What is the keq value for the following reaction at equilibrium at a temperature of 298K if the concentrations (in mol/L) of the reactants and products are [N2O4] = 0.0450 and [NO2] = 0.0161?
N2O4(g) <--> 2NO2(g)
When calcium carbonate is heated strongly, it forms calcium oxide and carbon dioxide. what mass of calcium carbonate is needed to make 50.0 g of calcium oxide?
To produce 50.0 g of calcium oxide, 89.29 g of calcium carbonate is required. The amount is calculated based on the fixed ratio of the decomposition reaction of calcium carbonate, which aligns with the law of conservation of mass.
To determine the mass of calcium carbonate ([tex]CaCO_3[/tex]) needed to produce 50.0 g of calcium oxide (CaO), it's essential to refer to the stoichiometry of the chemical reaction. The balanced chemical equation for the decomposition of calcium carbonate is:
[tex]CaCO_3(s) \rightarrow CaO(s) + CO_2(g)[/tex]From the given examples, we can deduce that when 10.0 g of calcium carbonate decompose, they produce 5.6 g of calcium oxide. This means there is a fixed ratio of mass of calcium carbonate to calcium oxide, which is:
Mass of CaCO3 : Mass of CaO = 10.0 g : 5.6 gTo produce 50.0 g of calcium oxide, we can set up a proportion based on the fixed ratio:
10.0 g CaCO3 / 5.6 g CaO = x g CaCO3 / 50.0 g CaOBy solving for x, which represents the mass of calcium carbonate needed, we can cross-multiply and divide to find the answer:
[tex]x = (10.0 g CaCO3 \times 50.0 g CaO) / 5.6 g CaO[/tex]x = 89.29 g of CaCO3
Therefore, to obtain 50.0 g of calcium oxide, you would need 89.29 g of calcium carbonate. This calculation is in agreement with the law of conservation of mass, which states that mass is neither created nor destroyed in a chemical reaction.
The acid dissociation constant for an acid dissolved in water is equal to the ____.
a. equilibrium constant
b. equilibrium constant times the concentration of water
c. equilibrium constant divided by the concentration of water
d. equilibrium constant times the equilibrium constant of water
Answer:The correct answer is option b.
Explanation:
[tex]HA+H_2O\rightleftharpoons A^-+H_20^+[/tex]
The equilibrium constant expression is given as:
[tex]K_{eq}=\frac{[A^-][H_3O^+]}{[HA][H_2O]}[/tex]
[tex]K_a=K_{eq}\times [H_2O]=\frac{[A^-][H_3O^+]}{[HA]}[/tex]
The acid dissociation constant is product of equilibrium constant and concentration of water.
Hence,from the given options the correct answer is option b.
HELP PLEASE!! ILL GIVE 20 POINTS :)))
1)The compound CO2 is an example of a(n) (2 points)
atom
element
ionic compound
covalent compound
2) What is another name for a compound known as a salt? (2 points)
Molecule
Covalent compound
Element
Ionic compound
What monomers are found in DNA and RNA?
A-amino acids
B-nucleotides
C-fatty acids
D-saccharides
In the alveoli and lung capillaries, co2 and o2 are exchanged by means of _____.
In the alveoli of the lungs, CO2 and O2 are exchanged with blood in the surrounding capillaries via diffusion. This passive process occurs due to the concentration gradients of the gases and is aided by the large surface area of the alveoli and the thin walls of both the alveoli and capillaries.
Explanation:In the alveoli and lung capillaries, CO2 and O2 are exchanged by means of diffusion. This process is known as pulmonary gas exchange and is crucial for respiration. Oxygen diffuses from the alveoli into the blood because there is a higher concentration of oxygen in the inhaled air than in the blood of the capillaries. Conversely, carbon dioxide, which is more concentrated in the blood, diffuses from the capillaries into the alveoli to be exhaled. This exchange occurs passively and requires no energy due to the concentration gradients between the gases in the alveoli and the blood.
The efficiency of this gas exchange is supported by the large surface area provided by the vast number of alveoli in the lungs and the thin-walled nature of the alveoli and capillaries. Constant blood flow and regular breathing maintain a steep concentration gradient for oxygen and carbon dioxide, facilitating the diffusion process.
A chef is going to use a mixture of two brands of italian dressing. the first brand contains 7% vinegar, and the second brand contains 11% vinegar. the chef wants to make 240 milliliters of a dressing that is 8% vinegar. how much of each brand should she use?
Answer is: 180 mL of 7% vinegar and 60 mL of 11% vinegar.
ω₁ = 7% ÷ 100% = 0.07.
ω₂ =
11% ÷ 100% = 0.11.
ω₃ =
8% ÷ 100% = 0.08.
V₁ = ?.
V₂ =
?.
V₃ =
V₁ + V₂.
V₃ = 240 mL.
V₁ = 240 mL - V₂.
ω₁ ·
V₁ + ω₂ ·V₂ =
ω₃ · V₃.
0.07 · (240 mL - V₂) + 0.11 · V₂ = 0.08 · 240 mL.
16.8 mL - 0.07V₂ + 0.11V₂ = 19.2 mL.
0.04V₂ = 2.4 mL.
V₂ = 2.4 mL ÷ 0.04.
V₂ = 60 mL.
V₁ = 240 mL - 60 mL.
V₁ = 180 mL.
Which represent correct variations of the formula for speed? Check all that apply. t = s = t = s = dt d = st d =
Answer: t = d/s , s= d/t d= st
Explanation:
I did the assignment (Also Ikix don´t take this down again)
The correct variations of the speed formula are d = st, representing the calculation of distance, and t = d/s, representing the calculation of time. The options s = t and s = dt don't seem to be valid variations of the speed formula.
Explanation:The formula for speed is typically represented as s = d/t, where s is speed, d is distance, and t is time. The variations of this formula would then be d = st, which gives us the distance traveled if we know the speed and time, and t = d/s, which gives us the time taken if we know the distance and speed. These variations are crucial in different parts of physics, primarily when dealing with motion-related problems.
In the question, the terms d = st and t = d/s are correct variations, while s = t and s = dt don't seem to be valid in the context of speed formula. In speed calculations, it's always important to remember units of measurement, as speed could be recorded in terms such as miles per hour or meters per second, depending upon the context.
Learn more about Speed Formula Variations here:https://brainly.com/question/16242493
#SPJ2
why are you able to collect a more concentrated sample of ethanol from a mixture of water and ethanol using fractional distillation
Why did the Tacoma Narrows Bridge Collapses
Final answer:
The Tacoma Narrows Bridge collapsed due to resonance caused by heavy crosswinds and insufficient damping. The bridge's design did not consider these factors, leading to its failure.
Explanation:
The catastrophic collapse of the Tacoma Narrows Bridge stands as a poignant reminder of the critical importance of comprehensive engineering considerations. The unfortunate event was precipitated by intense crosswinds that triggered resonant oscillations within the bridge, ultimately leading to its demise. The absence of sufficient damping, exacerbated by the detachment of support cables, allowed the oscillations to escalate uncontrollably, reaching destructive amplitudes.
The failure highlighted a critical oversight in the bridge's design, as it did not incorporate adequate measures to mitigate the effects of resonance. The omission of sophisticated mathematical tools for analyzing wave dynamics and resonance in structural engineering further underscored the limitations in understanding and predicting the complex interplay of forces. This incident spurred advancements in engineering practices, emphasizing the imperative of incorporating resonance considerations and meticulous mathematical modeling to enhance the structural integrity and resilience of bridges and similar constructions. The lessons learned from the Tacoma Narrows Bridge collapse have significantly influenced subsequent infrastructure projects, contributing to the evolution of engineering practices and the development of more robust and secure structures.
1. A _____ is a framework of ideas and assumptions that has been well tested and can be used to explain some set of observations and make predictions about the world
A. law
B. theory
C. ladder
D. focus
I think it is B but please help me
2. How can astronomers locate objects in the sky?
A. by using altitude and zenith
B. by using latitude and longitude
C. by using distance and compass directions
D. by using the celestial sphere and constellations
I dont have a clue with this one please help me
1. A B. Theory is a framework of ideas and assumptions that has been well tested and can be used to explain some set of observations and make predictions about the world.
Although "theory" is a concept that is always in discussion, the scientifics agree on some points. It must be logically composed of concepts, definitions, assumptions, and generalizations. Secondly, it's major function is to describe and explain, it is important to say that a theory is a general explanation that leads to basic principles. In the third place, a theory is heuristic because it stimulates and guides to further development of knowledge.
2. How can astronomers locate objects in the sky?
D. by using the celestial sphere and constellations
Astronomers locate objects in the sky in a very simillar way we locate places in a map. Instead of using latitude and longitude, they use declination and right ascension. This is based on the celestial sphere, an imaginary object that is created by asuming all objects in space are at the same distance. By doing this astronomers can determine a line of zero latitude and zero longitude and therefore locate precisely distant objects. They can use also constelations as references with this same method.
Question 2
Which of the following is an endothermic reaction?
Question 2 options:
dissolving sugar in water
iron rusting
campfire burning
ice melting
How does molecular shape affect polarity?
Answer: If the molecule is symmetric, the effect of polarity will cancel out
Explanation: Apex
Nitric acid can be produced by the reaction of gaseous nitrogen dioxide with water. 3 no2(g) + h2o(ℓ) −→ 2 hno3(ℓ) + no(g) if 854 l of no2 gas react with water, what volume of no gas will be produced? assume the gases are measured under the same conditions. answer in units of l.
Final answer:
To determine the volume of NO gas produced from 854 L of NO₂ gas reacting with water, the stoichiometry of the balanced reaction (3 NO₂(g) + H₂O(l) → 2 HNO₃(aq) + NO(g)) indicates a 3:1 ratio. Using this ratio, the calculated volume of NO gas produced is 284.67 L.
Explanation:
To calculate the volume of NO gas produced when 854 L of NO₂ gas react with water, we can use the stoichiometry of the balanced chemical equation:
3 NO₂(g) + H₂O(l) → 2 HNO₃(aq) + NO(g)
According to the equation, 3 moles of NO₂ produce 1 mole of NO. This ratio can be applied to the volumes of the gases involved, as they are both measured under the same conditions and thus follow the ideal gas law where volume is directly proportional to moles.
To find the volume of NO produced:
Determine the mole ratio from the chemical equation: 3 moles of NO₂ produce 1 mole of NO.
Use the mole ratio to find the volume ratio for NO₂ to NO, which is also 3:1.
Apply the volume ratio to the given volume of NO₂: 854 L of NO₂ × (1 mole NO / 3 moles NO₂) = 284.67 L of NO.
So, under the same conditions, the volume of NO gas produced would be 284.67 L.
Identify the oxidized substance, the reduced substance, the oxidizing agent, and the reducing agent in the redox reaction. mg(s)+cl2(g)⟶mg2+(aq)+2cl−(aq)
Magnesium is an oxidized substance (Mg). Substance Reduced: chlorine gas (Cl₂(g)). Chlorine gas (Cl₂(g)) is an oxidizing agent. Magnesium (Mg) is a reducing agent.
In the demonstrated redox reaction:
Cl₂(g) + Mg(s) →Mg₂⁺(aq) + 2Cl(aq).
These things can be found:
Magnesium (Mg) is the substance that oxidizes, losing electrons in the process. It transitions from its ionic form, Mg₂⁺(aq), to its elemental form, Mg(s). Therefore, the oxidized substance is magnesium (Mg).
Chlorine gas (Cl₂(g)) is the chemical that goes through reduction and obtains electrons. It transforms from its diatomic elemental form, Cl₂(g), to chloride ions, 2Cl(aq). As a result, the reduced substance is chlorine (Cl₂(g)).
Oxidizing Agent: The species that oxidizes another substance is known as an oxidizing agent. The oxidizing agent in this instance is chlorine gas (Cl₂(g)), which takes electrons from magnesium (Mg) during the process.
Reducing Agent: The species that results in the decrease of another substance is known as a reducing agent. Due to the fact that it provides electrons to chlorine gas (Cl₂(g)) during the reaction, magnesium (Mg) is the reducing agent in this instance.
So, to sum up:
Magnesium is an oxidized substance (Mg).
Substance Reduced: chlorine gas (Cl₂(g))
Chlorine gas (Cl₂(g)) is an oxidizing agent.
Magnesium (Mg) is a reducing agent.
To know more about Oxidizing Agent:
https://brainly.com/question/11952578
#SPJ3
How many grams of calcium chloride are needed to produce 1.50 g of potassium chloride? cacl2(aq) + k2co3(aq) → 2 kcl(aq) + caco3(aq) 1.12 g 2.23 g 0.896 g 4.47 g?
The calcium chloride needed to produce 1.5 grams of KCl is: 1.12 grams
Further explanationStoichiometry in Chemistry learn about chemicals mainly emphasizes quantitative, such as the calculation of volume, mass, number, which is related to numbers, molecules, elements, etc.
A reaction coefficient is a number in the chemical formula of a substance involved in the reaction equation. The reaction coefficient is useful for equalizing reagents and products.
In the reaction there are also manifestations of reagent substances namely gas (g), liquid (liquid / l), solid (solid / s) and solution (aqueous / aq).
Reactions that occur:
CaCl₂ (aq) + K₂CO₃ (aq) → 2 KCl (aq) + CaCO₃ (aq)
From the reaction equation above, the reaction coefficient shows the mole ratio of reagents and products
mol CaCl₂: moles of KCl = 1: 2
relative molecular mass KCl = 74.6
relative molecular mass of CaCl2 = 111
then the mole:
mole KCl = mass: relative molecular mass
mole KCl = 1.5 gram: 74.6
mole KCl = 0.020107
so that
mole CaCl₂ = 1/2. 0.020107
mole CaCl₂ = 0.0100535
So the mass of CaCl2 = mole x relative molecular mass
mass CaCl₂ = 0.0100535 x 111
mass CaCl₂ = 1.12 gram
Learn moremoles of water
https://brainly.com/question/1405182
grams of oxygen required
https://brainly.com/question/8175791
mass of copper required
https://brainly.com/question/1680090
Keywords: CaCl2, KCl, mole, mass, relative molecular mass
The mass calcium chloride needed is 1.12 g
The balanced equation for the reaction is illustrated below:
CaCl₂ + K₂CO₃ —> 2KCl + CaCO₃
Next, we shall determine the mass of CaCl₂ that reacted and the mass of KCl produced from the balanced equation.
Molar mass of CaCl₂ = 40 + (35.5×2)
= 40 + 71
= 111 g/mol
Mass of CaCl₂ from the balanced equation = 1 × 111 = 111 g
Molar mass of KCl = 39 + 35.5
= 74.5 g/mol
Mass of KCl from the balanced equation = 2 × 74.5 = 149 g
Thus,
From the balanced equation above,
111 g of CaCl₂ reacted to produce 149 g of KCl.
Finally, we shall determine the mass of CaCl₂ needed to produce 1.5 g of KCl as follow:
From the balanced equation above,
111 g of CaCl₂ reacted to produce 149 g of KCl.
Therefore, X g of CaCl₂ will react to produce 1.5 g of KCl i.e
X g of CaCl₂ = [tex]\frac{1.5 * 111}{149}[/tex]X g of CaCl₂ = 1.12 gThus, 1.12 g of calcium chloride, CaCl₂ is needed to produce 1.5 g of KCl.
Learn more: https://brainly.com/question/13143779
Static charges can be applied to neutral objects by friction, induction or conduction. What do all of these methods utilize to create this charge?
a.protons
b.electrons
c.heat energy
Write a balanced nuclear equation for the beta decay of protactinium
The balanced nuclear equation for the beta decay of protactinium is 231Pa → 231U + β- + ν. In this equation, a protactinium-231 nucleus decays into a uranium-231 nucleus through the emission of a beta particle (β-) and an electron neutrino (ν).
Explanation:The balanced nuclear equation for the beta decay of protactinium is:
231Pa → 231U + β- + ν
In this equation, a protactinium-231 nucleus decays into a uranium-231 nucleus through the emission of a beta particle (β-) and an electron neutrino (ν). The atomic number of the nucleus increases by one, from 91 to 92, due to the gain of a proton.
After measurements or observations are made in a scientific investigation, it is most appropriate to
After observations are made, it is crucial to record and present results properly, discuss findings, and formulate hypotheses for further testing in the scientific investigation process.
After measurements or observations are made in a scientific investigation, it's most appropriate to record your observations and present your results in a suitable format, such as tables and graphs. Discussing findings with group members is also important, coupled with formulating a relevant central idea. If a scientist develops a new idea based on their observations of nature, the next step would be to make a new hypothesis, which can then be tested through experiments.
As part of the scientific method, it's essential not to force data to fit a hypothesis. Instead, draw conclusions from the experiment results objectively. If data fits, you should repeat the experiment to verify results, or if it does not, conduct more background research and refine the hypothesis.
If the reactants of a reaction have one s and four o atoms, what will the products have?
Answer:
one S four O atoms
Explanation:
How many moles in 43 liters of co2 at stp?
Answer: wait im gonna search some info.
Explanation:I come back with an asnwer for you
What is the number of oxygen atoms in the ring portion of the haworth structure of glucose?
How many moles of Pb are required if 8 moles of PbCl2 are produced
A "fizz saver" pumps air under pressure into a soda bottle to keep gas from escaping. will this keep co2 in the soda bottle? explain your answer.
Answer:
yeah...what he/she said...lol
Explanation: I was going to say that anyways.....btw am i the only one who has a problem with chemistry right now??? I need a tutor right about now....like baddddd!!!!
What might be damaged by ionizing radiation? *
lead
paper
soft tissue
A condensation polymerization reaction produces a polymer and
1) H2
2) O2
3) CO2
4) H2O
Photosynthesis is an endothermic chemical reaction that forms sugars from carbon dioxide, water, and the sun's energy. Which of the following must be true of photosynthesis?
The reaction can take place only if energy is added.
The reactants are oxidized.
The photosynthesis reaction produces ions.
The molecular bonds in carbon dioxide are very weak.
Answer: The reaction can take place only if energy is added.
Explanation:
Exothermic processes are those processes in which heat is released and endothermic processes are those processes in which heat is absorbed.
Photosynthesis is a phenomenon in which green plants containing chlorophyll use sunlight as a source of energy to convert carbon dioxide and water to form glucose and oxygen.
Photosynthesis is the process used by plants, algae and certain bacteria to convert energy from sunlight and turn it into chemical energy in the form of glucose which is used a s a source of energy by many organisms.
[tex]6CO_2+6H_2O\overset{sunlight}\rightarrow C_6H_{12}O_6+6O_2[/tex]
Thus photosyynthesis reaction can take place only if energy is added.
Convert to standard
1.312x10^2
A wave has a wavelength of 12 mm and a frequency of 6 hertz. What is its speed?
What type of radioactive decay involves only the release of high-energy photons and therefore does not change the mass of an atom of a radioactive isotope?