Answer:turn into stone. this will cause erosion for magma to turn to stone
Explanation:
As air is pumped from the vacuum jar the sound level of the ringing bell will decrease until it can no longer be heard . This happens because air must be present in the jar in order for
a) sound to be transferred
b) electricity to flow through the wires
c) the rubber to seal the jar
d) the bell clanger to vibrate
Answer:
A) sound to be transferre
Explanation:
As the vacuum jar is emptied of air, the volume of the ringing bell will gradually diminish until it becomes inaudible. This occurrence can be attributed to the fact that sound necessitates the presence of air in order to propagate. Sound, being a form of mechanical wave, relies on a medium, like air, to transmit its vibrations.
Final answer:
As air is pumped from the vacuum jar, the sound level of the ringing bell will decrease until it can no longer be heard. This happens because air must be present in the jar for sound to be transferred, hence the correct answer is (a) sound to be transferred.
Explanation:
Sound is a form of energy that travels through the vibration of particles in a medium, such as air, water, or solids. When the air is removed from the jar, the number of particles that can vibrate and carry sound waves diminishes, eventually reaching a point where there are not enough air molecules to facilitate the transmission of sound. Sound cannot travel through a vacuum as there is no medium to transmit the vibrations. In comparison to the speed of sound in various gases, the speed of sound in a vacuum is zero, because sound simply does not travel when there is an absence of a conveyable medium. Similarly, the demonstration of sound reinforcement when a tuning fork is placed against a table helps illustrate that the transfer of energy requires a medium. The same principle applies to resonance in containers of air; as the air inside resonates with the sound frequency, we are able to hear the sound due to the air amplifying the vibrations.
A 12 kg bowling ball would require what force to accelerate down and alleyway at a rate of 3 m/s²?
F=
M=
A=
What is the mass of a truck if it produces a a force of 12,000 N while accelerating at a rate of 4 m/s²?
F=
M=
A=
To accelerate a 12 kg bowling ball at 3 m/s², a force of 36 N is needed. The mass of a truck producing a force of 12,000 N while accelerating at 4 m/s² is 3,000 kg.
The question is asking us to calculate the force required to accelerate a 12 kg bowling ball and to find the mass of a truck given the force it produces and its acceleration. These problems involve using Newton's second law of motion, which states that the force on an object (F) is equal to the mass of the object (M) multiplied by its acceleration (A).
For the bowling ball:
Force (F) = Mass (M) times Acceleration (A)
F = 12 kg times 3 m/s²
F = 36 N (newtons)
For the truck:
Force (F) = Mass (M) times Acceleration (A)
12,000 N = M imes 4 m/s²
M = 12,000 N / 4 m/s²
M = 3,000 kg
how are steam powered boats different from sailboats
The picture below shows the positions of the Earth, Sun, and Moon during an eclipse.
What is true of the eclipse shown in the picture?
A) It is a solar eclipse, in which the Earth casts a shadow on the Moon.
B) It is a lunar eclipse, in which the Earth casts a shadow on the Moon.
C) It is a lunar eclipse, in which the Moon casts a shadow on the Earth.
D) It is a solar eclipse, in which the Moon casts a shadow on the Earth.
Answer:
The correct answer is the option B) It is a lunar eclipse, in which the Earth casts a shadow on the Moon.
Explanation:
A lunar eclipse is an astronomical phenomenon that occurs when the Earth passes directly between the Moon and the Sun, causing the Earth's shadow produced by sunlight to be cast over the Moon completely covering it. For this to happen, the three celestial bodies must be formed in a straight line.
Every year there are between 2 and 7 lunar eclipses. According to the position of the Moon with respect to the Earth's shadow, 3 types of lunar eclipses occur.
The difference between a lunar eclipse and a solar eclipse is that, in the first case, the Earth stands between the Moon and the Sun casting a shadow on the Moon, while in a solar eclipse, the Moon stands between the Sun and Earth, casting its shadow to a small part of the latter.
Finally, the correct answer is the option B) It is a lunar eclipse, in which the Earth casts a shadow on the Moon.
Help me .......science
Notes ; l want answer true..........
how many electrons are found in a neutral atom of mercury-200
Answer:
80 electrons
Explanation:
80 electrons
So, there must be 201 - 80 = 121 neutrons. Since atoms are electrically neutral, there must be as many electrons as there are protons. A mercury atom needs 80 electrons to balance the 80 protons
how can you produce more power than an excavator?
Answer:
If the work done by us is greater than the excavator in the given time then we can produce more power than excavator.
Explanation:
Power is defined as work done per unit time. Let’s take an example:
Case I:
If we do 300J work in 2 seconds and excavator 500J work in the same time then:
Power produced by us = 300/2 = 150 watt
Power produced by excavator = 500/2 = 250 watt
In this case power produced by excavator is more than us.
Case II:
If we do 500J work in 2 seconds and excavator 300J work in the same time then:
Power produced by us = 500/2 = 250 watt
Power produced by excavator = 300/2 = 150 watt
In this case power produced by us is more than excavator.
Hence, If the work done by us is greater than the excavator in the given time then we can produce more power than excavator. But it is very difficult to believe in reality.
What advantage does an organism have because of photosynthesis
Photosynthesis provides crucial advantages to an organism by producing organic carbon and releasing oxygen, serving as a foundation for almost all ecosystems. It also facilitates adaptations that allow for efficient energy capture, thus sustaining the food chain and life on Earth.
Explanation:The advantage that an organism has because of photosynthesis is significant. Primarily, it allows autotrophic organisms like plants, certain types of bacteria, and algae, to produce organic molecules from carbon dioxide and water using sunlight. This process not only provides the carbon necessary for organic molecules such as sugars, which can be transformed into other essential compounds like proteins and nucleic acids, but it also results in the release of oxygen into the atmosphere, a crucial element for most living creatures, including humans. Moreover, by converting light energy into chemical energy, photosynthesis fuels nearly all ecosystems except for a few isolated instances like deep sea hydrothermal vents.
Organisms have evolved various adaptations to maximize the benefits from photosynthesis. For example, many photosynthetic organisms have a mixture of pigments, allowing them to absorb a broader range of light wavelengths, crucial for those in competitive environments or with limited access to sunlight, such as underwater plants or those on the rainforest floor.
Ultimately, photosynthesis is central to the food chain as it is at the heart of most energy paths. The energy captured by photosynthesis is what powers the synthesis of ATP via respiration, which in turn fuels the biological activities of heterotrophs - organisms that cannot produce their own food. Therefore, directly or indirectly, photosynthesis is responsible for the sustenance of life on Earth, contributing to the continuous energy transfer among organisms within our ecosystems.
find the value of y when x=3 to the following equation y=2-5x
The speed of any sound wave as it travels through a medium is dependent mainly on the ?
What class of solids is made up of regularly repeating subunits of tightly packed, orderly arrangements of atoms, ions, or molecules?
Does light entering the other substances bend away from the normal line
Ashley made a paper boat and attached paperclips to the edges. In order to control her boat she used a horseshoe magnet. How is Ashley able to control her boat without touching it?
A) The boat is moving with currents in the water.
B) The boat is attracted to the magnet by the force of gravity.
C) The boat is attracted to the magnet by the force of magnetism.
D) Ashley would not be able to do this without touching the boat.
The true answer is C.
The boat is attracted to the magnet by the force of magnetism.
Let me explain. If Ashley made the paper boat and place it on the water, gravity will try to pull the boat down, however no magnets are used in this situation.
Now if magnets are used in this situation and the paper clip is attach to the boat, rather than gravity pulling it down, the magnet will be pulling paper clip, causing the boat to move, so instead of gravity, it's magnetism.
Note: Magnets=Magnetism
Answer:
The answer is C
what properties of semiconductors make them useful in electronic devices
Part 1: Between the moon and Earth, which has a higher maximum surface temperature?
Part 2: Using complete sentences, explain the reason for this.
Between the earth and the moon we have that the highest temperature is the moon, because it blocks the sun from the earth causing it to heat up more.
How is the average temperature of the planet measured?The average temperature of the planet is measured through the variation of the temperature of the sea waters. Scientists and researchers emit low-frequency sound waves through the deepest waters of the Pacific Ocean. There are strategic listening points at various locations on the other side of the Pacific that pick up these sounds.
What is the average temperature of the moon?The Moon has no atmosphere, so temperatures range from -184 degrees Celsius at night to 214 degrees Celsius during the day, with the exception of the poles where the temperature is constantly -96 degrees Celsius.
Earth has a lower average temperature than the moon. The moon has far more average temperature than the earth because the earths atmosphere blocks the suns radiation from directly hiting it.
See more about atmosphere at brainly.com/question/13958926
Answer:
Part 1 Answer: The moon.
Part 2 Answer: The moon doesn't have an atmosphere, meaning it cant let off any of the sun's heat, making the surface temperature very hot compared to Earth's.
Explanation:
I did my research, and this is correct. I hope I helped somebody :)
somebody help me . i hate science omg
When Jamie removes a woolen cap, his hair develops an excess of static charge Which of these BEST explains this phenomenon?
B
Because when a woolen cap rubs Jamie’s hair, electrons are transferred from Jamie’s hair to the woolen cap. As a result, his hair turns positively charged, and the cap turns positively charged. This happens because hair gives up electrons more readily than wool. Note that positive charges do not get transferred; only electrons can get transferred.
The electrons are transferred from Jamie’s hair to the woolen cap by triboelectric effect
What is triboelectric effect?Triboelectric effect, often referred to as triboelectric charging, is a form of contact electrification in which some materials acquire an electrical charge after being cut off from another substance with which they had come into touch.
It is also known as conduction where a negatively charged shares electrons with a neutral body when they are both in contact with each other.
Given data ,
Let the first substance be represented as Jamie's hair
Let the second substance be represented as a woolen cap
Now , the charge on the woolen cap is neutral
From triboelectric effect ,
When the cap is rubbed with the hair , the woolen cap produces static electricity and the excess charges will build upon the surface of the cap
As bound materials rub against one another, negative charges or electrons will be transferred.
Hence , the electrons are transffered from the hair to cap by triboelectric effect
To learn more about triboelectric effect click :
https://brainly.com/question/995874
#SPJ6
At what point in the swing of the pendulum is the potential energy completely converted into kinetic energy?
A)
B)
C)
D)
what is the doppler effect
Answer:
Doppler effect refers to apparent change in frequency/wavelength of the source due to the relative motion between the source and the observer. The frequency increases apparently if the source and observer approach each other and it decreases apparently if the source and the observer move away from each other.
When, apparent frequency increases, it is known as blue-shift and if it decreases, it is known as red-shift.
Explain,in terms of particles,how heat is transferred through the glass wall of a boiling tube
Smoke alarms only emit alpha radiation. Why is it important that it does not emit other radiation?
Smoke alarms emit only alpha radiation, which has limited penetration power and is safe when contained, such as within the plastic casing of the detector. Inhaling alpha-emitting radioactive substances can be harmful, therefore strict containment like in smoke detectors is essential for safety.
It is important that smoke alarms only emit alpha radiation and not other types of radiation because alpha particles have limited penetration power, making them less harmful to humans when contained within a device. Alpha particles in smoke alarms are used to ionize the air and create a small electric current. In the event of a fire, smoke particles disrupt the flow of ions, which reduces the current and triggers the alarm. Many alpha-emitting substances are safe to handle because alpha particles can be blocked by simple barriers, like the plastic embedding in smoke detectors.
Inhaling or ingesting alpha-emitting radioactive dust, however, can be very dangerous as it exposes internal tissues to intense localized radiation, increasing the risk of cellular damage and cancer. For this reason, the containment of americium in smoke detectors ensuring that the radioactive material is not easily dispersed or inhaled is crucial to its safety in residential and commercial environments.
What Is one of many factors that can determine the rate of alcohol absorption
Answer: The answer is C. Food.
A 1,600 kg car is traveling with a speed of 20 m/s. Find the net force that is required to bring the car to a halt in a distance of 50m. Use the formula: a= (vf2-vi2)/2d regarding the relation among acceleration a, final velocity vf, initial velocity vi, and the traveled distance of an object d.
Net force that is required to bring the car to a halt =6400 N
Explanation:
Using kinematic equation to calculate the acceleration a
Vf²= Vi²+ 2 a d
Vf= final velocity=0
Vi= initial velocity= 20 m/s
a= acceleration
d= distance=50 m
0²= (20)²+ 2 a (50)
a=-4 m/s²
Now force= F = ma
m= mass= 1600 kg
F= 1600 (-4)
F=-6400 N
negative sign indicates that the force is opposing the motion of the car.
The illustration shows a light ray striking an object.
In the illustration, the light ray striking the object is-
Question 15 options:
absorbed
stopped
refracted
reflected
In the illustration, the light ray is indeed reflected. Here's why:
Reflection is the phenomenon where light bounces off a surface and changes its direction. In the image, the light ray bends sharply back upon hitting the object, indicating this type of interaction.
Absorption occurs when light is captured by a material and converted into another form of energy, like heat. The illustration doesn't show any such energy dissipation.
Refraction refers to the bending of light as it passes from one medium to another, like air to water. The object appears solid with no clear interface for refraction to occur.
Stopped wouldn't be an accurate description as the light changes direction upon hitting the object. It continues propagating, just in a different path.
Therefore, reflected is the most fitting description for the behavior of the light ray in the illustration.
Which organism gains energy directly from eating the krill? phytoplankton cod leopard seal zooplankton
Answer:
cod
Explanation:
hope this helps!
A soccer player practices kicking the ball into the goal from halfway down the soccer field. The time it takes for the ball to get to the goal from the time it is kicked averages about three seconds. The soccer field is 90 meters long. The player wants to know the average velocity of the ball. Is there enough information to calculate this?
A) No, only average speed can be calculated from the distance of 90 meters and the time of three seconds.
B) Yes, displacement is 45 meters, elapsed time is three seconds, and the direction is toward the goal.
C) No, only average speed can be calculated from the distance of 45 meters and the time of three seconds.
D) Yes, displacement is 90 meters, elapsed time is three seconds, and the direction is toward the goal.
The displacement of the ball is 45 meters elapsed time is 3 seconds, and the direction is toward the goal. Therefore, the average velocity is 15m/s. Therefore, option (B) is correct.
What is the velocity?The velocity of a moving object can be described as a vector measurement of the direction and the rate of motion of an object. The velocity can be defined as the change in the position of the object w.r.t. time.
Velocity can be described as a vector parameter as it exhibits both magnitude and direction. A mathematical expression to determine velocity is shown below:
v = d / t
where d is the distance moved by an object, and t is the time.
Given, the length of the soccer field = 90 meter
The distance traveled by the ball from halfway down the soccer field,
d = 90/2 = 45 m
The time taken by the ball, t = 3s
The average velocity of the ball, v = 45/3 = 15 m/s
Learn more about velocity, here:
brainly.com/question/19979064
#SPJ2
A balloon drifts 50 m toward the east in 6 s; then the wind suddenly changes and the balloon flies 30 m toward the west in the next 5 s. What was the balloon's total displacement?
What is the total amount of energy absorbed by the substance as it completely changes from a solid at 40 degrees Celsius to a gas at 200 degrees celcius
Please help me !!!
The total amount of energy absorbed by a substance as it changes from a solid to a gas at different temperatures can be calculated using the formula Q = m × ΔH. First, calculate the energy required to raise the temperature of the substance. Then, calculate the energy required for the phase changes. Finally, add all the energy values together to find the total amount of energy absorbed.
Explanation:The total amount of energy absorbed by a substance as it completely changes from a solid to a gas can be calculated using the formula:
Q = m × ΔH
Where:
- Q is the total energy absorbed
- m is the mass of the substance
- ΔH is the enthalpy change of the substance
First, calculate the energy required to raise the temperature of the substance from 40°C to its melting point. Then, calculate the energy required to change the substance from a solid to a liquid. Next, calculate the energy required to raise the temperature of the substance from its melting point to its boiling point. Finally, calculate the energy required to change the substance from a liquid to a gas. Add all these energy values together to find the total amount of energy absorbed.
Learn more about total energy absorbed here:https://brainly.com/question/27508106
#SPJ12
Which of the following places would u expect to have the warmest climate ?
a. location #1 with an altitude of 20 feet
b. location#2 with an altitude of 200 feet
c. location#3 with an altitude of 2,000 feet
d. location #4 with an altitude of 20,000 feet
Which of the following is true about diffraction?
a. Sounds with a larger wavelength bend around obstacles more easily.
b. Sounds with a smaller wavelength bend around obstacles more easily.
c. Sounds with higher energies bend around obstacles more easily.
Diffraction is sounds with a larger wavelength to bend around obstacles more easily. Therefore, option A is correct.
What is diffraction ?Diffraction is the interference or bending of waves via an aperture into the area that is geometrically in the shadow of the obstruction or aperture. Effectively, the wave's secondary source is the diffracting element or aperture.
The bending of waves with a larger wavelength around objects or through apertures with a shorter wavelength results in wave diffraction. If this condition is satisfied, diffraction can occur for both light and sound waves.
Wavelengths of visible light span from 380 to 700 nanometers. Light must pass through an opening that is smaller than 1,000 nanometers for diffraction to take place.
Thus, option A is correct.
To learn more about diffraction, follow the link;
https://brainly.com/question/12290582
#SPJ2
Diffraction refers to the bending of waves around obstacles or through small openings. In the case of sound waves, sounds with a larger wavelength bend around obstacles more easily. This is because sound waves have long wavelengths compared to the size of the obstacles.
Explanation:Diffraction refers to the bending of waves around obstacles or through small openings. In the case of sound waves, the correct answer is option a. Sounds with a larger wavelength bend around obstacles more easily. This is because sound waves have long wavelengths compared to the size of the obstacles. On the other hand, light waves have very short wavelengths and behave more like rays, so they do not diffract around large obstacles.