sandstone
Quartzite is formed when quartz-rich sandstone is altered by the heat and pressure.
What factors would occur if the sea level was to increase, rather than the temperature and the pressure change. This would be doing ancient times.
Answer:
Factors if the sea level is increased rather than the temperature and pressure.
Explanation:
If the sea level rises:
1. Coastal erosion would increase and disrupt the coastal vegetation and environment. Species that depend on this environment would suffer or migrate.
2. Dissolved carbon dioxide in oceans would increase that would affect the pH of the oceans and thus would disturb the marine ecosystem.
3. Wetlands would flood and this would damage the unique ecosystem thriving here as well.
4. Ground water near the new coast would get contaminated by saline water.
5. Migration patterns of birds could change.
Water’s high heat capacity allows the ocean water to be:
•• Cooler than the land around it.
•• Warmer than the land around it.
•• The same temperature as the land around it.
•• Sometimes warmer, sometimes cooler than the land around it.
Answer:
Water’s high heat capacity allows the ocean water to be:
Cooler than the land around it.
Explanation:
Water has high heat capacity of 4.18 J/g ° C , i.e. it consumes more amount heat to warm gram of water . water has the ability to absorb more heat. During warm summer day, the water temperature in the oceans does not change that much as compared to the land. Land on the other hand has much low heat capacity, so it is more warmer.
For this reason, the ocean takes a longer time to increase temperature whereas land will heat quickly. The air which is in contact with the oceans will be cooler. Therefore, the ocean water is cooler than the land around it.
An island arc forms where ____.
oceanic crust collides with continental crust
oceanic crust diverges from continental crust
continental crust collides with continental crust
continental crust diverges from continental crust
oceanic crust collides with oceanic crust
Answer:
oceanic crust diverges from continental crust
Explanation:
An island arc forms where oceanic crust diverges from continental crust.
An island arc forms where oceanic crust collides with oceanic crust. The collision leads to subduction, where the denser plate goes underneath the other. The subduction process causes volcanic activity that creates a chain of islands known as an island arc.
Explanation:An island arc refers to a string of volcanic islands that typically form in the ocean due to tectonic plate activities, specifically at subduction zones. These zones are areas where one tectonic plate is forced to dive or 'subduct' beneath another plate. An island arc specifically forms where oceanic crust collides with oceanic crust.
When this collision occurs, the denser of the two plates sinks beneath the other in the mantle, forming a deep-sea trench. The subducted crust then begins to melt due to the intense heat and pressure in the mantle. This melting generates magma, which rises to the surface and creates a chain of volcanoes. Over time, repeated volcanic eruptions lead to the emergence and growth of islands above the sea surface, hence forming an island arc.
Learn more about Island Arc here:https://brainly.com/question/36592675
#SPJ2
Describe two methods of slope stabilization
Answer:
some of soil stabilization technique is vegetation and terracing.
Explanation:
slope stabilization is a technique involved in stabilizing loose slope or deformed slope.
some of soil stabilization technique is vegetation and terracing.
In vegetation, plant roots help to hold the soil and reduce compaction and allow water to seep to deeper level.
In terrace, series of slope is provided rather than long continuous slope and allow water to move slowly over series of slope. thus prevent further soil erosion.
Question 22 (2 points) Which of the following is NOT one of the major causes of the loss of biodiversity? A) habitat loss B) invasive species C) radiation D) climate change E) overharvesting F) pollution
Answer:
maybe E) over harvesting
What is Faint Young Sun Paradox?
Research and write about these famous attraction 1. Disneyland 2. Disneyworld 3. Busch Gardens Tampa 4. Seaworld San Diego 5. Universal Studios Los Angeles
Answer:
1. Disneyland:
Disneyland(originally), now known as Disneyland park is located in Anaheim, California. It is one of the first theme park out of the the two theme parks built at Disneyland Resort on July 17, 1955.
Walt Disney, after visiting a lot of amusement parks with his daughter in 1930s and 1940s came up with this extra ordinary idea of that time and on an area of 160 acre the construction of Disneyland was started in 1954 and under the supervision of walt Disney it became the first theme park to be designed and completely built.
The park is the second most visited with 18.6 millions of visit. It includes New Orleans Square, Mickey's Toon Town, Star War Galaxy, Bear country, etc.
2. Disneyworld:
The Walt Disney World Resort Disneyworld is situated in Buena Vista, Florida in the United States. It was unveiled on October 1, 1971 and is looked after and operated by Disney Park, Experiences and Products, a Walt Disney Company, division.
It includes four theme parks- Magic Kingdom, Epcot, Disney's Hollywood Studio and Animal Kingdom. It is one of the most visited resort of the world with an annual average of more than 52 million visitors.
3. Busch Gardens Tampa:
It is situated in the city of Tampa, Florida. It is also known as Busch Gardens: The Dark Continent built on 335 acre of land. It is an African animal themed park and is the second most visited park. The has 2 water rides and 9 roller coaster rides apart from animal attractions.
4. Sea World San Diego:
It is located in San Diego, California and is a n animal theme park inside Mission Bay Park. It comprises of Marine Mammal Park, Oceanarium and and an outside aquarium.
It is a member of the Association of Zoos and Aquariums and is governed and operated by Seaworld Entertainment. Next to it is Hubbs Seaworld Research institute which carry researches on marine life and provides education and awareness regarding the same to general public.
5. Universal Studios Los Angeles:
Studio city is a neighborhood of the city of Los Angeles, California. It was named after the studio that came into existence due to film producer Mack Sennett in the year 1927. It is now known by the name of CBS studio Center.
The attractions like Disneyland, Disneyworld, Busch Gardens Tampa, Seaworld San Diego, and Universal Studios Los Angeles are major tourist destinations offering a range of experiences from rides to animal encounters and movie-themed entertainment.
Explanation:The attractions mentioned, such as Disneyland, Disneyworld, Busch Gardens Tampa, Seaworld San Diego, and Universal Studios Los Angeles, are all major tourist destinations known for their unique entertainment offerings. These theme parks utilize a variety of strategies to entice visitors, including thrilling rides, family-friendly environments, and educational experiences.
Disneyland and Disneyworld are perhaps the most iconic, providing immersive experiences into diverse realms of fantasy and adventure. Busch Gardens Tampa offers a mix of roller coasters and exotic animal encounters, while Seaworld San Diego is known for marine life shows and conservation education. Universal Studios Los Angeles brings the magic of the movies to life with film-themed rides and attractions.
These destinations are designed to create memorable experiences that resonate personally with each visitor, with an emphasis on making sure that the attractions and the sense of place are the stars of any visit. As centers of amusement and entertainment, they stand as testaments to human creativity and a desire for escapism and adventure.
A disadvantage to the green revolution is that plant yields are generally similar to those with other methods of agriculture unless substantial amounts of commercial inorganic fertilizers are applied.
True
False
It is possible to use natural parasites to control pest species.
True
False
A K-selected species usually has a population size that is ____.
a.
variable, with boom and bust cycles
b.
unpredictable at any particular time
c.
unaffected by changes in limiting factors
d.
very stable but very low
e.
close to its carrying capacity
Ecological succession is generally a slow process.
True
False
What is the leading cause of death worldwide for people ages 15–49?
a.
Influenza
b.
E. coli infection
c.
AIDS
d.
Hepatitis
e.
Malaria
Answer:
given in explanation
Explanation:
1) false
in green revolution the use of high yielding crops were used which were pest resistant.
2) true
it is true that the parasites can be used to control pest species as there are many biological processes which is used to do it.
3) option d) i.e very stable but very low is right
K-selected species have longer life span and there offspring are also very less i.e they are stable and low.
4) true
because in ecological succession the change from original community being disturbed by the passage of time very gradually.
5) AIDS
AIDS is the leading cause of death world wide for people ages between 15 to 49.
Part A) How many hours of day light occur in New England on June 21 (near the start of Summer)?
Part B) How many hours of day light occur in New England on March 21 (near the start of Spring) and September 21 (near the start of Fall)?
Part C) For which months does the sun rise to the north of east?
Answer:
15 hours of day light for New England on June 21
march 21 - 12 hours
Sept 21 - approx 11 hours
Sept through Dec
Explanation:
Part A) Around 15 to 16 hours of daylight on June 21.
Part B) Approximately 12 hours of daylight on March 21 and September 21.
Part C) The sun rises to the north of east during May, June, and July.
Part A) On June 21 (near the start of Summer), New England experiences the longest daylight hours of the year due to the summer solstice. The exact number of daylight hours can vary slightly depending on the specific location within New England, but on average, New England can expect around 15 to 16 hours of daylight on this day.
Part B) On March 21 (near the start of Spring) and September 21 (near the start of Fall), New England experiences approximately 12 hours of daylight. These are the days of the vernal (spring) and autumnal equinoxes when day and night are roughly equal in length.
Part C) The sun rises to the north of east during the summer months in the Northern Hemisphere, particularly from late spring to early summer. So, the months when the sun rises to the north of east in New England would be May, June, and July.
explain best management practices for the disposal of material collected from control devices
Answer and Explanation:
the best thing which we can do for dealing with the material which are collected is to be recycled them into productive reuses.
the waste materials are productive as fine mineral byproducts from the combustion of fuels coal or wood. the treatment or scrubbing of fuel gases or the collection of fine particles from industrial processing .
where as it necessary to protect the environment conserve the top soil and prevent the disposal of fly ash it can be given to some construction or cement industry as it is an important gradients of cement.
particular matters which are which are settled in ponds may be used as waste water regulators
Why biodiversity is important? Defend the reason you have given
Answer: Biodiversity is important because it serves as the major purpose of the maintaining the climate on the earth
Explanation:Biodiversity is the combination of all the variety of life which are present on the earth and whole ecosystem as well. Therefore the species and living beings present in the ecosystem have a interdependence on each other
If suppose biodiversity is neglected then there will be a degradation in the amount of forest ecosystem which will directly increase the release of green house gases and there will be less number of plants and tress for absorbing them and thus damaging the environment and this will ultimately effect on the climatic conditions of earth.Thus,biodiversity is very important ans should be preserved.
The primary cause of Earth's seasons is:
Changes in atmospheric thickness
Varying orbital speed
Inclination of Earth's rotational axis
Varying distance from the Sun
Answer:
Varying distance from the Sun
Explanation:
The primary cause of Earth's seasons is varying distance from the Sun.
The primary cause of Earth's seasons is the inclination of Earth's rotational axis, which is tilted by about 23.5 degrees. This tilt leads to the unequal distribution of sunlight over the course of a year, creating seasonal changes, and not the Earth's varying distance from the Sun.
The Primary Cause of Earth's Seasons
The primary cause of Earth's seasons is the inclination of Earth's rotational axis. The axis is not perpendicular to the orbital plane; instead, it is tilted at an angle of approximately 23.5 degrees, which is known as Earth's obliquity. This tilt results in different parts of the Earth receiving varying amounts of sunlight throughout the year, which in turn creates the seasons.
During the Earth's orbit around the Sun, the Northern Hemisphere leans towards the Sun for part of the year, resulting in longer days, more direct sunlight, and hence, summer. In contrast, in the other part of the year, the Southern Hemisphere leans towards the Sun, leading to summer in the Southern Hemisphere and winter in the Northern Hemisphere. Therefore, it's not the changing distance from the Sun that causes seasons, since Earth's orbit only changes the distance from the Sun by about 3%, which is insufficient to explain the significant temperature changes associated with different seasons.
It is a common misconception that seasons are due to Earth's elliptical orbit around the Sun. In reality, both hemispheres experience opposite seasons simultaneously, which cannot be explained by the Earth-Sun distance model, but is explained by the Earth's axial tilt.
All of the following are true about the Mongolian Empire EXCEPT A) they feared taking their conquest overseas, and therefore never built a navy B) they used psychological warfare c) they allowed all major world religions a place in their court D) they issued bank notes to facilitate Silk Road trade
Answer:
All of the following are correct except a) they feared taking their conquest overseas,and therefore never built a navy
Explanation:
Mongolian empire was the second largest empire by land area. Under their leader Genghis Khan , the mongols enjoyed great success and at its peak controlled an area equal to the size of Africa.
Under Genghis khan's rule , people were given the permission to practice any religion they want, so therefore we can say that option c) is definitely true.
Under Genghis Khan's rule trade was also encouraged among the people and also the first international post system was also made under his reign, so from this statement we can also conclude that option d) is also correct.
The yuan dynasty which was founded in 1271, by the descendant of Genghis khan whose name was Kublai khan, tried conquering Japan during the 13th century. He sent his navy twice towards the Korea strait to conquer Japan but both of the times his fleets were struck by powerful storms and got wrecked. So from the above statement we can definitely say that the statement a) is false and all other are correct.
The statement about the Mongols never building a navy is false; they indeed built a navy for overseas conquests such as the invasions of Java and Japan.
This statement is incorrect as historical evidence shows that the Mongols did build a navy and conducted overseas expeditions. For instance, they built a navy to invade Java and Japan.
Regarding psychological warfare, the Mongols were indeed known to use it effectively as part of their military strategy. They also were religiously tolerant and allowed all major world religions a place in their court. Finally, they issued bank notes to facilitate Silk Road trade, which was part of their significant contribution to improving trade routes and infrastructure during the Pax Mongolican.
Question 10 of 10 In which galaxy is the solar system located ? A. Milky Way B. Andromeda C. Nuclear Reset Selection
Answer:
Milky Way ...
Explanation:
We live in earth of solar system that is located in milky way galaxy .
Deep ocean trenches typically are not located adjacent to ________. abyssal plains transform plate boundaries young continental mountains volcanic island arc chains
Answer: Transform plate boundaries
Explanation: As transform plate boundary is the surface where the plates present slides from side of each other this is why deep ocean trenches are not adjacent to it. Lithosphere at the transform plate boundary does not get created or destroyed.They are usually found near the sea floor.They are also considered as the main reason behind the natural calamities like tsunami ,earthquakes etc.
Soil air supplies plants and microorganisms with the gases oxygen and ______________, which are needed for life processes. (two words)
Answer: Carbon Dioxide
Explanation: Soil aeration is the process that provides the air to the plants and maintains the flow of oxygen and carbon dioxide gases. These are the two most vital gases for the life process of the soil to provide it to the plants and other micro organisms. It provides these gases so that there can be production in the plant through soil.
In a species with incomplete dominance, the genotypic and phenotypic ratios will be ___________.
A. The inverse of each other (3:1, 1:3)
B. identical (1:2:1, 1:2:1)
C. different (3:1, 1:2:1)
D. unable to be compared.
Answer:
correct option is b identical (1:2:1,1:2:1)
Explanation:
In order to assess the most likely results of the crosses for those genes that display incomplete dominance, Mendel's model can be is used because these genes are acquired in retained with Mendel's fundamental rules, even if they all exhibit incomplete dominance. This can be clarified by adopting an instance of green crop inter-fertilization producing a feasible 1:2:1 genotype ratio and 1:2:1 phenotype ratio.
so correct option is b identical (1:2:1,1:2:1)
A tsunami is considered to be a:
Capillary wave
Deep water wave
Reflected wave
Refracted wave
Shallow water wave
Answer:
Shallow water wave.
Explanation:
A tsunami is considered to be a shallow water wave.
Final answer:
A tsunami is a shallow water wave typically caused by seismic activities underneath the ocean. While inconspicuous in deep water, tsunamis become significantly larger and more dangerous as they reach shallower coastal waters.
Explanation:
A tsunami is considered to be a shallow water wave. These waves are commonly initiated by disturbances such as undersea earthquakes, landslides, or volcanic eruptions. When in deep ocean, a tsunami's height can be less than 30 cm, allowing it to travel at speeds up to 700 km/h largely unnoticed. As it approaches the coast and enters shallower waters, its speed decreases, and it grows substantially in height due to the energy being compressed into a smaller column of water. The Indian Ocean tsunami of 2004, caused by an immensely powerful earthquake, is an example of the devastating effects when a tsunami reaches populated coastlines.
Regarding the distance between wave crests at sea for a tsunami traveling at 600 km/h with a frequency of one wave crest every 15 minutes: to find this, you multiply the speed of the wave by the time interval between crests. Since there are 60 minutes in an hour, a 15-minute interval is a quarter of an hour (0.25 h). Therefore, the distance between crests would be 600 km/h × 0.25 h = 150 km.
1. Which of the following can be measured the most easily?
A) Species richness B) Species evenness C) Species diversity D) Species evenness and species richness are equally easy to measure.
2. Which statement about edge effects is true?
A) They can consist of biotic changes associated with a boundary.
B) Abiotic conditions usually do not change at the boundary.
C) They always inhibit dispersal.
D) They are never barriers to dispersal.
3. Many species of butterflies are noxious to predators. They also have bright red coloration that indicates to the potential predators that they are unpleasant or even harmful to eat. This is an example of _______ coloration.
A) aposematic
B) cryptic
C) mimic
D) predative
1. C) Species diversity
It is not easy to perform any measurement about the species, be it its diversity, richness, or evenness. The easiest though seems to be the measuring of species diversity. This measurements simply gathering information about the number of species in a particular area, which is usually the easiest thing to do, as at least one individual of a species is needed so that it can be added in the measurement. The species richness and evenness though are harder, as in order to be performed, apart from knowing all the species, there should be measurement about how big of a population the species have, which can be very tricky, and in some cases almost impossible to perform, which is why it is often used a mathematical model to predict an approximate number, which often is not correct.
2. A) They can consist of biotic changes associated with a boundary
The edge effects are effects that occur at the boundaries of the biomes. At this boundaries, the two or more biomes that come in contact interact, start to mix and create a zone where there are representatives of both biomes, kind of like a transitional zone. Because around the boundary there are species from both bomes, changes start to occur, as the species adapt to the conditions, but they also change the living conditions, as well as competing with each other which can further affect one of the biomes and its structure.
3. A) aposematic
The butterflies tend to have aposematic coloration. This type of coloration does not provide camouflage for the butterflies, but instead it makes them stick out. It is a coloration where the colors are few and very intense. The reason why the butterflies have this type of coloration is that it is a sign of warning for the predators that they are not good for eating and that they can be harmful, thus to avoid them. The predators usually learn this from a young age, and tend to avoid the butterflies that have such coloration.
The thermocline is a layer in the ocean that represents:
•• Density change due to mixing.
•• Density change due to salinity.
•• Density change due to temperature.
•• Constant density due to salinity
Answer:
The thermocline is a layer in the ocean that represents:
Density change due to temperature.
Explanation:
A thermocline is a thin distinctive layer in a large body of fluid which is exactly located between warmer mixed water at the top of ocean surface and cooler deep water at the bottom of ocean surface. Salinity is defined as the total amount of salt dissolved in water.
The water in the ocean or sea forms into layers according to density. Water with high density sinks at the bottom while water with low density sits on the top. And the density of water changes with salinity and temperature. Higher salinity leads to higher density, and the water changes rapidly with depth.
Final answer:
The thermocline in the ocean is a layer that signifies a density change due to temperature, where warmer water sits over colder water, creating a stable, stratified environment.
Explanation:
The thermocline is a layer in the ocean that represents a density change due to temperature. This layer is characterized by a temperature that is significantly different from that of the surrounding layers, usually warmer water at the top and colder water below.
As the wind stirs the upper layers, it creates a mixed layer at the surface with constant temperature and salinity. Below this mixed layer is the thermocline, typically between about 200 - 1000 m depth, where the temperature decreases rapidly with depth, leading to an increase in water density. This temperature-driven density change is crucial for the ocean's vertical structure and affects oceanic currents and marine life distribution.
What is the one main reason for China's heavily polluted coastline? What is causing it? How can it be stopped ?
Answer and Explanation:
According to a report, one of the main reason for heavily polluted China's coastline is industrial waste, mainly plastic waste dumped in ocean making China the third largest plastic waste producer contributing to contamination of ocean water.
According to a survey of 2014, about 81% of China's coastline is polluted with main pollutants- fertilizers constituents like inorganic nitrogen, phosphate, oil spills and chemical waste from industries which resulted in the most powerful environmental disaster (earthquake and Tsunami on March 11, 2011).
The remedial action taken by the government to limit the pollution is by taking few preventive measures as follows:
1) Limiting the use of plastic bags, almost banning them.
2) Disposition, recycle and reuse of industrial and plastic waste
3) To restrict dumping of chemicals in water bodies or atleast reduce it.
4) Monitoring of changes in the chemical property of water and the overall impact on environment and ecosystem.
Which of the following statements about the nature of Electromagnetic radiation is NOT true? A) The sun emits less infrared radiation than it does visible radiation. B) The earth's surface reflects longwave radiation from clouds to cool down.C) Water vapor is an important contributor to the greenhouse effect in Earth's atmosphere. D) Carbon dioxide gas is a powerful greenhouse gas even in trace quantities. E) Visible radiation has shorter wavelengths than infrared radiation
Answer:
The answer would be C. Water vaopr is an important contributor to the greenhouse effect in Earth's atmosphere
Explanation:
why are you more likely to see convective clouds form on the afternoon rather than in the morning?
Answer: During the day, especially in the afternoon, layers of air heat up, which is needed to create convective clouds
Explanation: Convective clouds, as the name implies, are created by convection. It is a process of raising warmer air of lower density than is the case with the surrounding atmosphere. Warm air contains more moisture, i.e. water vapor than cold, and when warm air rises during the day, it passes through layers of cooler air, causing water vapor to condense, creating droplets. During the morning, the air is generally cold, and during the day due to the rise in temperature, certain layers of air become warm, which then begin to rise and pass through the surrounding, cooler layers. Thus, the said condensation process takes place.
Notice the newly constructed seawall in the illustration below. The MOST likely outcome of its construction is that the seawall will a.temporarily protect the cliff from beach erosion. b. permanently protect the home from beach erosion. c. increase sediment production on the beach, decreasing the rate of erosion. d. deter biologic activity that might compromise the integrity of the cliff.
The most likely outcome would be a.temporarily protect the cliff from beach erosion.
Here's the reason why:
As sea wall's construction material is likely to be rock, no matter it's weather-resistance, it would be weathered by different weathering agents, especially in area with relatively high rainfall and humidity. Sea water itself will also catalyse the weathering process by chemical weathering, or physical weathering such as hydraulic action or abrasion.
When the sea wall is not properly maintained or has been in use for a prolonged period, it may be worn off and no longer able to serve as a protection to the cliff.
Therefore, it is a temporary measure to protect the cliff from beach erosion.
Why the other reasons are false:
b. permanently protect the home from beach erosion.
-As mentioned, the seawall can not last forever due to weathering and erosion that can damage the sea wall, the answer is therefore false.
c. increase sediment production on the beach, decreasing the rate of erosion.
-While sea wall may indeed be weathered and produce sediments from the construction material, or slightly help the sediment to accumulate, it is unlikely that it can decrease the rate of erosion effectively.
d. deter biologic activity that might compromise the integrity of the cliff.
Although it is possible to construct a sea wall to prevent biological activity of the cliff, such as the growth of vegetation or being inhabited by creatures, which can damage the integrity of the cliff, a sea wall without proper maintenance may not be able to deter these activities. Besides, it is possible for creatures to reside or plants to grow in sea wall, thus it is not the most likely outcome.
Hope it helps!
The newly constructed seawall is likely to temporarily protect the cliff from beach erosion.
Explanation:The newly constructed seawall in the illustration is likely to temporarily protect the cliff from beach erosion. Seawalls are designed to act as a barrier between the ocean and the land, reducing the impact of waves on the shoreline. However, over time, the seawall itself can cause changes in sediment movement and erosion patterns.
Learn more about seawall construction and erosion protection here:https://brainly.com/question/35920181
#SPJ3
The general pattern of layered changes in soil with depth is called ______________. (1 word)
Answer:
The general pattern in changes in the layers of soil with depth is called Soil Horizon
Explanation:
The layer of soil present parallel to the surface, having different chemical physical and biological properties from the layers that are present above and below it, is known as the soil horizon.
The difference in the properties of the layers of soil can be the texture of the soil, color of the soil, particle size of the soil etc.
Cleavage in minerals refers to ________. a. a tendency to break in an irregular pattern b. a tendency to break along planes of weakness c. the sharpness of edges between crystal faces d. the development of well-formed crystal faces
The correct answer is B. I hope this helps! Best of luck to you! :)
Cleavage in minerals refers to a tendency to break along planes of weakness. Hence, option B is correct.
What is Cleavage in minerals?Cleavage is the propensity of minerals to split along crystallographic planes, resulting in planes of relative weakness. This is caused by the structural locations of atoms and ions in the crystal.
To determine the angle of cleavage, look at the intersection of the cleavage planes. Cleavage planes typically intersect at 60°, 90°, or 120° angles to straight angles. When observing flat surfaces on minerals, keep in mind that not all of them are cleavage planes.
The tendency of a material to fracture on flat planar surfaces depends on the mineral's crystal structure. These two-dimensional surfaces, referred to as cleavage planes, are produced by the alignment of atoms with weaker interactions within the crystal lattice.
Thus, option B is correct.
For more details about Cleavage in minerals, click here:
https://brainly.com/question/11933501
#SPJ2
the prevailing winds that blow between 0 and 30 degrees latitude are called:1- westerlies 2-polar easterlies 3-trade winds 4-subtropical notherlies 5- subtropical southerlies
Answer: Trade winds
Explanation: Trade winds are those winds that have the flow from east to west in the tropical region.It is named as trade winds because it provides help to the traders which are in middle age. Its has about 5 to 6 meters per second as their average speed. They are winds that blow from the range of 0 to 30 degrees latitude.Thus,the correct option is the trade winds
Answer:
3-trade winds
Explanation:
Trades winds
These winds are blowing towards west from east and found in tropics.
These winds blowing in both the hemisphere at latitudes 0 and 30 degree.mainly these winds are blowing from north east in the northern sphere and south eat in the southern sphere.
These winds also called trades.
So above from we can say that our option 3 is right.
A fold in rocks can occupy anywhere from a few centimeters to multiple kilometers. True False
Answer: True
Explanation: A fold in the rock is defined as the changes that appear in the volume and shape due to the strain applied on it. The strain results in different circumstances such as fracture , crumple etc. Compression forces are the major reason of the bend caused in the rocks. The fold occurring in the rock may vary from minute size to extremely large size and have maximum chances to be shown up in layered rocks. Therefore, the statement is true.
Lava that erupts from a volcano and cools at Earth’s surface is termed _______________ igneous rock. (1 word)
Answer:
The answer is extrusive igneous rock.
Answer: Extrusive
Explanation:
The most prolific corals in the reef systems of the Paleozoic were the schleractinians. Select one: O True False
Answer:
I believe the answer is false.
Explanation: