Question 1 Unsaved
Most of the mass of the solar system is located in which of the following?

Question 1 options:

Earth


comets


sun


Jupiter

Hello. This question is incomplete. The complete question is:

"Which statement best describes how a wave would move differently through a pot of boiling water than the steam created from it? The wave would move faster through the water than through the steam. The wave would move slower through the water than through the steam. The wave would move the same speed through the water and the steam. The wave would move through the water and steam at the same speed, but decrease in speed at the transition point. "

Answer:

The wave would move faster through the water than through the steam.

Explanation:

As we already know, the water molecules at the moment when the water is boiling move very fast, due to the thermal energy that acts on them. This movement causes the mileculas to collide with each other quickly, for this reason we can observe that movement of the boiling water. This makes the wave movement in the boiling water fast.

On the other hand, all this movement is not seen in water vapor molecules, since the space between them is larger and there is no energy acting directly on them. For this reason, we can say that, through steam, the wave would not move with such speed.

Answer:

Electric energy from the outlet transforms to radiant energy and thermal energy in the lightbulb.

Explanation:

The average force acting on the blood as it is pumped into the aorta is [tex]\boxed{0.4\text{ N}}[/tex].

Explanation:

As the blood enters the aorta, the speed of the blood increases from zero to [tex]1\text{ m/s}[/tex] in a time of [tex]0.2\text{ s}[/tex]. It means that the blood moves under the acceleration as it passes through the aorta.

The acceleration produced in a body is due to the force experienced by the particular amount of blood as it enters the aorta.

Write the expression for the acceleration of the blood as its speed increases.

[tex]\boxed{a=\dfrac{v_{f}-v_{i}}{t}}[/tex]                                      ...... (1)

Here, [tex]v_{f}[/tex] is the final velocity of blood, [tex]v_{i}[/tex] is the initial velocity and [tex]t[/tex] is the time taken to accelerate.

Substitute the values of the velocities and the time taken by the blood in equation (1).

[tex]a&=\dfrac{1-0}{0.2}\text{ m}\text{/s}^2}\\&=\dfrac{1}{0.2}\text{ m}\text{/s}^2}\\&=5\text{ m}\text{/s}^2}[/tex]

The net force acting on the blood is given by:

[tex]F=m\times{a}[/tex]                                         ...... (2)

Substitute the values of mass and acceleration in the above expression.

[tex]\begin{aligned}F&=80\text{ g}\left(\dfrac{1 \text{ kg}}{1000\text{ g}}\right)\times\left(5\text{ m/s}^2\right)\\&=0.08\times5\text{ N}\\&=0.4\text{ N}\end{aligned}[/tex]

Therefore, the average force acting on the blood as it is pumped into the aorta is [tex]\boxed{0.4\text{ N}}[/tex].

Learn More:

1. what type of mirror do dentist use https://brainly.com/question/997618

2. forces of attraction limit the motion of particles most in https://brainly.com/question/947434

3. how long to walk 2000 miles https://brainly.com/question/3785992

Answer Details:

Grade: High School

Subject: Physics

Chapter: Force and acceleration

Keywords:

heartbeat, average force, aorta, blood, rest, speed up, acceleration, initial speed, final speed, time, accelerated, 80 g, blood is pumped.

Final answer:

The average force on the blood during this time is 0.4 Newtons.

Explanation:

The average force on the blood can be calculated using the equation:

F = m * a

where F is the force, m is the mass, and a is the acceleration.

In this case, the mass of the blood is given as 80 g (or 0.08 kg) and the acceleration is the change in velocity divided by the time taken.

Given that the blood is accelerated from rest to 1 m/s in 0.2 s, the acceleration is calculated as:

a = (v-u)/t

Substituting the given values:

a = (1-0)/0.2 = 5 m/s²

Plugging the values back in the original equation:

F = 0.08 kg * 5 m/s² = 0.4 N

So, the average force on the blood during this time is 0.4 Newtons.

The power rating of the lightbulb is mathematically given as

P=  60 watts

Question Parameters:

An incandescent lightbulb operating at 120 volts draws a current of 0.50 ampere for 240 seconds.

Generally, the equation for the Power  is mathematically given as

P=VI

Therefore

P= (20 x 0.5

P=  60 watts

In conclusion, the power rating of the lightbulb

P=  60 watts

Read more about Power

https://brainly.com/question/10203153

The downward force of the water on the beaker's bottom is its weight, calculated using the beaker's volume, the density of water, and acceleration due to gravity.

The question is asking about the downward force exerted by water on the bottom of a cylindrical beaker. This situation relates to principles in physics around fluid dynamics and specifically Pascal's principle. According to Pascal's principle and the equation for fluid pressure, the downward force exerted by the water (F) is its weight, which can be calculated as the product of the volume of the water, the density of the water, and the acceleration due to gravity (g).

Since the beaker is filled to the brim, the volume (V) of the water is equal to the volume of the cylinder, which can be calculated by the formula V = π(r^2)h, where r is the radius and h is the height of the beaker. The radius can be obtained from the given diameter. If we have the density (ρ) of water and the value for g, we can substitute these in the mentioned equation to get the force F = ρVg.

Finally, using the calculated volume, the known density of water (approximately 1000 kg/m³ for standard conditions), and the standard gravity (approximately 9.8 m/s²), we can find F, which is the downward force from the water on the beaker's bottom.

https://brainly.com/question/30578986

#SPJ12

In this exercise we have to use the block knowledge in a system, thus we find that:

1) 33.4 J

2) 0J

3) 2.84 m/s

4) 14.1 J

5) 19.9 N

6) 19.3 J

So with the knowledge of force and energy we can calculate what is required, like this:

1) We have to calculate the value of work in the system which will be:

[tex]W=FS\\W=0.71 m * 9.8 m/s^2 * 4.8kg\\ = 33.3984 kg*m^2/s^2 \\= 33.3984 J \\=33.4 J[/tex]

2) As we are dealing with the work of the normal force, we will have to be zero, since the force will not have a distance, so:

[tex]W=FS\\W=35*0\\W=0J[/tex]

3) We want to calculate the final speed of the system as a whole, so:

[tex]E = 0.5MV^2 \\E = 33.3984 J\\ 33.3984 = 0.5*(3.5 + 4.8 )V^2\\ 33.3984 = 0.5*8.3 *V^2\\ 33.3984 = 4.15*V^2\\ 8.047807229 = V^2\\V= 2.83686574 m/s\\V=2.84 m/s[/tex]

4) We want to find the work of the voltage in this way we have:

[tex]E = 0.5MV^2\\ E = 0.5*3.5kg* (2.84 m/s)^2\\ E = 0.5*3.5kg* 8.0656 m^2/s^2\\ E = 14.1148 kg*m^2/s^2\\ E = 14.1 J[/tex]

5) Now calculating the value of the string tension, we have:

[tex]T= 14.1 J / 0.71 m \\= 19.88 J/m\\= 19.88 kg*m/s^2\\ = 19.88 N[/tex]

6) Calculating the value of work on top of block 2 we have:

[tex]E = 0.5MV^2\\ E = 0.5*4.8 kg * (2.84 m/s)^2\\ E = 0.5*4.8 kg * 8.0656 m^2/s^2\\ E = 19.35744 kg*m^2/s^2\\ E = 19.4 J[/tex]

See more about work at brainly.com/question/756198

Final answer:

To find the minimum stopping distance, we use the formula d = v² / (2 · μ_s · g), considering the speed and the coefficient of static friction. For wet conditions (μ_s = 0.102), the stop distance is 27.8 meters, and for dry conditions (μ_s = 0.603), it is 4.6 meters.

Explanation:

To calculate the minimum stopping distance of a car traveling at 52.0 mi/h (which converts to approximately 23.2 m/s) on a horizontal highway, we can use the formula for stopping distance based on the coefficient of static friction ( μ_s ) and the deceleration rate:

d = v² / (2 · μ_s · g), where v is the initial speed in m/s, μ_s is the coefficient of static friction, and g is the acceleration due to gravity (9.8 m/s²).

(a) On wet concrete, where μ_s = 0.102, the minimum stopping distance is:

d = (23.2²) / (2 · 0.102 · 9.8) = 27.8 meters

(b) On dry concrete, where μ_s = 0.603, the minimum stopping distance is:

d = (23.2²) / (2 · 0.603 · 9.8) = 4.6 meters

These calculations provide an understanding of the significance of road conditions on stopping distances, emphasizing the increased risk associated with wet roads.

Sodium chloride (table salt) is safe to eat in moderate amounts because its chloride ions are chemically bound, unlike toxic chlorine gas.

Sodium chloride, commonly known as table salt, is composed of sodium (Na+) and chloride (Cl-) ions. While chlorine gas (Cl2) can be toxic when inhaled or ingested in large amounts, chloride ions in sodium chloride are chemically bound to sodium ions, forming a stable compound.

When consumed in appropriate quantities, sodium chloride dissociates into its respective ions in the digestive system. Sodium ions play crucial roles in nerve transmission and muscle function, while chloride ions help maintain the body's acid-base balance and regulate fluid levels.

The human body has evolved mechanisms to regulate the intake and excretion of sodium and chloride ions, ensuring proper physiological function. Ingesting moderate amounts of sodium chloride as part of a balanced diet poses no significant health risks and is necessary for maintaining normal bodily functions.

However, excessive consumption of sodium chloride can lead to health issues such as high blood pressure and cardiovascular diseases, emphasizing the importance of moderation in dietary intake.

The atomic mass of caesium with atomic number of 55 and neutron of of 78 is 133 amu.

The atomic mass of an element is the sum of the proton number and the neutron number.

The proton and neutron contributes mostly to the weight of an atom. The proton and neutron are located in the nucleus an atom.

The atomic number of an element is the same as the proton number of an element. Therefore, since the atomic number of caesium is 55, the proton number is also 55.

The atomic mass of caesium can be computed as follows:

learn more on atomic number: https://brainly.com/question/14300579?referrer=searchResults

the answer is visible light

Answer : Resistance of the dishwasher is 6.67 ohms.

Explanation :

It is given that,

Total voltage flowing in a house, V = 120 V

Current flowing, I = 18 A

According to Ohm's law :

V = I R ...........(1)

R is the resistance of the circuit.

Putting all values in (1) we get :

[tex]R=\dfrac{V}{I}[/tex]

[tex]R=\dfrac{120\ V}{18\ A}[/tex]

[tex]R=6.666\ \Omega[/tex]

or

[tex]R=6.67\ \Omega[/tex]

So, the resistance of the dishwasher is [tex]R=6.67\ \Omega[/tex].

Final answer:

Adults should perform muscle-strengthening activities that work all major muscle groups at moderate to high intensity at least 2 days per week for additional health benefits.

Explanation:

Adults should engage in muscle-strengthening activities that involve all major muscle groups, performed on 2 or more days per week. These activities, such as push-ups, sit-ups, squats, and lifting weights, should be done at moderate or greater intensity to provide additional health benefits. Over time, the frequency and intensity of these workouts can be increased to further enhance muscle strength and endurance.

The initial mass of the Bismuth-212 sample is 10.56 grams.

To find the initial mass of the Bismuth-212 sample, we can use the concept of half-life. The half-life of Bismuth-212 is given as 60.5 seconds. Since the sample has a mass of 2.64 grams after 121 seconds, we can calculate the number of half-lives that have passed.

The number of half-lives is given by the formula:     Number of Half-lives = Total Time / Half-life

So, the number of half-lives = 121 s / 60.5 s = 2 half-lives.

Since each half-life results in half the initial mass remaining, after 2 half-lives, the remaining mass would be (1/2)(1/2) = 1/4 of the initial mass.

If we let the initial mass be x grams, then after 2 half-lives, the remaining mass is (1/4)x grams.

Given that the remaining mass is 2.64 grams, we can solve for the initial mass:

(1/4)x = 2.64 grams

Simplifying, x = 2.64 grams * 4 = 10.56 grams.

Therefore, the initial mass of the sample of Bismuth-212 is 10.56 grams.

https://brainly.com/question/29970608

#SPJ11

Answer:As the air bubbles rise to the surface, the pressure on them decreases. This decrease in pressure allows the air to expand and each bubble increases in size. Boyle’s law explains why this occurs.

Explanation:

The statement that best describes what occurs as the water boils is Thermal energy is increasing, and temperature is constant, therefore the correct option is B.

It is a temperature at which the pressure exerted by the external atmosphere is equal to the vapor pressure of the substance.

The boiling point depends on atmospheric pressure, temperature, bond strength, and vapor pressure of the liquid.

When the water boils by utilizing the latent heat at 100 degrees Celcius, the phase of the water is changing at a constant temperature, the phase change of water from liquid to gaseous state happens because of the increase in the thermal energy required in the form of latent heat.

Thus, The sentence that best sums up what happens when water boils is option B because thermal energy is rising and temperature is staying the same.

Learn more about the boiling point from here

brainly.com/question/25777663

#SPJ1

Final answer:

The correct description of what occurs as water boils is that B.thermal energy increases while temperature remains constant. This is due to the ongoing phase transition from liquid to gas, which requires energy to overcome intermolecular bonds.

Explanation:

The statement that best describes what occurs as water boils is that thermal energy is increasing, and temperature is constant. When water boils, the temperature remains constant at the boiling point because extra energy is used to convert the liquid into gas, thus breaking the intermolecular bonds. This is an example of a phase transition, where the phase change occurs at a fixed temperature, which is a physical property known as the boiling point.

Heat is added continuously, but instead of increasing the temperature, it provides the energy necessary for the phase transition from liquid to gas. During this process, known as boiling, the temperature remains constant at the boiling point while the state of the matter changes. The energy absorbed during boiling contributes to the increase in potential energy of the molecules, facilitating the liquid-to-gas phase transition.

In transverse waves, particles move perpendicularly to the wave's direction, while in surface water waves, they follow circular orbits due to a combination of longitudinal and transverse motions. The size of these orbits decreases with depth, and a slight horizontal movement called Stokes drift occurs after each wave crest passes.

Particle Movement in Different Waves

In transverse waves, particles move in a direction perpendicular to the propagation of the wave. Examples of transverse waves include vibrations in a stretched string or ripples on the surface of water when viewed from the side. However, the surface water waves present a more complex motion. Particles in these waves move in circular orbits, which is a combination of longitudinal (back and forth) and transverse (up and down) motions.

Water waves are created when wind transfers energy to the water surface, leading to the oscillatory motion of water particles. The size of these circular orbits decreases as the depth increases. In deep water, particles move in closed circular paths, whereas in shallow water, their motion is elliptical due to the compression of the wave's energy.

Moreover, water waves display a phenomenon called Stokes drift, where particles are slightly displaced horizontally after the passage of each wave crest. This accounts for the small forward movement observed alongside the predominant up and down movement of the particles in the wave.

Answer:

If we Drop any object there is gravity acts on it and the air resistance but since, we are given the condition in absence of air resistance

So, we will consider only the gravity and due to gravity all the three bowls bowling ball, a tennis ball, and a feather from the top of a tall building will hit the ground at same time.

Hence, The option D is correct.

Option A,B,C and E are discarded.

The iron filings sprinkled on a piece of paper demonstrate is "the pattern of the magnetic fields lines".

A magnetic field would be a vector field which thus explains the magnetic influence affecting electric charges, electric currents, as well as magnetic materials.

The chemical element iron has the atomic number 26 and also the symbol Fe. It is just a metal that would be found in group 8 of such periodic table and the very first transition series.

Therefore, the iron filings sprinkled on a piece of paper demonstrate is "the pattern of the magnetic fields lines".

To know more about magnetic fields and iron

https://brainly.com/question/14848188

#SPJ2

the speed and direction the object is moving.

The Answer is A)

ON USAtestprep

The image distance from the lens is 22.5 cm, and the height of the image is -6.25 cm indicating it is inverted.

To determine the distance of the image from the lens and the height of the image, we use the lens formula and magnification formula.

Lens formula:

[tex]1/f = 1/d_o + 1/d_i[/tex]

Given:

Substitute the values:

[tex]1/10 = 1/18 + 1/d_i[/tex]

[tex]1/d_i = 1/10 - 1/18 = 0.1 - 0.0556 = 0.0444[/tex]

[tex]d_i = 22.5 cm[/tex]

So, the image distance from the lens is 22.5 cm.

Next, we calculate the height of the image using the magnification formula:

Magnification (m) = [tex]-d_i/d_o = h_i/h_o[/tex]

Given:

[tex]h_i = h_o * (-d_i/d_o)[/tex]

Substitute the values:

[tex]h_i[/tex] = 5 * (-22.5/18)

[tex]h_i[/tex] = -6.25 cm

Therefore, the height of the image is -6.25 cm which indicates the image is inverted.

Answer:

4.0

Explanation: