Question 6 the chemical formula ch2o can be classified as: empirical only. molecular only. empirical, possibly molecular. not enough information none of the above

Coal is considered a fossil fuel because it originates from the remains of plants that lived 300 to 400 million years ago. Over time, these plant remains were subjected to high pressure and temperature, transforming them into a carbon-rich fuel source called coal. The burning of coal as an energy source releases significant amounts of CO2.

Coal is categorized as a fossil fuel due to its origins. It was formed from the remains of trees, ferns, and other plant life that lived 300 to 400 million years ago. These organic materials, over time and under the pressure of overlying sediment, were transformed into a carbon-rich material known as coal.

Primarily, during the Carboniferous period, plants underwent rapid growth in swampy areas. After their life cycle, these plants do not entirely decompose and rot, but instead, create peat. As additional layers of sediment build-up and the heat and pressure increase, this peat gradually transforms into different types of coal, namely lignite, sub-bituminous coal, bituminous coal, and anthracite. This process of coal formation is known as coalification.

A key aspect of fossil fuels like coal is their high carbon content. When burned, they release significant amounts of energy, which makes them valuable resources for electricity generation and industrial processes. However, the combustion of coal also releases large amounts of CO2, a significant contributor to global warming.

https://brainly.com/question/3371055

#SPJ12

The answer to your question is Xylem

Answer :

Heating takes place during the process of Evaporation, Melting, Sublimation.

Cooling takes place during the process of Freezing, Condensation, Deposition.

Explanation :

Heating : It means thermal energy releases.

Cooling : It means thermal energy absorbs.

Evaporation : It is a type of vaporization process in which a liquid changes into gas phase by providing heat.

Melting : It is a process in which a solid changes into liquid phase by providing heat.

Sublimation : It is a process in which a solid changes directly into gas phase without passing through a liquid phase.

Freezing : It is a process in which a liquid transform into a solid phase at low temperature.

Condensation : It is a process in which a water vapor(gas) changes into liquid state at low temperature.

Deposition : It is a process in which a gas transforms directly into a solid phase without passing through a liquid phase.

Answer:

Heating: evaporation, melting, sublimation

Cooling: condensation, freezing, deposition

According to law of conservation of mass, equal masses have the same velocity, hence both the cars have the same velocity.

According to law of conservation of mass, it is evident that mass is neither created nor destroyed rather it is restored at the end of a chemical reaction .

Law of conservation of mass and energy are related as mass and energy are directly proportional which is indicated by the equation E=mc².Concept of conservation of mass is widely used in field of chemistry, fluid dynamics.In chemical reactions, mass is always conserved.

Law needs to be modified in accordance with laws of quantum mechanics under the principle of mass and energy equivalence.This law was proposed by Antoine Lavoisier in the year 1789.

Learn more about law of conservation of mass,here:

https://brainly.com/question/28711001

#SPJ6

The skeletal formulae for the three tertiary amines according to the molecular formula C5H13N are N(CH3)3, N(CH3)(C2H5), and N(CH3)(C3H7). These demonstrate the concept of constitutional isomerism in organic chemistry.

Tertiary amines are those amines in which the nitrogen atom is bonded to three organic groups. In the context of the given molecular formula - C5H13N - the three constitutional isomers that are tertiary amines can be represented as follows:

To draw these, remember that each carbon atom is at the end of each branch and the N indicates the central nitrogen atom. The formation of these distinct structures from the same molecular formula demonstrates the concept of constitutional isomerism in organic chemistry.

https://brainly.com/question/30201990

#SPJ11

To calculate how much energy 20 grams of water needs to increase its temperature from 283 °C to 303 °C, we can use the Heat Transfer equation. After converting the temperature to Kelvin and performing the calculation, we find that the water needs to absorb 1673.6 Joules of energy.

To calculate how much energy must be absorbed for water to increase its temperature, we can use the formula for Heat Transfer: Q = mcΔT. Where Q is the heat transferred, m is the mass of the object (water in this case), c is the specific heat capacity of the substance, and ΔT is the change in temperature. For water, the specific heat capacity (c) is 4.184 J/g °C.

First, we need to convert the temperature from Celsius to Kelvin by adding 273 to each temperature: 283 °C becomes 556 K and 303 °C becomes 576 K. The change in temperature (ΔT) is the final temperature minus the initial temperature (576 K - 556 K = 20 K).

Therefore, the heat equation becomes: Q = (20 g)(4.184 J/g °C)(20 K).

Calculating this gives Q = 1673.6 Joules. So, the water needs to absorb 1673.6 Joules of energy to increase its temperature from 283 °C to 303 °C.

https://brainly.com/question/13433948

#SPJ12

The energy required to increase the temperature of 20 grams of water from 283°C to 303°C can be calculated using the specific heat formula. By inserting the known values into the formula, it was determined that the process requires an input of 1673.6 Joules.

To work out the energy absorbed by water to increase its temperature, you need to use the heat capacity or specific heat formula q = mcΔT. Here, 'q' is the heat energy absorbed or released, 'm' is the mass of the substance, 'c' is the specific heat, and 'ΔT' is the change in temperature.

In the question, the mass 'm' is 20 grams of water, and the change in temperature 'ΔT' is the difference between final and initial temperatures, 303°C - 283°C = 20°C. From the reference provided, the specific heat 'c' for water is 4.184 J/g °C. Substituting these values into the formula, we get:

q = (20 g) x (4.184 J/g °C) x (20 °C) = 1673.6 J.

Therefore, 1673.6 Joules of energy must be absorbed by 20.0 grams of water to increase its temperature from 283°C to 303°C.

https://brainly.com/question/37854166

#SPJ12

Final answer:

A fatty acid is the simplest form of lipid, consisting primarily of a carbon-hydrogen chain with an acid group on one end and a methyl group on the other.

Explanation:

A fatty acid is the simplest form of lipid. It consists mainly of chains of carbon and hydrogen atoms. At one end of this chain, there is an acid group (carboxylic acid), and at the other end, there is a methyl group. Fatty acids can exist alone or as monomers of larger lipid molecules such as triglycerides.

There are two types of fatty acids: saturated fatty acids, where the carbon chain is fully attached to hydrogen atoms since the carbons are connected by single bonds; and unsaturated fatty acids, where the carbon atoms are not bonded to as many hydrogen atoms as they possibly could be due to the presence of double or triple bonds between some adjacent carbon atoms.

Final answer:

The hybrid orbital set used by the central atom in NO3- is sp2 hybridization. In sp2 hybridization, the nitrogen atom combines one 2s orbital and two 2p orbitals to form three sp2 hybrid orbitals. These sp2 hybrid orbitals on the nitrogen atom overlap with the p orbitals of the oxygen atoms to form sigma bonds, resulting in the formation of a trigonal planar molecule.

Explanation:

The hybrid orbital set used by the central atom in NO3- is sp2 hybridization.

In NO3- (nitrate ion), the central atom is nitrogen (N) surrounded by three oxygen (O) atoms. According to VSEPR theory, the electron-pair geometry around the central nitrogen atom is trigonal planar, which corresponds to sp2 hybridization. In sp2 hybridization, the nitrogen atom combines one 2s orbital and two 2p orbitals to form three sp2 hybrid orbitals, which are arraned in a trigonal planar geometry.

These sp2 hybrid orbitals on the nitrogen atom overlap with the p orbitals of the oxygen atoms to form sigma bonds, resulting in the formation of a trigonal planar molecule.

Answer:

Nuclear energy

Explanation:

There are many sources of energy available in nature which are harnessed by humans for their use. Some of these sources are present in abundant quantity (solar energy) while others take million of years to renew (coal and petroleum).

Nuclear energy is generated when two nuclei fuse into a larger nuclei (nuclear fusion) or a large nuclei dissociates into smaller ones (nuclear fission) .

A small quantity of nuclear fuel produces a large amount of energy. It is difficult to control the energy production process on which chemist hve worked. Also, the disposal of radioactive waste produced was also a challenge.

Answer:

Summary. Cellular respiration is the aerobic process by which living cells break down glucose molecules, release energy, and form molecules of ATP. Overall, this three-stage process involves glucose and oxygen reacting to form carbon dioxide and water.

Explanation:

The correct statement from the given list of statements would be a rock will weigh more on Earth than on the moon, therefore the correct answer is option B.

Newton's Second Law states that The resultant force acting on an object is proportional to the rate of change in momentum.

The weight of any object uses the multiplication of the Mars and the gravity of the respective planet in our case the weight is measured with respect to the gravity of the earth

Weight  = Mass × (acceleration due to gravity)

As given in the problem mem we have to find the correct statement from the given list of the statements.

The acceleration due to gravity is greater on the earth as compared to the moon.

Thus, a rock will weigh more on Earth than on the moon, therefore the correct answer is option B.

To learn more about Newton's second law here, refer to the link ;

brainly.com/question/13447525

#SPJ2

Strong electrolytes better separates into particles (ions) in water because of their ionic bond.

For example sodium chloride is ionic compound and strong electrolyte and dissociates in water on hydrated sodium cations and chlorine anions:

NaCl(aq) → Na⁺(aq) + Cl⁻(aq).

Final answer:

The type of solute that predominantly exists as hydrated ions in an aqueous solution includes salts with small, highly charged ions like Mg²⁺, Al³⁺, SO₄²⁻, and PO₄³⁻. These ions are stabilized in solution through hydration by water molecules due to the polar nature of water, making it a powerful solvent for ionic compounds.

Explanation:

The type of solute that is present in an aqueous solution predominantly as hydrated ions rather than as molecules is typically composed of salts containing small, highly charged ions such as Mg²⁺, Al³⁺, SO₄²⁻, and PO₄³⁻. These ions have a greater tendency to form ion pairs due to strong electrostatic interactions, but in aqueous solutions, they are often found as hydrated ions surrounded by a shell of water molecules. Hydration helps to stabilize these solutions by preventing the positive and negative ions from reassociating and precipitating. This process is critical for understanding the behaviors of electrolytic solutions, where salt dissolves in water and dissociates into its component ions, leading to the formation of solvated ions which can conduct electricity.

The stabilization of ions in solution through hydration is fundamental to many chemical processes, including reactions in aqueous solutions and the biochemical activities inside cells. The water molecules' ability to surround and stabilize ions is largely due to the polar nature of water, arising from the differences in electronegativity between hydrogen and oxygen. This property makes water an excellent solvent for ionic compounds.

the answer is USA and Russia

Ans: B) United States and Russia

Energy sources can be broadly classified into two categories: Renewable and non-renewable sources.

Renewable sources are those that can be naturally replenished like, solar energy, wind, hydrothermal etc

In contrast, non-renewable sources of energy are a finite resources and cannot be replenished. Fossil fuels like coal, oil, gas are all non-renewable sources. Coal is the most widely used source of energy with the United States and Russia being the two countries that have nearly 50% of the global coal reserves.

The oxidation number of H is -1.

Sum of the oxidation numbers in each element = charge of the complex

CaH₂ has 1 Ca atom and 2H atoms. The charge of the complex is zero. Let’s say Oxidation number of H is "a".

Then,

    (+2) + 2 x a = 0

        +2  + 2a  = 0

                  2a = -2

                    a = -1

Hence, the oxidation number of Hydrogen atom in CaH₂ is -1

In the compound CaH2, calcium has an oxidation number of +2, and hydrogen has an oxidation number of -1, balancing the charges. The oxidation states of elements in a compound like CaH2 influence their properties and reactivity.

In the compound CaH2, calcium has an oxidation number of +2 and hydrogen has an oxidation number of -1.

Hydrogen usually has an oxidation number of +1 except when bonded to metals in hydrides where it is -1. This is the case in compounds like CaH2.

Each hydrogen atom in CaH2 carries a charge of -1, balancing with the +2 charge of calcium to maintain overall charge neutrality.

The number of electrons that can have a quantum number of n = 2 in an atom is eight. This total includes two electrons in the 2s subshell and six electrons in the 2p subshell.

The number of electrons that can have a quantum number of n = 2 in an atom is determined by the possible sets of quantum numbers for the n = 2 shell and the number of electrons the subshells can accommodate. Given n = 2 for the shell, the rules for quantum numbers limit ℓ (the angular momentum quantum number) to be 0 or 1. There are two subshells for n = 2, which are the 2s and 2p subshells.

The 2s subshell (ℓ = 0) can have two electrons, one with spin projection +1/2 and one with -1/2. The 2p subshell (ℓ = 1) has three possible values for the magnetic quantum number, mℓ, which are -1, 0, and +1. Since each of these can be paired with two possible spins, +1/2 and -1/2, this means there can be six electrons in the 2p subshell (2(2ℓ + 1) where ℓ = 1). Combining the capacities of the two subshells, the n = 2 shell can hold a total of eight electrons.

https://brainly.com/question/27152536

#SPJ2

the answer is b i just got it right on usatestprep

The number of moles of H₃PO₄ needed to reach the equivalence point is 0.009 moles.

To find the number of moles of H₃PO₄ required to reach the equivalence point, we need to understand the stoichiometry of the reaction between NaOH and H₃PO₄. The balanced chemical equation for the reaction is:

[tex]\[ H_3PO_4 + 3NaOH \rightarrow Na_3PO_4 + 3H_2O \][/tex]

From the equation, we see that one mole of H₃PO₄ reacts with three moles of NaOH. Now, we are given that 30 ml of 0.3 M NaOH is required to titrate H₃PO₄ to the equivalence point.

First, we calculate the number of moles of NaOH used in the titration:

[tex]\[ \text{Moles of NaOH} = \text{Volume of NaOH (L)} \times \text{Molarity of NaOH} \][/tex]

Since the volume is given in milliliters, we need to convert it to liters:

[tex]\[ 30 \text{ ml} = 30 \times 10^{-3} \text{ L} \][/tex]

Now, we can calculate the moles of NaOH:

[tex]\[ \text{Moles of NaOH} = 30 \times 10^{-3} \text{ L} \times 0.3 \text{ M} \] \[ \text{Moles of NaOH} = 0.009 \text{ moles} \][/tex]

Since the stoichiometry of the reaction is 1 mole of H₃PO₄ to 3 moles of NaOH, the moles of H₃PO₄ required for the reaction is one-third of the moles of NaOH:

[tex]\[ \text{Moles of H}_3\text{PO}_4 = \frac{1}{3} \times 0.009 \text{ moles} \]\[ \text{Moles of H}_3\text{PO}_4 = 0.003 \text{ moles} \][/tex]

To react with all of the NaOH provided, we need three times this amount of H₃PO₄:

[tex]\[ \text{Moles of H}_3\text{PO}_4 = 0.003 \text{ moles} \times 3 \]\[ \text{Moles of H}_3\text{PO}_4 = 0.009 \text{ moles} \][/tex]

Therefore, 0.009 moles of H₃PO₄ are needed to reach the equivalence point with 30 ml of 0.3 M NaOH.

Answer:

False

Explanation:

But with proper argument both sides have a point. Yes, the earth naturally makes there energy sources, but with out human motivation and work ethic we wouldn't have the power to harness the energy and use it in our every day lives. But the answer is FALSE

The 0.01 M LiOH solution is a basic solution as LiOH is a strong base. This solution has a pH value greater than 7.

The solution of 0.01 M LiOH (Lithium hydroxide) in water is basic, not an acidic one. This is because LiOH is a strong base that dissociates fully in water forming OH- ions, and these ions cause the pH of the solution to be greater than 7. Hence, the correct statement is d. The solution is basic with a pH greater than 7.

https://brainly.com/question/34717570

#SPJ3

Ionic compounds are generally solid at room temperature with high melting and boiling points. They are water soluble and can conduct electricity when melted or dissolved in water.

The physical state of nearly all ionic compounds at room temperature is solid. These substances are generally made up of a representative unit comprising a metal cation and a nonmetal anion arranged in a crystal lattice structure. Ionic compounds, such as sodium chloride, have high melting and boiling temperatures, indicating that a significant amount of energy is required to break the ionic bonds within the crystal lattice. For instance, sodium chloride melts at 801 0C and boils at 1413 0C.

These compounds are typically water soluble, which means they can dissolve in water, dissociating into their respective ions. Furthermore, ionic compounds in solid form do not conduct electricity, but they become electrically conductive when melted or dissolved in water, as the ions are free to move.

Compounds are substances made up of similar molecules with atoms of various elements. The atoms of two or more elements form bonds and combine to yield a compound.

[tex]\rm CH_{3} - CH_{2} -O - CH_{3}[/tex]  will have a sweet smell.

Therefore, option C. [tex]\rm CH_{3} - CH_{2} -O - CH_{3}[/tex]  is the sweet-smelling compound.

Learn more about ether here:

https://brainly.com/question/15078614

The moles of I₂ that will form 3.58 g of  NI₃ is  0.0135 moles

The mole is an amount unit similar to familiar units like pair, dozen, gross, etc. It provides a specific measure of the number of atoms or molecules in a bulk sample of matter.

A mole is defined as the amount of substance containing the same number of atoms, molecules, ions, etc. as the number of atoms in a sample of pure 12C weighing exactly 12 g.

Given,

Molar mass of I₂ = 253.8 g/mol

Molar mass of NI₃ = 394.71 g/mol

N₂ + 3I₂ = 2NI₃

Mass of NI₃ = 3.58g

Moles of NI₃ = mass / molar mass

= 3.58 / 394.71

= 0.009 moles

from the reaction, 2 moles of NI₃ need 3 moles of I₂

1 mole of NI₃ will need 3/2 moles of I₂

So, 0.009 moles of NI₃ will need = 1.5 × 0.009 = 0.0135 moles of  I₂

Learn more about Moles, here:

https://brainly.com/question/15209553

#SPJ6