tarzan plans to cross a gorge by swinging in an arc from a hanging vine. if his arms are capable of exerting a force of 1400N on nthe vine, what is the maximum speed he can tolerate at the lowest point of his swing? His mass is 80kg, and the vine is 5.5m long

Answer:

a) 24 Hs. b) 0.224 m/s² c) 448 N

Explanation:

a) As satellites in a geosynchronous orbits, stay directly over a point fixed on the Equator while the Earth rotates, the only way that this can be possible, if the period of the satellite (time to complete a full orbit) is equal to the time that the Earth uses to complete a spin itself, which is exactly one day.

b)

The value of g, is just the acceleration due to the gravitational attraction between the satellite and the Earth.

According the Universal Law of Gravitation, this force can be written in this way:

Fg = ms . a = G me. ms / (re+rs)² ⇒a=g= G me / (re + rs)²

Replacing by the values of G, me, re, and rs, we get:

g = 6.67. 10⁻¹¹ . 5.97.10²⁴ / (6.37 10⁶ + 3.58.10⁷)² m/s²

g= 0.224 m/s²

c) If we call "weight" to the magnitude of the gravitational force on the satellite (as we do with masses on Earth), we can find this value, just solving the equation for Fg, as follows:

Fg = G me . ms / (re + rs)²

Replacing by the values, we find:

Fg = 448 N

A satellite in geosynchronous orbit has a period of 24 hours. The gravitational acceleration at this altitude is roughly 0.224 m/s^2. The weight of a 2000 kg satellite in a geosynchronous orbit is roughly 448 N.

A satellite in a geosynchronous orbit has a period of 24 hours, which equates to how long it takes the Earth to rotate once on its axis. The value of gravitational acceleration g at an altitude of a geosynchronous orbit can be calculated using the formula g = G × (M / (R+h)^2), where G is the gravitational constant, M is the mass of the Earth, R is the radius of the Earth, and h is the altitude of the satellite.

Using the given altitude, the value of g at this height is approximately 0.224 m/s^2. Now, to find the weight of a 2000 kg satellite in a geosynchronous orbit, we use the formula W=mg where m is the mass of the satellite and g is the gravitational acceleration at the altitude. That gives us the value of roughly 448 N for the weight of the satellite at geosynchronous orbit.

https://brainly.com/question/13013840

#SPJ11

To find the distance of closest approach between the alpha particle and the gold nucleus, set the potential energy equal to zero and solve for r.

In Rutherford's scattering experiments, alpha particles with a charge of +2e were fired at a gold foil. To find the distance of closest approach between the alpha particle and the gold nucleus, we need to calculate the potential energy at this point. Given that the initial kinetic energy of the alpha particle is 2.9 MeV, we can equate it to the electrical potential energy using the formula:

KE = PE

Since the alpha particle comes to rest when all its initial kinetic energy has been converted to electrical potential energy, we can set the potential energy equal to zero:

0 = k * (2e * 79e) / r

where k is the Coulomb constant and r is the distance of closest approach.

https://brainly.com/question/31994795

#SPJ6

Final answer:

To determine the distance of closest approach between an alpha particle and a gold nucleus with an initial kinetic energy of 2.9 MeV, we apply the conservation of energy principle and calculate the point where the kinetic energy is entirely converted into electrical potential energy.

Explanation:

The student is asking about the distance of closest approach between an alpha particle and the nucleus of a gold atom during Rutherford's scattering experiments when the initial kinetic energy of the alpha particle is 2.9 MeV. To find this distance, we use the concept of conservation of energy, where the initial kinetic energy of the alpha particle is completely converted into electrical potential energy at the point of closest approach. The formula for the electrical potential energy (U) at distance (r) is given by U = k*q1*q2/r, where k is Coulomb's constant, q1 and q2 are the charges of the alpha particle and gold nucleus, respectively, and r is the distance of closest approach.

The charge of an alpha particle is +2e (+2e), and the charge of a gold nucleus is +79e. Given that the initial kinetic energy (K) is 2.9 MeV, we can set K = U to solve for r. The calculation involves converting the given energy into Joules (1eV = 1.6x10^-19 J), and then using the values for k, q1 (+2e), and q2 (+79e) to determine r. Through this, we can derive the equation to calculate the distance of closest approach in femtometers (fm), noting that 1 fm = 1x10^-15 m.

The smallest distance from the wall where a listener could hear constructive interference from two in-phase loudspeakers emitting sound at a frequency of 514 Hz would be 0.668 m, under the conditions given in the problem.

The phenomenon being described here is constructive interference, which occurs when two waves overlap so that their combined effect is stronger than their individual effects. In this scenario, we calculate the path difference, which is the difference in the path traveled by the sound from the two loudspeakers. Constructive interference occurs when the path difference corresponds to an integer number of wavelengths.

First, let's calculate the wavelength of the sound: λ = speed of sound / frequency. So, λ = 343 m/s / 514 Hz = 0.668 m.

For constructive interference, the path difference should be Nλ, where N is an integer. Since we're looking for the smallest possible distance, we should take N = 1. So, the distance from the wall where the listener stands (d = path difference) should be 1 × λ = 1 × 0.668 m = 0.668 m. But none of the options given match this value. Therefore, none of the options given are correct, if we correctly followed the conditions given in the problem.

https://brainly.com/question/31857527

#SPJ12

The person standing in front of the loudspeakers, which are emitting sound waves with a frequency of 514 Hz, will experience constructive interference at a distance closest to 1.15 m from one of the speakers.

In this case, the person standing in front of the loudspeakers will experience constructive interference - where the waves from the two loudspeakers are in-phase and add up to make a louder sound - at distances that are multiples of one wavelength away from one speaker. The wavelength (λ) of the sound can be calculated using the formula λ = v / f, where v is the speed of sound and f is the frequency. Substituting the given values, λ = 343 m/s / 514 Hz = 0.667 m.

The student will hear constructive interference at distances of nλ/2 from the speaker, where n is an integer. The smallest non-zero value for n is 1, so the closest such point will be 0.667 m / 2 = 0.334 m. However, this is less than the smallest distance in the multiple choice answers, which suggest the answer should be in metres. The next value for n is 2, which gives a distance of 0.667 m, still less than the smallest multiple choice answer. The next value for n is 3, which gives a distance of 1.001 m, which falls between the 1st and 2nd options so the answer should correspond to the closest choice which is 1.15 m.

https://brainly.com/question/31857527

#SPJ12

Answer:

1.25377 m/s²

Explanation:

m = Mass of person

g = Acceleration due to gravity = 9.81 m/s²

[tex]\mu[/tex] = Coefficient of friction

[tex]\theta[/tex] = Slope

From Newton's second law

[tex]mgsin\theta-f=ma\\\Rightarrow mgsin\theta-\mu mgcos\theta=ma\\\Rightarrow \mu=\frac{gsin\theta-a}{gcos\theta}\\\Rightarrow \mu=\frac{9.81\times sin5-0.4}{9.81\times cos5}\\\Rightarrow \mu=0.04655[/tex]

Applying [tex]\mu[/tex] to the above equation and [tex]\theta=10^{\circ}[/tex]

[tex]mgsin\theta-\mu mgcos\theta=ma\\\Rightarrow a=gsin\theta-\mu gcos\theta\\\Rightarrow a=9.81\times sin10-0.04655\times 9.81\times cos10\\\Rightarrow a=1.25377\ m/s^2[/tex]

The acceleration of the same skier when she is moving down a hill is 1.25377 m/s²

Answer:

The magnitude of the linear acceleration of block A is 1.21 m/s² in downward.

Explanation:

Given that,

Mass of block A = 6.00 kg

Mass of block B = 3.00 kg

Moment of inertia = 0.220 kg.m²

Radius = 0.120 m

Suppose we need to find the the magnitude of the linear acceleration of block A

Let a is the acceleration of the blocks.

Let [tex]T_{a}[/tex] and [tex]T_{b}[/tex] are the tension in the A and B cord.

According to figure,

We need to calculate the magnitude of the linear acceleration of block A

Net force acting on block A,

[tex]F_{A}=m_{A}g-T_{A}[/tex]

[tex]m_{A} a=m_{A}g-T_{A}[/tex]

[tex]T_{A}=m_{A}g-m_{A}a[/tex]...(I)

Net force acting on block B,

[tex]F_{B}=T_{B}-m_{B}g[/tex]

[tex]m_{B}a=T_{B}-m_{B}g[/tex]

[tex]T_{B}=m_{B}a+m_{B}g[/tex]...(II)

Net torque acting on pulley

[tex]T_{net}=I\times\alpha[/tex]

[tex]T_{A}r-T_{B}r=I\times \dfrac{a}{r}[/tex]

[tex]T_{A}-T_{B}=I\times\dfrac{a}{r^2}[/tex]

[tex]m_{A}g-m_{A}a-(m_{B}g+m_{B}a)=I\times\dfrac{a}{r^2}[/tex]

[tex]g(m_{A}-m_{B})-a(m_{A}+m_{B})=I\times\dfrac{a}{r^2}[/tex]

[tex]g(m_{A}-m_{B})=I\times\dfrac{a}{r^2}+a(m_{A}+m_{B})[/tex]

[tex]g(m_{A}-m_{B})=a(\dfrac{I}{r^2}+(m_{A}+m_{B}))[/tex]

[tex]a=\dfrac{g(m_{A}-m_{B})}{(\dfrac{I}{r^2}+(m_{A}+m_{B}))}[/tex]

Put the value into the formula

[tex]a=\dfrac{9.8\times(6.00-3.00)}{\dfrac{0.220}{(0.120)^2}+(6.00+3.00)}[/tex]

[tex]a=1.21\ m/s^2[/tex]

Hence, The magnitude of the linear acceleration of block A is 1.21 m/s² in downward.

Answer:

The mass of the plank is 33 kg.

Explanation:

Given that,

Length of plank = 4 m

Distance in left from the center= 0.5 m

Mass of child = 42 kg

Mass of other child = 31 kg

Distance in right from the center= 1 m

We can sum torques around the saw horse; each force generates a torque equal to force x distance from saw horse

We need to calculate the torque for first child

Using formula of torque

[tex]\tau =mg\times d[/tex]

Put the value into the formula

[tex]\tau=42\times9.8\times1.5[/tex]

[tex]\tau=617.4\ N-m[/tex]

We need to calculate the torque for second child

The child is 1.5 m from the saw horse

Using formula of torque

[tex]\tau' =mg\times d[/tex]

Put the value into the formula

[tex]\tau'=31\times9.8\times1.5[/tex]

[tex]\tau'=455.7\ N-m[/tex]

The weight of the plank produces a clockwise torque

[tex]\tau''=mg\times d[/tex]

[tex]\tau''=mg\times 0.5[/tex]

We need to calculate the mass of the plank

Using balance equation of torque

[tex]\tau=\tau''+\tau'[/tex]

Put the value into the formula

[tex]617.4=mg\times0.5+455.7[/tex]

[tex]m=\dfrac{617.4-455.7}{0.5\times9.8}[/tex]

[tex]m=33\ kg[/tex]

Hence, The mass of the plank is 33 kg.

The mass of the plank is found to be 29 kg.

To solve for the mass of the plank, we need to use the principles of static equilibrium. The seesaw must be balanced, meaning the sum of moments around the pivot (saw horse) must be zero.

Given -

Length of the plank = 4 m

Pivot position (0.5 m to the left of the center) = 2-0.5 m from the left end = 1.5 m

Mass of the first child, m1 = 42 kg (at the left end, 1.5 m from pivot)

Mass of the second child, m2 = 31 kg (1 m to the right of the center, 1.5+1 m = 2.5 m from the pivot)

Equation of moments about the pivot (taking counterclockwise as positive):

Moment of m1 = 42 kg * 1.5 m (clockwise) = -42 * 1.5 Nm

Moment of m2 = 31 kg * 2.5 m (counterclockwise) = 31 * 2.5 Nm

Moment of the plank's weight (assuming it acts at its center, which is 0.5 m from the pivot):

Moment of plank = M * 0.5 m (clockwise) = -M * 0.5 Nm

Setting the sum of moments to zero for equilibrium:

31 * 2.5 - 42 * 1.5 - M * 0.5 = 0

Solving for M:

31 * 2.5 - 42 * 1.5 = M * 0.5

77.5 - 63 = 0.5M

14.5 = 0.5M

M = 14.5 / 0.5 = 29 kg

Therefore, the mass of the plank is 29 kg.

Answer:

[tex]f=145.29Hz[/tex]

Explanation:

The centripetal force is given by:

[tex]F_c=ma_c(1)[/tex]

Here m is the body's mass in which the force is acting and [tex]a_c[/tex] is the centripetal acceleration:

[tex]a_c=\frac{v^2}{r}(2)[/tex]

Here v is the speed of the body and r its radius. The speed is given by:

[tex]v=2\pi fr(3)[/tex]

Replacing (3) in (2):

[tex]a_c=4\pi^2f^2r(4)[/tex]

Replacing (4) in (1) and solving for f:

[tex]F_c=m4\pi^2 f^2r\\\\f=\sqrt{\frac{F_c}{4m\pi^2r}}\\f=\sqrt{\frac{4*10^{-11}N}{4(3*10^{-16}kg)\pi^2(16*10^{-2}m)}}\\f=145.29Hz[/tex]

Final answer:

To find the revolutions per second for a centrifuge, the known force acting on a red blood cell is used with the mass and radius of the centrifuge to calculate the angular velocity, which is then converted to revolutions per second.

Explanation:

To determine the revolutions per second at which a centrifuge should be operated to exert a specified force on a red blood cell, we can make use of the relationship between centrifugal force and centripetal acceleration. The force experienced by the red blood cell can be expressed by Newton's second law for circular motion: F = m\(a_{c}\), where F is the force, m is the mass of the red blood cell, and \(a_{c}\) is the centripetal acceleration.

The centripetal acceleration \(a_{c}\) is also related to the angular velocity \(\omega\) of the rotating body by the formula \(a_{c} = \omega^{2}r\), where r is the radius of the centrifuge. Solving for the angular velocity gives us \(\omega = \sqrt{\frac{F}{mr}}\). Once we have \(\omega\), we can convert it to revolutions per second by dividing by 2\(\pi\) (since one revolution is 2\(\pi\) radians).

For the given numbers, F = 4.0 \(\times\) 10^{-11} N, m = 3.0 \(\times\) 10^{-16} kg, and r = 16.0 cm = 0.16 m. We can calculate \(\omega\), and subsequently the number of revolutions per second the centrifuge should be operated at to achieve the necessary centrifugal force for sedimentation of the blood cells. The extraordinarily high centripetal acceleration makes such devices known as ultracentrifuges.

To solve this problem it is necessary to apply an energy balance equation in each of the states to assess what their respective relationship is.

By definition the energy balance is simply given by the change between the two states:

[tex]|\Delta E_{ij}| = |E_i-E_j|[/tex]

Our states are given by

[tex]E_1 = -11.7eV[/tex]

[tex]E_2 = -4.2eV[/tex]

[tex]E_3 = -3.3eV[/tex]

In this way the energy balance for the states would be given by,

[tex]|\Delta E_{12}| = |E_1-E_2|\\|\Delta E_{12}| = |-11.7-(-4.2)|\\|\Delta E_{12}| = 7.5eV\\[/tex]

[tex]|\Delta E_{13}| = |E_1-E_3|\\|\Delta E_{13}| = |-11.7-(-3.3)|\\|\Delta E_{13}| = 8.4eV[/tex]

[tex]|\Delta E_{23}| = |E_2-E_3|\\|\Delta E_{23}| = |-4.2-(-3.3)|\\|\Delta E_{23}| = 0.9eV[/tex]

Therefore the states of energy would be

Lowest : 0.9eV

Middle :7.5eV

Highest: 8.4eV

Answer:

A) 35.5N/m b) 20.1cm

Explanation:

Using Hooke's law;

F = Ke where F is the weight of the object = mass of the object in kg * acceleration due to gravity in m/s^2 and k if the force constant of the spring in N/m and e is the extension of the spring which original length of the spring - new length after extension in meters

For the first body, m*g = K * (0.25- li)

Where li is the initial length of the spring

0.175*9.81 = k(0.25-li)

1.72 = k(0.25-li) as equation 1

For the second body, m *g = K* ( 0.775-li)

2.075*9.81 = k (0.775-li) equation 2

20.36 = k(0.775-li)

Make li subject of the formula;

li = 0.775 - 20.36/k

Substitute for li in equation 1

1.72 = k(0.25- (0.775 - 20.36/k))

1.72 = k ( 0.25 - 0.775 + 20.36/k)

Open the bracket with k

1.72 = 0.25k - 0.775k + 20.36 (since k cancel k)

Collect the like terms:

1.72 - 20.36 = - 0.525k

- 18.64 = -0.525k

Divide both side by -0.525

-18.64/-0.525 = -0.525/-0.525k

K = 35.5N/m

B) substitute for k in using

li = 0.775 - 20.36/k

li = 0.775 - 20.36/35.5

li = 0.775 - 0.574

li = 0.201 in meters

li = 0.201 * 100 centimeters = 20.1cm

(A) The force constant of the spring is obtained as 34.66 N/m

(B) The unloaded length of the spring is 20 cm.

(A) According to Hooke's law;

[tex]F = kx[/tex]

Where 'F' is the force needed to extend or compress the spring, 'k' is the force constant and 'x' is the extended length or compressed length.

Here, the gravitational force of the mass provides the necessary force for the spring to elongate.

Therefore, we can say that in the case of first mass;

[tex]k\,(0.25-l_0) = m_1g = (0.175\,kg \times 9.8\,m/s^2)[/tex]

Where [tex]l_0[/tex] is the unloaded length of the spring.

[tex]\implies k\,(0.25-l_0)=1.715\,N[/tex]

In the case of the second mass, we can write;

[tex]k\,(0.775\,m-l_0) = m_2g = (2.075\,kg \times 9.8\,m/s^2)[/tex]

[tex]\implies k\,(0.775\,m-l_0) = 20.335\,N[/tex]

From both these equations, we can write;

[tex]k\,(0.775\,m-l_0-0.25\,m+l_0)=20.335\,N- 1.715\,N[/tex]

[tex]\implies0.525\, k=18.2\,N[/tex]

[tex]\therefore k=\frac{18.2\,N}{0.525\,m}=34.66\,N/m[/tex]

(B) Applying the value of 'k' in any of the equations for force of given masses, we get;

[tex]k\,(0.25-l_0)=1.715\,N[/tex]

[tex]\implies (34.66\,N/m)\times\,(0.25-l_0)=1.715\,N[/tex]

[tex]\implies 8.665N-34.66\,l_0=1.715\,N[/tex]

[tex]\implies \,l_0=\frac{-6.95N}{-34.66} =0.2\,m=20\,cm[/tex]

Learn more about Hooke's law here:

https://brainly.com/question/12253978

Answer:

122.6 nPa

Explanation:

Here ,

Intensity of incident light , I = 36.8 W/m^2

angle with area, θ = 0 degree

for a perfect absorber ,

radiation pressure = [tex]\frac{Icos\theta}{c}[/tex]

I=  Intensity of incident light, c= speed of light

radiation pressure =  [tex]\frac{36.8\times cos0}{3\times10^8}[/tex]

radiation pressure = 12.26×10^-8 Pa

radiation pressure = 122.6 nPa

the radiation pressure acting on the 122.6 nPa

Answer:

E)  I = 18.4 N.s

Explanation:

For this exercise let's use momentum momentum

     I = Δp = [tex]p_{f}[/tex]- p₀

The energy of the stone is only kinetic

    K = ½ m v²

The initial energy is Ko and the final is 70% Ko

     [tex]K_{f}[/tex] = 0.70 K₀

energy equation

     [tex]K_{f}[/tex] = 0.7 ½ m v₀²

You can also write

     [tex]K_{f}[/tex] = ½ m vf²

   ½ m vf² = ½ m (0.7 v₀²)

   [tex]v_{f}[/tex] = v₀ √ 0.7

Now we can calculate and imposed

     I = m (-vo √0.7) - m vo

     I = m vo (1 +√0.7

     I = 0.5000 20.0 (1.8366)

     I = 18.4 N.s

Answer:

v = 31.3 m / s

Explanation:

The law of the conservation of stable energy that if there are no frictional forces mechanical energy is conserved throughout the point.

Let's look for mechanical energy at two points, the highest where the body is at rest and the lowest where at the bottom of the plane

Highest point

       Em₀ = U = m g y

Lowest point

     [tex]Em_{f}[/tex] = K = ½ m v²

As there is no friction, mechanical energy is conserved

       Em₀ = [tex]Em_{f}[/tex]

       m g y = ½ m v²

       v = √ 2 g y

Where we can use trigonometry to find and

       sin 30 = y / L

       y = L sin 30

Let's replace

      v = RA (2 g L sin 30)

Let's calculate

      v = RA (2 9.8 100.0 sin30)

      v = 31.3 m / s

To solve this problem it is necessary to apply the concepts related to heat exchange and Entropy.

The temperature and mass remain constant, therefore the entropy values will be the only ones to change.

Of the three elements given their entropy values are given by

[tex]\Delta S_{iron}=0.45J/gmC[/tex]

[tex]\Delta S_{glass}=0.8J/gmC[/tex]

[tex]\Delta S_{water}= 4.186J/gmC[/tex]

Part A) From thermodynamic theory we know that temperature is inversely proportional to entropy

[tex]T = \frac{E}{\Delta S} \rightarrow[/tex] Energy remains constant

[tex]\Delta t \propto \frac{1}{S}[/tex]

Therefore the order would be

Lowest Temperature= Water

Medium Temperature= Glass

Highest Temperature=Iron

Part B) In the case of Energy the opposite happens because it is proportional to the entropy, then

[tex]E = T(\Delta S) \rightarrow[/tex]Temperature is constant

[tex]E \propto S[/tex]

Lowest Energy = Iron

Medium Energy = Glass

Highest Energy = Water

The temperature increase brought by a given amount of energy input depends on the material's specific heat capacity. Given a certain amount of energy, iron will heat up the most due to its low specific heat capacity. But if a certain temperature increase is desired, water, having high specific heat, will require the most energy.

The ranking of the samples after adding 100 J of energy can be determined by comparing their specific heat capacities. The specific heat capacity is the amount of heat necessary to raise the temperature of a substance by one degree Celsius.

Iron has a lower specific heat capacity than glass and water, meaning it will heat up more quickly when the same amount of energy is added. Thus, providing the same amount of energy (100 J) to each sample would result in the temperature of the iron increasing to the greatest extent, followed by the glass, and then the water.

Conversely, when each sample is to increase in temperature by the same amount (20°C), the amount of energy required will also be determined by the specific heat capacities. This time, however, the substance with the higher specific heat capacity will require more energy to achieve this temperature increase. Therefore, the water will require the most energy, followed by the glass, and then the iron.

https://brainly.com/question/28302909

#SPJ3

Answer:

a. Box 1

Explanation:

Hi there!

The momentum of the system box-ball is conserved in both cases because there is no external force applied on the system.

The momentum of the system is calculated as the sum of the momenta of each object that composes the system. The momentum is calculated as follows:

p = m · v

Where:

p =  momentum.

m = mass.

v = velocity.

Then, the momentum of the system before and after the collision will be:

System ball - box 1

initial momentum = final momentum

mb · vb + m1 · v1 = mb · vb´ + m1 · v1´

Where:

mb = mass of the ball.

vb = veloctiy of the ball.

m1 = mass of box 1.

v1 = velocity of box 1.

vb´ = final velocity of the ball.

v1´ = final velocity of box 1.  

Since the initial velocity of the box is zero:

mb · vb = mb · vb´ + m1 · v1´

Solving for v1´

mb · vb - mb · vb´ = m1 · v1´

mb · (vb - vb´) = m1 · v1´

mb · (vb - vb´) / m1 = v1´

Since vb´ is negative because the ball bounces back, then:

mb · (vb + vb´) / m1 = v1´

Now let´s express the momentum of the system ball - box 2

System ball -box 2

mb · vb + m2 · v2 = (mb + m2) · v2´

Since v2 = 0

mb · vb =  (mb + m2) · v2´

Solving for v2´:

mb · vb / (mb + m2) = v2´

Comparing the two expressions:

v2´ = mb · vb / (mb + m)

v1´ = mb · (vb + vb´) / m

In v1´ the numerator is greater than the numerator in v2´ because

vb + vb´> vb  

In v2´ the denominator is greater than the denominator in v1´ because

mb + m > m

then v1´ > v2´

Box 1 ends up moving faster than box 2

Answer:

7.72 Liters

Explanation:

normal body temperature = T_body =37° C

temperature of ice water = T_ice =0°c

specfic heat of water = c_{water} =4186J/kg.°C

if the person drink 1 liter of cold water mass of water is = m = 1.0kg

heat lost by body is Qwater =mc_{water} ΔT

                                           = mc{water} ( T_ice - T_body)

                                             = 1.0×4186× (0 -37)

                                             = -154.882 ×10^3 J

here negative sign indicates the energy lost by body in metabolic process energy expended due to brisk - hour long walk is Q_{walk} = 286 kilocalories

            = 286×4186J

so number of liters of ice water have to drink is

n×Q_{water} =Q_{walk}                                                                        n= Q_{walk}/ Q_{water}

= 286×4186J/154.882×10^3 J

 = 7.72 Liters

Answer:

[tex]V=7.73\ L[/tex]

Explanation:

Given:

Initial temperature of water,  [tex]T_i=0^{\circ}C[/tex]

final temperature of water, [tex]T_f=37^{\circ}C[/tex]

energy spent in one hour of walk, [tex]286\ kilocal=(286\times 4186)\ J[/tex]

volumetric capacity of stomach, [tex]V=1\ L[/tex]

Now, let m be the mass of water at zero degree Celsius to be drank to spend 286 kilo-calories of energy.

[tex]\therefore Q=m.c_w.\Delta T[/tex] .....................................(1)

where:

m = mass of water

Q = heat energy

[tex]c_w=4186\ J\ (specific\ heat\ of\ water)[/tex]

[tex]\Delta T[/tex]= temperature difference

Putting values in the eq. (1):

[tex]286\times 4186=m\times 4186\times 37[/tex]

[tex]m=7.73\ kg[/tex]

Since water has a density of 1 kilogram per liter, therefore the volume of water will be:

[tex]V=7.73\ L[/tex]

Final answer:

To calculate the sound intensity level, we use the formula I = (A² * ρ * v * f)/2. Plugging in the given values, the sound intensity level will be approximately 4.32 × 10⁻⁶ W/m².

Explanation:

To calculate the sound intensity level, we can use the formula:

I = (A² * ρ * v * f)/2

Where:

I is the sound intensity level,

A is the displacement amplitude,

ρ is the density of air,

v is the speed of sound,

f is the frequency of the sound wave.

Plugging in the given values, we have:

I = (2.00×10⁻⁸ m)² * 1.34 kg/m³ * 328 m/s * 530 Hz)/2

Simplifying the expression, the sound intensity level will be approximately 4.32 × 10⁻⁶ W/m².

Answer:

Crushing force will be [tex]2.026\times 10^5N[/tex]

Explanation:

We have given that atmospheric pressure [tex]P=1.013\times 10^5N/m^2[/tex]

Area is given as [tex]A=2m^2[/tex]

We have to find the force

We know that force is given by

[tex]Force=pressure\times area=1.013\times 10^5\times 2=2.026\times 10^5N[/tex]

The reason that we do not get crushed is because the force is distributed  over our bodies, and because we have air inside our bodies pushing outwards (the air in your blood,lungs, etc.). The pressure inside of our bodies keeps the air outside from crushing it.

Vertical distance, when the ball drops as it moves from the pitcher to the catcher is 1.048 meters.

The equation of motion is the relation between the distance, velocity, acceleration and time of a moving body.

The second equation of the motion for distance can be given as,

[tex]s=ut+\dfrac{1}{2}at^2[/tex]

Here, [tex]u[/tex] is the initial velocity, [tex]a[/tex] is the acceleration of the body and [tex]t[/tex] is the time taken by it.

Total time taken by the ball to reach to the catcher is the ratio of horizontal distance traveled by it to the speed of the ball.

As the speed of the ball is 40.2 m/s and the distance of the pitcher and the catcher is 18.6 meters. Thus the time of flight is,

[tex]t=\dfrac{18.6}{40.2}\\t=0.462\rm s[/tex]

Thus, total time taken by the ball to reach to the catcher is 0.462 seconds.

As the initial velocity of the ball is zero. Thus by the second equation of motion,

[tex]h=0+\dfrac{1}{2}(9.81)(0.462)^2\\h=1.048\rm m[/tex]

Thus, the vertical distance covered when the ball drops as it moves from the pitcher to the catcher is 1.048 meters.

Learn more about the equation of motion here;

https://brainly.com/question/13763238

The baseball dropped approximately 1.04 meters vertically while it traveled horizontally to the catcher.

The subject of this question is Physics, specifically related to the concept of projectile motion. To find the vertical distance that the ball drops, we'll use the principles of kinematics. In this case, the problem describes a horizontal launch, and we can find the vertical distance using the equation for distance in free fall under gravity: d = 0.5*gt^2, where g = 9.8 m/s^2 is the acceleration due to gravity. The time t can be found from the horizontal motion, by dividing the horizontal distance by the horizontal speed: t = 18.6 m / 40.2 m/s = 0.46 s. Using this time, we compute the vertical drop: d = 0.5*9.8 m/s^2*(0.46 s)^2 = 1.04 m. So, the ball drops by approximately 1.04 m while it travels horizontally to the catcher.

https://brainly.com/question/34917979

#SPJ2

Answer:

c. Both hit the ground with the same speed.

Explanation:

Given that speed of the both balls are same.

We know that kinetic energy given as

[tex]KE=\dfrac{1}{2}mv^2[/tex]

v=Speed  ,  m= mass

If mass of the the balls are same then their kinetic energy will be same.

The potential energy PE

PE= m g h

h =height

Given that h is same ,therefore their potential energy will be same.

But the time taken by both the balls will be different.

Therefore answer is c.

Both balls hit the ground with the same speed because they start with the same initial speed and experience the same influence of gravity. Hence, option (c) is the correct answer.

This question pertains to the principles of projectile motion. When two balls are thrown from the same height with the same initial speed, one straight up and one at a 45° angle, we can analyze their motion by breaking it into vertical and horizontal components.

Thus, the correct statement is (c) Both hit the ground with the same speed.

To solve this problem it is necessary to apply the concepts related to heat transfer and power depending on energy and time.

By definition we know that the heat loss of water is given by

[tex]Q = mc_w*\Delta T+m*L_f[/tex]

Where,

m = mass

[tex]c_w =[/tex] Specific Heat of Water

T = Temperature

[tex]L_f =[/tex]Latent heat of fusion [tex] \rightarrow[/tex] Heat of fusion for water at 0°C is [tex]3.35*10^5J/Kg[/tex]

Our values are given as,

m=53 kg

[tex]C=4180 J/kg\°C[/tex]

[tex]\Delta T=10-(-1)=11[/tex]

Replacing we have,

[tex]Q=53*4180*6+53*3.35*10^5[/tex]

[tex]Q = 19084240J[/tex]

Power can be defined as

[tex]P = \frac{Q}{t}[/tex]

Re-arrange to find t,

[tex]t = \frac{Q}{P}[/tex]

[tex]t = \frac{19084240}{1200}[/tex]

[tex]t = 15903.53s \approx 265 min \aprox 4.41h[/tex]

Therefore the time interval is 4.41h

The question revolves around the principle of thermal energy transfer and the specific heat of water. The water’s high specific heat absorbs a large amount of heat from the cellar and hence delays the freezing of the fruit by an additional 0.57 hours.

The subject of this question involves the principles of thermal Energy and heat transfer, specifically regarding the specific heat of water. The water in the tub has the ability to retain heat and slow down the cooling process of the space due to water's high specific heat capacity which is 4180 J/kg⋅°C. This means that water can absorb a lot of heat before its temperature rises.

Firstly, we need to calculate how much heat is the water in the tub able to absorb before its temperature reaches -1 °C (the freezing point of the fruit). This can be calculated with the formula for heat transfer Q = mcΔT, where m is the mass of water, c is the specific heat capacity of water, and ΔT is the change in temperature. In this case, ΔT is 10 - (-1) = 11 °C, so Q = 53 kg * 4180 J/kg⋅°C * 11 °C = 2,444,840 J of heat.

The cellar loses heat at a rate of 1200 J/s, which means to lose 2,444,840 J of heat it would require 2,444,840 J / 1200 J/s = 2,037.3 seconds, which is approximately 0.57 hours. So, the presence of the water in the tub delays the freezing of the fruit by an additional 0.57 hours.

https://brainly.com/question/16961806

#SPJ11

Answer

given,

diameter of the steel ball = 3 m = 0.003 m

density of the steel = 7600 kg/m³

density of liquid = 1200 kg/m³

distance travel by the ball = 0.5 m

time = t = 10 s

average velocity =[tex]v = \dfrac{0.5}{10}[/tex]

  v = 0.05 m/s

a) density of water is less than ball so, ball will fall in the fluid.

gravitational force is equal to buoyancy force and the drag force

[tex]F_g = F_b + F_d[/tex]

[tex]F_g = \rho_g Vg[/tex]

Density of ball = ρ_s

V is the volume ball

buoyancy force

[tex]F_b = \rho_f Vg[/tex]

[tex]F_b = \rho_f V g[/tex]

drag force

 [tex]F_d =3 \pi \mu d v[/tex]

[tex]F_g = F_b + F_d[/tex]

[tex] \rho_g Vg = \rho_f V g+ 3 \pi \mu d v[/tex]

[tex] (\rho_g - \rho_f)Vg = 3 \pi \mu d v[/tex]

[tex]V= \dfrac{1}{6}\pi d^3[/tex]

[tex] (\rho_g - \rho_f). \dfrac{1}{6}\pi d^3.g = 3 \pi \mu d v[/tex]

[tex]\mu = \dfrac{(\rho_s-\rho_f)d^2g}{18 v}[/tex]

[tex]\mu = \dfrac{(7600 -1200)\times 0.003^2\times 9.8 }{18 \times 0.05}[/tex]

μ = 0.63 kg m/s

Answer: a)2.542cm

Explanation:

According to area expansivity which is defined as change in area per unit area for degree rise in kelvin.

Area expansivity= A2-A1/A1(¶2-¶1)

A2-A1 is change in area

¶2-¶1 is temperature change

A2 if final area

A1 is initial area

¶2 is final temp = 91°C

¶1 is initial temp= 26°C

coefficient of linear expansion for steel is 11 ✕ 10−6 (°C)−1.

Area of the spherical steel ball = Πd²/4

A1= Π×2.54²/4

A1 = 5.07cm²

Area expansivity = 2×linear expansion = 2×11 ✕ 10−6 (°C)−1.

= 22 ✕ 10−6 (°C)−1.

Substituting in the formula to get final area A2

22 ✕ 10−6 (°C)−1 = A2-5.07/5.07(91-26)

22 ✕ 10−6 (°C)−1 = A2-5.07/329.55

A2-5.07 = 0.0073

A2 = 0.0073+5.07

A2= 5.0073cm²

To get final diameter

A2=Πd²/4

5.0073=Πd²/4

20.309 = Πd²

d² = 20.309/Π

d²=6.46

d= √6.46

d= 2.542cm

Explanation:

Given that,

Mass of the ball, m = 1.2 kg

Initial speed of the ball, u = 10 m/s

Height of the floor from ground, h = 32 m

(a) Let v is the final speed of the ball. It can be calculated using the conservation of energy as :

[tex]\dfrac{1}{2}mv^2=mgh[/tex]

[tex]v=\sqrt{2gh}[/tex]

[tex]v=\sqrt{2\times 9.8\times 32}[/tex]

v = -25.04 m/s (negative as it rebounds)

The impulse acting on the ball is equal to the change in momentum. It can be calculated as :

[tex]J=m(v-u)[/tex]

[tex]J=1.2\times (-25.04-10)[/tex]

J = -42.048 kg-m/s

(b) Time of contact, t = 0.02 s

Let F is the average force on the floor from by the ball. Impulse acting on an object is given by :

[tex]J=\dfrac{F}{t}[/tex]

[tex]F=J\times t[/tex]

[tex]F=42.048\times 0.02[/tex]

F = 0.8409 N

Hence, this is the required solution.

Answer:

66.98 db

Explanation:

We know that

[tex]L_T=L_S+10log(n)[/tex]

L_T= Total signal level in db

n= number of sources

L_S= signal level from signal source.

[tex]L_T=60+10 log(5)[/tex]

= 66.98 db

The combined sound level of five people talking at 60 dB each, given the logarithmic nature of the decibel scale, would be approximately 73 dB.

The sound level in decibels (dB), which is a measure of the sound's loudness, is calculated using the formula: B (dB) = 10 log( I / Io ) where B is the decibel level, I is the sound intensity, and Io is the reference intensity (10^-12 W/m² in this case). If one person talking is 60 dB then five people talking would add up logarithmically, not linearly, because the decibel scale is a logarithmic scale.

The formula to calculate the combined sound level of multiple sources is: Total dB = 10 log10 (10^(dB1/10) + 10^(dB2/10) + …). In our case, it would be Total dB = 10 log10 (5*10^(60/10)), which is approximately 73 dB.

https://brainly.com/question/15089336

#SPJ11

Answer:

θt = 514.3 revolutions

Explanation:

(1)The wheel accelerates uniformly from rest for 10 s and reaches the operating angular speed of 58rad/s.

The uniformly accelerated circular movement  a circular path movement in which the angular acceleration is constant.

We apply the equations of circular motion uniformly accelerated

ωf = ω₀ + α*t  Formula (1)

θ = ω₀*t + (1/2)*α*t² Formula (2)

ωf² = ω₀² +2*α*θ Formula (3)

Where:

θ : angle that the body has rotated in a given time interval (rad)

α : angular acceleration (rad/s²)

t : time interval (s)

ω₀ : initial angular speed ( rad/s)

ωf : final angular speed ( rad/s)

Number of revolutions made by the wheel from t = 0 to t = 10 s

Data

ω₀ = 0

t = 10 s

ωf = 58 rad/s

We replace data in the formula (1) to calculate α

ωf = ω₀ + α*t

58 = 0 + α*(10)

α = 58 /10

α = 5.8 rad/s²

We replace data in the formula (2) to calculate θ

θ = ω₀*t + (1/2)*α*t²

θ = 0 + (1/2)*( 5.8)*(10)²

θ₁ = 290 rad

(2)The wheel is run at that angular velocity for 30 s, and then power is shut off.

The movement of the wheel is circular with constant angular speed and the formula to calculate θ is:

θ = ω*t

ω = 58 rad/s  , t= 30s

θ = (58 rad/s)*(30)

θ = (58 rad/s)*(30)

θ ₂= 1740 rad

(3)The wheel slows down uniformly at 1.4 rad/s² until the wheel stops.

ω₀ = 58 rad/s

α = -1.4 rad/s²

ωf = 0

We replace data in the formula (3) to calculate θ

(ωf)² = (ω₀)² + (2)*(α )*θ

0 = (58)² + (2)*(-1.4)*θ

(2)*(1.4)*θ = (58)²

θ = (58)² / (2.8)

θ = (58)² / (2.8)

θ₃ = 1201.42 rad

Total number of revolutions made by the wheel (θt)

θt =θ₁+θ₂+θ₃

θt  = 290 rad+ 1740 rad + 1201.42 rad

θt  = 3231.42 rad

1 revolution = 2π rad

θt = 3231.42 rad* ( 1revolution/2π rad)

θt = 514.3 revolutions

Answer with Explanation:

We are given that

Electric field vector=[tex]\vec{E}=E\hat{i}[/tex]

Magnetic field vector=[tex]\vec{B}=-B\hat{j}[/tex]

We have to find the direction of propagation of the wave.

We know that  

The direction of propagation of wave=[tex]\vec{E}\times \vec{B}[/tex]

The direction of propagation of wave=[tex]\hat{i}\times (-\hat{j})=-\hat{k}[/tex]

Because ([tex]\hat{i}\times \hat{j}=\hat{k}[/tex])

The  wave propagate in -z direction.

Therefore, the component of the vector is (0,0,-1).

Hence, the direction of the propagation of wave is - z direction and component of direction of propagation vector is (0,0,-1).

The direction of propagation of an Electromagnetic wave is perpendicular to the electric and magnetic fields of the wave. In this case, the fields are along the x and negative y axes, so by applying the cross product, the propagation is in the positive z-direction, hence the unit vector would be 0,0,1.

In physics, an Electromagnetic wave has an electric field (E) and magnetic field (B) that are perpendicular to each other and the direction of propagation. These fields are also in phase with each other. Due to these properties, the direction of propagation can be calculated using the cross-product of vectors E and B.

By following the right-hand rule, if you imagine your fingers to curl from E towards B, your thumb will point in the direction of wave propagation. In this case, E = Ei (in the direction of the x-axis) and B = -Bj (in the direction of the negative y-axis).

Therefore, the cross-product E x B = E(-B)k^ (in the direction of the z-axis). Hence, the direction of the propagation Vector, P⃗, will be in the direction of the positive z-axis. For a unit vector, this would simply be 0,0,1.

https://brainly.com/question/20725306

#SPJ3

Answer:

a. The human body has nearly the same density as salt water after exhaling.

b. The human body will always float in the Dead Sea.

Explanation:

According to the concept of floating on the basis of  density, any body that is put in a fluid of density greater than its own density will always float due to the force of buoyancy from the liquid.

[tex]\rho_f.V_s=\rho_o.V_o[/tex]

where:

[tex]\rho_f=[/tex] density of the fluid

[tex]\rho_o=[/tex] density of the object

[tex]V_s=[/tex] volume of the object submerged in the fluid

[tex]V_o=[/tex] total volume of the object

To solve for the normal force, the forces in the vertical direction are balanced, considering gravity and the y-component of force [tex]F_2[/tex] which is approximately 24.211 N. For acceleration, the net force in the horizontal direction is calculated by adding force [tex]F_1[/tex] and the x-component of [tex]F_2[/tex], and subtracting kinetic friction, then divided by the mass which gives [tex]23.14 m/s^2[/tex] approximately.

The problem given requires us to calculate the magnitude of the normal force and the acceleration of the block using Newton's second law and the concepts of kinetic friction.

Part (a)

Firstly, to find the normal force, [tex]F_N[/tex], we need to consider the forces in the vertical (y) direction. The gravitational force (weight) acts downward with a magnitude of m × g, and the vertical component of [tex]F_2[/tex] acts upward. Additionally, the normal force acts upward, balancing these forces.

Thus, we have:

[tex]F_N + F_{2y} - m \times g = 0[/tex]

Where:

[tex]F_N[/tex] is the normal force

[tex]F_{2y} = F_2[/tex] × sin(θ) (the vertical component of [tex]F_2[/tex])

m × g is the weight of the block, m is the mass and g is the acceleration due to gravity, which is approximately [tex]9.81 m/s^2[/tex]

Plugging in the known values:

[tex]F_N[/tex] + 12.4 × sin(30°) - 3.1 × 9.81 = 0

[tex]F_N[/tex] = 3.1 × 9.81 - 12.4 × 0.5

[tex]F_N[/tex] = 30.411 - 6.2

[tex]F_N[/tex] = 24.211 N (approximately)

Part (b)

For the acceleration, a, we consider the forces in the horizontal (x) direction. The net force is the sum of the horizontal component of [tex]F_2[/tex] and [tex]F_1[/tex] minus the kinetic friction force, [tex]F_k[/tex].

The kinetic friction force, [tex]F_k[/tex], is given by:

[tex]F_k = \mu_k \times F_N[/tex]

And hence:

[tex]F_{net}[/tex] = [tex]F_1 + F_{2x} - F_k[/tex]

Using [tex]F_N[/tex] from the first section to find [tex]F_k[/tex] and then [tex]F_{net}[/tex], we get:

[tex]F_{net}[/tex] = 65 + 12.4 × cos(30°) - 0.2 × 24.211

Using Newton's second law, a = [tex]F_{net}[/tex] / m:

a = (65 + 12.4 × 0.866 - 0.2 × 24.211) / 3.1

a = (65 + 10.7424 - 4.8422) / 3.1

a = 71.7424 / 3.1

a = [tex]23.14 m/s^2[/tex] (approximately)

According to the information provided to define an average density, it is necessary to use the concepts related to mass calculation based on gravitational constants and radius, as well as the calculation of the volume of a sphere.

By definition we know that the mass of a body in this case of the earth is given as a function of

[tex]M = \frac{gr^2}{G}[/tex]

Where,

g= gravitational acceleration

G = Universal gravitational constant

r = radius (earth at this case)

All of this values we have,

[tex]g = 9.8m/s^2\\G  = 6.67*10^{-11} m^3/kg*s^2\\r = 6378*10^3 m[/tex]

Replacing at this equation we have that

[tex]M = \frac{gr^2}{G} \\M = \frac{(9.8)(6378*10^3)^2}{6.67*10^{-11}} \\M = 5.972*10^{24}kg[/tex]

The Volume of a Sphere is equal to

[tex]V = \frac{4}{3}\pi r^3\\V = \frac{4}{3} \pi (6378*10^3)^3\\V = 1.08*10^{21}m^3[/tex]

Therefore using the relation between mass, volume and density we have that

[tex]\rho = \frac{m}{V}\\\rho = \frac{5.972*10^{24}}{1.08*10^{21}}\\\rho = 5.52*10^3kg/m^3[/tex]