Soaps feel slippery on our hands because they dissolve the oil on our skin decreasing friction this is because soaps contain

Answer:

The correct name for the following compound is

2 - methylbicyclo[4.3.0]nonane

Explanation:

Rule 1

Numbering of bicyclic compound is done from bridgehead carbon

Rule 2

The system is numbered with one of the bridgeheads, numbering proceeding by the longest possible path to the second bridgehead.

Name of the given bicyclic compound is 2 - methylbicyclo[4.3.0]nonane

Answer:

see below

Explanation:

for A + 2B => Products ...

Rate Law => Rate =k[A][B]ˣ

As shown in expression, A & B are included, C is not.

Answer:

Exponent of a is 1, exponent of b is 2 and exponent of c = 0

Explanation:

or the rate equation is the expression which relates the rate of the reaction with the concentration of pressure of the reactants. The rate law is expressed in terms of the molar concentration of the reactants with each term raised to power its stoichiometric coefficient.

Answer:

The value of Ka [tex]= 1.1*10^{-2}[/tex]

It is a weak  acid

Explanation:

   From the question we are told that

             The concentration of [tex][HClO_2]=0.24M[/tex]

             The concentration of  [tex][H^+]=0.051M[/tex]

             The concentration of  [tex][ClO_2^-]=0.051M[/tex]

Generally the equation for the ionic dissociation of [tex]HClO_2[/tex] is

                [tex]HClO_2_(aq) -------> H^{+}_{(aq)} + ClO_2^{-}_{(aq)}[/tex]

The equilibrium constant is mathematically represented as

                         [tex]Ka = \frac{concentration \ of \ product }{concentration \ of \ reactant }[/tex]

                               [tex]= \frac{[H^+][ClO_2^-]}{[HClO_2]}[/tex]

Substituting values since all value of concentration are at equilibrium

                    [tex]Ka = \frac{0.051 * 0.051}{0.24}[/tex]

                          [tex]= 1.1*10^{-2}[/tex]

Since the value of  is less than 1 it show that in water it dose not completely

disassociated  so it an acid that is weak

Answer: S. Auresus

Explanation:I just took it

A microbiologist studies the microbes and the disease they cause. The bacterium that will be more responsive to antibiotic treatment will be Staphylococcus aureus.

Antibiotics are said to be the medication and drug class that works against bacterial infections. They are used to kill and slow the rate of growth or reproduction of microbes like bacteria to stop diseases or infections like flu, cold, cough, etc.

The bacteria can be resistant or susceptible to the antibiotic and can be tested by exposing them to antibiotics. As Staphylococcus aureus species are vulnerable they will not be able to grow under the antibiotic treatment. Whereas, Escherichia coli being resistant will show some growth.

Therefore, Staphylococcus aureus will be more responsive to antibiotics.

Learn more about antibiotics, here:

https://brainly.com/question/17988226

#SPJ6

Answer:

a. 0.8125 moles of sucrose

b. 277.8 g of sucrose

Explanation:

Consider these relation's value:

Molarity = Mol / Volume(L)

Mol = Molarity . Volume(L)

Volume(L) = Mol / Molarity

So, Molarity = 3.25M

Volume(L) = 0.25L

Molarity . Volume(L) = Mol → 3.25mol/L . 0.25L = 0.8125 mol

Let's convert the moles to mass → 0.8125 mol . 342 g /1mol = 277.8 g of sucrose

Answer:

We have 0.8125 moles sucrose in this solution. This is 277.9 grams of sucrose

Explanation:

Step 1: Data given

Molarity of a sucose solution = 3.25 M

Molar mass of sucrose = 342 g/mol

Step 2:  Calculate moles sucrose

Moles sucrose = molarity sucrose solution * volume solution

Moles sucrose = 3.25 M * 0.25 L

Moles sucrose =  0.8125 moles sucrose

Step 3: Calculate mass of sucrose

Mass sucrose = moles sucrose * molar mass sucrose

Mass sucrose = 0.8125 moles * 342 g/mol

Mass sucrose = 277.9 grams

We have 0.8125 moles sucrose in this solution. This is 277.9 grams of sucrose

Final answer:

In a galvanic cell, half-reactions occur at separate electrodes: reduction at the cathode and oxidation at the anode. The cathode is the positive electrode, while the anode is the negative electrode. Standard cell potential can be calculated but requires the standard reduction potentials for the specific half-reactions.

Explanation:

Galvanic Cell Half-Reactions, Electrodes, and Potentials

In a galvanic cell, a spontaneous redox reaction occurs that drives the flow of electrons from the anode to the cathode through an external circuit. The original question does not provide a complete redox reaction, but assuming it involves bromine (Br2), hydrogen (H2), and hydroxide ions (OH-), the following can be considered:

For the provided redox reaction, the half-reaction that occurs at the cathode (reduction) might be:

2H+ + 2e- → H2

And the half-reaction at the anode (oxidation) could be:

2Br- → Br2 + 2e-

The cathode is the positive electrode, as it undergoes reduction, and the anode is the negative electrode, as it undergoes oxidation. Without actual potential values given, the cell voltage under standard conditions cannot be calculated here. However, the standard cell potential can be found by using standard reduction potential tables and subtracting the anode potential from the cathode potential.

Answer:

the reported molar concentration of the sodium hydroxide solution will be too high.

Explanation:

The term "standardization" in science or in analytical Chemistry simply means the process involved in the determination of a standard or the concentration of a particular substance.

One of the advantages and the most important of the advantages of Standardization is that it Helps in making sure that we get a result with the least error.

So, let me explain the answer. The reported molar concentration of the sodium hydroxide solution will be TOO HIGH because the potassium hydrogen phthalate is NOT completely dry. The weight of the moisture will create an additional weight which will increase the weight of potassium hydrogen phthalate in the solution

If potassium hydrogen phthalate is not completely dry, it will make the reported molar concentration of the sodium hydroxide solution too low. This is due to the added water from the moisture which causes a dilution effect.

In the situation where the potassium hydrogen phthalate is not completely dry, the reported molar concentration of the sodium hydroxide solution will be too low. This is because the water from the phthalate's moisture can dilute the sodium hydroxide solution, which leads to a lower than actual molar concentration. It's essential to have a completely dry potassium hydrogen phthalate when standardizing sodium hydroxide solutions to get an accurate molar concentration.

For instance, when potassium hydroxide, a highly soluble ionic compound, is dissolved in a dilute solution, it completely dissociates, giving a certain concentration of [OH-] ions. Suppose this reaction occurs in an environment where excess water is introduced due to the moisture in potassium hydrogen phthalate. In that case, this equilibrium will be affected, leading to a lower concentration of hydroxide ions and thus, a lower reported molar concentration of the sodium hydroxide solution.

https://brainly.com/question/16038856

#SPJ12

Answer:

Thermal decomposition

Explanation:

Calcium carbonate can be broken  down by heating. The following equation represents this chemical change.

CaCO₃(s) ⇒ CaO(s) + CO₂(g)

The scientific term for this process is thermal decomposition.

The breakdown of calcium carbonate by heating is called thermal decomposition. This process involves a single substance breaking down into simpler compounds upon heating. The process is demonstrated in the reaction - CaCO3 (s) -> CaO(s) + CO2 (g), where calcium carbonate decomposes into calcium oxide and carbon dioxide.

The process of breaking down Calcium Carbonate (CaCO3) by heating is scientifically known as Thermal Decomposition. This is a chemical process where a single substance breaks down into two or more simpler substances when heated. To demonstrate this, let's use the following reaction:

CaCO3(s) → CaO(s) + CO2(g)

In this instance, calcium carbonate (which can come from limestone or chalk) decomposes into calcium oxide and carbon dioxide when heated. It's important to note that the reaction is reversible and to ensure a 100% yield of CaO, the CO2 should be allowed to escape.

Learn more about Thermal Decomposition here:

https://brainly.com/question/32788677

#SPJ3

Answer:

4.95×10^22 atoms of hydrogen.

Explanation:

Now, we must remember that the number of elementary entities in one mole of a substance (atoms, molecules, ions,etc) is given by the Avogadro's number. Avogadro's number is numerically equal to 6.02×10^23.

We must first find the number of moles of hydrazine corresponding to 2.65 g

We find that from;

Number of moles= mass of hydrazine given/ molar mass of hydrazine

Molar mass of hydrazine= 32.0452 g/mol

Number of moles of hydrazine= 2.65/32.0452 g/mol= 0.0823 moles

If 1 mole of hydrazine contains 6.02×10^23 hydrogen atoms

0.0823 moles of hydrazine will contain 0.0823 moles × 6.02×10^23 = 4.95×10^22 atoms of hydrogen.

The given question is incomplete. The complete question is:

Aqueous hydrochloric acid (HCl) reacts with solid sodium hydroxide (NaOH) to produce aqueous sodium chloride (NaCl) and liquid water (H2O). If 1.60 g of sodium chloride is produced from the reaction of 1.8 g of hydrochloric acid and 1.4 g of sodium hydroxide, calculate the percent yield of sodium chloride. Be sure your answer has the correct number of significant digits in it.

Answer: Thus the percent yield of sodium chloride is 78.0%

Explanation:

To calculate the moles :

[tex]\text{Moles of solute}=\frac{\text{given mass}}\times{\text{Molar Mass}}[/tex]    

[tex]\text{Moles of} HCl=\frac{1.8g}{36.5g/mol}=0.049moles[/tex]

[tex]\text{Moles of} NaOH=\frac{1.4g}{40g/mol}=0.035moles[/tex]

[tex]HCl(aq)+NaOH(aq)\rightarrow NaCl(aq)+H_2O(l)[/tex]

According to stoichiometry :

1 mole of [tex]NaOH[/tex] require = 1 mole of [tex]HCl[/tex]

Thus 0.035 moles of [tex]NaOH[/tex] will require=[tex]\frac{1}{1}\times 0.035=0.035moles[/tex] of [tex]HCl[/tex]

Thus [tex]NaOH[/tex] is the limiting reagent as it limits the formation of product and [tex]HCl[/tex] is the excess reagent.

As 1 mole of [tex]NaOH[/tex] give = 1 mole of [tex]NaCl[/tex]

Thus 0.035 moles of [tex]NaOH[/tex] give =[tex]\frac{1}{1}\times 0.035=0.035moles[/tex]  of [tex]NaCl[/tex]

Mass of [tex]NaCl=moles\times {\text {Molar mass}}=0.035moles\times 58.5g/mol=2.05g[/tex]

[tex]{\text {percentage yield}}=\frac{\text {Experimental yield}}{\text {Theoretical yield}}\times 100\%[/tex]

[tex]{\text {percentage yield}}=\frac{1.60g}{2.05g}\times 100\%=78.0\%[/tex]

Thus the percent yield of sodium chloride is 78.0%

Answer:Neptunium; Protactinium; Thorium; Uranium

Explanation:

Answer:

1.45 *10^23 atoms C

Explanation:

3.50 g butane * 1 mol butane/58.1 g butane =0.06024 mol butane

in 1 mol C4H10           -------- 4 mol C

in 0.06024 mol C4H10 -------- 4*0.6024 = 0.241 mol C

0.241 mol C * 6.02*10^23 atoms C/1 mol C = 1.45 *10^23 atoms C

Answer: A

Explanation:

Hydrolysis reactions break down not only feldspars but many other silicate minerals as well, amphiboles, pyroxenes, micas, and olivines.

Answer:

c. Z is a catalyst, and ZA2 and A are reaction intermediates.

Explanation:

Overall reaction is given as;

A2 + 2 B → 2 BA

Mechanism:

Step 1: A2 + Z → ZA2

Step 2: ZA2 + B → BA + Z + A

Step 3: A + B → BA

The options given are centered upon catalysts and reaction intermediates. So before proceeding, we have to understand the difference between the two and how to identify them.

A catalyst is basically a reaction booster to speed up the rate of the reaction and the reaction intermediate is an unstable, temporl species formed from the reactants before getting to the products.

The difference is given as;

Catalysts are present as reactants in the very beginning and products at the end of the reaction.

Intermediates, on the other hand, are not present in the initial reaction but are produced within one of the steps and then consumed within another step.

Following the above, we can deduce that;

Z is a catalyst because it is present as a reactant in the beginning.

ZA2 and A are a reaction intermediates because they are not present in the overall reaction but are produced and consumed in one of the steps.

Correct option is given as;

c. Z is a catalyst, and ZA2 and A are reaction intermediates.

Answer:

Combustion

Explanation:

Combustion reactions are the one where the oxygen is a reactant and the products are always water and carbon dioxide.

It is also a redox type because the oxygen is reduced and the carbon from the C₄H₁₀O oxidized to CO₂

C₄H₁₀O + 6O₂ → 4CO₂ + 5H₂O

1 mol of butyl alcohol burns in prescence of 6 moles of oxygen in order to produce 4 moles of carbon dioxide and 5 moles of water.

Answer:

This is a combustion reaction

Explanation:

Step 1: Data given

A single-replacement reaction is a reaction where we will replace one element with a similar element in the compound.

A single-replacement or displacement reaction has the following form:

A+BC→AC+B

Element  A  is usually a metal and will replace element  B in the compound , this should also be a metal.

If the elemnent isn't a metal ( so a nonmetal), the replacing element will either be a metal.

In a double-replacement reaction we will exchange positive and negative ions of two ionic compounds, what will cause the formation of two new compounds.

A double-replacement reaction has the following form:

AB+CD→AD+BC

IIn this example,  A  and  C  are positively-charged ions (cations), and   B  and  D  are negatively-charged ions (anions).

In a decomposition reaction a compound will break down into two or more substances ( those are smaller, more simple).

A decomposition reaction uses the following form.

AB→A+B

In a combustion reaction a substance will react with oxygen gas (O2). Oxygen gas is needed to start the reaction.CO2 gas and water vapor (H2O) will be produced.

In a combination reaction we will combine two or more substances to form a single new substance. This is also known as a synthesis reaction, and uses the general form:

A+B→AB

Step 2: The equation

C4H10(g) + 6O2(g) → 4CO2(g) + 5H2O(g)

Step 3: What kind of reaction is this

Since the reaction requires oxygen and will produce carbon dioxie and water vapor. This means this reaction is a combustion reaction.

(Combustion of butane).

Answer:

The proposed mechanism is shown on the first uploaded image

Explanation:

Answer:

The answer to the question above is explained below

Explanation:

There are so many differences between the two ecosystem (terrestrial ecosystems and aquatic ecosystems). The most important ones will be highlighted:

1. Aquatic environments are so rich in nutrients they support more live than equivalent terrestrial ecosystems as aquatic ecosystems have availability of water more than the terrestrial ecosystems. Presenting the consequent importance of water as a limiting factor in the terrestrial ecosystems.

2. Aquatic ecosystems are much more stable than terrestrial ecosystems, with smaller fluctuations in temperature and other variables.

3. In terrestrial ecosystems, there is hardly ever a shortage of light, while it can be a limiting factor in some aquatic ecosystems.

4. Gravity has so much influence on terrestrial animals. That is not the case for their aquatic counterparts where water supports aquatic organisms.

An ecosystem is a large community of living organisms (plants, animals and microbes) in a particular area in conjunction with the non-living components of their environment, interacting as a system.

Terrestrial Ecosystem includes: Grasslands, Forests, Desert.

Aquatic Ecosystem includes: Freshwater ecosystem, Marine Ecosystem.

Answer:

Order of increasing ionic radius starting from the smallest is

Mg2+ < Na+ < F- < O2- < N3-

Explanation:

Ionic radius is the distance between the nucleus and the electrons in the outermost shell of an ion. In the ions given about, it can be deducted that they all have the same number of electrons and are said to be isoelectronic. This shows us that they all have the same electrons and we can only seperate them by checking the respective charges on the ions. A more positive charge will have a smaller radius while a more negative will have a larger radius. This is because when an atom loses an electron and form a cation (+), the remaining electrons move closer to the nucleus and hence a smaller radius of the atom occurs. But when an atom gains n electron,it forms anion (-), the new electron leads to the shielding of the remaining electrons from the nucleus and a large radius of the atom occurs.

So therefore, the above ions all have 10 electrons in their shells and magnesium with atomic number 12 and having lost 2 electrons to become positively charge has the smallest radius compared to others.

Mg2+ = 12 protons, 10 electrons

Na+ = 11 protons, 10 electrons

F- = 9 protons, 10 electrons

O2- = 8 protons, 10 electrons

N3- = 7 protons, 10 electrons

N3- has the largest ionic radius and Mg2+ has the lowest ionic radius.

The order is thus, Mg2+ , Na+, F-, O2-, N3-

The order of increasing ionic radius is N3-, O2-, F-, Na, Mg2+

The ionic radius is a measure of the size of an ion. In general, ions with more electrons have larger radii. Let's arrange the ions in order of increasing ionic radius:

The larger the negative charge on an ion, the larger its ionic radius. Therefore, N3- has the smallest radius, followed by O2-, F-, Na, and finally Mg2+, which has the largest radius among the given ions.

https://brainly.com/question/33300977

#SPJ6

Explanation:

1. When sodium phosphate is added to copper (II) sulfate it gives solid precipitate of copper(II) phosphate and solution of sodium sulfate.

The balanced equation is given as:

[tex]2Na_3PO_4(aq)+3CuSO_4(aq)\rightarrow Cu_3(PO_4)_2(s)+3Na_2SO_4(aq)[/tex]

2. When sodium phosphate is added to iron(III) chloride it gives solid precipitate of iron (III) phosphate and solution of sodium chloride.

The balanced equation is given as:

[tex]Na_3PO_4(aq)+Fe(Cl)_3(aq)\rightarrow FePO_4(s)+3NaCl(aq)[/tex]

Answer:

Low molecular weight carboxylic acids are volatile.

One should use caution when handling low molecular weight carboxylic acids.

Final answer:

Low molecular weight carboxylic acids are volatile and can have strong odors. They are not completely safe for handling without protection due to possible irritation from the vapors. Therefore, caution and appropriate safety measures are necessary when handling these substances.

Explanation:

Low molecular weight carboxylic acids tend to be volatile, implying they can easily vaporize at room temperature, and often have strong, sharp odors. One commonly known example is ethanoic acid (acetic acid), which is found in household vinegar. While they are usually colorless and can be found in everyday products such as foods and household items, it is not accurate to say that they are completely safe and can be handled without protection. The vapors of low molecular weight carboxylic acids can be irritating and, in some cases, harmful if inhaled in large amounts. Therefore, caution should be used when handling these substances.

Carboxylic acids are weak acids that do not completely ionize in water. This characteristic makes them less dangerous than strong acids; however, they can still cause irritation and should be treated with respect in a laboratory setting. Carboxylic acids such as propionic acid, while not highly toxic, can still pose safety risks if not handled properly, reinforcing the need for appropriate safety measures such as gloves and eye protection when handling these compounds.

Answer:

see below

Explanation:

The rate constant is missing in question, but use C(final) = C(initial)e^-kt = 0.200M(e^-k·10). Fill in k and compute => remaining concentration of reactant

Answer:

C(initial)e^-kt = 0.200M(e^-k·10).

Explanation:

The rate constant is missing in question, but use C(final) = C(initial)e^-kt = 0.200M(e^-k·10).

Fill in k and compute => remaining concentration of reactant

Answer:

2) ΔS°rxn is positive, and the process is spontaneous at high temperatures only.

Explanation:

ΔS = ΔH / T , ΔS is change in entropy , ΔH is change in enthalpy

Since ΔH is positive , ΔS is positive .

ΔG = ΔH - TΔS

For spontaneous reaction . ΔG should be negative .

As ΔS is positive , at high temperature the value of TΔS will be more and hence the value of TΔS will be higher than Δ H . Hence ΔG will be negative.

Hence at higher temperature , the reaction will be spontaneous.

The predicted sign of ΔS°rxn and the conditions under which this reaction would be spontaneous should be option  2) ΔS°rxn is positive, and the process is spontaneous at high temperatures only.

We know that

ΔS = ΔH / T

Here ΔS means a change in entropy

And, ΔH means a change in enthalpy

Since ΔH is positive so  ΔS is positive.

Now

ΔG = ΔH - TΔS

However, For spontaneous reaction. ΔG should be negative .

Since ΔS is positive, at high temperature the value of TΔS should be more and due to this the value of TΔS will be more than Δ H . Thus,  ΔG will be negative.

Learn more about temperature here: https://brainly.com/question/16559442

Answer:

26 g

Explanation:

Write the balanced reaction first

CH4 + 2 O2 --> CO2 + 2 H2O

9.3g + 52.3g --> ? CO2

You must determine how much carbon dioxide can be made from each of the reactants. The maximum mass that can be made is the lower of the two.

From CH4:

9.3g CH4 (1molCH4/16.05gCH4) (1molCO2 / 1molCH4) (44.01g CH4 / 1molCO2) = 26 g

From O2:

52.3g O2 (1molO2/32gO2) (1molCO2/2molO2)(44.01g/1molCO2) = 36 g

Answer:

the pH of HCOOH solution is 2.33

Explanation:

The ionization equation for the given acid is written as:

[tex]HCOOH\leftrightarrow H^++HCOO^-[/tex]

Let's say the initial concentration of the acid is c and the change in concentration x.

Then, equilibrium concentration of acid = (c-x)

and the equilibrium concentration for each of the product would be x

Equilibrium expression for the above equation would be:

[tex]\Ka= \frac{[H^+][HCOO^-]}{[HCOOH]}[/tex]

[tex]1.8*10^-^4=\frac{x^2}{c-x}[/tex]

From given info, equilibrium concentration of the acid is 0.12

So, (c-x) = 0.12

hence,

[tex]1.8*10^-^4=\frac{x^2}{0.12}[/tex]

Let's solve this for x. Multiply both sides by 0.12

[tex]2.16*10^-^5=x^2[/tex]

taking square root to both sides:

[tex]x=0.00465[/tex]

Now, we have got the concentration of [tex][H^+] .[/tex]

[tex][H^+] = 0.00465 M[/tex]

We know that, [tex]pH=-log[H^+][/tex]

pH = -log(0.00465)

pH = 2.33

Hence, the pH of HCOOH solution is 2.33.

Answer:

The correct answer is 2.34

Explanation:

HCOOH is formic acid. It is a weak acid so it does not dissociates completely in water. At the beggining (I) the initial concentration is 0.12 M. In water it will dissociate in a certain grade x as follows:

          HCOOH    →    H⁺ + HCOO⁻

I             0.12 M           0          0                    

C           - x                   x          x

E          (0.12 M - x)       x          x

The mathematical expression for the equilibrium constant (Ka) is the following:

[tex]K_{a} = \frac{[H^{+} ][HCOO^{-} ]}{[HCOOH]}[/tex]

[tex]1.8 x 10^{-4} = \frac{(x x)}{(0.12 M -x)}[/tex]

As the value of Ka is too small in comparison with the initial concentration 0.12 M, we can approximate: 0.12 M - X ≅ 0.12 M. Then, we calculate x:

1.8 x 10⁻⁴ = x²/0.12 M

⇒ x= [tex]\sqrt{0.12 x 1.8 x 10^{-4} }[/tex]= 4.65 x 10⁻³

Since x = 4.65 x 10⁻³ , from the equilibrium we have:

[H⁺] = x = 4.65 x 10⁻³

From the definition of pH, we have:

pH = -log [H⁺] = -log (4.65 x 10⁻³)= 2.34

Answer:

The pH shifts less with small additions of titrant near the equivalence point.

Explanation:

Explanation:

In an acid-base titration, the titration curve reflects the strengths of the corresponding acid and base.

If one reagent is a weak acid or base and the other is a strong acid or base, the titration curve is irregular, and the pH shifts less with small additions of titrant near the equivalence point.

Acid-base titrations depend on the neutralization between an acid and a base when mixed in solution.

The endpoint and the equivalence point are not exactly the same: the equivalence point is determined by the stoichiometry of the reaction, while the endpoint is just the color change from the indicator.

Answer:

A rapid reaction is distinguished by having a relatively small value of activation energy.

Explanation:

Chemical kinetics is involved in determining the rate of a reaction, how fast or slow a reaction will occur in a particular condition. The factors affecting the rate of reaction determining whether it will be a rapid reaction includes nature of the reactants, temperature, pressure, surface area of solid state, catalysts, concentration and so on. Based on temperature, temperature affects the collision frequency of a reaction and this contributes to a portion of the increased rate of reaction. At a given temperature, the rate of  a reaction depends on the magnitude of the activation energy, pre-exponential factor A, molar gas constant, R, and temperature. This is true based on the Arrhenius equation K = Ae^-Ea/(RT). So therefore, from the equation, it is revealed that at small activation energies, reaction rate is rapid and slow at high activation energies.

Final answer:

A rapid reaction is characterized by a low activation energy, which allows for a faster reaction rate. Catalysts can lower this energy barrier, further speeding up the reaction without altering the overall energy change of the reaction.

Explanation:

A rapid reaction is distinguished by having a small value of activation energy. Activation energy (Ea) is the barrier that must be overcome for reactants to transform into products. A low activation energy indicates that the reactants can more easily reach the transition state and react to form products, leading to a faster reaction rate.

Catalysts are substances that lower the activation energy and provide a new pathway for the reaction to occur, thus speeding up the reaction without being consumed in the process. They do not affect the overall energy change of the reaction (∆H), but they make it easier for the reaction to occur.

This is especially valuable in biological systems where catalysis allows for important cellular reactions to occur at appreciable rates without the need for high temperatures that could harm the cell.

It is the heat of the reaction (∆H) that determines whether a reaction is exothermic or endothermic, not the activation energy.

Therefore, whether a reaction has a large heat of reaction or a small heat of reaction does not directly relate to its speed.

The new volume of the Cl2 gas under the conditions at the bottom of Hellas Planitia on Mars would be approximately 4.2 litres, as calculated using the ideal gas law.

The question is asking about the adjustment of gas volume under different conditions of pressure and temperature, so the ideal gas law is applicable here which states that: PV = nRT, where P is pressure, V is volume, T is temperature, n is number of moles of the gas and R is gas constant.

At Standard Temperature and Pressure (STP), the conditions are 1 atm pressure and 0°C (273 K). Please note that the volume given is already at STP, so to find the new volume, we should rearrange the ideal gas law to V2 = V1 * P1/P2 * T2/T1.

However, note that all the measurements need to be in the same standard units. Here, the initial pressure (P1) is 1 atm, converted to kPa becomes approximately 101.3 kPa, the final pressure (P2) is given as 1.16 kPa. The initial temperature (T1) is 273K and the final temperature (T2) needs to be converted from Celsius to Kelvin, making it 268 K (-5°C + 273). Thus, applying the equation, we get:

V2 = 0.175L * 101.3 kPa / 1.16 kPa * 268 K / 273 K = 4.2 L approximately

Therefore, the new volume of the Cl2 gas, if it is transported to the conditions at the bottom of Hellas Planitia on Mars, would be approximately 4.2 litres.

https://brainly.com/question/30458409

#SPJ12

Using the combined gas law, the new volume of Cl₂ gas at 1.16 kPa pressure and -5.0°C temperature at the bottom of Hellas Planitia on Mars is calculated to be approximately 15.06 liters.

To determine the new volume of Cl₂ gas at the conditions provided, we need to use the combined gas law which is given by the equation: [tex]\frac{P_1 \times V_1}{T_1} = \frac{P_2 \times V_2}{T_2}[/tex], where P is pressure, V is volume and T is temperature in Kelvin.

At STP (Standard Temperature and Pressure), we have a volume of 175 mL (or 0.175 liters), a pressure of 101.3 kPa, and a temperature of 273.15 K. The conditions at the bottom of the Hellas Planitia are 1.16 kPa and -5.0°C or 268.15 K.

First, we convert the initial volume into liters: 175 mL = 0.175 L.
Next, we rearrange the combined gas law to solve for V₂:

Therefore, the new volume of Cl₂ gas at the bottom of Hellas Planitia will be approximately 15.06 liters.

Answer:The general properties of matter such as color, density, hardness, are examples of physical properties. Properties that describe how a substance changes into a completely different substance are called chemical properties. Flammability and corrosion/oxidation resistance are examples of chemical properties.

Explanation: