Oxalic acid reacts with sodium hydroxide according to the following equation:
H2C2O4 + 2 NaOH → Na2C20. + 2 H20
A 25.00 mL sample of the H2C2O solution required 19.62 mL of 0.341 M NaOH for
neutralization. Calculate the molarity of the acid.​

Answer:The number of mole in the compounds are:

A. 6.60 g of (NH₄)₂SO₄ contains 0.05 mole.

B. 4.5 kg Ca(OH)₂ contains 60.81 moles

The mole of a substance is related to its mass and molar mass according to the equation:

With the above formula, we can obtain the answer to the questions given above. This is illustrated below:

A. Determination of the number of mole in  6.60 g of (NH₄)₂SO₄

Molar mass of (NH₄)₂SO₄ = 2[14 + (4×1)] + 32 + (4×16)

= 2[14 + 4] + 32 + 64

= 2[18] + 32 + 64

= 36 + 32 + 64

= 132 g/mol

Mass of NH₄)₂SO₄ = 6.60 g

Mole of NH₄)₂SO₄ =?

Mole of NH₄)₂SO₄ =

Mole of NH₄)₂SO₄ = 0.05 mole

Thus, 6.60 g of (NH₄)₂SO₄ contains 0.05 mole.

B. Determination of the number of mole in 4.5 kg Ca(OH)₂

Molar mass of Ca(OH)₂ = 40 + 2(16 + 1)

= 40 + 2(17)

= 40 + 34

= 74 g/mol

Mass of Ca(OH)₂ = 4.5 kg

= 4.5 × 1000

= 4500 g

Mole of Ca(OH)₂ =?

Mole of Ca(OH)₂ =

Mole of Ca(OH)₂ = 60.81 moles

Thus, 4.5 kg Ca(OH)₂ contains 60.81 moles

Learn more: brainly.com/question/17201079

Answer:

Dunes are loose sand hills.

Loess is a compacted wind-blown formation of sediment.

Explanation:

Sand dunes are, as their name implies, made of sand which is itself made of tiny quartz pieces. Sand dunes are present where there is a ready source of broken down sandstone or other type of rock and wind to transport the sand. The dunes are mobile and loose and migrate over time.

Loess comes in vast formations and was created in a very different way. In the last ice age, winds from the north carried sediments loosened and ground by glaciers southwards. There, the sediments accumulated in large formations and became compacted over time.

Answer:

999 kJ

Explanation:

Given are two reactions with enthalpies Δ[tex]H_1=-2,439\ kJ[/tex] and Δ[tex]H_2=3,438\ kJ[/tex]

We know enthalpy is an additive property.

Thus the overall chemical equation can be obtained from adding both the two elementary equations.

Therefore the overall enthalpy is the summation of enthalphy change in each equation.

Δ[tex]H_{overall} =[/tex]Δ[tex]H_1+[/tex]Δ[tex]H_2[/tex]

Δ[tex]H_{overall}[/tex] [tex]=-2,439+3,438=999\ kJ[/tex]

Therefore the overall enthalpy is 999 kJ.

Answer: D

Explanation:

just took it

Answer:

m = 0.03  × 10⁴ g

Explanation:

Given data:

Specific heat capacity = 0.749 j/g.°C

Heat absorbed = 5.0 × 10⁴ J

Initial temperature = 26.0 °C

Final temperature = 275.0 °C

Mass = ?

Solution:

Formula:

Q = m.c. ΔT

Q = amount of heat absorbed or released

m = mass of given substance

c = specific heat capacity of substance

ΔT = change in temperature

ΔT  = T2-T1

ΔT  = 275.0 °C - 26.0 °C

ΔT  = 249  °C

Q = m.c. ΔT

m = Q / c. ΔT

m =  5.0 × 10⁴ J / 0.749 j/g.°C  × 249  °C

m =  5.0 × 10⁴ J / 186.5  j/g

m = 0.03  × 10⁴ g

The mass of glass required to absorb 5.00x10⁴ J of heat with a temperature change from 26.0°C to 275.0°C, using a specific heat capacity of 0.749 J/g°C, is approximately 268 grams.

We can use the formula for heat absorption:

[tex]q = m \times C_p \times \Delta T[/tex]

where:

Let's rearrange the formula to solve for m:

[tex]m = q / (C_p \times \Delta T)[/tex]

Substituting in the given values:

[tex]m = 5.00 \times 10^4 J / (0.749 J/g \textdegree C \times 249.0 \textdegree C)[/tex]

Simplifying the calculation:

[tex]m = \frac {5.00 \times 10^4 J}{ 186.501 J/g} = 268 g[/tex]

So, the mass of the glass needed to absorb 5.00x10⁴ J of heat, with the given temperature change, is approximately 268 grams.

Answer:

7

Explanation:

Because cobalt's a transition metal, the 7 'd'-type electrons can count as valence electrons, though they rarely react with anything.

Answer:

3. The atoms on the left side of the arrow are the same as the atoms on the right, but are arranged differently.

Explanation:

A chemical reaction is represented by a chemical equation which show the reactant and products. Reactants are written on left side of arrow while products are written on right side. The number of atoms are remain same however arrangement of atoms is different on both side.

For example:

6H₂O + 6CO₂ + energy  →   C₆H₁₂O₆ + 6O₂

it is known from balanced chemical equation that 6 moles of carbon dioxide react with the six moles of water and created one mole of glucose and six mole of oxygen. The number of atoms are same on both side however arrangement of atoms is different.

Answer:

C. Speed is the distance per unit of time. Velocity is the displacement per unit of time.

This answer accurately describes the difference between speed and velocity.

Explanation:

A. If speed is constant, then velocity is also constant.

The above statement is not correct, the correct statement is if speed is constant its velocity is not necessarily constant.

Example: An object in uniform circular motion has constant speed but its velocity changes at every instant due to change in direction.

B. Speed requires direction. The direction doesn't matter when calculating velocity.

The above statement is not correct, the correct statement is

Speed does not require direction. The direction is necessary for calculating velocity.

Speed, a scalar quantity, requires magnitude only not the direction.

Velocity is vector quantity, requires magnitude as well as direction.

C. Speed is the distance per unit of time. Velocity is the displacement per unit of time.

The above statement is correct i.e.

Speed is the distance per unit of time. Velocity is the displacement per unit of time.

9.17 mL

In this question we are given;

NaOH(aq) + HCl(aq) → H2O(l) + NaCl(aq)

We are required to determine the volume of the alkali, NaOH used;

Molarity = Number of moles ÷ Volume

Thus, rearranging the formula;

Moles = Molarity × volume

          = 0.055 M × 0.025 L

          = 0.001375 moles

Therefore;

Hence; Moles of NaOH = 0.001375 moles

Molarity = Moles ÷ Volume

Volume = Moles ÷ Molarity

Therefore;

Volume of NaOH = 0.001375 moles ÷ 0.150 M

                             = 0.00917 L, but, 1 L = 1000 mL

                             = 9.17 mL

Therefore, the volume of NaOH required is 9.17 mL

Answer:

Explanation:

Single replacement:

It is the reaction in which one elements replace the other element in compound.

General equation:

AB + C → AC + B

1) zinc and Copper sulfate

Zn + CuSO₄   →   ZnSO₄ + Cu

Zinc is more reactive than copper it displaces the copper from copper sulfate and form zinc sulfate.

2) Aluminium and Copper sulfate

2Al + 3CuSO₄   →  Al₂(SO₄)₃ + 3Cu

Aluminium is more reactive than copper it displaces the copper from copper sulfate and form aluminium sulfate.

3) Zinc and silver nitrate

Zn + 2AgNO₃ → Zn(NO₃)₂ + 2Ag

zinc is more reactive than silver it displaces the silver from silver nitrate and form zinc nitrate.

4) copper and silver nitrate

Cu + 2AgNO₃  → Cu(NO₃)₂ + 2Ag

copper is more reactive than silver it displaces the silver from silver nitrate and form copper nitrate.

Final answer:

In a single-displacement reaction, one element replaces another element in a compound. The general equation for a single-displacement reaction is A + BC → AC + B.

Explanation:

In a single-displacement reaction, one element replaces another element in a compound. These reactions occur when a more reactive element displaces a less reactive element from its compound.

For example, in the reaction F2 + FeI3, fluorine (F2) replaces iodine (I) in the compound FeI3, resulting in the formation of FeF3:

2F2 + FeI3 → 2FeF3 + 3I2

The general equation for a single-displacement reaction can be written as A + BC → AC + B, where A is the more reactive element that displaces B from its compound BC.

Answer:True?!

Explanation:

Can someone answer this please I will fix it tomorrow if i remember

Answer:

true

Explanation:

Answer:

soil A mixture of weathered rock and decayed plants and animals. Plants need soil to grow. Soil is the top layer of Earth's land surface, in many places.

Explanation:

Soil is the mixture composed of eroded rocks, organic matter from decayed plants and animals, minerals, and other materials vital for plant growth and ecological foundations.

The material you're asking about, which is a mixture of small pieces of rock with decayed plants and animals, is known as soil. Soil is a blend of various components, including eroded rock, minerals, organic matter, and other materials. These ingredients are critical for supporting plant life and form the fundamental layers of terrestrial ecosystems.

The organic matter in soil typically comes from decaying plant and animal matter, which can vary from freshly fallen leaves to more fully decomposed materials, known as detritus. Additionally, soil may include biologic precipitates, fragments of rocks such as sand, silt, or clay, and in some cases, paths created by earthworms and burrows from moles.

Answer:

[tex]8.4322\times10^{24} atoms[/tex] atoms are in 14 moles of cadmium.

Explanation:

Cadmium is a white and  silvery  metal  that is found in the curst of the earth.During the  production process of metals such as lead, copper, zinc, cadmium is extracted

Cadmium is present in some foods and is emitted when fossil fuels like as coal and oil is used, smoking cigarettes. It is used in craft glazes, metal batteries, and coatings.

We know that 1 mole of  Cadmium (Cd contains) 6.023*1023 atoms, which is Avogadro's number.

So in 14 Grams of Cadmium, the number of atoms present is,

=>14×number atoms present in one cadmium atom

=>[tex]14\times 6.023\times10^{23}[/tex]

=>[tex]8.4322\times10^{24} atoms[/tex]

The number of atoms of Cadmium present in 14 moles is 84.322  [tex]\rm \bold{\times\;10^2^3}[/tex] atoms.

The number of atoms in a mole of compounds can be given by the Avagadro number. The Avagadro number has been equal to 6.023 [tex]\rm \bold{\times\;10^2^3}[/tex]

Thus, 1 mole =  6.023 [tex]\rm \bold{\times\;10^2^3}[/tex] atoms

The given element has been Cadmium. The moles of Cadmium is 14 moles.

By simplifying with unitary method:

1 mole =  6.023 [tex]\rm \bold{\times\;10^2^3}[/tex] atoms

14 moles = [tex]\rm \dfrac{6.023\;\times\;10^2^3}{1}\;\times\;14[/tex] atoms

14 moles of Cadmium = 84.322 [tex]\rm \bold{\times\;10^2^3}[/tex] atoms.

The number of atoms of Cadmium present in 14 moles is 84.322  [tex]\rm \bold{\times\;10^2^3}[/tex] atoms.

For more information about atoms in a mole, refer to the link:

https://brainly.com/question/6683218

Answer:

Volume of gas ( V ) = 19.8935 L

Explanation:

Data Given:

no. of mole of gas (n) = 21.0 mole

Pressure P = 78.0 atm

Temperature T = 900 K

Ideal gas constant = 0.08206  L atm K⁻¹ mol⁻¹

Volume of gas = ?

Formula used for Ideal gases

                                                PV = nRT

As we have to find volume of the gas:

We will rearrange the ideal gas equation as below:

                                         V = nRT / P  ........................................... (1)

Put value in equation (1)

                  V =  21.0 mol x 0.08206  L atm K⁻¹ mol⁻¹ x 900K / 78.0 atm

                  V = 19.8935 L

Volume of gas V = 19.8935 L

Answer:

Neither  

Explanation:

I plotted the graph of atomic radius vs. ionization energy for the first 10 elements.  

It shows neither a direct nor an inverse relationship.

However, it is clear that atomic size decreases as ionization energy increases.

Plotting atomic radius against first ionization energy reveals an inverse relationship; as atomic radius increases, the first ionization energy typically decreases.

If you plotted atomic radius versus first ionization energy, the graph would reveal an inverse relationship. This is because, generally, as atomic radius increases, the first ionization energy decreases. The ionization energy is affected by the principal quantum number (n) and the effective nuclear charge (Zeff), which relates to the strength of attraction between the nucleus and the valence electrons. Hence, a larger atomic radius means that the valence electrons are further from the nucleus and more shielded by other electrons, reducing the energy required to remove them. When plotting a graph of atomic radius versus first ionization energy, one would observe that points on the graph move downward as you go from top to bottom (from elements with a smaller atomic radius and higher ionization energy to elements with a larger atomic radius and lower ionization energy).

Answer:

The correct answer is A balanced

Explanation:

Redox reaction belongs to specific type of chemical or biochemical reaction in which oxidation and reduction occurs simultaneously.

      For example

           6CO2+12H2O=C6H12O6+6O2+6H2O

The above reaction is a redox reaction because in this reaction CO2 is reduced to form glucose whereas H2O is being oxidized to form O2.

   Redox equations are balanced when the total increase in the oxidation number equals the total decrease in the oxidation number.

Answer:

A. balanced

Explanation:

Hello,

In this case, redox reactions undergo when one the elements at the reactants suffers an increase in its oxidation state and other elements suffers a decrease in its oxidation state. Thus, one could consider the following example:

[tex]H_2+I_2\rightarrow HI[/tex]

In that case, both hydrogen and iodine have zero as their oxidation states at the reactants whereas they go +1 and -1 respectively at the hydroiodic acid as shown below:

[tex]H_2^0+I_2^0\rightarrow H^+I^-[/tex]

In such a way, each hydrogen increases by 1 electron (two electrons in total as there two hydrogens) and iodine decreases by 1 electron (two electrons in total as there two iodines). Thus, the balance turns out:

[tex]H_2^0\rightarrow 2H^++2e^-\\I_2^0+2e^-\rightarrow 2I^-\\\\\\2H_2+2I_2\rightarrow 4HI\\\\H_2+I_2\rightarrow 2HI[/tex]

Therefore, redox equations are A. balanced when the total increase in oxidation numbers equals the total decrease in oxidation.

Best regards.

Answer:[tex]1.08\times 10^{-8}m[/tex]

Explanation:

Let [tex]E_{n}[/tex] be the energy of the electron in [tex]n[/tex]th orbit.

According to Bohr's model,

[tex]E_{n}=\frac{-kz^{2}}{n^{2}}[/tex]

where [tex]k=2.179\times 10^{-18}J[/tex]

[tex]Z[/tex] is the atomic number

[tex]n[/tex] is the orbit number.

Given,[tex]z=3[/tex]

Energy required for transition from [tex]n=1[/tex] to [tex]n=4[/tex] is [tex]\frac{k(3)^{2}}{1^{2}}-\frac{k(3)^{2}}{4^{2}}=\frac{15k\times 9}{16} =18.38\times 10^{-18}J[/tex]

Since,wave length is [tex]\frac{hc}{E}[/tex]

where [tex]h[/tex] is the plancks constant.

[tex]c[/tex] is the speed of light.

[tex]c=3\times 10^{8}\\h=6.63\times 10^{-34}m^{2}KgS^{-1}[/tex]

So,wave length is [tex]\frac{6.63\times 10^{-34} \times 3\times 10^{8}}{18.38\times 10^{-18}} =1.08\times 10^{-8}m[/tex]

Final answer:

To determine the wavelength of light absorbed by a Li2+ ion moving from n = 1 to n = 4, we use the Bohr model and adjust the Rydberg formula by the square of the nuclear charge. This yields the energy difference, which can be converted to wavelength using the relationship between energy, wavelength, and the speed of light.

Explanation:

The question involves using the Bohr model of the atom to calculate the wavelength of light that must be absorbed to excite an electron. For a single-electron system like the Li2+ ion, the energy difference between two orbits (n = 1 and n = 4) can be calculated using the Rydberg formula for hydrogen-like atoms:

E = Rydberg constant * (1/n12 - 1/n22)

Here, n1 and n2 are the principal quantum numbers of the initial and final states, respectively. Since the Li2+ ion has a higher nuclear charge than hydrogen, we must account for this by multiplying the Rydberg constant by the square of the nuclear charge (Z2). The energy of the photon absorbed is then transformed into a wavelength using the relationship:

c =
λ * E
Where c is the speed of light and
λ is the wavelength. By plugging in the appropriate values and constants, we can solve for the wavelength of light in nm.

Answer:

Mass = 547.2 g

Explanation:

Given data;

Mass of F₂ = ?

Moles of F₂ = 14.4 mol

Solution:

Formula

Number of moles = mass/ molar mass

Mass = number of moles × molar mass

Molar mass of F₂ =  38 g/mol

Mass = 14.4 mol × 38 g/mol

Mass = 547.2 g

The mass of 14.4 moles of F₂ is 547.2 grams.

To solve this, we need to know the molar mass of fluorine gas (F₂). Each fluorine atom has an atomic mass of approximately 19.0 g/mol. Since F₂ is a diatomic molecule, its molar mass is:

19.0 g/mol × 2 = 38.0 g/mol

Now, we multiply the molar mass by the number of moles given:

14.4 mol × 38.0 g/mol = 547.2 g

Thus, the mass of 14.4 moles of F₂ is 547.2 grams.

Answer:

[tex]\large \boxed{\text{0.30 g }}[/tex]

Explanation:

1. Calculate the moles of NaOH

[tex]\text{Moles of NaOH} = \text{0.050 L solution} \times \dfrac{\text{0.15 mol NaOH}}{\text{1 L solution}} = \text{0.0075 mol NaOH}[/tex]

2. Calculate the mass of NaOH

[tex]\text{Mass of NaOH } = \text{0.0075 mol NaOH } \times \dfrac{\text{40.00 g NaOH }}{\text{1 mol NaOH }} = \textbf{0.30 g NaOH}\\\\\text{You need $\large \boxed{\textbf{0.30 g of NaOH}}$ to prepare the solution}[/tex]

Answer:

1st you read the column that has the subject then the tally column last you determine/read the frequency column

Explanation:

- Describe how you would make the salt from the reactants.

CuO + 2 HCl → CuCl₂ + H₂O

- Describe how you would purify the salt from the reaction mixture.

Filter the solution and let the product crystallize.

Explanation:

The reaction between copper oxide (CuO) and hydrochloric acid (HCl) will produce copper chloride (CuCl₂) and water:

CuO + 2 HCl → CuCl₂ + H₂O

-Describe how you would make the salt from the reactants

In a beaker which contain cooper oxide add the hydrochloric acid. To avoid working with concentrated hydrochloric acid, the acid may be diluted with water but make sure the add the stoechiometric amount (and a little bit of excess) in respect with the copper oxide.

-Describe how you would purify the salt from the reaction mixture.

Let the reaction proceed and then filter the solution to remove the unreacted cooper oxide.

Let the filtered solution, which contain copper chloride, water and unreacted hydrochloric acid, to stand undisturbed for several days. You may see the crystals growing from the solution. To speed up the process you may reduce the temperature.

Learn more about:

purifying compounds

https://brainly.com/question/5586971

https://brainly.com/question/4757187

#learnwithBrainly

To produce pure crystals of copper chloride, react copper oxide with hydrochloric acid to form copper chloride and water, then purify by filtration and evaporation to obtain copper chloride crystals.

To produce pure crystals of copper chloride from copper oxide and hydrochloric acid, the reaction involves a simple acid-base reaction, following the general word equation: acid + metal oxide → salt + water. First, copper oxide would react with hydrochloric acid to form copper chloride and water. This reaction can be represented by the equation CuO(s) + 2HCl(aq) → CuCl2(aq) + H2O(l).

To purify the copper chloride, the resulting mixture would need to be filtered to remove any unreacted copper oxide. Then, the copper chloride solution would be evaporated to obtain the crystals. This evaporation could either be done by gently heating the solution to accelerate the process or by allowing the water to evaporate naturally over time.

Answer:

The correct answer is c atomic number

Explanation:

When two atoms contain same atomic number or proton number then these two atoms are called isotopes of each other.

  For example protium and tritium are isotopes of each other as they contain same atomic number that is 1.

Ni (s) + 2 HNO₃ (aq) → Ni(NO₃)₂ (aq) + H₂ (g)

Explanation:

We have the following balanced chemical equation:

Ni (s) + 2 HNO₃ (aq) → Ni(NO₃)₂ (aq) + H₂ (g)

where:

(aq) - aqueous  (dissolved in water)

(g) - gaseous

To balance the chemical equation the number of atoms of each element entering the reaction have to be equal to the number of atoms of each element leaving the reaction, in order to conserve the mass.

Learn more about:

balancing chemical equations

https://brainly.com/question/13915102

#learnwithBrainly

The most efficient method would be to passing a magnet through the mixture.

Explanation:

a) passing a magnet through the mixture

It is the most efficient method to separate the iron fillings and the salt. The iron will be attracted by the magnet, because the presence of the unpaired electrons in the iron which induces paramagnetic properties and it will be attracted by the magnet, while the salt, which most probably sodium chloride which does not have unpaired electrons so it will be a diamagnetic compound that is not be attracted by a magnet.

b) sorting the mixture by hand

It is a ineficient way to separate the iron from the salt because it will require a lot of energy and time.

c) distilling the mixture

It is extremely hard to do that because iron and salt have very high boiling points.

Learn more about:

separating mixtures

https://brainly.com/question/64216

https://brainly.com/question/13360045

#learnwithBrainly

The best way to separate a mixture of iron filings and salt is to use a magnet, which attracts the iron. The other methods (sorting by hand, distilling) are less efficient and not suitable for this mix.

The most efficient method to separate a mixture of iron filings and salt is to pass a magnet through the mixture. This is because iron is magnetic, while salt is not. The magnet will attract the iron filings and leave the salt behind. Following this process, you could rinse or carefully brush the iron filings off the magnet. This is a simple process called magnetic separation.

Sorting the mixture by hand or distilling the mixture is not recommended. Manually sorting can be tedious and might not effectively separate all the iron filings while distilling is usually used to separate liquid mixtures, not solids like iron filings and salt.

https://brainly.com/question/34301663

#SPJ12

Answer: It would be decomposition :)

Answer:

MnSO₄ → MnO+SO₃ is a decomposition reaction.

Explanation:

In a decomposition reaction, a single substance breaks down or breaks down, producing two or more different substances. In other words, decomposition reactions are those that form two or more substances from a compound. In this reaction the atoms that form a compound are separated to give the products according to the formula:

AB → A + B

This type of reactions can occur spontaneously or caused by certain external factors, such as heat, that promote the breakdown of the molecule into simpler substances.

There are 3 types of decomposition reactions, depending on the external factor that causes the reaction:

Then MnSO₄ → MnO+SO₃ is a decomposition reaction.

Answer:

self regulation

Explanation:

Answer:

A) Self-regulation

Explanation:

A self-regulated organism takes measures to balance its own survival with the scarce resources that the enviroment offers. In this case, the insect population is self-regulating because it is responding to changes in the food supply, and adapts itself accordingly.

In a way, self-regulation is like supply and demand. As supply of food decreases, but demand stays the same, scarcity ensues. This causes the need to reduce demand until a new equilibrium is reached, where demand and supply are equal.

Answer:

Oxidation State of H in H₂SO₄  = +1

Oxidation State of S in H₂SO₄  = +6

Oxidation State of O in H₂SO₄  = -2

Explanation:

Oxidation number:

oxidation number is an apparent charge of an atom in a compound.

the total charge on a compound is zero

So for H₂SO₄ total charge = 0

Hydrogen donate an electron in H₂SO₄ and have +1 charge that is oxidation number

***so to calculate oxidation number of  Sulfur and Oxygen in H₂SO₄

oxygen have 2- state

O.N. of H = 1+

O.N. of O = 2-

O.N. of S = x

H₂SO₄ =0

put values

(+1)2 + S + (-2)4=0

+2 + S -8 =0

S = 0-2 + 8

S = +6

****Now to find oxidation number of Oxygen

O.N. of H = 1+

O.N. of O = x

O.N. of S = +6

H₂SO₄ =0

put values

(+1)2 + (+6) + (O)4=0

+2 + 6 - (O) 4 =0

(O)4 = 0-2 - 8

(O)4 = -8

O = -8/4

O = -2

***Now to find oxidation number of Oxygen

O.N. of H = 1+

O.N. of O = x

O.N. of S = +6

H₂SO₄ =0

put values

(H)2 + (+6) + (-2)4=0

(H)2 + 6 - 8 =0

(H)2 = 0 - 6 + 8

(H)2 = +2

H = +2/2

H = +1

Two compounds can have same percentage composition but different molar mass, where the composition of each element contributed into the total mass can be same for two compounds irrespective of their molar mass.

Percentage composition of a compound is the mass by percent of its constituent elements of groups.  Molecular mass of a compound is the sum of the mass of its constituent elements.

Let AB₂ be a compound and the total molecular mass be X,the percentage of A be a% and that of b being b%, where b will be greater since there are 2 B groups.

There can be compounds with a % of A and b% of B but with different molar mass. Thus, there will be compounds which contains same mass percent of one elements.

To find more on percent composition, refer here:

https://brainly.com/question/17505281

#SPJ3

Final answer:

Two compounds can have the same percentage composition but different molecular masses because they can be structural isomers, which have the same number and types of atoms but arranged differently resulting in different properties and molar masses.

Explanation:

Compounds with Same Percentage Composition and Different Molecular Masses

Two compounds can have the same percentage composition but different molecular masses due to the phenomenon of isomerism. Isomers are molecules that have the same molecular formula, meaning the same number and types of atoms, but with the atoms arranged in a different manner. This results in different structures and potentially different physical properties, including molecular masses. The percentage composition only reflects what percent of the compound's total mass is made up by each type of atom, regardless of the compound's structure.

For instance, structural isomers have the same chemical composition but different arrangements of atoms and different chemical bonding, leading to different molar masses. To determine the percentage composition, one would divide the atomic mass of each element by the total molar mass of the molecule. However, this calculation doesn't account for the structural differences between isomers.

Examples of this include butane and isobutane, both of which have the molecular formula C4H10 but differ in structure and therefore in their molar mass. Such scenarios illustrate the importance of not only considering the percentage composition but also the molecular structure when identifying and comparing substances.

Answer:

Quantum mechanics or physics

Explanation:

Answer: hydrogen has 0.0504% and Fluorine has 0.950%

Explanation: H= 1.00794

F= 18.9984

1 X 1.00794+ 1 X 18.9984= 20.00778g/mol

H= 1.00794/20.00778= 0.0504%

F-18.9984/20.00778= 0.950%

Answer:Brain

Explanation:

Answer:

It is the nerves :)

Explanation: