

To answer the student's question regarding the half-life of radon-222, we turn to the information provided which states that radon-222 (Rn-222) has a half-life of 3.823 days. Considering this data:

(a) The half-life of radon-222 is 3.82 days.

(b) To determine how long it will take for the sample to decay to 15% of its original amount, we can utilize the radioactive decay formula:

N(t)=N_0(1/2)^(t/T)

Where:

N(t) = remaining quantity after time t

N_0 = initial quantity

T = half-life of the substance

t = time elapsed

For radon-222, substituting N(t)/N_0 = 0.15 and T = 3.823 days into the formula and solving for t, we can generate an accurate answer. The calculation would reveal that it takes approximately 9.34 days for the sample to decay to 15% of its original amount.

Answer:

F0 / 81

Explanation:

Let the two charges by Q and q which are separated by d.

By use of coulomb's law

F0 = k Q q / d^2      ......(1)

Now the charges are decreased by factor of 9.

Q' = Q / 9

q' = q / 9                 ......(2)

Now the Force is

F' = k Q' q' / d^2

F' = k (Q /9) (q / 9) / d^2

F' = k Q q / 81d^2

F' = F0 / 81      

Answer:

Doubled

Explanation:

F = 1.8 x 10^-6 N, q1 = q2

The force between the two charges is directly proportional to the product of two charges and inversely proportional to the square of distance between them.

Now one of the charge is doubled but the distance remains same so the force between the two charges becomes doubled.

Answer:

8.5 kg

Explanation:

Angular momentum is conserved.

I₁ ω₁ = I₂ ω₂

I ω₀ = (I + mr²) ω

(49 kg m²) (40 rpm) = (49 kg m² + m (1.2 m)²) (32 rpm)

61.25 kg m² = 49 kg m² + (1.44 m²) m

m = 8.5 kg

The mass of the clay is 8.5 kg.

Answer:

[tex]1.0672\times 10^{-9}N[/tex]

Explanation:

[tex]G[/tex] = Gravitational constant = 6.67 x 10⁻¹¹

[tex]F[/tex]  = Gravitational force between these spheres

[tex]m_{1}[/tex] = mass of first sphere = 1.60 kg

[tex]m_{2}[/tex]  = mass of second sphere = 16 g = 0.016 kg

[tex]r[/tex]  = distance between the centers of the sphere = 4 cm = 0.04 m

Gravitational force between these spheres is given as

[tex]F = \frac{Gm_{1}m_{2}}{r^{2}}[/tex]

[tex]F = \frac{(6.67\times 10^{-11})(1.60)(0.016)}{0.04^{2}}[/tex]

[tex]F = 1.0672\times 10^{-9}N[/tex]

Answer:

32 C > 32 F > 32 K

Explanation:

32 F, 32 C, 32 K

Let T1 = 32 F

T2 = 32 C

T3 = 32 K

Convert all the temperatures in degree C

The relation between F and C is given by

(F - 32) / 9 = C / 100

so, (32 - 32) / 9 = C / 100

C = 0

So, T1 = 32 F = 0 C

The relation between c and K is given by

C = K - 273 = 32 - 273 = - 241

So, T3 = 32 K = - 241 C

So, T 1 = 0 C, T2 = 32 c, T3 = - 241 C

Thus, T2 > T1 > T3

32C > 32 F > 32 K

Answer:

ur mom

hsheu7shrbrjxbfbbrndnifidfjf

The distance at which the puck of mass 0.13 kg, traveling across the ice at speed 17.4 m/sec will stop is 131.2 meters.

Given to us

Mass of the puck, m = 0.13kg

The velocity of the ice, u = 17.4 m/sec

Friction force, f = 0.15 N

We know we want to stop the puck, therefore, the final velocity of the puck will be 0.

v = 0

We know that according to the first law of motion,

Force = mass x acceleration

F = m x a

Substitute the value,

[tex]0.15 = 0.13 \times a[/tex]

[tex]a = 1.1538\rm\ m/s^2[/tex]

As we know that the final velocity of the puck will be 0, therefore, there will be a deceleration in the puck.

a = -1.1538 m/s².

Thus, the acceleration of the ice puck is -1.1538 m/s².

We know that according to the third equation of the motion,

[tex]v^2-u^2 = 2as[/tex]

substitute the values,

[tex]0^2-(17.4)^2 = 2(-1.1538)s[/tex]

s = 131.2012 = 131.2 meters

Hence, the distance at which the puck of mass 0.13 kg, traveling across the ice at speed 17.4 m/sec will stop is 131.2 meters.

Learn more about Equation of Motion:

https://brainly.com/question/5955789

Final answer:

The stopping distance of a hockey puck  is 131.1 m after rounding to the nearest tenth of a meter.

Explanation:

To calculate the stopping distance of a hockey puck, we first need to determine the deceleration caused by the frictional force.

The formula for deceleration due to friction is a = f/m, where a is the acceleration (deceleration, in this case, as it's negative), f is the frictional force, and m is the mass of the puck. Given that the frictional force f is 0.15 N and the mass m of the puck is 0.13 kg, we can calculate the deceleration as follows:

a = f/m = 0.15 N / 0.13 kg ≈ 1.15 m/s2

Now, to find the stopping distance we can use the formula d = v2 / (2×a), where d is the stopping distance, v is the initial speed, and a is the deceleration. Plugging in the initial speed v = 17.4 m/s and the deceleration a = 1.15 m/s2, we get:

d = (17.4 m/s)2 / (2 × 1.15 m/s2) ≈ 131.06 m

To round to the nearest 0.1 m, the stopping distance of the puck is 131.1 m.

Answer:

Explanation:

The efficiency of a refrigerator is defined in the terms of coefficient of performance (COP).

The ratio of amount of heat in cold reservoir to the work done is termed as the COP.

COP = QL / W

COP = T2 / (T1 - T2)

Where, T1 be the temperature of hot reservoir, T2 be the temperature of cold reservoir.

Answer:

i think 7

Explanation:

Answer:

a) 0.124 m

b) 0.93 ms⁻¹

c) 0.5 k A² cos ² ( ωt )  

Explanation:

1) Potential energy = U = 0.5 k A² , where A is the amplitude and k = 850 N/m is the spring constant.

0.5 ( 850) (A² ) = 6.5

⇒ A = 0.124 m = Amplitude.

b) From energy conservation,  0.5 m v² =  6.5

⇒ speed = v = 0.93 ms⁻¹

c) If x = A cos ωt ,

Potential energy = 0.5 k A² = 0.5 k A² cos ² ( ωt )  

Answer:

Explanation:

The change in temperature may be calculated from the formula:

Where:

Then, you can make these assumptions or inferences from the conditions stated in the problem:

Then, you can state that, for those samples, ΔT = k / C, i.e. the increase in temperature is inversely related to the specific heat.

That means that the higher the specific heat the lower ΔT, and the lower the specific heat the higher ΔT.

The ranking in decrasing order of specific heat is:

Ranking in increasing order of ΔT:

And since all of them started at the same temperature, that is the ranking in resulting temperature from lowest to highest:

That means that the sample of water, the matter with the highest specific heat capacity (4.19 J/g°C), will reach the lowest temperature, and the sample of iron, the matter with the lowest heat capacity (0.46 J/g°C) will reach the highest temperature.

Answer:

The speed of the water shoot out of the hole is 20 m/s.

(d) is correct option.

Explanation:

Given that,

Height = 20 m

We need to calculate the velocity

Using formula Bernoulli equation

[tex]\dfrac{1}{2}\rho v_{1}^2+\rho gh_{1}=\dfrac{1}{2}\rho v_{2}^2+\rho gh_{2}[/tex]

Where,

v₁= initial velocity

v₂=final velocity

h₁=total height

h₂=height of the hole from the base

Put the value into the formula

[tex]v_{1}^2=2g(h_{2}-h_{1})[/tex]

[tex]v_{1}=\sqrt{2g(h_{2}-h_{1})}[/tex]

[tex]v_{1}=\sqrt{2\times9.8\times(20-0.005)}[/tex]

[tex]v_{1}=19.7\ m/s= approximate\ 20\ m/s[/tex]

Hence, The speed of the water shoot out of the hole is 20 m/s.

Answer:

Magnetic field = 1.41 T

Explanation:

Magnetic field of solenoid, B = μnI

μ = 4π x 10⁻⁷N/A²

Number of turns per meter, [tex]n=\frac{N}{L}=\frac{5601}{9.1\times 10^{-2}}=6.15\times 10^4turns/m[/tex]

Current, i = 18.2 A

B = μnI = 4π x 10⁻⁷ x 6.15 x 10⁴ x 18.2 = 1.41 T

Magnetic field = 1.41 T

Answer:

1.4719 m per sec

Explanation:

Hello

Kinetic energy is the energy associated with the movement of objects. Although there are many forms of kinetic energy  

the formula to use is

[tex]E=\frac{mv^{2} }{2}[/tex]

where m is the mass of the object and v the velocity

lets see the kinetic energy of the sprinter running

[tex]E=\frac{65 Kg*10(\frac{m}{s} ^)){2} }{2} \\\\E=\frac{65 *100 }{2} \\E=3250 Joules\\\\[/tex]

Now, the elephant must have the same kinetic energy

[tex]E=\frac{m*v_{2} ^{2} }{2} \\\\E*2=m*v_{2} ^{2}\\ \frac{2E}{m} =v_{2} ^{2} \\\sqrt{\frac{2E}{m} } =v_{2}  \\\\\\v_{2} =\sqrt{\frac{2*3250}{3000} }\\ \\v_{2} =1.4719 \frac{m}{s} \\\\[/tex]

it works only the positive root, so the elephant must to  walk  to 1.4719 m/s to have the same kinetic energy.

Have a great day

A 3000-kg elephant needs to move at a speed of approximately 1.183 m/s to have the same kinetic energy as a 65.0-kg sprinter running at 10.0 m/s.

The subject of the question falls into the category of physics, specifically dealing with the concept of kinetic energy and motion. Kinetic energy is given by the equation KE = 1/2 m v², where m is the mass and v is the velocity of the object. In this case, we want the elephant and the sprinter to have the same kinetic energy.

To find the velocity at which the elephant must move, we set the kinetic energy of the elephant (1/2 * 3000 kg * v²) equal to the kinetic energy of the sprinter (1/2 * 65.0 kg * (10.0 m/s)²) and solve for v (velocity of the elephant).

This gives us v = sqrt((1/2 * 65 kg * (10 m/s)²) / (1/2 * 3000 kg)) = 1.183 m/s. Therefore, a 3000-kg elephant must move at a speed of approximately 1.183 m/s to have the same kinetic energy as a 65.0-kg sprinter running at 10.0 m/s.

https://brainly.com/question/26472013

#SPJ11

Answer:

The average normal stress is 5 ksi.

Explanation:

Given that,

Diameter = 2 inch

Load = 15.71 kip

We need to calculate the average normal stress

Using formula of stress

Average normal stress [tex]\sigma =\dfrac{F}{A}[/tex]

Where, F = load

A = area

Put the value into the formula

[tex]\sigma=\dfrac{15.71}{\pi\times(\dfrac{2}{2})^2}[/tex]

[tex]\sigma = 5\ kip/inc^2[/tex]

[tex]\sigma=5\ ksi[/tex]

Hence, The average normal stress is 5 ksi.