Sulfur reacts with oxygen to form sulfur dioxide (so2(g), hf = –296.8 kj/mol) according to the equation below. what is the enthalpy change for the reaction? use . –593.6 kj –296.8 kj 296.8 kj 593.6 kj

Answer is: pH = 8,046.
c(H₃O⁺) = 4·10⁻⁹ M = 4·10⁻⁹ mol/L = 0,000000004 mol/L.
pH = -logc(H₃O⁺).
pH = -log(4·10⁻⁹ mol/L).
pH = -(-8,046) = 8,046.
When pH is less than seven (pH<7), solution is acidic.
When is equal seven (pH = 7), solution is neutral.
When pH is greater than seven (pH > 7), solution is basic (like this example).

The pH of a 0.1 M solution of baking soda is calculated using the formula pH = -log[H+] and is approximately 8.4, indicating a slightly basic solution. Baking soda is a weak base and reacts with acids to produce CO₂, making baked goods light and fluffy.

To calculate the pH of a 0.1 M solution of baking soda (NaHCO₃), you need to use the formula for pH calculation:

pH = -log[H⁺]

Given that the [H+] (or [H₃O⁺]) concentration is 4.0 X 10⁻⁹, the calculation would be as follows:

pH = -log(4.0 X 10⁻⁹)
pH ≈ 8.4

This indicates that the solution is slightly basic, which aligns with baking soda's properties as a weak base.

Answer:

D. Moles of solute/liters of solution

Explanation:

Answer:

tertiary

Explanation:

Answer : The condition in which precipitation reaction can occur in any aqueous chemical reaction is when the cations of one reactant and the anions of other reactant reacts in aqueous solutions forms an insoluble ionic solid, which is called as "Precipitate".

It is widely known that most of precipitation reactions are formed in a double-replacement reaction. Where one element is displaced by another element of higher reactivity.

Final answer:

A precipitate forms in an aqueous reaction when cations and anions combine to create an insoluble solid, as determined by solubility rules. An example is the reaction between potassium iodide and lead (II) nitrate forming lead (II) iodide. Precipitation reactions are critical both in natural processes and the chemical industry.

Explanation:

Conditions for Precipitate Formation

Precipitates form in aqueous chemical reactions when cations and anions from different compounds combine to create an insoluble ionic solid. This often occurs during what is known as a double-replacement reaction. To determine if a reaction will produce a precipitate, one must consult the solubility rules which provide guidelines about the solubility of various ionic compounds in water.

For example, when aqueous solutions of potassium iodide and lead (II) nitrate are mixed, a precipitation reaction takes place due to the formation of lead (II) iodide, an insoluble solid:

The driving force behind such reactions is the creation of an insoluble compound that precipitates out of the solution. These reactions are not only significant in natural processes, like the formation of coral reefs and kidney stones but are also extensively utilized in the chemical industry and in analytical techniques like gravimetric analysis and spot tests.

Mercury, as it is present in a thermometer, is classified as a pure substance. It's an element denoted by Hg on the periodic table with a constant composition and properties.

The mercury that we find in a thermometer is considered a pure substance rather than a mixture. A pure substance is a form of matter that has a constant composition and properties that are definite throughout the sample. It includes elements and compounds.

Mercury, denoted as Hg on the periodic table, is an element. Therefore, it doesn't consist of different substances mixed together. Its properties, like boiling point and density, remain constant.

https://brainly.com/question/34698296

#SPJ6

Final answer:

A solution that cannot dissolve any more solute is called a saturated solution. Saturated solutions have reached the maximum concentration of solute that can be dissolved under given conditions. The correct option choice is B: Saturated.

Explanation:

The word used to describe a solution that cannot dissolve any more solute because it has reached its capacity is saturated. A saturated solution has reached the maximum concentration of solute that can dissolve at given conditions. Conversely, an unsaturated solution contains less solute than it can dissolve, which means more solute can be added and dissolved. It's also important to note that a saturated solution can have varying degrees of concentration; some may be dilute if they contain a small amount of solute relative to the solvent, while others may be concentrated with a larger amount of solute.

Answer:

68 grams is the maximum amount of KCl that can be dissolve in 200 g of water.

Explanation:

Let the maximum amount of KCl dissolved in water be x

Solubility of KCl in water = 34g /100 g

This means that  34 g of KCl can be dissolved in 100 g of water at 20°C

Maximum amount of KCl dissolved in  1 g of water = [tex]\frac{34}{100} g[/tex]

Maximum amount of KCl dessolbved in 200 g of water :

[tex]\frac{34}{100}\times 200=68 g[/tex]

68 grams is the maximum amount of KCl that can be dissolve in 200 g of water.

The correct answer is the D which 2,1,2,1.

2NaBr + CaF2 → 2NaF + CaBr2

Answer : The amount of heat released is, -1602.36 KJ

Explanation : Given,

Moles of NaOH = 3.600 mole

Molar heat of solution of NaOH = -445.1 KJ/mole

Now we have to calculate the amount of heat released.

As, 1 mole of NaOH is dissolved in water then heat released = - 445.1 KJ

So, 3.600 mole of NaOH is dissolved in water then heat released = [tex]-445.1\times 3.600=-1602.36KJ[/tex]

Therefore, the amount of heat released is, -1602.36 KJ

Answer: The mass of sucrose is 34.23 g

Explanation:

Molarity is defined as the number of moles present in one liter of solution.

Mathematically,

[tex]\text{Molarity of the solution}=\frac{\text{Moles of solute}}{\text{Volume of solution (in L)}}[/tex]

Or,

[tex]\text{Molarity of the solution}=\frac{\text{Mass of solute}\times 1000}{\text{Molar mass of solute}\times \text{Volume of solution (in mL)}}[/tex]

We are given:

Molarity of solution = 0.200 M

Molar mass of sucrose = 342.3 g/mol

Volume of solution = 500 mL

Mass of sucrose = ? g

Putting values in above equation, we get:

[tex]0.200mol/L=\frac{\text{Mass of sucrose}\times 1000}{342.3g/mol\times 500mL}\\\\\text{Mass of sucrose}=34.23g[/tex]

Hence, the mass of sucrose is 34.23 g

Final answer:

Methane (CH4) contains non-polar covalent bonds between its carbon and hydrogen atoms, forming a tetrahedral molecular structure with evenly distributed electron sharing due to sp³ hybridization.

Explanation:

Methane, also known by its chemical formula CH4, is a compound composed of carbon and hydrogen atoms. The bonds between a carbon atom and hydrogen atoms in methane are covalent bonds. Specifically, these are non-polar covalent bonds because the carbon atom, which has four electrons in its outermost valence energy shell, shares a single electron with each of the four hydrogen atoms, which have one valence electron in their first energy shell. The electron distribution is equal among the bonds, resulting in a molecule with a tetrahedral geometry where the carbon atom exhibits sp³ hybridization and serves as the center of the tetrahedron while the hydrogen atoms are located at the corners.

When a strong acid is added to a buffer containing ammonia and ammonium chloride, the ammonia reacts with the acid, neutralizing it and creating ammonium. The remaining ammonium chloride then contributes additional ammonia to maintain the buffer's pH.

The buffer contains both ammonia and ammonium chloride, which represent a weak base and its conjugate acid respectively. When a strong acid like HI is added to the buffer, the following reaction occurs NH3 (ammonia) + HI -> NH4+ (ammonium) + I-. In this reaction, the base component of the buffer (ammonia) reacts with the added acid (HI), neutralizing it and producing its conjugate acid (ammonium). The remaining ammonium chloride in the buffer then helps maintain the pH by releasing more ammonia into the solution.

https://brainly.com/question/31619315

#SPJ12

In a buffer containing ammonia and ammonium chloride, the ammonia molecules react with hydronium ions from the added acid to form ammonium ions and water, neutralizing the acid.

A buffer is a solution that resists dramatic changes in pH and is composed of pairs of solutes, such as a weak acid and a salt derived from that weak acid, or a weak base and a salt of that weak base. In this case, the buffer contains ammonia and ammonium chloride. When an acid, such as HI, is added to the buffer, the ammonia molecules react with the hydronium ions (H3O+) to form ammonium ions (NH4+) and water, effectively neutralizing the added acid.

The equation for this reaction is:

H3O+ (aq) + NH3(aq) → NH4+ (aq)+ H2O(1)

https://brainly.com/question/31619315

#SPJ2

The reaction that results in the greatest increase in entropy is [tex]\rm A \rightarrow 2B[/tex]. The correct answer is option A.

Entropy is a measure of the disorder or randomness of a system. The greater the number of particles in a system, the greater the entropy. A reaction that produces more particles will result in an increase in entropy.

Therefore, option A. [tex]\rm A \rightarrow 2B[/tex] results in the greatest increase in entropy because it produces more particles, which results in a greater degree of disorder or randomness and a higher entropy.

Learn more about entropy here:

https://brainly.com/question/13999732

#SPJ6

The shells of snails is an example of calcium carbonate. option C is correct.

The shells are made up of calcium carbonate (CaCO3) compounds to protect the eggs or the embryo inside the egg or the soft body of the organism. the main purpose is to protect the body inside the shell from the harsh environment which can damage the body.

The eggshell of snail shell can be used as fillers in the polymer industries and it is the main source of calcium carbonate by crushing the shells we obtain it in powder form it is much rich in calcium.

The main function of the shell is to protect the body inside from the outer environment and for the growth of the body.

Therefore, the shells of snails are an example of calcium carbonate. option C is correct.

Learn more about shells, here:

https://brainly.com/question/14384445

#SPJ2

Rubisco is a super important enzyme in plants that first captures CO2 to begin the process of the Calvin cycle. It's the most important enzyme by far because it starts the entire process of Carbon Fixation.

Rubisco is an essential enzyme in photosynthesis that catalyzes the incorporation of atmospheric carbon dioxide into organic molecules during the Calvin cycle. It can also catalyze a competing reaction with oxygen, leading to photorespiration, which decreases photosynthetic efficiency. Some plants have adapted by developing pathways like the C4 cycle to reduce photorespiration and improve carbon dioxide assimilation.

What is Rubisco?

Rubisco, short for Ribulose-1,5-bisphosphate carboxylase/oxygenase, is an enzyme that is central to the process of photosynthesis. Its main function is to catalyze the first major step of the light-independent reactions, often referred to as the Calvin cycle. During this process, Rubisco facilitates the carboxylation (addition of carbon dioxide) of ribulose bisphosphate (RuBP), a 5-carbon molecule, ultimately leading to the production of glucose and other carbohydrates that plants use for energy.

Relationship to Photosynthesis

Rubisco's role in photosynthesis is twofold. On the one hand, it captures atmospheric carbon dioxide by adding it to RuBP. On the other hand, Rubisco can also react with oxygen instead of carbon dioxide, in a process known as photorespiration. Photorespiration consumes energy and releases fixed carbon dioxide, thus reducing the efficiency of photosynthesis under certain conditions, such as high oxygen concentrations or intense light. To overcome this, some plants have developed adaptations, such as the C4 pathway, which minimizes photorespiration and maximizes the use of carbon dioxidea for the Calvin cycle.

Additional Information

Rubisco is known to be one of the most abundant proteins on earth and is significant in the global carbon cycle. It operates relatively slowly, with a turnover rate of about 2-10 molecules of CO₂ per second. Moreover, it has a tendency to engage in the competing reaction of photorespiration that uses oxygen instead of carbon dioxide. This competing reaction can be a wasteful process as it consumes ATP and carbon skeletons that could otherwise be used for more productive processes within the plant.

Option B : Protein.

[tex]DNA\overset{Transcription}{\rightarrow}mRNA\overset{Translation}{\rightarrow} Protein[/tex]

The genetic information is stored in DNA which is carried by mRNA (messenger RNA). This genetic information is in the form of three-base code, here each code  is used to represent an amino acid. The sequence of amino acid form proteins thus, the correct option is protein.

The best description of a gaseous substance among the given options is It has no definite shape or volume, and will expand indefinitely. The correct option is an option (c).

Gaseous substances do not have a definite shape or volume. They take shape and fill the entire space of the container they are in. They can expand indefinitely to occupy any available space. This description accurately represents the characteristics of a gaseous substance.

Therefore, It has no definite shape or volume and will expand indefinitely. The correct option is an option (c).

To know more about the gaseous state:

https://brainly.com/question/13557289

#SPJ4

The complete question is:

Which of the following is the best description of a gaseous substance?

It has no shape of its own but has a definite volume.

It has no definite shape or volume and will expand indefinitely.

It holds its shape without outside restraint.

It is the result of a chemical reaction involving two or more elements.

Final answer:

A gaseous substance is best described as having no definite shape or volume, expanding to fill the volume of any container it is in.

Explanation:

The best description of a gaseous substance is that it has no definite shape or volume, and will expand indefinitely to fill any container. Unlike solids that hold their shape without outside restraint, and liquids that have a definite volume but take the shape of their container, gases are characterized by particles that move about randomly in space with enough energy to completely overcome intermolecular interactions. This significant characteristic delineates a gas from other phases of matter, as it occupies the entire space available, regardless of the size of the container.

Answer:

Fluorine would likely have the highest electronegativity value.

Explanation: