pls help me solve this physics question​

Sitting for long hours without any interruption may cause painful neck, swayed back in the long run and sometimes disc damage.

Explanation:

Human bodies are designed to stand upright. Cardiovascular and bowel functions work effectively in that way.  Sitting too long may weaken and deplete large leg and gluteal muscles which are significant in walking and stabilizing the body.

It also causes stress and reduced social skills. It can also lead to serious health hazards such as cardiovascular complications, diabetes, imbalances in spinal structure. To avoid all these exercises, yoga, stretching regularly is mandatory.

All three of Newton's laws of motion, as well as his law of universal gravity, are involved in the explanation of orbits.

Answer:

I am pretty sure that the answer would be a peer reviewed article.

Explanation:

I saw this because, an encyclopedia, published scientific journal, and a lab journal used in the original experiment, are all reliable sources of information.

Answer:

A dictionary

Explanation:

did the quiz

Answer:

Balance forces are two forces acting in opposite directions on an object, and equal in size. Anytime there is a balanced force on an object, the object stays still or continues moving continues to move at the same speed and in the same direction.

Explanation:

pls thank me

Answer:

Balance forces are two forces acting in opposite directions on an object, and equal in size.

Answer:

They are changes in bonding energy between the molecules. If heat is coming into a substance during a phase change, then this energy is used to break the bonds between the molecules of the substance. ... At the moment of melting the average kinetic energy of the molecules does not change.

Explanation:

Answer:

0.900 mol/kg

Explanation:

Molality is moles of solute per kilograms of solvent.

Converting 54 grams of NaOH to moles:

54 g NaOH × (1 mol NaOH / 40.00 g NaOH) = 1.35 mol NaOH

So the molality is:

m = (1.35 mol) / (1.50 kg)

m = 0.900 mol/kg

Convert grams of NaOH to moles:

The formula to convert grams to moles is:[tex]\text{moles of NaOH} = \frac{\text{mass of NaOH (g)}}{\text{molar mass of NaOH (g/mol)}}[/tex]

Given that the mass of NaOH is 54 grams and its molar mass is 40.00 g/mol:

[tex]\text{moles of NaOH} = \frac{54 \text{ g}}{40.00 \text{ g/mol}} = 1.35 \text{ moles}[/tex]

Determine the mass of the solvent (water):

The mass of water is given as 1.50 kg.

Convert this mass into kilograms (if necessary):

Since 1.50 kg is already in the correct unit, no conversion is needed here.

Calculate molality (m):

The formula for molality is:

[tex]\text{molality (m)} = \frac{\text{moles of solute}}{\text{mass of solvent (kg)}}[/tex]

Substitute the values into the formula:

[tex]\text{molality} = \frac{1.35 \text{ moles}}{1.50 \text{ kg}} = 0.90 \text{ m}[/tex]

Answer:

A bow is drawn back from its equilibrium position.

A spring toy dart gun is loaded with a dart.

A bungee cord is stretched with a person at the end.

Explanation:

All of these examples have to do with the elastic object being stretched but not in motion, therefore they have stored energy, or potential energy.

Answer:

A bow is drawn back from its equilibrium position.

A spring toy dart gun is loaded with a dart.

A bungee cord is connected to a tall tower.

A bungee cord is stretched with a person at the end.

Explanation:

Potential energy is defined as the energy a material posesses by it viture of position. elastic potential potential energy is a special case of potential  energy which is defined as the potential energy that is stored in material that are elastic. Elastic is connected with stretching and so looking at the options , option 2 and 4 are out of the lists

Answer:

keep it and use it in similar assignments

Explanation:

A personal strategy card is a form of student assessment where teachers can look at the learning process of the student and get a feedback on the next learning step to be taken by the student.

The card can a sections are;

This information is important because it can be used as a study guide on other similar assignments .

Answer:

your mass is the same in the moon as on earth

Explanation:

on the monn there is less gravity than in the earth gravity determines the weight of an object but it can't change mass as mass is the amount of contents inside with out gravity

Final answer:

C) Your mass remains the same on the Moon as it is on Earth because mass is a measure of the amount of matter and does not change with location. However, your weight would be less on the Moon due to the weaker gravitational force compared to Earth's gravity.

Explanation:

When it comes to your mass on the Moon compared to your mass on Earth, your mass stays exactly the same in both locations. This is because mass is a measure of the amount of matter in an object, which does not change with location. On the other hand, weight is the force exerted on your mass by gravity, and this force does vary with location due to differences in gravitational pull.

Since the gravitational acceleration on the Moon is only about 1.625 m/s², compared to Earth's 9.80 m/s², your weight on the Moon would be significantly less than your weight on Earth, even though your mass remains unchanged. Therefore, if you were to scale, you would see a lower number on the Moon. Remember that while dieting might reduce your mass, simply stepping onto the Moon's surface only affects your weight, not your mass!

To conclude, the correct answer is:C) Your mass is the same on the Moon and Earth

Answer:

36 km

Explanation:

Answer:

36

Explanation:

Answer:

6

Explanation:

Answer: the answer is air gradient

Explanation:

Answer:

97% will sink below the water

Explanation:

Waters density is 1 g/cm3

If an object's density is greater than 1g/cm3, it will sink. If it's less then it would float. 1-0.97 = 0.03. Only 3% of the ice would show while 97 will be under.

Answer:

About 97 percent of the ice will sink below water.

Explanation:

Let the volume that is submerged into the water is given as V1

so at equilibrium condition we can say that buoyancy force on it is balanced by weight of the block

so we have

[tex]\pho_{water} V_1 g = \rho_{ice} V g[/tex]

now we have

[tex]\frac{V_1}{V} = \frac{\rho_{ice}}{\rho_{water}}[/tex]

[tex]\frac{V_1}{V} = \frac{0.97}{1}[/tex]

so the percentage of block that is submerged into the water is given as

volume percent submerged = 97 %

Answer:

Lavoisier

Explanation:

The experiment confirmed the initial hypothesis, supported by specific data points. Some difficulties encountered during the process could have affected the results. The findings of the experiment align with two real-world examples.

In the experiment we conducted, we intended to test a specific hypothesis. After careful analysis of the obtained data, the results did indicate that our hypothesis was indeed correct. Observations and specific data points derived from the experiment including (insert statistical or observational evidence) clearly supports this conclusion.

The experiment was not without difficulties. Some of the issues encountered include (insert specific problems or difficulties), which might have affected some of our findings. Two real-world applications of our findings would be (insert example one) and (insert example two). These applications provide practical illustrations on why these findings contribute relevant information to our broader understanding the subject matter.

https://brainly.com/question/32446474

#SPJ2

Answer: 2.54 s

Explanation:

If we are talking about a constant acceleration, we can use the following equation:

[tex]V_{f}=V_{o}+2at[/tex]

Where:

[tex]V_{f}=28 m/s[/tex] is the final velocity of the car

[tex]V_{o}=0t[/tex] is the finitial velocity of the car (it started from rest)

[tex]a=5.5 m/s^{2}[/tex] is the constant acceleration of the car

[tex]t[/tex] is the time it takes to reach [tex]V_{f}[/tex] with the given constant velocity

Hence:

[tex]V_{f}=2at[/tex]

Clearing [tex]t[/tex]:

[tex]t=\frac{V_{f}}{2a}[/tex]

[tex]t=\frac{28 m/s}{2a(5.5 m/s^{2})}[/tex]

Finally:

[tex]t=2.54 s[/tex]

Final answer:

It takes approximately 5.09 seconds for the car to accelerate from rest to a velocity of 28 m/s with a constant acceleration of 5.5 m/s².

Explanation:

To determine the time it takes for a car to reach a certain velocity with a given acceleration from rest, we use the kinematic equation:

final velocity (v) = initial velocity (u) + acceleration (a) × time (t)

Given that the car starts from rest, the initial velocity u is 0 m/s. We are told the car accelerates at a constant rate of 5.5 m/s2 and we want to find the time when the car reaches a velocity of 28 m/s. Plugging in the values we have:

28 m/s = 0 m/s + (5.5 m/s2) × t

Solving for t, we get:

t = 28 m/s / 5.5 m/s2

t = 5.09 seconds (approximately).

So, it takes approximately 5.09 seconds for the car to accelerate from rest to 28 m/s at a constant acceleration of 5.5 m/s2.

Answer:

Issac Newton!

Explanation:

Hope this helps.

Answer: Isaac Newton

Explanation:

Isaac NewtonThe three laws of motion were first compiled by Isaac Newton in his Philosophiæ Naturalis Principia Mathematica (Mathematical Principles of Natural Philosophy), first published in 1687. Newtonused them to explain and investigate the motion of many physical objects and systems.Feb 21, 2017

Answer:

I think it's D) Guess why? I searched it up!

Answer:

period

Explanation:

Answer:

The time required for one cycle, a complete motion that returns to its starting point, is called the period .

Explanation:

Any motion that repeats at regular time intervals is called periodic motion. This kind a motion has some characteristics like the period. Other important characteristic is the frequency, which is the number of complete cycles in a given time, that is, the inverse of the period.

The correct option that determines gravitational pull is mass. Gravitational force is calculated using the masses of objects and the gravitational constant, with the formula F = mg close to the Earth's surface.

Gravitational pull and Influencing Factors

The option that determines gravitational pull is mass. According to Newton's Law of Gravity, anything that has mass attracts everything else that has mass. The gravitational force (F) between two objects can be determined by the equation F = G(M1M2)/r^2, where G is the gravitational constant, M1 and M2 are the masses of the objects, and r is the distance between the centers of the two objects. The force of gravity on an object near the Earth's surface is calculated as the mass of the object (m) multiplied by the acceleration due to gravity (g), which is F = mg.

Volume does not directly determine gravitational pull; rather, it is the total quantity of matter, or mass, within that volume that contributes to gravity. The acceleration due to gravity remains constant (g = 9.81 m/s^2 near the Earth's surface) regardless of the object's mass. While the force of gravity is relatively weak, it is sufficient to keep the planets in orbit around the sun, as demonstrated in Newton's Universal Law of Gravitation.

a) C. 9 m/s

First of all, let's calculate the difference in height between the starting point of the motion and the end point of the first section. It is given by:

[tex]\Delta h = L sin \theta[/tex]

where

L = 6.0 m

[tex]\theta=45^{\circ}[/tex]

Substituting,

[tex]\Delta h = (6.0)(sin 45^{\circ})=4.2 m[/tex]

Assuming the rider starts from rest, its initial speed is zero. For the law of conservation of energy, the decrease in gravitational potential energy of the rider will be equal to its gain in kinetic energy, so we can write:

[tex]mg\Delta h = \frac{1}{2}mv^2[/tex]

where m is the rider's mass, g = 9.8 m/s^2 is the acceleration of gravity, and v is the speed at the end of the first section. Solving for v, we find:

[tex]v=\sqrt{2g\Delta h}=\sqrt{2(9.8)(4.2)}=9.1 m/s \sim 9 m/s[/tex]

b) B. Increase the radius of the circular segment

In fact, the acceleration during the second section of the motion (circular motion) is given by the formula for the centripetal acceleration:

[tex]a=\frac{v^2}{r}[/tex]

where

v is the speed at the end of the first section

r is the radius of the circle

We notice that the acceleration is

- Proportional to the square of the speed

- Inversely proportional to the radius

So, we immediately see that if we increase the radius of the circle (choice B), the acceleration will decrease.

c) B. 3.4 m/s

When the rider exits the second section of the motion, he has a speed (completely horizontal) of 9.1 m/s (calculated in part (a); it didn't change, because the speed during the second section does not change).

The vertical component of his velocity is instead zero, since his motion is completely horizontal. Therefore, we can use the following SUVAT equation along the vertical direction:

[tex]v_y^2 - u_y^2 = 2g\Delta h[/tex]

where

[tex]v_y[/tex] is the vertical component of the velocity as the rider hits the water

[tex]u_y=0[/tex] is the vertical component of the velocity as the rider starts the 3rd section

[tex]\Delta h = 0.60 m[/tex] is the difference in height

Solving for [tex]v_y[/tex],

[tex]v_y = \sqrt{2g\Delta h}=\sqrt{2(9.8)(0.60)}=3.4 m/s[/tex]

d) C. 2.4 m

We want here the rider to land twice as far compared to before.

The horizontal distance travelled by the rider in section 3 is entirely determined by his horizontal motion. The horizontal component of the velocity, which is constant, is

[tex]v_x = 9.1 m/s[/tex]

calculated at part (a) and remained unchanged during section 2. The horizontal distance travelled during section 3 is

[tex]d=v_x t[/tex] (1)

where t is the time of the fall. This can be rewritten as

[tex]t=\frac{d}{v_x}[/tex]

We also know that the vertical displacement is:

[tex]h=\frac{1}{2}gt^2[/tex]

Substituting t from (1) into this equation, we find

[tex]h=\frac{gd^2}{2v_x^2}[/tex]

So we see that the height needed is proportional to the square of the distance: [tex]h \propto d^2[/tex]. Therefore, in order to land at twice the previous distance, the height must be 4 times the previous one, so:

[tex]h=4 (0.6 m)=2.4 m[/tex]

e) B. The second

We need to calculate the acceleration in each section.

In section 1 (motion along the slope), it is:

[tex]a=g sin \theta = (9.8)(sin 45^{\circ})=6.9 m/s^2[/tex]

In section 2 (circular motion), the acceleration is the centripetal acceleration:

[tex]a=\frac{v^2}{r}=\frac{9.1^2}{1.5}=55.2 m/s^2[/tex]

In section 3, the motion is free fall, so the acceleration is equal to the acceleration of gravity:

[tex]a=g=9.8 m/s^2[/tex]

Therefore, the rider experiences the largest acceleration in section 2.

This answer explains how to calculate the speed, acceleration, and vertical component of velocity for a rider on a water slide, as well as how to adjust the height to change the landing distance and determine the section with the greatest acceleration.

To answer these questions about the rider on the water slide, we need to use the formula for acceleration in circular motion, which is a = v2/r. For question a, we can use the given information to calculate the speed at the end of the first section of motion. For question b, reducing the radius of the circular segment would decrease the acceleration during the second section. For question c, we need to calculate the vertical component of the rider's velocity as he hits the water. For question d, we can use the concept of projectile motion to determine the necessary height above the water to land twice as far away. Finally, for question e, we need to determine during which section of the motion the magnitude of the acceleration experienced by the rider is the greatest.

https://brainly.com/question/32123193

#SPJ11

The answer is D: The total number of protons and neutrons is 15.

The atomic mass of an atom is the total mass of its protons and neutrons. Protons have a mass of 1 amu, and neutrons have a mass of 1 amu. Therefore, if an atom has an atomic mass of 15 amu, then it must have 15 protons and 15 neutrons.

A: There are 15 protons. This is not necessarily true. The atomic number of an atom is the number of protons in its nucleus. The atomic number of an atom with an atomic mass of 15 could be 7 (nitrogen), 8 (oxygen), or 9 (fluorine).

B: There are 15 electrons. This is not necessarily true. The number of electrons in an atom is equal to the number of protons in the atom's nucleus. However, the electrons can be arranged in different energy levels, so the number of electrons in the outermost energy level may not be equal to the number of protons.

C: The total number of protons and electrons is 15. This is not necessarily true. The number of protons in an atom is always equal to the number of electrons in the atom. However, the number of electrons in the outermost energy level may not be equal to the number of protons.

D: The total number of protons and neutrons is 15. This is always true. The atomic mass of an atom is the total mass of its protons and neutrons. Therefore, if an atom has an atomic mass of 15 amu, then it must have 15 protons and 15 neutrons.

To learn more about protons, here

https://brainly.com/question/12535409

#SPJ3

From hide-out toward prey:

Speed = 18 km/hr=5 m/s. ... Time = 2.5 sec. ... Distance= s*t = 12.5 meters

From turn-around back to hide-out:

Distance = 12.5 m. ... Time = 12.0 sec

Average speed = (total distance covered) / (time to cover the distanced)

total distance = (12.5 + 12.5) = 25 meters

total time = (2.5 + 12.0) = 14.5 sec

Average speed = (25 m) / (14.5 sec) = 1.72 m/s

Average velocity = displacement / time

The creature ended up where it started, so its displacement is zero.

Average velocity = ( 0 / 14.5 sec )

Average velocity = zero

The snake then turns around and slowly returns to its hide-out in 12.0 s, mamba's average velocity for the complete trip is approximately 1.72 m/s.

By taking into account both the mamba's initial speed towards the prey and its subsequent motion back to the hiding place, the average velocity of the entire journey can be computed.

First, let's convert the velocities to meters per second (m/s):

[tex]\[ \text{Initial velocity} = 18.0 \, \text{km/h} \\\\= \frac{18.0 \times 1000}{3600} \, \text{m/s}\\\\ \approx 5.0 \, \text{m/s} \][/tex]

The distance traveled towards the prey can be calculated using the formula [tex]\( \text{Distance} = \text{Velocity} \times \text{Time} \)[/tex]:

[tex]\[ \text{Distance towards prey} = 5.0 \, \text{m/s} \times 2.50 \, \text{s} \\\\= 12.5 \, \text{m} \][/tex]

The distance traveled back to the hide-out is the same as the distance towards the prey:

[tex]\[ \text{Distance back to hide-out} = 12.5 \, \text{m} \][/tex]

The total distance traveled for the complete trip is twice the distance towards the prey:

[tex]\[ \text{Total distance} = 2 \times 12.5 \, \text{m} \\\\= 25.0 \, \text{m} \][/tex]

The total time taken for the complete trip is the sum of the time towards the prey and the time back to the hide-out:

[tex]\[ \text{Total time} = 2.50 \, \text{s} + 12.0 \, \text{s} \\\\= 14.5 \, \text{s} \][/tex]

[tex]\[ \text{Average velocity} = \frac{25.0 \, \text{m}}{14.5 \, \text{s}}\\\\ \approx 1.72 \, \text{m/s} \][/tex]

Thus, the mamba's average velocity for the complete trip is approximately [tex]\(1.72 \, \text{m/s}\)[/tex].

For more details regarding velocity, visit:

https://brainly.com/question/34025828

#SPJ3

1.

Answer:

m = 74.9 kg

Explanation:

As we know that weight of the object is force due to gravity

Now we know that

[tex]F_g = mg[/tex]

[tex]m = \frac{F_g}{g}[/tex]

[tex]m = \frac{735}{9.81}[/tex]

[tex]m = 74.9 kg[/tex]

2.

Answer:

[tex]s = 450 J/kg ^oC[/tex]

Explanation:

Heat added to the system is given as

[tex]Q = ms\Delta T[/tex]

so we will have

[tex]337500 = 50 s (15)[/tex]

[tex]s = 450 J/kg ^oC[/tex]

3.

Answer:

Velocity will increase while acceleration will remain constant

Explanation:

When skydiver falls from rest then velocity will increase with time while the acceleration due to gravity will remains constant.

So here we can say that

[tex]a = 9.81 m/s^2[/tex]

while velocity will increase while it falls from certain height

Answer:

reservoir.     C

Explanation:

Just took the test on edge 2020

A large natural or human-made lake used to supply water is a reservoir.

A reservoir is a large area of land or even a container where things especially water is stored for future use.

A reservoir of water can be natural or man-made.

It is usually found underground or on the surface.

Therefore, a large natural or human-made lake used to supply water is a reservoir.

Learn more about reservoir at: https://brainly.com/question/12725067

Answer:

2.9

Explanation:

9.7 / 3.33 = 2.912912912...

We need to round to the correct number of significant figures.  9.7 has two significant figures, and 3.33 has three significant figures.  We need to round to the least number of significant figures available, so we round to two.

2.91 ≈ 2.9

Answer: Ionization energy is the amount of energy necessary to remove an electron from an atom

Explanation:

Ionization consists of the production of ions, which are electrically charged atoms or molecules due to the excess or lack of electrons with respect to a neutral atom or molecule.

In this sense, ionization energy is the energy necessary to separate (remove) an electron from a gaseous atom, isolated and in a fundamental state. This is because electrons are strongly attracted to the nucleus and it is necessary to provide energy to separate them. However, where the atom always loses electrons is in the last layer, which is where the weakest electrons are attracted to the nucleus.

Answer:

50.0 m

Explanation:

First of all, we can find the initial velocity of the ball, using the equation

v = u + at

where

v = 0 is the velocity of the ball at the highest position

u is the initial velocity

[tex]a=g=-9.8 m/s^2[/tex] is the acceleration of gravity

[tex]t=\frac{6.37}{2}=3.19 s[/tex] is the time the ball took to reach the maximum height (half of the time it remained in the air)

Solving for u,

[tex]u=v-at=0-(-9.8)(3.19)=31.3 m/s[/tex]

Now we can find the maximum height using the other SUVAT equation:

[tex]v^2-u^2 = 2ad[/tex]

where d is the maximum height. Solving for d,

[tex]d=\frac{v^2-u^2}{2a}=\frac{0^2-(31.3)^2}{2(-9.8)}=50.0 m[/tex]

The elasticity in solids is primarily due to covalent bonds. These bonds allow atoms to move slightly and then return to their original positions. Other types of bonds such as ionic and hydrogen can also contribute, but typically covalent bonds are the main factor.

The chemical phenomenon that accounts for the elasticity seen in solids is primarily due to covalent bonds.

These bonds hold the atoms together in the solid and allow them to move slightly and then return to their original positions. Other bonds like ionic and hydrogen bonds can also contribute to some extent, but typically, covalent bonds play the largest role. If a force is applied to a solid, it can stretch or deform, but it will return to its original shape when the force is removed because of the elasticity provided by these bonds.

https://brainly.com/question/35874265

#SPJ3

Answer:

Kinetic energy is energy in motion so therefor if you increase the velocity or in your case speed the kinetic energy also has to increase

Explanation:

Answer:

If the speed of a motorbike increases, its kinetic energy will also increase.

Explanation:

Kinetic energy is the energy an object has due to its motion, and it is a function of the mass and velocity of the object:

[tex]E_{k}=\frac{m*v^{2}}{2}[/tex]

From the expression, it is easy do identify a quadratic relation between kinetic energy and velocity. Therefore, if the speed of a motorbike increases, its kinetic energy will also increase.

For example, if you increase the speed of a motorbike by 10 times, and since mass is a constant value, the kinetic energy will increase by 100 times.