Answer / Explanation
Numbers of drivers in Los Angeles that incur an additional 30 minutes of traffic delays = 500000
Neither of the cities
Hence,
L.A. = O.50 hrs. x 500,000 drivers at $15/hr implies a cost of $3,750,000 ) Boston = 0.75 hrs. x 200,000 drivers at $25/hr implies $3,750,000
Final answer:
Both Los Angeles and Boston incur the same opportunity cost of $3,750,000 for traffic delays experienced by drivers.
Explanation:
To calculate the opportunity cost for each city, we need to multiply the number of drivers by the delay (in hours) and then by the price of time. For Los Angeles, the calculation is 500,000 drivers × 0.5 hours × $15/hour. For Boston, it's 200,000 drivers × 0.75 hours × $25/hour.
Los Angeles: 500,000 × 0.5 × $15 = $3,750,000
Boston: 200,000 × 0.75 × $25 = $3,750,000
Interestingly, both cities incur the same opportunity cost of $3,750,000 for the delays experienced by drivers.
Refer to the hr report section of the inquirer. chester will continue to keep their current hourly levels of training in order to help reduce turnover and improve productivity next year. how much must be spent per employee on an hourly basis to maintain the current training commitment?
Complete Question:
Refer to the HR Report section of the Inquirer. Baldwin will continue to keep their current hourly levels of training in order to help reduce turnover and improve productivity next year. How much must be spent per employee on an hourly basis to maintain the current training commitment?
The photo of the table is attached as under:
Select: 1
$8,786
$18
$20
$30
Answer:
$20
Explanation:
We can find the training cost per employee per hour by using the following formula:
Training cost per employee per hour = Training Cost / Complement Training Hours
Here
Complement Training Hours = Number of Compliments * Number of hours
Total training hours = 80 Hours
Number of complements = 579
By putting values in the complement training hours formula, we have:
Complement Training Hours = 579 * 80 = 46,320 Hours
Total cost of training per employee Chester ($927 Given in thousands)
= $927,000
By putting the values, we have:
Training cost per employee per hour = $927,000 / 46,320 = $20.01 or $20
Option C is correct here.
The hourly training cost depends on the total training expenses and the number of employees.
Explanation:To determine how much must be spent per employee on an hourly basis to maintain the current training commitment, we need more specific information about the training expenses and the number of employees. The hourly training cost can be calculated by dividing the total training expenses by the number of employees. For example, if the total training expenses are $10,000 and there are 100 employees, the hourly training cost would be $100 per employee ($10,000 / 100 = $100). It's important to note that this is just a hypothetical example and the actual numbers may vary depending on the specific data given in the HR report section of the inquirer.
Learn more about Hourly Training Cost here:https://brainly.com/question/32923141
#SPJ11
Bosio Inc.'s perpetual preferred stock sells for $102.50 per share, and it pays an $8.50 annual dividend. If the company were to sell a new preferred issue, it would incur a flotation cost of 4.00% of the price paid by investors. What is the company's cost of preferred stock for use in calculating the WACC?
The cost of preferred stock for Bosio Inc. to use in the WACC calculations is determined based on the annual dividend paid and the net price obtained after accounting for flotation costs, which work out to about 8.63%.
Explanation:Bosio Inc.'s cost of preferred stock for use in calculating the weighted average cost of capital (WACC) can be determined by considering the annual dividend and the net price it will receive after flotation costs. As the stock price paid by investors is $102.50 per share and the flotation cost is 4.00%, the net price Bosio Inc. will receive is $102.50* (1-0.04) = $98.40. The company pays an annual dividend of $8.50. Thus, the cost of preferred stock or the requisite rate of return for the investors is the annual dividend divided by the net proceeds from the sale of the stock, i.e., $8.50/$98.40 = 0.0863 or 8.63%.
This figure is used in the calculation of the WACC to reflect the cost of financing from issuing preferred stock. Keep in mind that this is a simplified scenario and in real life, the calculation might need to take into account more complex factors, such as tax adjustments, the growth rate of dividends, or changes in stock prices over time.
Learn more about Cost of Preferred Stock here:https://brainly.com/question/33511324
#SPJ3
Bosio Inc.'s cost of preferred stock for WACC calculation is approximately 8.64%, taking into account a $102.50 share price, $8.50 annual dividend, and 4.00% flotation cost.
Bosio Inc.'s perpetual preferred stock sells for $102.50 per share and pays an $8.50 annual dividend. If the company sells a new preferred issue, it incurs a flotation cost of 4.00%. To calculate the cost of preferred stock for WACC, use the formula:
Cost of Preferred Stock = Dividend / (Price * (1 - Flotation Cost))
Given the details:
Dividend: $8.50Price: $102.50Flotation Cost: 4.00% (or 0.04)The calculation is:
Cost of Preferred Stock = $8.50 / ($102.50 * (1 - 0.04)) = $8.50 / $98.40 ≈ 0.0864 or 8.64%
Therefore, the company's cost of preferred stock for use in calculating the WACC is approximately 8.64%.
In 2018, it was discovered that Jenson Technologies had debited an expense account for the $400,000 cost a computer purchased on January 1, 2016. The computer's useful life was estimated to be four years with no residual value. Straight-line depreciation is used by Jenson. Ignoring income taxes, what journal entry will Jenson use to correct the error?
Answer:
Explanation:
journal entry will Jenson use to correct the error
Date Account Titles And Explanation Debit Credit
Computer $400,000
Accumulated depreciation ($100,000 × 2 years) $200,000
Retained earnings ($400,000 - $200,000) $200,000
Annual depreciation = (Cost - Salvage Value) / 4
= ($400,000 - 0) / 4
= $100,000
To correct the error, Jenson Technologies will need to debit the accumulated depreciation account for $400,000 and credit the expense account for the same amount. The journal entry will be as follows:
Dr. Accumulated Depreciation - Computer: $400,000
Cr. Depreciation Expense: $400,000
The computer was incorrectly expensed in full when it was purchased, rather than being capitalized and depreciated over its useful life. Since the computer has a useful life of four years with no residual value, the annual depreciation expense would be calculated as follows:
Cost of the computer / Useful life = $400,000 / 4 years = $100,000 per year
By the end of 2018, two years would have passed since the purchase of the computer, so the total depreciation expense for two years would be:
$100,000 per year * 2 years = $200,000
However, since the entire cost was expensed in 2016, there is no need to record the depreciation expense for 2017 and 2018. Instead, the correction involves reversing the incorrect expense and recognizing the accumulated depreciation that should have been recorded.
The accumulated depreciation account is a contra-asset account that represents the total amount of depreciation expense that has been recorded over the life of the asset. By the end of the asset's useful life, the accumulated depreciation should equal the asset's cost, assuming it has no residual value.
To correct the error, Jenson Technologies needs to adjust the accounts to reflect the proper treatment of the computer as a depreciable asset. The company will debit the accumulated depreciation account for the full cost of the computer ($400,000), which effectively removes the incorrect expense from the income statement and capitalizes the computer on the balance sheet. The credit will go to the expense account that was incorrectly debited, restoring its balance.
This correction does not affect the depreciation expense that would have been recorded in the normal course of business, as the asset should have been depreciated over its useful life. The correction simply rectifies the initial error in the accounting treatment of the computer's cost."
Inventory and safety stock planning ________. leads to the development of the overall demand forecast leads to the development of a transportation schedule leads to the development of a sourcing plan focuses on delivering products or services to consumers as well as warehousing focuses on the coordination of all activities needed to create a product or service
Answer: leads to the development of a sourcing plan
Explanation:
Inventory planning includes the safety stock planning. Safety stock planning means the additional maintenance of the stock to avoid the situation of being completely out of stock when needed. Safety stock acts as the buffer stock during the times of unexpected sudden increase in demand.
Through inventory and safety planning the goods can be accumulated based on the sale or the production of the firm. These things lead to the development of the source planning.
The ________ manages all systems throughout the organization and the day-to-day operations of the entire IS organization. Question 1 options:
1) applications development manager
2) CIO
3) information center manager
4) IS Director
Answer:
The answer in this case would be option 4) or IS Director.Explanation:
In an IS organization, one of the most important directorial duty or responsibility of an IS Director is to oversee the regular or normal day to day functioning of the organization to ensure effectiveness and efficiency of the regular operational activities or conducts.An IS Director also manages all the relevant and concerned systems throughout the entire organization to facilitate the regular operational functioning of the organization.Therefore, the relevant duties and responsibilities of a IS Director mostly relates to operational aspects and system management.It should be noted that IS Director manages all systems throughout the organization and the day-to-day operations of the entire IS organization.
This IS Director is responsible for how the system is able to manage their resources in achieving tangible goal that has been set by the entire IS organization.Therefore, option D is correct.
Learn more about IS Director at:
https://brainly.com/question/17583177
Adam Smith, the father of modern economics, wrote The Wealth of Nations in 1776. A key example in his book was a pin "manufactory." "The important business of making a pin is ... divided into about eighteen distinct operations," he wrote. Ten men were able to make 240 times as many pins as each working separately might accomplish. This is how Smith explained __________.
a. division of resources
b. pin manufacturing in the 1700s
c. division of labor and specialization.
Answer:
division of labor and specialization
Explanation:
James has $1500 to open a checking account. He can maintain a monthly balance of at least $1000. He plans to use the ATM four times per month at his local branch. He does not overdraft his account and plans to use direct deposit. He also plans to pay his bills online and he averages 8 bills per month.
A. Account B
B. Account A
Answer:
B. Account A
Explanation:
James has $1500 to open a checking account. He can maintain a monthly balance of at least $1000. He plans to use the ATM four times per month at his local branch. He does not overdraft his account and plans to use direct deposit. He also plans to pay his bills online and he averages 8 bills per month.Account A
Answer:
Account A
Explanation:
Milo Co. had 600,000 shares of common stock outstanding on January 1. On May 1, Milo issued 126,000 shares. On September 1, Milo purchased 63,000 shares of treasury stock. The weighted average shares outstanding for the year is:________.a. 751,000.b. 663,000.c. 793,000.d. 814,000.
Answer:
b. 663,000
Explanation:
Outstanding shares refers to the total number of stock held by investors at a particular time. They are the shares issued out to both retail and institutional investors and insiders, such as directors and employees. Outstanding shares will exclude shares that have been repurchased back by the issuing company (treasury stock).
The weighted average share outstanding takes into consideration the duration of time that issued stocks have been in the markets. It allocates value proportionately to the time in the market.
For Millo Co, the weighted average share outstanding for the year will be
1. January 1, 600,000
2. May 1, issued 126,000 shares ( 8 months)
weighted for the year=8/12 x 126,000 = 84,000
3. September 1, purchased 63,000 treasury stock
(4 months) weighted value will be
= 4/12 x 63,000= 21,000
The weighted average share outstanding
Beginning balance plus shares issued out minus repurchased shares(treasury stock)
=600,000 + 84,000 -21,000
=663,000
To calculate the weighted average shares outstanding for the year, we need to determine the total number of shares outstanding at each point in time and weight them by the number of days they were outstanding. After performing the calculations, the weighted average shares outstanding for the year is approximately 299,180.33.
Explanation:To find the weighted average shares outstanding, we need to calculate the total number of shares outstanding at each point in time and weight them by the number of days they were outstanding.
On January 1, Milo Co. had 600,000 shares outstanding for the full year.
On May 1, Milo issued 126,000 shares, which were outstanding for 245 days (from May 1 to December 31).
On September 1, Milo purchased 63,000 shares of treasury stock, which were outstanding for 122 days (from September 1 to December 31).
So, the weighted average shares outstanding for the year is calculated as follows:
Weighted Shares Outstanding = (600,000 * 365) + (126,000 * 245) + (63,000 * 122)Total Weighted Days = 365 + 245 + 122Weighted Average Shares Outstanding = Weighted Shares Outstanding / Total Weighted DaysWeighted Average Shares Outstanding = (600,000 * 365) + (126,000 * 245) + (63,000 * 122) / (365 + 245 + 122)Weighted Average Shares Outstanding = 219,000,000 / 732Weighted Average Shares Outstanding ≈ 299,180.33Therefore, the weighted average shares outstanding for the year is approximately 299,180.33.
Clay offers to pay Diane $50 for a golf lesson for Ewan. They agree to meet on Friday to exchange the cash for the lesson. These parties have made a bilateral contract. a unilateral contract. a void contract. an executive contract.
Answer:
Bilateral contract.
Explanation:
Bilateral contract: It is a legally binding contract between two or more parties, wherein each party agree to fullfil the promise made to each other.
There are four elements necessary for the existence of a bilateral contract:
Agreement.Consideration.Intention to create legal relations.Certainty.In the given case, Clay offers to pay Diane $50 for a golf lesson for Ewan, which they are fulfilling by agreeing to meet on Friday to exchange the cash for the lesson. Therefore, these parties have made a bilateral contract.
Pretax financial statement income for the year ended December 31, 2018, was $25 million for Scott Pen Company. Scott’s taxable income was $30 million. This was a result of differences between depreciation for financial reporting purposes and tax purposes. The enacted tax rate is 30% for 2018 and 40% thereafter. What amount should Scott report as the current portion of income tax expense for 2018?
a. $7.5 millionb. $ 9 millionc. $ 10 milliond. $ 12 million
Answer:
Option B $9 million is the correct answer.
Explanation:
The current portion of income tax expense is the taxable for the year multiplied by the prevalen tax rate in the year.
Current portion of income tax expense=taxable income*tax rate
taxable income is $30 million
tax rate is 30%
current portion of income tax expense=$30 million*30%=$ 9 million
Option B is the correct answer
However,if one chooses option A,it implies that one had used pretax net income of $25 million in computing the income tax expenses instead of taxable income on which tax is payable
Answer:
B. $ 9 million
Explanation:
Pretax financial statement income for the year ended December 31 2018
Scott’s taxable income $30 million
Enacted tax rate is 30% for 2018
Hence;
$30 million × 30% = $9 million
Therefore the amount Scott should report as the current portion of income tax expense for 2018 is $9 million
The expense of public goods is:
A. determined by the forces of supply and demand in the product market.
B. determined by the forces of supply and demand in the factor market.
C. funded by large corporate organizations.
D. funded through public finance measures such as taxation. funded by charitable trusts.
Answer:
D. funded through public finance measures such as taxation.
Explanation:
Public goods are not necessarily provided in the free market, although it may be the case.
For this reason, governments take the function of prodiving public goods such as roads, elementary schools, and hospitals. Because the government does not produce as much wealth as the private sector in a market economy, what the goverment does is taxing the private sector to obtain the necessary funds to provide the public funds.
In case taxation is not enough, the government issues debt, and in extreme cases, prints money, a practice known as seignorage.
Answer:
D. funded through public finance measures such as taxation. funded by charitable trusts.
Explanation:
Base on the scenario been described in the question, the expense of the public goods is been financed by public finance taxation, this is done through the government, because the government does not have much wealth compared to the private sector, another way it us been founded is through charitable trusts
CityProtect Corp., a medium-sized financial services company, has a departmentalization structure in which the employees are grouped together based on their area of expertise. Thus, the firm has separate teams that handle loans, stock broker services, accounting services, insurance plans, etc. This is an example of _____ departmentalization.
Answer: Functional
Explanation:
The functional departmentalization is one of the type of organized form of department in an organization in which the different types of employee are performing their task and function depend upon their individual expertise and capabilities.
The main advantage of the functional departmentalization is that it helps in reduce the complexity in an organization as depend upon different operation the task are get divided to the different department in the company.
According to the given question, the given example of the City-protect corporation is best illustrating the functional department concept. Therefore, Functional is the correct answer.
Tempe LLC incurred the following costs during its first year: Legal fees for drafting the operating agreement $18,000 Syndication costs $19,000 Preopening advertising expenses $20,000 Accounting fees for tax advice of an organizational nature $15,000 Training costs for new employees before opening the business $12,000 The amount of Tempe's startup costs is?
Answer:
The start up cost of the Tempe amounts to $32,000
Explanation:
Startup cost is the cost or an expense which is incurred during the procedure of creating or establishing the new business. And the example of the start up costs or pre- opening cost are research expense, business plan and expense for technology. The Post- opening expense involve promotion, employee expense and advertising.
The start up costs of Tempe is computed as:
Start up costs = Pre- opening advertising expenses + New employees training costs before opening the business
where
Pre- opening advertising expenses is $20,000
New employees training costs before opening the business is $12,000
So, putting the values above:
Start up costs = $20,000 + $12,000
Start up costs = $32,000
At the end of 2021, Havana contributed $696 thousand to the pension fund and benefit payments of $624 thousand were made to retirees. The expected rate of return on plan assets was 10%, and the actuary's discount rate is 8%. There were no changes in actuarial estimates and assumptions regarding the PBO.
What is Havana's 2016 actual return on plan assets?
Answer:
Havana's 2016 actual return on plan asset is $504 thousand.
Explanation:
Havana's 2016 actual return on plan asset is $504 thousand.
Let actual return be x.
Ending balance of plan assets = Beginning balance of plan asset + Actual return + Cash Contributions - Retiree benefits
$6,336 = $5,760 + x + $696 - $624
x = $6,336 - $5,760 - $696 + $624
x= $504 (answer).
Final answer:
The actual return on plan assets cannot be calculated with the given information.
Explanation:
The actual return on plan assets is calculated by subtracting the beginning fair value of plan assets from the ending fair value of plan assets and adding any contributions made to the plan during the year. In this case, we have a contribution of $696 thousand to the plan. We also know that the expected rate of return on plan assets is 10%. However, we don't have information about the beginning and ending fair value of plan assets.
Therefore, we cannot calculate the actual return on plan assets with the given information.
The appropriate maintenance policy is developed by balancing preventive maintenance costs and breakdown maintenance costs. The problem is that A. full breakdown costs are seldom considered. B. breakdown maintenance must be performed regardless of cost. C. preventive maintenance costs are very difficult to identify. D. preventive maintenance should be performed regardless of cost.
Answer:
A. full breakdown costs are seldom considered.
Explanation:
In developing an appropriate maintenance policy a business will have to consider cost. It will balance preventive maintenance costs and breakdown maintenance costs.
This process requires a full breakdown of the costs imvolved. On the one hand cost of preventive maintenance should only include essential activities without which preventive measures will fail.
While breakdown maintenance cost will involve activities that will bring broken down processes and assets back to functionality as soon as possible.
Answer:
A. full breakdown costs are seldom considered.
Explanation:
In Business economics, the appropriate maintenance policy is developed by balancing preventive maintenance costs and breakdown maintenance costs.
However, the problem is that full breakdown costs are seldom considered by businesses owners.
Full breakdown costs involves the process of identifying the individual elements that comprise the total cost of a particular product or service.
In the short run, the costs associated with variable inputs are _____, and the costs associated with _____ inputs are _____. variable;
fixed;
fixed fixed;
fixed;
fixed variable;
fixed;
variable fixed;
fixed;
variable
Answer:fixed
Explanation: In the short run the rate at which some input being used are fixed and costs associated with these fixed inputs must be incurred regardless of the level of output produced. Other costs do different with the level of output produced by the firm during that period.
In the short run, variable input costs are variable, adapting to changes in production demand while fixed input costs remain constant, unaffected by production levels.
Explanation:In the short run, the costs associated with variable inputs are variable, and the costs associated with fixed inputs are fixed. Variable inputs refer to resources used in production that can be adjusted easily, such as labor or raw materials. If your production demands increase, you can easily hire more workers or buy more raw materials, and therefore, the costs associated with these inputs are variable in nature. Conversely, fixed inputs are resources with costs that don't change in the short run, irrespective of the level of output. For example, a factory building or machinery are fixed inputs, as their costs stay same irrespective of the production levels.
Learn more about Business economics here:https://brainly.com/question/36240174
#SPJ12
On October 1, 2013, Holt Company places a new asset into service. The cost of the asset is $80,000 with an estimated 5-year life and $20,000 salvage value at the end of its useful life. What is the book value of the plant asset on the December 31, 2013, balance sheet assuming that Holt Company uses the straight-line method of depreciation? A. $60,000 B. $72,000 C. $52,000 D. $77,000
Answer:
D. $77,000
Explanation:
Depreciation expense using the straight line depreciation method = (Cost of asset - Salvage value) / useful life
($80,000 - $20,000) / 5 = $12,000
Accumulated Depreciation between October 1, 2013 and December 31, 2013 = (3/12) x $12,000 = $3,000
Book value = Cost of asset - accumulated deprecation
= $80,000 - $3,000 = $77,000
I hope my answer helps you
Answer:
D. $77,000
Explanation:
Depreciation is the recording of asset expense due to its use. It is due to use of fair value of the asset after use. The expense value reduces the asset value over useful life period.
As per given data
Cost of Asset = $80,000
Useful life= 5 years
Salvage Value = $20,000
Asset is purchased on October 1, 2013 and on December 31, 2013 depreciation of only 3 months has accrued.
Depreciation per year = (Cost of Asset - Salvage Value) / Useful life = ($80,000 - $20,000)/ 5 = $12,000
Depreciation Expense for the year 2013 = $12,000 x 3/12 = $3,000
Book value of the asset is the net of accumulated depreciation of the asset. The accumulated depreciation on December 31, 2013, is $3,000
Book Value = Cost - Accumulated Depreciation = $80,000 - $3,000 = $77,000
Certain brand names, such as Kleenex or Xerox, have become _______, because they are so commonly identified with a specific product category that consumers use these names to refer to any product in that category regardless of the manufacturer.
Answer: Certain brand names, such as Kleenex or Xerox, have become generic name.
Explanation:
Generic name is the term used to refer a product with its brand name rather than the product itself. Kleenex and Xerox are the brand names of the products. Xerox is photocopying product and Kleenex is the brand name for wet wipes. People commonly use the word Kleenex instead of tissues or wet wipes.
This process can be called as genericization and companies loose their trademarks due to these usage of names. These generic names have wide spread popularity.
An organization has a standing order with a supplier. the organization has ordered the same product in the same quantity monthly over the past year. the purchasing manager has decided to change suppliers in order to get a better price. the order the purchasing manager places with the new supplier is an example of a ________.
Answer:
Modified Rebuy.
Explanation:
Modified Rebuy can be defined as the desires of a buyer to re-purchase or reorder the products previously bought but with certain modifications either in prices, products, suppliers, or terms. The buyer may modify the current purchasing terms because he may not be satisfied with the supplier or may have some new requirements.
In the given case, the modification in supplier has been made by the organization to get a better price. Thus this is an example of modified rebuy.
So, the correct answer is modified rebuy.
Harold asks his prospects several questions to understand the reasons for their hesitation in buying his product. He tries to identify all the issues and tries to solve them immediately. From this scenario, it is evident that he uses the _____ method of obtaining commitment.
Answer:
fhuafuhfuhsuihfuishfdvbcgufjvhfigirhhjfhhhfhh
Explanation:
Rita, a salesperson in a textile manufacturing company, makes a sales pitch to a representative of a garment manufacturing company. During the sales presentation, Rita shows the representative a few samples of the new fabric that Rita's company recently introduced in the market. The representative, however, expresses concern that her customers may not be keen on wearing clothes made of those fabrics. Rita responds to this by saying "I can certainly understand your apprehensions. Mark, from a company similar to yours, had the same concerns initially. However, we recently received feedback from him, and he says that his customers love the clothes made from the new fabric." In this case, Rita uses the _____ method to handle sales resistance.
Answer: The options are given below:
A. forestalling
B. direct denial
C. translation
D. coming to that
E. feel, felt, found
The correct option is E.
Explanation: The feel, felt, found method is a strategy that is age-tested and has been proven to persuade customers gently into a new way of thinking about a particular product or service.
There are three separate but essential parts to the feel, felt, found method, they are;
- Feel, which is basically used in the context below:
“I understand how you feel.”
Using sentences like this will let a customer know that you heard him/her and that you can relate with his or her complaints.
- Felt, which is usually used in the context below:
“Initially, other customers felt that way.”
Using words like these is basically letting the client know that their initial thought about the product or service is common, and that it is subject to change.
- Found, which can be used in the context below:
“What they discovered, however, was that after taking so and so action was that they got positive results"
This will let the client know that there is an action that should be taken to get the desired result, and this is the action you want the client to take.
This is the strategy that Rita in the question above used.
Suppose the cost of flying a 100-seat plane for an airline is $50,000 and there are 10 empty seats on a flight. The average cost per seat is a. $50. b. $500. c. $50,000. d. This cannot be determined from the information given.
Answer:
$500
Explanation:
The average cost per seat will be the total cost per plane divided by the seating capacity.
Therefore, the average cost of $50,000 divide by 100 seats
=$50,000/50 seats
=$500
Ronak is a project manager. He ensures that his project is completed on time by dividing the activities in the project into two stages: production and quality check. Which problem-solving strategy is Ronak using to meet the deadline?
Answer:
Forming subgoals
Explanation:
Subgoal is formed when learners are working toward a certain goal and notice that a set of steps puts them in a situation that allows them to ultimately achieve the goal.
Options:
A. forming subgoals
B. working backward
C. trial and error
D. means-ends analysis
Answer:
A. forming subgoals
Explanation:
In project management, it is always necessary to break down the project's final objective (goal) in smaller subgoals, so that you can divide your schedule's content and time. Imagine a project for building a factory that should take 2 years, you need to divide the project's goal (factory) into smaller subgoals in order to control how the project advances. The sum of all the subgoals should be the final goal.
It is normal that projects suffer form setbacks, changes and other alterations, so the subgoals must be adjusted to them.
Back to Study Plan Score: 193/200 Question Value: 35 points A baker adds yeast and warm water to bread to cause it to rise. What other ingredient of bread is necessary for this to occur, and what is the by-product being produced that causes the bread to rise
Answer:
Yeast is a basic ingredient which causes the bread to rise.
Answer: 1. Flour is the third ingredient.
2. Carbon dioxide and Ethanol
are by-products that also
cause rising.
Explanation:
Bread rises in a process known as Fermentation. Fermentation is the process in which microorganisms such as yeast help to break down molecules like sugar in an anaerobic process, eventually giving off a gas and alcohol.
Ingredients required include; yeast, water, and flour. The mixture of yeast and water react with the sugar present in the flour to cause rising. Carbon dioxide and ethanol are then produced.
The gluten (which Is produced when flour proteins mix with water) in the dough mixture reacts with the carbon dioxide gas, making it hard for the gas to be emitted. This process causes rising.
As ethanol is given off and evaporating from the mixture, rising also occurs.
________ refers to the means by which firms attempt to inform, persuade, and remind consumers-directly or indirectly-about the products and brands they sell. A. Planning B. Financial management C. Human resource development D. Marketing communications
Answer:
Marketing Communications
Explanation:
Final answer:
Marketing communications refers to the means by which firms attempt to inform, persuade, and remind consumers about the products and brands they sell. It involves methods such as advertising, public relations, sales promotions, and direct marketing.
Explanation:
Marketing communications refers to the means by which firms attempt to inform, persuade, and remind consumers-directly or indirectly-about the products and brands they sell. It is a crucial aspect of a company's marketing strategy and involves various methods such as advertising, public relations, sales promotions, and direct marketing.
For example, advertising is a form of marketing communication that aims to increase the likelihood that consumers consider a firm's product or service. Through advertisements, companies inform and educate potential customers about their offerings, influencing their purchasing decisions.
Marketing communications are an essential part of creating brand awareness, generating sales, and building relationships with customers. It helps companies reach their target audience, convey their value proposition, and differentiate themselves from competitors.
Mike and Sandy are two woodworkers who both make tables and chairs. In one month, Mike can make 4 tables or 20 chairs, where Sandy can make 6 tables or 18 chairs. Given this, we know that the opportunity cost of 1 chair for ____________.
Answer:
for Mike: 0.2 tables,for Sandy: 1/3 tables
Explanation:
To calculate the opportunity cost, we can simply divide the cost of what is given up by what is gained.
=> The opportunity cost for chair can be calculated by dividing the total numbers of table made in 1 month by the numbers of chairs made in 1 month.
In 1 month, Mike can make 4 tables or 20 chairs, so that the Opportunity cost of 1 chair is: OC of 1 chair for Mike = 4/20 = 0.2 tableIn 1 month, Sandy can make 6 tables or 18 chairs, so that the Opportunity cost of 1 chair is: OC of 1 chair for Sandy = 6/18 = 1/3 tableThe following are true statements about distributive bargaining except:
a. It is confrontational and focused on the short term.
b. It can resolve disputes.
c. It tends to provide outcomes that satisfy all parties.
d. It often reduces the satisfaction of one or more negotiators.
Answer:
c. It tends to provide outcomes that satisfy all parties.
Explanation:
Base on the scenario been described in the question, distributive bargaining does all of the except that is doest not provide outcomes that satisfy all parties, the type of bargaining that satisfy both parties is integrative bargaining.
Distributive bargaining is an adversarial type of negotiation in which it is believed that if any gain of a competitor is a loss to the other party in the negotiation .
Distributive bargaining is when parties involved in a negotiation split a limited resource. It often leaves one or both parties unsatisfied contrary to statement 'c' which suggests all parties are satisfied.
Explanation:The subject of this question is distributive bargaining, a negotiation method in business where the parties involved split a limited resource, such as money. The statements listed above are mostly accurate with the exception of statement c: 'It tends to provide outcomes that satisfy all parties'. This is typically not the case with distributive bargaining, as it is a zero-sum game, meaning that the gain of one party corresponds to the loss of the other. Therefore, it often leaves one or both parties unsatisfied.
Learn more about Distributive Bargaining here:https://brainly.com/question/33537937
#SPJ6
Matt, a supervisor, refuses to let female employees work on overtime assignments because hethinks it is unsafe for women to work after 6 p.m. The female employees decide to file a charge against Matt with the Equal Employment Opportunity Commission. This case is an example of ______.
A. reverse discrimination
B. a business necessity
C. retaliation
D. disparate impact
E. disparate treatment
Answer:
D. Disparate impact
Explanation:
The situation described in this case is a form of discriminatory practices whereby the female is assumed to be "weaker" by Matt the supervisors who says it's unsafe for women to work after 6pm. The situation by law is referred to as disparate impact. Disparate impact involves the unintentional discrimination of a protected group more than other group even tho the practices and rules appears to be neutral for both. In this case, the minority or protected group is said to receive unfavorable employment decisions like in the case we have here. The women here are receiving unfavorable employment decisions by not been allowed to work by time after 6pm.
Rather than acquire an existing textile manufacturer in Jakarta, FauxFabric Inc. chose to establish new operations in Indonesia. This form of FDI is called consolidation. a greenfield investment. an acquisition. a licensing agreement. mass customization.
Answer: (A) Greenfield investment
Explanation:
The greenfield investment is one of the type of FDI ( Foreign direct investment) that helps in constructing the various types of new production facilities in an organization.
The main objective of the greenfield investment process is to making the manage the investor control process and also form different types of opportunities for managing the partnerships in the market.
According to the given question, the Greenfield investment process is helps in establishing the various types of new operation in Indonesia and it is the form of foreign direct investment.
Therefore, Option (A) is correct answer.
what is the business definition of guilt.
Answer:
when a business man or woman regrets the decision they have made that could have impacted their business