A hypothesis is a testable and falsifiable assumption known before experimentation. It's not always correct and does not always change in response to a change in the independent variable. Even when experiments support a hypothesis, it is not confirmed as absolutely correct.
Explanation:A hypothesis is a testable and falsifiable assumption based on what is known. It is determined before any experiment begins and serves as a guide for the collection and analysis of data. For instance, we could formulate a hypothesis like, 'If I water plants with sugar-mixed water, they will grow faster.'. If subsequent experimentation disproves this hypothesis, it must be discarded or reformed.
A hypothesis does not necessarily change in response to a change in the independent variable; rather, it predicts the expected response or outcome. However, a hypothesis is not always correct. It represents our best prediction based on the current information and can often be proven wrong as new data or insights become available via further empirical research.
Furthermore, in scientific research, even though a hypothesis is supported by multiple experiments, it does not confirm it to be correct, as future experiments could contradict it. Also, if a hypothesis explains a large amount of experimental data it could be considered a theory, but even theories can be modified if new data appears.
Learn more about Hypothesis here:https://brainly.com/question/39619836
#SPJ12
What electron current is driven through a 2.3-mm-diameter iron wire by a 0.063 v/m electric field?
To calculate the electron current driven through the iron wire, we need to find the drift velocity and the number of free electrons per cubic meter. By using the formula I = nqAvd, we can calculate the current.
Explanation:The electron current driven through the iron wire can be calculated using the formula I = nqAvd. Given that the electric field is 0.063 V/m, we need to calculate two quantities: the drift velocity (vd) and the number of free electrons per cubic meter(n). We can then substitute these values into the equation to find the current (I).
To calculate the drift velocity (vd), we need to calculate the number of free electrons per cubic meter (n). We can use the density of iron (8.80 × 10³ kg/m³) and the atomic mass of iron (63.54 g/mol) along with Avogadro's number (6.02 × 10²³ atoms/mol) to determine n.
Finally, substituting the values of n, q, A, and vd into the equation I = nqAvd, we can calculate the electron current driven through the iron wire.
Learn more about Electric Current here:https://brainly.com/question/31802294
#SPJ12
The sound intensity of street traffic is about 107 times greater than the threshold of hearing. what is the relative intensity of street traffic? use the formula
A 9.0 cm object is 3.0 cm from a lens, which has a focal length of –12.0 cm.
Where in the motion is the magnitude of the net force on the object a maximum? where in the motion is the speed a maximum?
Homeowners will typically have their heaters set for about 140 degrees F. What is that temperature in C.
To convert 140 degrees Fahrenheit to Celsius, subtract 32 from the Fahrenheit temperature and multiply the result by 5/9, resulting in 60 degrees Celsius.
To convert a temperature from Fahrenheit to Celsius, we can use the formula: C = (F - 32) × 5/9, where F is the temperature in degrees Fahrenheit and C is the temperature in degrees Celsius. So, for a heater set to 140 degrees Fahrenheit, the conversion to Celsius would be:
C = (140 - 32) × 5/9
C = (108) × 5/9
C = 60
Therefore, 140 degrees Fahrenheit is equal to 60 degrees Celsius. This knowledge is essential when discussing the power needed to keep a house warm, as energy requirements are usually given in watts per degree Celsius (W/°C).
Which of the following is not a name of a scale for measuring temperature? A. Kelvin B. Celsius C. Absolute D. Fahrenheit
Answer:
Kelvin, Celsius, and Fahrenheit
Explanation:
Thunderstorms occur where warm, moist air has absorbed enough heat and moisture to be significantly __________ than the surrounding air.
What is the difference between faults and folds?
if an elephant has a mass of 2,000 kg, what is its weight on Earth? (1 point) A. 0.0049 N B. 204 N C. 19,600 N D. 43,100 N
Answer:
Option C is correct, 19,600N
Explanation:
An elephant has a mass of 2000kg, m=2000kgGravitational acceleration, g=9.8weight ?thus applying formula; W=mgputting values, W=2000×9.8=19600NWhat is gravitational acceleration?Gravitational acceleration (symbolized g) is a physics term that denotes the strength of a gravitational field. It's measured in meters per second squared ([tex]m/s^{2}[/tex]). 1 g is approximately 9.8 [tex]m/s^{2}[/tex] at the earth's surface.
hence, Option C is correct, 19,600N
https://brainly.com/question/13769294
#SPJ2
Jesse travels 3.0 meters east and then turns and travels 4.0 meters north. Which of the diagrams below illustrates his displacement?
Answers are in the diagram below.
Choose one.
And I will mark the right answer The Brainliest.
Answer: the Fourth diagram
Explanation: The fourth diagram shows movement from her origin with the arrows indicating her movement 3metres east, from where she turns north and walks 4 metres the arrows indicates that. The resultants 5meters indicates her return back to her starting point with the arrow pointing at the tail of the 3metres.
Identify the following as a suspension or a colloid. sand in water
the two main currents that affect the united states on the eat coast and west coast
Answer: The California Current and the Gulf Stream.
Explanation:The Gulf Stream is on the East coast it runs southward to northward While The California Current which is also a part of the North Pacific Gyre moves southward along the westward coast if America and ends off at the southward Baja California peninsula.
The California Current is a Pacific Ocean current.
Other Currents in America are Humboldt Current, the Canary Current, the Benguela Current, and the Somali Current.
Which of the following occurs in January when the earth is closest to the sun?
Final answer:
The correct option is A Perihelion. Perihelion is the event that occurs in January when the Earth is closest to the Sun, and it results in the Earth being approximately 91.5 million miles from the Sun.
Explanation:
The event that occurs in January when the Earth is closest to the Sun is called perihelion. This is the point in Earth's elliptical orbit where it is at the minimum possible distance from the Sun. The Earth reaches perihelion approximately around January 3rd, depending on the year, with a slight variation over time.
At perihelion, the Earth is about 91.5 million miles from the Sun, as opposed to during aphelion, the farthest point, when it is about 94 million miles away. During this time, despite the Earth receiving more heat from the Sun, the Northern Hemisphere experiences winter because of the axial tilt directing this hemisphere away from the Sun.
Over long periods, the dates of perihelion and aphelion gradually shift due to the precession of the Earth's orbit. This change can have significant climatic effects over geological timescales.
According to the law of conservation of energy, energy cannot be _____.
A. changed or destroyed
B. created and destroyed
C. created or destroyed
D. created and changed
Answer: B ; created and destroyed
Explanation:
According to the law of conservation of energy, energy can neither be created nor destroyed but can be converted from one form to another
Which simply means you can't create energy and at the same time you can't destroy it.
An energy can be converted from one form to another that is from potential energy to kinetic energy
There is no destruction of energy in such a process
The Law of Conservation of Energy states that energy cannot be created or destroyed. This means that the total amount of energy in a system remains constant. When energy appears to disappear, it has typically been converted to another form.
Explanation:According to the Law of Conservation of Energy, energy cannot be created or destroyed. This is a fundamental law in physics that states that the total amount of energy in an isolated system remains constant over time. For example, when a ball drops from a height, its potential energy is transformed into kinetic energy as it falls, but the total energy within the system (the ball and the Earth) doesn't change. Therefore, the correct answer is C: created or destroyed.
Learn more about Law of Conservation of Energy here:https://brainly.com/question/12050604
#SPJ5
Which mineral is hard and has the same color and streak
Final answer:
A hard mineral with the same color as its streak is likely a metallic mineral, with examples including hematite and galena. The streak test is performed using an unglazed porcelain plate to reveal the color of the mineral's powder form.
Explanation:
The mineral in question, which is hard and has the same color as its streak, could refer to one of the metallic minerals, as they often have a streak color that is indicative of their actual color. Examples include hematite, with a dark gray on hand-sample but a red-brown streak, or galena, which has a dark gray streak matching its dark gray appearance. To determine the streak color, one can perform a streak test by rubbing the mineral across an unglazed porcelain plate. This test is useful because the powder form of the mineral may show colors that are different from the bulk mineral due to the particle size affecting how light is absorbed and reflected.
Bob read data from the projectile motion lab graph shown and determined that the drop time was inversely proportional to the horizontal velocity. Which of the following statements is true?
Bob's conclusion was wrong because the x-axis scale is exaggerated.
Bob's conclusion was right because the data points were connected.
Bob's conclusion was wrong because the y-axis scale is exaggerated.
Bob's conclusion was right because the x-axis scale is exaggerated.,
Discuss how metallic bonding accounts for the common properties of metals
Particles in metals are strongly held by the intermolecular force called metallic bonds. This strong bonding make the metals hard, feasible to conduct thermally and electrically.
What are metals?Metals are electropositive elements in periodic table. The alkali metals, alkaline earth metals and transition metals compose the metallic elements. They all shows the metallic properties such as conductivity, malleability, ductility, luster etc.
Metal are consists of a sea of mobile electrons amidst the pool of positive ions. The metallic particles form a well ordered crystal lattice structure with metal ions connected by strong metallic bonds. The electrons can delocalize into the interstices and make the metal lattice conductive.
The close packed structure of metallic particles with free electrons make metals highly conductive both thermally and electrically. Moreover they exhibit color by the transition of electrons with absorption energy.
To find more on metals, refer here:
https://brainly.com/question/28650063
#SPJ2
How many atoms of each element are in the chemical formula P2O5?
2 phosphorus and 5 oxygen
5 phosphorus and 2 oxygen
1 phosphorus and 5 oxygen
2 phosphorus and 1 oxygen
the answer is the last one
Answer:
2 phosphorus and 5 oxygen
Explanation:
The chemical formula of the substance is:
[tex]P_2 O_5[/tex]
where each subscripts indicates the number of atoms of each element. We see that P (phosphorus) has a subscript '2' while O (oxigen) has a subscript '5', so the correct answer is
2 phosphorus and 5 oxygen
When the moon is directly opposite the sun in the sky, its phase is?
Andesitic rocks have mineral compositions between those of ____ and basaltic rocks.
a. conglomerate
c. granitic
b. metamorphic
d. organic
The answer is Granitic rock
Explanation:Granite is a light-colored igneous rock with pieces that are large enough to be visible with the naked eye. It is formed from the slow crystallization of magma below Earth's surface which we call as lava. Granite is composed mainly of quartz and feldspar with very small amounts of mica, amphiboles, and other minerals. If we talk about Andesitic rocks, they contain mineral compositions between those of granite and basaltic rocks.
to increase friction you could :
a.increase the mass of an object
b.put your objects on a wheel
c.make the surfaces smooth or slick
Before going to answer this question first we have to know something about friction.
Friction is the opposing force which is due to interlocking of irregularity and wielding effect.In our naked eye a surface may look smooth, but at microscopic level, it has elevations and depressions.
A rough surface has more friction as compared to a smoother surface as smoother surface has less irregularity.
Again we know that that rolling friction is less than sliding friction.so whenever the object will be placed on a wheel,so there will be less friction.
Again we know that the frictional force is directly proportional to the normal reaction.
The empirical formula for frictional force F= coefficient of friction × normal reaction[tex]i.e F=\mu*N[/tex]
so whenever the mass increases ,correspondingly there will be increment in normal reaction which results in the increment in kinetic friction.
But one thing we have to remember that friction is also dependent on contact area.As long as the contact area is same ,there will be no increment in friction due to increment in mass.
So the first answer is partially correct.
To find amplitude, measure _____.
A: the horizontal distance between consecutive crest positions
B: the horizontal distance between a consecutive crest and trough
C: the vertical distance from a crest to a trough
D: the vertical distance from a crest to the rest position
Never mind, use this for free points. I already answered it.
The amplitude of a wave is defined as the vertical distance from a crest (or trough) to the rest (equilibrium) position of the wave. Thus, to determine the amplitude, one must measure this vertical distance.
Explanation:The amplitude of a wave is the measure of the maximum displacement of the medium from its rest position. It can be seen as the 'height' of the wave, and it's measured vertically. If we consider a wave to be symmetrical, the crest (top of the wave) is distance +A above the equilibrium (resting) position, and the trough (bottom of the wave) is distance -A below it.
Thus, the amplitude refers to the vertical distance from a crest (or trough) to the rest position. In simpler terms, to find the amplitude, measure the vertical distance from a crest to the rest position. Hence, the correct answer is D: the vertical distance from a crest to the rest position.
Learn more about Amplitude here:https://brainly.com/question/8662436
#SPJ6
The energy emitted from the sun is a product of ________.
A dog travels north for 18 meters, east for 8 meters, South for 27 meters and then west for 8 meters. What is the distance the dog traveled and what is the displacement of the dog.
Answer:
Distance = 18 +8+ 27+8 =61
Displacement 27 - 18 = 9
Explanation:
A rock is thrown upward with an initial velocity of 16 ft/s from an initial height of 5 ft. write a quadratic function equation that describes the height h at time t.
The quadratic function equation that describes the height of the rock is h = -16t^2 + 16t + 5.
Explanation:To write a quadratic function equation that describes the height h at time t, we can use the kinematic equation for vertical motion: h = -16t^2 + 16t + 5. This equation represents the height of the rock as a function of time, taking into account the initial height, initial velocity, and acceleration due to gravity. The coefficient -16 in front of t^2 accounts for the downward acceleration of the rock.
What is the kinetic energy of the emitted electrons when cesium is exposed to uv rays of frequency 1.9×1015hz? express your answer in joules to three significant figures?
Final answer:
The kinetic energy of the emitted electrons when cesium is exposed to UV rays of frequency 1.9 × 10¹⁵ Hz is approximately 9.51 × 10⁻¹⁹ J.
Explanation:
To find the kinetic energy of the emitted electrons, we need to use the equation:
Kinetic Energy (KE) = Energy of the photon - Work Function
The energy of a photon can be calculated using the equation:
Energy (E) = Planck's constant (h) × frequency (f)
Given that the frequency of the UV rays is 1.9 × 1015 Hz, we can calculate the energy of the photon. The value of Planck's constant is 6.626 × 10-34 J·s.
Let's calculate the energy:
E = (6.626 × 10-34 J·s) × (1.9 × 1015 Hz) = 1.2594 × 10-18 J
Now we need to find the work function of cesium, which represents the minimum energy required to remove an electron from the metal. The work function of cesium is approximately 1.93 eV.
Converting the work function to joules:
1 eV = 1.602 × 10-19 J
1.93 eV = 1.93 × (1.602 × 10-19) J = 3.08786 × 10-19 J
Now we can calculate the kinetic energy:
KE = (1.2594 × 10⁻¹⁸ J) - (3.08786 × 10⁻¹⁹J) = 9.50712 × 10⁻¹ J
Therefore, the kinetic energy of the emitted electrons when cesium is exposed to UV rays of frequency 1.9 × 10¹⁵ Hz is approximately 9.51 × 10⁻¹⁹ J.
Read the scenario below and answer the question that follows.
Molly and Mark are new parents. Their daughter Alvina often cries when she is uncomfortable. Each time Alvina cries, her parents give her a stuffed rabbit. Eventually, Alvina looks at the rabbit and cries because she associates the rabbit with being uncomfortable.
What is the conditioned stimulus (CS) in this scenario? A. the rabbit B. Alvina being uncomfortable C. Alvina’s parents D. Alvina getting hungry
Answer:
A.
Explanation:
just took it on e2020
Match the type of boundary with its characteristic
The required relation is given in the figure below
ExplanationThere are three main types of plate boundaries:
Convergent boundaries: where two plates are colliding.Divergent boundaries – where two plates are moving apart. ... Transform boundaries – where plates slide passed each otherHow are important properties of Mercury, Venus, and Mars different from important properties of Earth?
Which statement describes what most likely occurs when a compass is placed next to a simple circuit made from a battery, a light bulb, and a wire?
A. A magnetic field created by the compass increases the current in the electrical circuit.
B. A magnetic field created by the compass causes the light bulb to stop working.
C. A magnetic field created by the electric current places negative charges on the compass.
D. A magnetic field created by the electric current causes the compass needle to move.
In this circuit A magnetic field created by the electric current causes the compass needle to move. hence option D is correct.
Faraday's law of induction ?Faraday's law states that "change in a magnetic field produces electric field in the circuit". It can also be stated as " when magnetic flux linked to a circuit changes, an electromotive force is induced in the circuit which is proportional to the rate of change of the flux".
If the wire shown in the circuit is non coated with insulated material. Current flowing through the circuit produces magnetic field around it. This produced magnetic field affects the magnetic field of middle of the compass. Created magnetic field of wire attract needle due to its magnetic field, as a result needle moves.
Hence option D is correct.
To know more about magnetic field click :
https://brainly.com/question/14848188
#SPJ2.