Please use the below balanced equation to answer this question.    2H2(g)  +  O2(g)  ->   2H2O(l) How many grams of water will be produced if I have 83.4 liters of oxygen gas at STP?
A) 48.65 grams H2O
B) 65.78 grams H2O
C) 85.71 grams  H2O
D) 134.18 grams H2O

Answers

Answer 1
At STP (standard temperature and pressure conditions), 1 mol of any gas occupies 22.4 L 
This rule is applied to O₂
22.4 L volume occupied by 1 mol
Therefore 83.4 L occupied by - 1/ 22.4 x 83.4 = 3.72 mol
stoichiometry of O₂ to H₂O is 1:2
then the number of moles of water produced - 3.72 mol x 2= 7.44 mol
mass of water produced - 7.44 mol x 18.01 g/mol = 134.1 g
correct answer is D


Related Questions

The solute that is found in the greatest amount in ocean water is______.

Answers

The answer is salt. Salt is what makes up a huge amount of ocean water. The only other thing I would say is "water", but that would sound too obvious to say.

The solute that is found in the greatest amount in ocean water is salt.

MARINE WATER:Marine water body refers to water bodies that contain a great amount of salt. Examples are oceans, seas etc.

On the other hand, freshwater contains very little or no amount of salt. They include rivers, lakes, ponds etc.

Since ocean water is an example of marine water body, thus, it contains a great amount of salt as a solute.

Learn more about oceans at: https://brainly.com/question/11803537

which statement accurately describes the origin and expansion of the universe

Answers

cosmic background radiation is leftover thermal energy from the Big Bang.

Answer:

Cosmic background radiation is leftover thermal energy from the big bang.

Explanation:

How many grams are in .98 mols of C6H12O6 (*round to the nearest hundredth and include the unit "g C6H12O6" after your number)

Answers

Find 1 mol
6C = 12*6 = 72
12H=1*12 = 12
O6 = 16*6 = 96
Total = 180 grams

0.98 mol
0.98 * 180 = 176.40 My answer would have to go out to 176.40

Note: anyone responding will use rounded numbers for the atomic mass. All periodic tables have variations in them. Use your periodic table to get the better atomic mass.

Answer
176.40 g C6H12O6 <<<<

If a reaction has an equilibrium constant slightly greater than 1, what type of reaction is it?

Answers

reversible, flavoring products

What is the volume of 120 mg of water?
A. 1.2 dL
B. 120 mL
C. 120 L
D. 1.2 L

Answers

I would say B but I am not sure so sorry if it is wrong!!

Net ionic equations for potassium sulfate plus calcium phosphate yields

Answers

Balanced chemical reaction:
3K₂SO₄(aq) + Ca₃(PO₄)₂(s) → 2K₃PO₄(aq) + 3CaSO₄(s).
Ionic reaction: 
6K⁺(aq) + 3SO₄²⁻(aq) + Ca₃(PO₄)₂(s) → 6K⁺(aq) + 2PO₄³⁻(aq) + 3CaSO₄(s).
Net ionic reaction: 3SO₄²⁻(aq) + Ca₃(PO₄)₂(s) → 2PO₄³⁻(aq) + 3CaSO₄(s).
aq(aqueous) means dissolved in water.
s(solid) means that salt not dissolved in water.
This chemical reaction is double displacement reaction - cations and anions of the two reactants switch places and form two new compounds.

How do you think the number of valence electrons relates to an element's chemical properties?

Answers

Answer:

Electrons in the outermost shell are called valence electrons, because it is their interactions that determine the chemical properties of an element. The columns that were set up to group elements by similar chemical properties turn out to be the exact same columns defined by the number of valence electrons.

The valence electron of an element determines the group of the element and elements in the same group have similar chemical properties.

The valence electron of an element indicates its the group of the element in the periodic table. Elements found within the same group in the periodic table have similar chemical properties.

For example:

group 1 elements (Alkali metals) have similar chemical propertiesgroup 7 elements (halogens) have similar chemical properties

Thus, we can conclude that valence electron of an element determines the group of the element and elements in the same group have similar chemical properties.

Learn more here:https://brainly.com/question/9678979

An isotope contains 56 protons, 54 electrons, and 74 neutrons. What is the identity of the isotope?

Answers

the isotope is Barium
hope this helps

Answer:

The element will be represented as : [tex]Ba_{56}^{130}[/tex]

Explanation:

The identity of an element (isotope) is with its atomic number.

The atomic number is the number of protons in the element.

Irrespective of the number of electrons / neutrons the atomic number will be equal to the number of protons only.

atomic number of the isotope is 56.

The element with 56 atomic number is Barium

The mass number of Barium = protons + neutrons = 56 + 74 = 130

The element will be represented as : [tex]Ba_{56}^{130}[/tex]

Calculate the ph of a mixture that contains 0.18 m of hno3 and 0.24 m of hbro

Answers

HNO3 is a strong acid while HBrO is weak acid.
Therefore we ignore the presence of the weak acid such that we consider the pH of the strong acid.
Therefore; since pH= - log (H+)
Hence pH= -log 0.18
                = 0.745
Thus the pH of the mixture is 0.745

The pH of the mixture solution is 0.745

The concentration of [tex]HNO_3[/tex] = 0.18 m

The concentration of [tex]HBrO[/tex] = 0.24 m

It is required to calculate the pH of the mixture solution.

What is pH?

pH, a quantitative measure of the acidity or basicity of aqueous or other liquid solutions.

We know that [tex]HNO_3[/tex] is a strong acid while HBrO is weak acid.

Therefore we ignore the presence of the weak acid such that we consider the pH of the strong acid.

since

pH= - log (H⁺)

Hence pH= -log (0.18)

             pH  = 0.745

Therefore, the pH of the mixture solution is 0.745

To learn more about pH, Click here:

https://brainly.com/question/491373

1-Which of the following statements is not a description of Saturn?

Known for its rings
Largest planet in the solar system
One of the gas giant planets
Has several moons
2-Which of the following statements is not a description of Mars?

Has a reddish color
Has a thin atmosphere
One of the rocky planets
Has no moons
3-Planets move around the sun in elliptical orbits.

True
False
4-Which of the following statements is not a description of asteroids?

They orbit the sun.
They vary in size and shape.
Most of them lie in a belt between Earth and Mars.
They are thought to be remains that never formed a planet.
5-According to the chart below, which planet has the smallest inner core? (look at image)
Mars
Jupiter
Venus
Earth
6-Two planets are orbiting a star. Planet A is closer to the star than Planet B. Which description explains the expected motion of Planets A and B?

The average speed of Planet B is faster than that of Planet A.
The average speed of Planet B is equal to that of Planet B.
The orbital period of Planet B is shorter than that of Planet A.
The orbital period of planet A is shorter than that of Planet B.

Answers

Answer:

1. Largest planet in the solar system.

2. Has no moons.

3. True

4. Most of them lie in a belt between Earth and Mars.

5. Earth

6. The orbital period of planet A is shorter than that of Planet B.

Explanation:

1. Saturn is the second largest planet of the solar system. It is a gaseous planet which is known as the Ringed planet because of the beautiful ring system which are visible from Earth through telescope. It has several moons - more than 60 moons.

2. Mars is known as red planet. It is the fourth planet from the sun. It is one of the rocky planets having very thin atmosphere. It has two moons - Phobos and Deimos.

3. From Kepler's first law of planetary motion we know that planets move around Sun in an elliptical orbit with sun at its foci. Thus, the given statement is true.

4. Asteroids are irregular shaped and sized rocky objects orbiting sun . These are thought to be remains of  a never formed planet between Mars and Jupiter. Thus, majority of the asteroids are found between the orbits of these two planets.

5. There are four terrestrial planets ( Mercury, Venus, Earth and Mars). The terrestrial planets have the following layers- the core, the mantle and the crust. Out of these four planets- the Earth has the smallest inner core.

6.  From Kepler's laws about planetary motion, we know that the planet closer to the Star moves with greater orbital speed and thus has shorter orbital period than the rest. Here, planet A is closer to the star than planet B. Thus, planet A would have shorter orbital period than planet B.

Final answer:

This detailed answer provides accurate explanations for each question, covering topics related to the description of Saturn, Mars, elliptical orbits, asteroids, planet cores, and orbital motion.

Explanation:

1- The statement 'Largest planet in the solar system' is not a description of Saturn. Saturn is actually the second-largest planet in our solar system, with Jupiter being the largest.

2- The statement 'Has no moons' is not a description of Mars. Mars actually has two moons, named Phobos and Deimos.

3- The statement is true. Planets do move around the sun in elliptical orbits. An elliptical orbit is a slightly elongated circle, and this is the shape followed by the planets in our solar system.

4- The statement 'They are thought to be remains that never formed a planet' is not a description of asteroids. Asteroids are actually rocky fragments that orbit the sun but are too small to be considered planets. Some asteroids may be remnants from the early formation of the solar system, but not all of them.

5- According to the chart, Venus has the smallest inner core. The chart shows that Venus has the smallest inner core compared to Mars, Jupiter, and Earth.

6- The description that explains the expected motion of Planets A and B is that the orbital period of Planet B is shorter than that of Planet A. When a planet is closer to the star, its orbital period is shorter, which means it completes its orbit more quickly than a planet that is farther away.

Learn more about Planets and orbital motion here:

https://brainly.com/question/32109915

#SPJ6

The number of moles of mgo produced when 0.20 mole of o2 reacts completely is ________. 2mg + o2 → 2mgo

Answers

From the balanced equation o the reaction:
2Mg + O2 → 2MgO
from this equation we can see that:
1 mole of O2 gives → 2 moles of MgO
So 0.2 moles of O2 will give → ????
So the number of moles of MgO = (0.2 mol O2 )* (2 mol MgO) / (1 mol of O2)
                                                      = 0.4 

The reaction of 0.20 moles of oxygen on complete utilization produces 0.40 moles of MgO.

From the reaction,

1 mole of oxygen produced 2 moles of MgO.

So, 0.20 moles of oxygen produces:

Moles of MgO produced = 0.20 [tex]\times[/tex] 2

Moles of MgO produced = 0.40 moles.

The reaction of 0.20 moles of oxygen on complete utilization produces 0.40 moles of MgO.

For more information, refer the link:

https://brainly.com/question/4066080?referrer=searchResults

How many molecules does 0.773 moles of Ca(OH)2 contain?

Answers

Hello!

0,773 moles of Ca(OH)₂ contain 4,653 · 10²³ molecules.

To calculate that we need to use the Avogrado Number. This number tells us the number of molecules that are in 1 mol of a substance. The name "Avogrado Number" was given in honor of Amadeo Avogadro, an Italian scientist who studied atomic theory. The number is 6,02· 10²³ molecules/mol. To calculate the number of Ca(OH)₂ molecules we use the following conversion factor:

[tex]nmolecules=0,773 moles Ca(OH)_2* \frac{6,02* 10^{23} molecules Ca(OH)_2 }{1 mol Ca(OH)_2} \\ \\ =4,653 * 10^{23} molecules Ca(OH)_2[/tex]

Have a nice day!
From the Avogadro's  constant 1 mole of a substance contains 6.022 ×10^23 particles.
Therefore; 1 mole of Ca(OH)2  contains 6.022×10^23 molecules
Thus; 0.773 moles contains; 
    0.773 × 6.022 ×10^23 molecules 
 = 4.655 ×10^23 molecules

Enough of a monoprotic acid is dissolved in water to produce a 0.0121 M solution. The pH of the resulting solution is 6.49. Calculate the Ka for the acid.,

Answers

Calculate the H positive from the pH equation: pH equals -log (H positive). This would be 10 to the -6.49. Let's call the acid HA. To calculate Ka in this equation, Ka equals H positive times A- over HA. HA is going to be the 0 0121. So, Ka=(10^-6.49)^2/0.0121. This equals 1.05*10^-13/0.0121. Ka then equals 8.65*10^-12.

If 4.0 g of O2(g) and 4.0 g of He(g) are placed in a 5.0-L vessel at 65 °C, what will be the partial pressure of each gas and the total pressure in the vessel?,

Answers

Mass of O2 = 4 g, converting to moles = 4 g / 32 g/mol = 0.125 mol
Mass of He = 4 g, converting to moles = 4 g / 4 g/mol = 1 mol
Temperature T = 65 + 273 = 338
Volume of the vessel V = 5 L

Universal Gas constant R = 0.08206 L atm / mol K,Pressure by O2 in vessel P1 = nRT / V = 0.125 x 0.08206 x 338 / 5 = 0.69
atm
Pressure by He in vessel P2 = nRT / V = 1 x 0.08206 x 338 / 5 = 5.55 atmTotal pressure = 0.69 + 5.55 = 6.24 atm

The partial pressure of O₂ is 0.693 atm, the partial pressure of He is 5.55 atm, and the total pressure in the vessel is 6.24 atm.

The partial pressure of each gas and the total pressure in the vessel, we can use the ideal gas law, PV = nRT. We'll start by calculating the number of moles of each gas.

First, calculate moles of O₂ (molar mass = 32 g/mol): n(O2) = 4.0 g / 32 g/mol = 0.125 molesNext, calculate moles of He (molar mass = 4 g/mol): n(He) = 4.0 g / 4 g/mol = 1.0 moles

Now use the ideal gas law to find the partial pressures. The universal gas constant (R) is 0.0821 L·atm/(mol·K) and the temperature (T) is 65 °C, which is 338 K.

Partial pressure of O₂: P(O₂) = (nRT) / V = (0.125 mol * 0.0821 L·atm/(mol·K) * 338 K) / 5.0 L = 0.693 atmPartial pressure of He: P(He) = (1.0 mol * 0.0821 L·atm/(mol·K) * 338 K) / 5.0 L = 5.55 atmTotal pressure is the sum of the partial pressures:

Total Pressure = P(O₂) + P(He) = 0.693 atm + 5.55 atm = 6.24 atm

Which state of matter has a constant volume, but changes shape?\?

Answers

Liquids stays the same volume but the bonds are spaced out enough that it can take the shape of whatever container it’s in.

All substances are composed of which type of matter?
a. ions
b. mixtures
c. elements
d. molecules

Answers

Answer is: all substances are composed of c. elements.
Elements are constitute of all of the ordinary matter of the universe. There are 118 chemical elements. Chemical element is a species of atoms having the same number of protons (atomic number) in their atomic nuclei. For example, water is made from elements oxygen and hydrogen.

2. If a liquid is sealed in a container and kept at constant temperature, how does its vapor pressure change over time? (1 point)
It continues to steadily increase.
It increases at first, then remains constant.
It increases at first, then decreases.
It continues to steadily decrease.,

Answers

The vapor pressure in the container will increase at first then remain constant. This is because pressure and vapor is generated by heat. Since the container is kept at a constant temperature the pressure changes accordingly to the temperature and will remain there unless released.

The answer to your question

B

I hope the answer to your question


Balance the following equation in acidic conditions. Phases are optional. Cu NO3,

Answers

If your equation is Cu+NO^- 3-->Cu^2+NO, then the answer is 
2 Cu + 1 NO3{-}  → 1 Cu^{2+} + 3 NO 

To check if it is balance, this is the solution:
2- Cu- 2
3- N -3
3- O -3 

The final balanced equation is 3Cu(s) + 2HNO₃(aq) + 6H⁺(aq) → 3Cu²⁺(aq) + 2NO(g) + 4H₂O(l).

To balance the redox reaction of copper with nitric acid in acidic conditions, we need to write separate half-reactions for oxidation and reduction, balance them for mass and charge, and then combine them into a balanced overall equation. The oxidation half-reaction involves copper turning into copper(II) ions:

oxidation:
Cu(s) → Cu²⁺ (aq) + 2e⁻

For the reduction half-reaction, nitric acid is reduced to nitrogen monoxide:

reduction:
HNO₃(aq) + 3e⁻ → NO(g) + H₂O(l)

Now we multiply each half-reaction by a number that will balance the electrons lost in oxidation with the electrons gained in reduction. For this equation, we multiply the oxidation half-reaction by 3 and the reduction half-reaction by 2:

3Cu(s) - 3Cu²⁺ (aq) + 6e⁻
2HNO₃(aq) + 6e⁻ - 2NO(g) + 2H₂O(l)

Now we combine the half-reactions and add 6H⁺ to balance the hydrogen:

3Cu(s) + 2HNO₃(aq) + 6H⁺ (aq)
ightarrow 3Cu²⁺ (aq) + 2NO(g) + 4H₂O(l)

This equation represents the balanced redox reaction in acidic solution between solid copper and nitric acid to produce aqueous copper(II) ions and nitrogen monoxide gas.

The complete question is:

Balance the following equation in acidic conditions. Phases are optional.

Cu+NO3- = Cu2+ NO

(redox and Oxidation reactions)

One mole of copper(ii) sulfate, cuso4, contains ________ o atoms.

Answers

Final answer:

One mole of copper(II) sulfate, CuSO4, contains 6.022 x 10^23 atoms.

Explanation:

One mole of copper(II) sulfate, CuSO4, contains 6.022 x 1023 atoms. This can be determined using Avogadro's number, which states that one mole of any substance contains 6.022 x 1023 atoms or molecules. Therefore, in one mole of copper(II) sulfate, there would be 6.022 x 1023 copper atoms, 6.022 x 1023 sulfur atoms, and 24.088 x 1023 oxygen atoms.

Learn more about Copper(II) sulfate and atomic mass here:

https://brainly.com/question/35437357

#SPJ12

Final answer:

One mole of copper(II) sulfate contains four moles of oxygen atoms. Using Avogadro's number, it translates to approximately 2.4088 x 10^24 oxygen atoms.

Explanation:

The question asks for the number of oxygen atoms present in one mole of copper(II) sulfate (CuSO4). Copper sulfate contains one copper atom (Cu), one sulfur atom (S), and four oxygen atoms (O). Hence, one mole of copper(II) sulfate would contain four moles of oxygen atoms.

Using Avogadro's number, which states there are 6.022 x 10^23 entities (such as atoms) in one mole, we can say that one mole of copper(II) sulfate contains 4 times 6.022 x 10^23 oxygen atoms, which is approximately 2.4088 x 10^24 oxygen atoms.

Learn more about Moles and Avogadro's Number here:

https://brainly.com/question/24175158

#SPJ2

Thermal energy is the energy associated with..

electric fields.
being stored in chemical bonds.
the pull of gravity.
temperature.

@aaronq,

Answers

Thermal energy is the internal energy that is stored within the system. It is also called internal energy and implies that it is the form of energy that is transferable within systems. Thermal energy can be create from different variety of actions which may include drag or even friction which generates heat and thus energy. Every transfer of heat generates a delta temperature that can easily be pointed as thermal energy and thus it plays to ensure the conservation of energy.

Answer:

D. Temperature

Explanation:

This is the correct answer on edge.

What is the concentration of the base (NaOH) in the following titration?
A) 3.0 M
B) 142.2 M
C) 3.79 M
D) 3.86 M

Answers

Most likely C. 3.79, but if not im 100% sure its D. 3.86

Answer: D: 3.86

Explanation:

PLEASE HELP!!!!!!!!!!!!!
Which ideas did you include in your answer? Check all that apply.
A is the activation energy.
B is the activated complex.
C is the enthalpy of reaction.
D is the energy of the products.
E is the energy of the reactants.
F is the reactants, Q + R.
G is the products, N + M.
The reaction is exothermic, because the energy of the reactants is greater than the energy of the products.

Answers

I think the answer is A,B,D,E hope it helps god bless you :)
Final answer:

In an exothermic reaction, the energy of the reactants is higher than that of the products, signifying that energy is released. The activation energy is the difference between the energy of the reactants and the activated complex, and the enthalpy of reaction is the heat content change indicating if the reaction is exothermic or endothermic.

Explanation:

To determine whether a reaction is exothermic or endothermic, we can analyze the enthalpy change (ΔH). If ΔH is less than zero (ΔH < 0), this indicates that the reaction is exothermic. In an exothermic reaction, the energy of the reactants is higher than that of the products, and energy is released in the form of heat or light.

To calculate the activation energy (A), which is the minimum energy required to start a reaction, we consider the energy difference between the reactants (E) and the activated complex (B), also known as the transition state.

The enthalpy of reaction (C) represents the heat content change from reactants to products. In cases where the products (G) have lower energy than the reactants (F), the reaction is indeed exothermic. Therefore, in your answer, you should include ideas that reflect the concepts of activation energy, activated complex, enthalpy of reaction, energy of the reactants, and energy of the products to explain why the reaction is exothermic.

Determine the ph at the equivalence (stoichiometric) point in the titration of 32 ml

Answers

i don't the answer sorry

list the 7 diatomic molecules

Answers

The 7 diatomic molecules are Iodine, Bromine, Chlorine, Fluorine, Oxygen, Nitrogen, and Hydrogen.

Answer is: nitrogen(N₂), oxygen(O₂), hydrogen(H₂), carbon monoxide(CO), calcium oxide(CaO), hydrogen chloride(HCl), sodium hydride(NaH).

Diatomic molecules are molecules made of two atoms.

They can be homonuclear (molecule made of two atoms of the same element) and heteronuclear (molecule made of two different atoms).

#1: Which type of substance is an electron-pair donor?

A. Arrhenius acid

B. Brønsted-Lowry base

C. Brønsted-Lowry acid

D. Lewis base

***I'm not sure on this one.. :( what do you think? @aaronq :)

Answers

Answer is: D. Lewis base.
Lewis acid is a chemical element, molecule or ion that contains an empty orbital which is capable of accepting an electron pair from a Lewis base. A Lewis base is element, molecule or ion that has a filled orbital and has electron pair which is not involved in bonding and can give it to Lewis acid. Lewis base is for example ammonia (NH3).

this seems like a complicated one. can someone help me with this question?

If the pH of a 1.00-in. rainfall over 1400miles2 is 3.60, how many kilograms of sulfuric acid, H2SO4, are present, assuming that it is the only acid contributing to the pH?
For sulfuric acid, Ka1 is very large and Ka2 is 0.012.

Answers

[H+] [SO4--] / [HSO4-] = Ka2 

At pH 3.2,
[SO4--] / [HSO4-] = Ka2 / 10^-3.2
= 19 

All of the H2SO4 is negatively charged already, so
the total amount of sulfuric acid is:
[SO4--] + [HSO4-] = 19 [HSO4-] + [HSO4-]
=20 [HSO4-] 

Proportion of the pH level to the H2SO4 that is negatively charged is:
19 [SO4--] / 20 [HSO4-]
= 19/20 

 proportion that is in a single deprotonation is:
[HSO4-] / 20 [HSO4-]
= 1/20 

The moles of hydrogen ion per mole of sulfuric acid at this pH is 
(19/20)*2 + (1/20)*1
= 39/20 

The amount of sulfuric acid is:

[H+] (1 mol sulfuric acid / 39/20 mol H+)
= (20/39) 10^-3.2 mol/L 
=0.51 x 10^-3.2 mol/L 

Your boss tells you that she needs a decision by the end of the day about the machine you want to purchase for your new operation. You have four options, and your boss reminds you to be as cost-efficient as possible but that she also wants the best efficiency. Which is your best option?
Option 1: This $5,000 machine is supplied energy at a rate of 1,900 W and does useful work at a rate of 1,786 W.
Option 2: This $4,500 machine is supplied energy at a rate of 1,450 W and does useful work at a rate of 1,300 W.
Option 3: This $4,750 machine is supplied energy at a rate of 1950 W and does useful work at a rate of 1833 W.
Option 4: This $4,750 machine is supplied energy at a rate of 2,000 W and does useful work at a rate of 1,822 W.

A. Option 1 B. Option 2
C. Option 3 D. Option 4

Answers

Option 1 : 1900 - 1786 = 114

Option 2 : 1450 - 1300 = 150

Option 3: 1950 - 1833 = 117

Option 4: 2000 - 1822 = 178


Option 1 has the lowest energy rate so ver time would be the best deal.

Answer:

Option (I) has the lowest energy rate so that would be best option.

Explanation:

(I). Given that,

Input energy = 1900 W

Output energy = 1786 W

We calculate the loss of energy

Using formula of loss of energy

[tex]E_{loss}= E_{in} - E_{out}[/tex]

Put the value into the formula

[tex]E_{loss}=1900-1786= 114\ W[/tex]

(II). Given that,

Input energy = 1450 W

Output energy = 1300 W

We calculate the loss of energy

[tex]E_{loss}=1450-1300= 150\ W[/tex]

(III). Given that,

Input energy = 1950 W

Output energy = 1833 W

We calculate the loss of energy

[tex]E_{loss}=1950-1833= 117\ W[/tex]

(IV). Given that,

Input energy = 2000 W

Output energy = 1822 W

We calculate the loss of energy

[tex]E_{loss}=2000-1822= 178\ W[/tex]

Hence, Option (I) has the lowest energy rate so that would be best option.

Summarize the difference between legal law and scientific law

Answers

Scientific law is based on answers that are a result of experimentation, number of repetitive tests (to ensure credible results), and observations about Earth's atmosphere and it's life

Legal law is based from morale and principle high ground that are designed to bring order through an armed force. If you look at it very carefully, it's designed to control human nature, savagery, and instinctual behaviour. How so? Without order, everything morphs into chaos as people have the liberty to fight, kill, and steal without penalization.

Answer:

Legal laws are passed by lawmakers in a democratic process that accounts for people's opinions and beliefs.

Scientific laws are discovered and tested by experiments.

Legal laws can be changed if people change their minds.

Legal laws may have exceptions.

on edg

Explanation:

What is the relationship among cells, chromosomes, genes, and DNA?
A. DNA is a double helix structure found in the nucleus. Chromosomes straighten out the DNA so the code can be read by genes.

B. Cells contain chromosomes which are made up of genes. Genes are made up of tightly wound strands of DNA.

C. Chromosomes are tightly wound strands of DNA located in cells. Genes are sections of DNA.

D. Tightly wound strands of chromosomes contain genes and are found in cells. The genes we coded sequences nucleotide read by DNA.

Answers

B. Cells contain chromosomes which are made up of genes. Genes are made up of tightly wound strands of DNA.
answer is B........................

The helium flash converts helium to the heavier element _____.

Answers

The helium flash converts helium to the heavier element carbon.
Final answer:

The helium flash, a nearly explosive ignition in a red giant star's core, converts helium into carbon through the triple-alpha process. This marks a crucial step in stellar evolution involving the production of heavier elements. Recognized by two protons in its nucleus, helium exists as the second most abundant element in the universe.

Explanation:

The helium flash refers to a nearly explosive ignition of helium as a part of the triple-alpha process in the dense core of a red giant star. During the helium flash, helium (a lighter element) is converted into a heavier element, specifically, carbon. Managed through a sequence called the triple-alpha process, three helium-4 nuclei combine to form a carbon-12 nucleus.

The process of forming helium from hydrogen involves addition of another proton to create the helium nucleus, emitting significant energy. As a part of stellar evolution, the complete exhaustion of helium in the core leads to the production of heavier elements like oxygen, neon, and magnesium, by the fusion of carbon.

For context, helium is the second-most abundant element in the universe, discovered in 1868, and is defined by its two protons within the nucleus. This element is most commonly known as the light gas used to inflate balloons.

Learn more about Helium Flash here:

https://brainly.com/question/10195637

#SPJ12

Other Questions
if a + b = -5 and x + y = -5, what is 6y + 6x - b - a *20 Pts* What are two fractions with different denominators that each have the LCD of 36? Five years ago, Tims mom was three times Tims age today. Now their combined ages are 45. How old is Tims mom today? Which is the best definition of a square? A. a 4-sided polygon with all sides equal B. a parallelogram with all sides equal and all angles equal C. a combination of a rectangle and a trapezoid D. a 4-sided polygon with all angles equal Mark has 36 drawings of horses and 4 drawings of spaceships. write and solve an equation to find how many times as many drawings of horses he has as spaceships. qu impacto tiene el desarrollo cientifico y tecnologico en nuestras vidas? This image shows the Great Sphinx. During which era was it constructed? during the Old Kingdom during the Middle Kingdom during the reign of the Hyksos during the New Kingdom A genetic mutation occurs in a rabbit's muscle cell. This genetic mutation will be passed on to A. the cells of the rabbit's offspring. B. cells that are produced when the mutant cell divides. C. the cells that are next to the mutant muscle cell. D. the existing cells in the rabbit's body. Can someone help me with this question? Paul has been forced to retire from his company after over 30 years of employment. compared with his peers who voluntarily retired, he is more likely to be: what is the product? (x-5)(2x+3x-1) What is the difference between NAD+ and NADH It is the obligation of researchers to review and comment on the research of other researchers.True or false WILL GIVE BRAINLIESTwhat are the 5 basic rules of SOFTBALL?what is softball? A mixture made of two or more elements, at least one of which is a metal, is called a(n) Suppose you invest $500 at an annual interest rate of 8.2% compounded continuously. How much will you have in the account after 15 years? (1 point) $1,671.74 $17,028.75 $1,710.61 $8,140.92 Dax purchased only one asset during the current year. it placed in service equipment (7-year property) on september 10 with a basis of $40,000. calculate the maximum depreciation expense (ignoring any 179 or bonus depreciation If a horses man grows 6/5 per month, how long will it take to grow 24/10 cm In the united states today 8 of the top 10 occupations are directly related to How many ways are there to pick 8 balls from large piles of (identical) red, white, and blue balls plus 1 pink ball, 1 lavender ball, and 1 tan ball?