Julius competes in the hammer throw event. The hammer has a mass of 7.26 kg and is 1.215 m long. What is the centripetal force on the hammer when it has a tangential speed of 31.95 m/s? The answer is rounded off to the nearest whole number. 190 N 840 N 1,400 N 6,100 N

Answer:

F = v / w

Air: 343m/s  /  2.0 m = 171.5/s

Helium: 1007m/s / 2.0 m = 503.5/s

Carbon Dioxide: 267m/s  /  2.0 m = 133.5 /s

Explanation:

The final volume needed for the pressure of the nitrogen gas to be 1.53 atm at a temperature of 337 K is approximately 190.8 ml. This is calculated using the combined gas law.

To find out what the final volume of nitrogen gas in the cylinder would be when the pressure is 1.53 atm and the temperature is 337 K, we can use the combined gas law, which is derived from the ideal gas law. The combined gas law states that the ratio of the product of pressure and volume to temperature remains constant for a fixed amount of gas when the temperature is measured in Kelvin. The formula for the combined gas law is (P1 * V1) / T1 = (P2 * V2) / T2, where P is pressure, V is volume, and T is temperature.

Given that:

We want to find the final volume (V2), so rearranging the equation to solve for V2 gives us:

V2 = (P1 * V1 * T2) / (P2 * T1)

Substituting the known values:

V2 = (1.23 atm * 219 ml * 337 K) / (1.53 atm * 295 K)

By performing the calculations:

V2 ≈ 190.8 ml

Therefore, the final volume needed for the pressure of the nitrogen gas to be 1.53 atm at 337 K is approximately 190.8 ml.

To determine the total force exerted on the diver, multiply the pressure (in pascals) by the surface area. The total force is 303,000 newtons.

To calculate the total force exerted by the water on a diver who is 10.0 meters underwater, we need to apply the concept of pressure which is defined as force per unit area. Given the pressure experienced by the diver is 202 kPa and the diver's surface area is 1.50 meters squared, we can use the formula Force = Pressure × Area.

First, we need to convert the pressure from kilopascals to pascals since one kilopascal equals 1,000 pascals:

202 kPa × 1,000 = 202,000 Pa

Then, we multiply the pressure by the diver's surface area to find the total force:

Total Force = 202,000 Pa × 1.50 m² = 303,000 N

Therefore, the water pushes on the diver with a total force of 303,000 newtons.

The average current supplied to the house in one hour can be found by dividing the energy supplied by the voltage. In this case, the average current is 5 Amperes.

To find the average current supplied to the house, we can use the equation: I = Q / t, where I is the current, Q is the charge, and t is the time. In this case, the energy supplied is 18,000,000 J, so we can find the charge using the equation: Q = E / V, where E is the energy and V is the voltage. Given that the time is 1 hour, we can calculate the average current using the equation: I = Q / t.

First, we need to convert the energy from joules to kilowatt-hours: 1 kWh = 3,600,000 J. So, the energy supplied to the house is 5 kWh.

The average current can now be calculated as follows: I = E / V = 5 kWh / 1 hour = 5 A. Therefore, the average current supplied to the house in that hour is 5 Amperes.

https://brainly.com/question/2264542

#SPJ2

The distance between the charge and the source of the electric field is 2.2 m.

The potential energy U of a charge q placed in an electric field created by a source charge Q, at a distance r from the source charge is given by,

[tex] U=\frac{kQq}{r} [/tex] ...... (1)

Here, k is the Coulomb constant.

The electric field E at a distance r from the source charge is given by,

[tex] E =\frac{kQ}{r^2} [/tex] ......(2)

From equations (1) and (2)

[tex] U=E*q*r [/tex]

Rewrite the expression for ri.

[tex] r=\frac{U}{Eq} [/tex]

Substitute 75 J for U, [tex] 4.5*10^5 V/m [/tex] for E and [tex] 7.5*10^{-5} C [/tex] for q.

[tex] r=\frac{U}{Eq} \\ =\frac{75 J}{(4.8*10^{5} V/m)(7.2*10^{-5}C)} \\ =2.17 m [/tex]

Rounding off to the nearest tenth, the the distance between the charge and the source charge is 2.2 m

Whale songs in an ocean in sound waves frequencies between 30 Hertz (Hz) and around 8,000 Hz (8 kHZ).

The sound is described in physics as: a pressure wave of vibration that travels through a gas, liquid, or solid medium and is audible.

Moans, groans, grunts, blasts, and shrieks are made by humpback whales. Sound waves make up each section of their song. These sound waves include some high frequency ones. These noises would resemble tall, sharp mountains if you could see them. Low frequency sound waves are also emitted by whales. These waves resemble far-flung hills in their spacing. Without losing energy, these sound waves can travel a great distance through water. Various of these low frequency sounds, according to researchers, can travel more than 10,000 miles in some ocean depths.

Hertz units are used to measure sound frequency. Whales use frequencies between 30 Hertz (Hz) and around 8,000 Hz (8 kHZ). The whales' songs are only partially audible to humans.

Learn more about sound here:

https://brainly.com/question/14595927

#SPJ2

Final answer:

Whale songs in the ocean are sound waves, specifically low-frequency aural signals that can travel vast distances underwater, facilitated by the SOFAR channel. Unfortunately, noise pollution seriously impacts these marine communications.

Explanation:

The whale songs that are transmitted in the ocean are a form of sound waves. These low-frequency sound waves are capable of traveling long distances underwater, allowing whales to communicate over hundreds of kilometers. This is possible due to the unique properties of water, especially in a layer known as the SOFAR channel, where sound speed is the slowest and allows for minimal attenuation of these aural signals.

However, contemporary issues such as noise pollution from ships pose a threat to this natural communication system, substantially reducing the ability of cetaceans to transmit their songs over long distances.

In a circuit, a voltage drop occurs over a resistor as the electric current flows through it, transforming electrical energy into heat due to resistance, not storing charge or electrical energy. the correct answer is voltage is dropped.

Among the choices provided for what occurs over a resistor in a circuit, the correct answer is voltage is dropped. When electric current flows through a resistor, it encounters resistance which impedes the flow of charge. This results in a voltage drop across the resistor. The energy that the charges lose as they pass through the resistor is dissipated mainly in the form of heat. This concept is reflected in the equation for electric power dissipation, P = IV, where P represents power, I is current, and V is voltage. This can also be expressed as P = I²R or P = V²/R using Ohm's law, where R is the resistance. Contrary to some of the other choices, resistors do not store charge or electrical energy; that function is typically carried out by capacitors in a circuit.

Solution: (i) Density (ii) thermal

Liquids at lower temperatures have greater density when compared to liquids at higher temperatures.This is because, at higher temperatures, molecules have greater kinetic energy and hence they are spaced farther apart, when compared to molecules at lower temperatures. Thus, the colder layers of liquids are heavier than the warmer layers, which causes then to move down due to gravity. For the same reason, the hotter layers move upwards through the liquid.

When a liquid is heated, the molecules closest to the heat source have greater energy, their density becomes less and they move upwards. The colder layers sink downwards. The layers of the liquid which were cold initially, get heated and they travel upwards. As the process repeats, convection currents are set up in the liquid.

These currents transfer the thermal energy derived from the source throughout the liquid. The process stops when the entire liquid is at the same temperature.

Thus, convection currents occur in liquids due to temperature and density differences. Convection currents transfer thermal energy throughout a fluid.

Convection currents occur in fluids because of temperature and density differences. Convection currents transfer thermal energy throughout a fluid. They continue until all of the fluid is at the same temperature.

As we know about the relationship between kinetic energy and density. Density is inversely proportional to the temperature while the temperature is directly proportional to kinetic energy showing that kinetic energy is inversely proportional to density.

This is because, at higher temperatures, molecules have greater kinetic energy and the colder layer has less density than the hotter layer due to the density difference under the influence of density the colder layer moves downward resulting in the setup of convective heat transfer.

Due to the movement of molecules and its process repetition and temperature difference convective current transfer takes place and it will continue until the equilibrium process is not achieved.

Hence it shows the relationship between temperature and density. density is inversely proportional to the temperature.

To learn more about convective heat transfer refer to the link

https://brainly.com/question/276731

OSHA was established to ensure the safety and health of workers in their workplaces. It enforces standards, conducts inspections, and provides resources. Its implementation has significantly improved the health and safety conditions in American workplaces.

The Occupational Safety and Health Administration (OSHA) was established as a necessary agency to ensure the health and safety of workers within their work environments. Prior to OSHA's creation, workplaces suffered from numerous safety issues, including hazardous materials, dangerous machinery, and poor working conditions that could lead to injury or even death. Therefore, the U.S. government saw the need to establish a set of standards for businesses to follow in order to prioritize their employees' safety and wellbeing.

OSHA was necessary because it took responsibility for enforcing these standards, conducting inspections to ensure compliance, and providing training and resources for both employers and workers. Without OSHA, workplaces could be highly dangerous and there might be no legal basis for holding employers accountable for harm caused to their employees in the workplace. The implementation of OSHA helped reduce workplace accidents, injuries and illnesses, significantly improving the health and safety conditions in American workplaces.

https://brainly.com/question/33173694

#SPJ6

The minimum amount of energy required to move the satellite from its orbit to a location very far away from Earth is approximately [tex]\( 6.245 \times 10^{11} \, \text{J} \)[/tex]

To move a satellite from a stable orbit around the Earth to a location very far away, such as into deep space, we need to provide enough energy to overcome the gravitational pull of the Earth and to accelerate the satellite to a speed sufficient to escape Earth's gravitational field entirely. This energy required to escape Earth's gravitational field is called the escape velocity.

The escape velocity, [tex]\( v_{\text{escape}} \)[/tex], is given by the formula:

[tex]\[ v_{\text{escape}} = \sqrt{\frac{2GM}{R}} \][/tex]

Where:

- [tex]\( G \)[/tex] is the gravitational constant [tex](\( 6.67430 \times 10^{-11} \, \text{m}^3/\text{kg/s}^2 \))[/tex],

- [tex]\( M \)[/tex] is the mass of the Earth [tex](\( 5.972 \times 10^{24} \, \text{kg} \))[/tex],

- [tex]\( R \)[/tex] is the distance from the center of the Earth to the satellite's initial orbit.

The minimum amount of energy required to move the satellite from its orbit to a location very far away would be the kinetic energy required to achieve this escape velocity.

The kinetic energy [tex]\( KE \)[/tex] required to achieve a velocity [tex]\( v \)[/tex] for an object of mass [tex]\( m \)[/tex] is given by the formula:

[tex]\[ KE = \frac{1}{2} m v^2 \][/tex]

Therefore, to calculate the minimum energy required, we need to find the escape velocity and then calculate the kinetic energy corresponding to that velocity.

Keep in mind that in real-world scenarios, additional energy may be required to maneuver the satellite and account for factors such as atmospheric drag and gravitational influences from other celestial bodies. However, for the sake of simplicity, we will focus on the minimum energy required to achieve escape velocity from Earth's gravity.

Let's proceed with the calculations using the known values for [tex]\( G \)[/tex], [tex]\( M \)[/tex], and [tex]\( R \)[/tex].

Let's calculate the escape velocity [tex]\( v_{\text{escape}} \)[/tex] first:

Given:

- [tex]\( G = 6.67430 \times 10^{-11} \, \text{m}^3/\text{kg/s}^2 \)[/tex],

- [tex]\( M = 5.972 \times 10^{24} \, \text{kg} \)[/tex],

- [tex]\( R \)[/tex] (distance from the center of the Earth to the satellite's initial orbit).

Assuming the satellite is in a low Earth orbit, where [tex]\( R \)[/tex] is approximately the radius of the Earth, [tex]\( R \approx 6.371 \times 10^6 \, \text{m} \)[/tex].

Let's calculate [tex]\( v_{\text{escape}} \)[/tex]:

[tex]\[ v_{\text{escape}} = \sqrt{\frac{2 \times 6.67430 \times 10^{-11} \times 5.972 \times 10^{24}}{6.371 \times 10^6}} \][/tex]

[tex]\[ v_{\text{escape}} = \sqrt{\frac{2 \times 6.67430 \times 5.972}{6.371}} \times 10^{11} \][/tex]

[tex]\[ v_{\text{escape}} = \sqrt{\frac{2 \times 39.83416}{6.371}} \times 10^{11} \][/tex]

[tex]\[ v_{\text{escape}} = \sqrt{\frac{79.66832}{6.371}} \times 10^{11} \][/tex]

[tex]\[ v_{\text{escape}} \approx \sqrt{12.513} \times 10^{11} \][/tex]

[tex]\[ v_{\text{escape}} \approx 3.537 \times 10^4 \, \text{m/s} \][/tex]

Now, we'll calculate the kinetic energy [tex]\( KE \)[/tex] required to achieve this velocity using the formula:

[tex]\[ KE = \frac{1}{2} m v_{\text{escape}}^2 \][/tex]

Given that the mass m, of the satellite is not specified, we'll assume a typical satellite mass of [tex]\( 1000 \, \text{kg} \)[/tex] for illustrative purposes.

[tex]\[ KE = \frac{1}{2} \times 1000 \times (3.537 \times 10^4)^2 \][/tex]

[tex]\[ KE = \frac{1}{2} \times 1000 \times 1.249 \times 10^9 \][/tex]

[tex]\[ KE \approx 6.245 \times 10^{11} \, \text{J} \][/tex]

So, the minimum amount of energy required to move the satellite from its orbit to a location very far away from Earth is approximately [tex]\( 6.245 \times 10^{11} \, \text{J} \)[/tex].

The minimum amount of energy required to move the satellite very far away from earth is approximately 3.124 x 10¹³ Joules.

To find the minimum amount of energy required to move a satellite from its orbit to a location very far away from Earth (essentially to infinity), we need to calculate the difference in gravitational potential energy between its current orbit and a point infinitely far away.

The satellite has a mass m, the Earth has a mass M, and the radius of the Earth is R. The distance of the satellite from the center of the Earth is 2R. The gravitational potential energy U of the satellite in its current orbit is given by:

[tex]U = -\frac{G \cdot M \cdot m}{2R}[/tex]

where G is the gravitational constant (6.67 × 10⁻¹¹ Nm²/kg²).

At a distance infinitely far away, the gravitational potential energy U∞ is zero because the gravitational influence of the Earth becomes negligible:

U∞ = 0

The minimum energy ΔE required to move the satellite from its orbit to infinity is the difference in gravitational potential energy:

[tex]\Delta E = U_\infty - U = 0 - \left(-\frac{G \cdot M \cdot m}{2R}\right) = \frac{G \cdot M \cdot m}{2R}[/tex]

In numerical terms, for a 1000 kg satellite, Earth's mass M = 5.97 × 10²⁴kg, and Earth’s radius R = 6.371 × 10⁶ m, the energy required is:

[tex]\Delta E = \frac{(6.67 \times 10^{-11} \, \text{Nm}^2/\text{kg}^2) \times (5.97 \times 10^{24} \, \text{kg}) \times (1000 \, \text{kg})}{2 \times 6.371 \times 10^{6} \, \text{m}}[/tex]

[tex]&= \frac{(6.67 \times 5.97 \times 1000) \times 10^{-11 + 24 + 3}}{2 \times 6.371 \times 10^{6}} \\[/tex]

[tex]&= \frac{39819.9 \times 10^{16}}{12.742 \times 10^6} \\[/tex]

[tex]&= \frac{39819.9}{12.742} \times 10^{16 - 6} \\[/tex]

[tex]&= 3.124 \times 10^{13} \, \text{Nm}[/tex]

After calculation, the minimum energy required is approximately 3.124 x 10¹³ Joules.

Final answer:

The correct word equation to calculate the acceleration of an object is to subtract the initial velocity from the final velocity and then divide the result by the time.

Explanation:

To calculate the acceleration of an object, you would use the following word equation: Subtract the initial velocity from the final velocity and divide the result by the time. This represents the average acceleration, where acceleration is defined as the change in velocity (∆v) divided by the change in time (∆t).

It is crucial to ensure that all units are consistent, typically using meters for distance and seconds for time. An example of calculating acceleration would be: If an object's initial velocity is 5 m/s, its final velocity is 20 m/s, and the time taken to change velocity is 3 seconds, the acceleration a is (20 - 5) / 3 = 15 / 3 = 5 .

Final answer:

The kinetic energy of the teddy bear at the point of impact is calculated using the conservation of energy principle, which yields 22.883 Joules.

Explanation:

The question asks for the kinetic energy of a 0.70 kg teddy bear at the instant it hits the ground after falling from a window sill 3.35 m high. To solve this, we can use the principle of conservation of energy, specifically that the potential energy of the teddy bear at the height from which it is dropped is fully converted into kinetic energy at the moment it hits the ground.

The formula for kinetic energy (KE) is KE = 1/2 m v^2, where m is mass and v is velocity.

However, since the velocity at the moment of impact is not directly provided, we use the gravitational potential energy formula :

PE = mgh, where g is the acceleration due to gravity 9.8 m/s2 and h is the height to find the energy involved.

Because PE at the height is equal to KE at the ground, KE = mgh. Substituting the given values: KE = 0.70 kg * 9.8 m/s2 * 3.35 m.

Thus, the kinetic energy at the instant the teddy bear hits the ground is 22.883 J (Joules).

Answer:

Q = m x C x T

C = Q / m x T

C = 3.25 x 10^3 /0.5kg  x  50K = 130 J/kgK

The substance is gold.

Explanation:

f the ray is incident on the glass-water interface at an angle to the normal greater than 52.5 ∘ then Refractive index of the glass will be  1.26 by critical angle.

The optical medium's refractive index would be a dimensionless number that indicates how well the medium bends light. The refractive index controls however much light would be refracted or twisted when it enters a substance.

Critical angle, in optics, the greatest angle at which a ray of light, travelling in one transparent medium, can strike the boundary between that medium and a second of lower refractive index without being totally reflected within the first medium.

critical angle = [tex]sin^{-1} (1/n)[/tex]

Put the value of critical angle in above equation.

52.5° =    [tex]sin^{-1}(1/n)[/tex] = 1.26  

Refractive index of the glass will be  1.26

learn more about critical angle

https://brainly.com/question/3314727

#SPJ2

Answer: The waves that travel through vacuum is electromagnetic waves.

Explanation:

There are two types of waves:

Mechanical waves: These are the waves that need a medium to travel so that they can transport their energy from one location to another. For Example:  Sound waves

Electromagnetic waves: These are waves which can travel through vacuum. These have electrical and magnetic component associated with them. They travel with the speed of light. They does not require a medium to travel. For Example: Infrared waves, Microwaves

Hence, the waves that travel through vacuum is electromagnetic waves.

The stone is in the air for 6 seconds.

[tex]\texttt{ }[/tex]

Acceleration is rate of change of velocity.

[tex]\large {\boxed {a = \frac{v - u}{t} } }[/tex]

[tex]\large {\boxed {d = \frac{v + u}{2}~t } }[/tex]

a = acceleration ( m/s² )

v = final velocity ( m/s )

u = initial velocity ( m/s )

t = time taken ( s )

d = distance ( m )

Let us now tackle the problem!

[tex]\texttt{ }[/tex]

Given:

height of the cliff = h = 59.4 m

speed of the stone = u = 19.5 m/s

Asked:

total time taken = t = ?

Solution:

[tex]h = ut + \frac{1}{2}at^2[/tex]

[tex]-59.4 = 19.5t - \frac{1}{2}(9.8)t^2[/tex]

[tex]-59.4 = 19.5t - 4.9t^2[/tex]

[tex]49t^2 -195t - 594 = 0[/tex]

[tex]( t - 6 ) ( 49t + 99 ) = 0[/tex]

[tex]t - 6 = 0[/tex]

[tex]t = 6 \texttt{ s}[/tex]

[tex]\texttt{ }[/tex]

[tex]\texttt{ }[/tex]

Grade: High School

Subject: Physics

Chapter: Kinematics

[tex]\texttt{ }[/tex]

Keywords: Velocity , Driver , Car , Deceleration , Acceleration , Obstacle , Projectile , Motion , Horizontal , Vertical , Release , Point , Ball , Wall

A stone is thrown outward from the top of a 59.4-m high cliff with an upward velocity component of 19.5 m/s. The stone is in the air for 6 seconds.

The rate at which an item changes its velocity is known as acceleration, a vector quantity. If an object's velocity is changing, it is acceleration.

Given in the question a stone is thrown outward from the top of a 59.4-m high cliff with an upward velocity component of 19.5 m/s.

Acceleration is rate of change of velocity.

a = acceleration ( m/s² )

v = final velocity ( m/s )

u = initial velocity ( m/s )

t = time taken ( s )

d = distance ( m )

height of the cliff = h = 59.4 m

speed of the stone = u = 19.5 m/s

to find total time taken = t = ?

s = ut + 1/2 at² putting the value we get,

t = 6 sec

The stone is in the air for 6 seconds.

To learn more about acceleration refer to the link:

brainly.com/question/12550364

#SPJ5

With concave lenses, the characteristics of the image do not depend on the placement of the object, but with convex lenses, they do.

Answer:

Energy

Explanation:

Eng 2021