The pitch of a sound wave is related to wrich property?
A Wavelength
B. Amplitude
C. Volume
D . Frequency

Answer:

First blank is Speed, The Second Blank is Mass

Explanation:

Velocity is always speed and for mass thats just what they taught us>>>

Because velocity is a vector quantity, direction matters.

Velocity is the rate of change of displacement. It is essentially a vector quantity.

Speed of an object moving can never be negative. The velocity of a moving object can be zero.

Speed gives us an idea of how fast an object is moving whereas velocity not only tells us its speed but also tells us the direction the body is moving in.

Initial velocity describes how fast an object travels when gravity first applies force on the object. On the other hand, the final velocity is a vector quantity that measures the speed and direction of a moving body after it has reached its maximum acceleration.

The motion with constant velocity is the simplest form of motion.

Vector is the quantity that has both magnitude and direction.   For example, displacement, force, torque, momentum, acceleration, velocity, etc.

Thus, velocity has speed as well as direction, so it is vector quantity.

To learn more about Velocity here

https://brainly.com/question/18084516

#SPJ2

Answer:

Sure i can help you

Explanation:

6) The force pairs are drawn on the diagram to the left.

a. What is the action force acting on

The Rocket pushes out gas

b. What is the reaction force acting on?

Gas on the rocket

C. If the forces are equal and opposite why does the rocket ship move?

Answer: Rocket Is its own system, So gas creates outside force on the rocket

When natural gas is used to heat water, a conversion of chemical energy into thermal energy is taking place. The Option A.

In this process, natural gas which contains stored chemical energy undergoes combustion in a water heater. This combustion releases heat energy which is transferred to the water, raising its temperature.

The chemical energy in the natural gas is transformed into thermal energy leading to hot water for various domestic purposes such as bathing and heating.

This conversion helps in household heating systems and makes efficient use of the chemical energy stored in natural gas to provide thermal comfort and convenience in homes.

Read more about energy conversion://brainly.com/question/961052

#SPJ3

The conversion taking place when natural gas is used to heat water is 'chemical energy into thermal energy'. The energy from the chemical bonds in natural gas is released and changed to heat, which warms the water.

When natural gas is used to heat water, the type of conversion taking place is 'a chemical energy into thermal energy'. This happens because natural gas, a fossil fuel, is burned in this process. The energy stored in the chemical bonds of the gas is released and converted to thermal energy (heat), which is used to warm up the water.

https://brainly.com/question/20458806

#SPJ3

Answer:

False

Explanation:

It takes a bout 0.3 seconded for your body to response

Answer:

⊙false

Explanation:

Hope it help

Answer: At the molecular level, temperature is related to the random motions of the particles (atoms and molecules) in matter. ... The temperature of the puddle, or of any object, is a measure of the average of the individual translational energies of all of its atoms or molecules.

Explanation: my science teacher already tought us this

Answer:

stronger

Explanation:

its stronger because I don't have a good life for you guys but if I don't have a chance for it I can do it for you and I can get it to work on my own and then I can get a better idea

Final answer:

The electrostatic field created by a point charge is stronger the closer you are to the charge, due to the inverse relationship between field strength and distance. So the correct answer is option A.

Explanation:

The electrostatic field created by a point charge is stronger the closer you are to the charge. This is because the strength of the electrostatic field depends on the distance from the point charge, as described by Coulomb's Law. As the distance between charges decreases, the electrostatic force increases, resulting in a stronger field. When considering two unlike charges, the fields add together and become even stronger in the region between them because the fields from each charge are in the same direction. Conversely, the field is weaker at large distances, where the fields of individual charges may oppose each other, leading to a net effect of a weaker field. Examples from figures showing the electric fields demonstrate that field lines are closer together where the field is stronger, and farther apart where the field is weaker.

Answer: 2.7 x 10^5 joules

Explanation:

Given that:

Time taken = 3 minutes

convert time in minutes to seconds

(Since 1 minute = 60 seconds

3 minutes = 3 x 60 = 180 seconds)

Power of toaster = 1500 watt

Work done by the toaster = ?

Recall that power is the rate of work done per unit time

i.e Power = work/time

work = Power x Time

Work = 1500 watt x 180 seconds

Work = 270000J

Place the result in standard form

270000J = 2.7 x 10^5J

Thus, 2.7 x 10^5 joules of work is done by the toaster.

An electromagnetic wave can travel through a vacuum without a medium, while a mechanical wave requires a medium to propagate. The answer is option D.

One difference between an electromagnetic wave and a mechanical wave is how they propagate through space. An electromagnetic wave can travel through a vacuum without the need for a medium, whereas a mechanical wave must have a medium like air, water, or solids to travel through. This is because electromagnetic waves, which include light waves, are composed of oscillating electric and magnetic fields that can generate each other, whereas mechanical waves, like sound waves, rely on the vibration of particles in a medium to propagate.

Answer:

To distinguish results based on the only two variables of

awareness.

Explanation:

Final answer:

Scientists use two models of light: the wave model for interference and color observations, and the particle model for emission and absorption processes.

Explanation:

Scientists use two different models of light, namely the wave model and the particle model, because each is useful in explaining different phenomena associated with light.

While the wave model of light is excellent for describing scenarios such as the bending of light around edges, interference patterns, and observations of color, the particle model explains how light is emitted or absorbed by material.

Moreover, ray tracing, a more straightforward approach, is used for predicting images formed by lenses and mirrors, where light is interacting with objects much larger than a wavelength of light.

According to Essential Knowledge 6.F.4, the nature of light requires that different models are most appropriate at different scales. Furthermore, in the realm of quantitative models, a model of light propagation can predict outcomes that are testable and applicable in fields like lithography and sample analyses.

Thus, scientists often select a model based on the scale and context of the phenomenon they are investigating.

I h abitats is a boy or a party for me and you Friday the 13th to make a hoodie is better single

Answer:

the answer is 41.65 J

Final answer:

The kinetic energy of a bowling ball with a mass of 1.7 kg and a velocity of 7.0 m/s is calculated using the kinetic energy formula KE = 1/2 mv^2, resulting in a kinetic energy of 41.65 joules.

Explanation:

The subject of this question is physics, specifically covering the topic of kinetic energy which is a part of mechanical energy. The grade level of this question is high school. To calculate the kinetic energy of the bowling ball, we use the kinetic energy formula:

KE = ½ mv² where KE is kinetic energy, m is mass in kilograms, and v is velocity in meters per second.

Plugging in the given values (mass m = 1.7 kg, velocity v = 7.0 m/s), the calculation is as follows:

KE = ½ × 1.7 kg × (7.0 m/s)²

KE = 0.85 kg × 49 m²/s²

KE = 41.65 joules

So, the kinetic energy of the bowling ball is 41.65 joules.

Answer:

4950 meters

Explanation:

Recall that the formula for the speed (v) is given by the quotient of the distance traveled (d)  divided by the time (t) it took to cover that distance:

[tex]v=\frac{d}{t}[/tex]

Therefore, for this case in which the car travels at 55 m/s for 90 seconds, we can replace these values in the formula, and solve for the distance covered:

[tex]v =\frac{d}{t} \\55 \frac{m}{s} =\frac{d}{90\,s} \\d=55*90 m\\\\d=4950\,m[/tex]

Answer:

B.) A woolly mammoth fossil

Explanation:

Carbon-14 dating is normally used to find the age of a once-living object.

C and D are not accurate because they both refer to types of igneous rocks -- only sedimentary rocks can be used for Carbon Dating.

A isn't accurate because dinosaurs lived a very, very long time ago, therefore, the isotopes wouldn't be detectable during modern times.

Though woolly mammoths lived a long time ago, it is a short time compared to the long time gap between dinosaurs and modern era. Radioactive isotopes may still be present in a woolly mammoth fossil sample.

Answer:

Friction between the box and the floor is 25N to the left

Explanation:

There are two forces acting on the box along the horizontal direction:

- The force of push applied by the worker, in the forward direction, F

- The force of friction, [tex]F_f[/tex], acting in the opposite direction (backward)

So the net force acting on the box is

[tex]F_{net}=F-F_f[/tex]

According to Newton's second law of motion, the net force on an object is equal to the product between its mass (m) and its acceleration (a), so we can write:

[tex]F_{net}=ma[/tex]

And so

[tex]F-F_f = ma[/tex]

However, in this case the box is moving at constant speed; this means that its acceleration is zero:

[tex]a=0[/tex]

Therefore we have:

[tex]F-F_f=0[/tex]

Which means

[tex]F_f=F[/tex]

And since we are told that

[tex]F=25 N[/tex]

This means that the force of friction is also 25 N:

[tex]F_f=F=25 N[/tex]

Answer:

C.Friction between the box and the floor is 25N to the left.

Explanation:

One can conclude that the friction between the box and the floor is 25N to the left.

Frictional force is a force that opposes motion of a body. It acts in the opposite direction as the net force applied on a body.

Answer: 313.24K

Explanation:

Given that:

Initial air pressure P1 = 210kPa

Initial Temperature T1 = 26°C

(Since, the SI unit of temperature is Kelvin, convert temperature in celsius to kelvin

26°C + 273 = 299K)

Final temperature T2 = ?

Final pressure P2 = 220kPa

Since, pressure and temperature are involved while volume is constant, apply the formula for pressure law

P1/T1 = P2/T2

210kPa/299K = 220kPa/T2

Cross multiply

210kPa x T2 = 220kPa x 299K

210 x T2 = 65780

T2 = (65780/210)

T2 = 313.24K

Thus, the temperature of the air in the tyre is 313.24K

Answer:

A catalyst is a chemical substance that affects the rate of a chemical reaction by altering the activation energy required for the reaction to proceed. This process is called catalysis. A catalyst is not consumed by the reaction and it may participate in multiple reactions at a time.

Explanation:

a

Answer:

The answer is A.

Explanation:

Since you're increasing the energy, the frequency would start increasing. The wavelength would start decreasing, since you're putting more energy into the slinky and making it go faster and faster.

Answer: 4.41 joules

Explanation:

Given that:

work is done by gravity = ?

Mass of pine cone (m) = 50g

Convert mass in grams to kilograms

Since 1000g = 1kg

50g = (50/1000) = 0.05kg

Height of tree (h) = 9 m

Apply the formula for work,

Work = mass x acceleration due to gravity x height

Acceleration due to gravity has a value of 9.8m/s^2

Work = mgh

Work = 0.05kg x 9.8ms^2 x 9m

Work = 4.41J

Thus, 4.41 joules of work is done by gravity.

Answer:

4.5 J

Explanation:

I took the test

Answer: B) The measure of angle B equals the measure of angle C.

Answer:

False

Explanation:

It is false because the greater the force, the greater the friction.

There is a misspelling: "change in personality is 5M/S". It should be "change in velocity is 5m/s"

Answer: 0.5 m/s^2

Explanation:

acceleration = ?

change in velocity = 5m/s

Time = 10 seconds

Acceleration is the rate of change of velocity per unit time. it is measured in metres per second square.

i.e Acc = (change in velocity) time

Acc = 5m/s / 10 seconds

Acc = 0.5 m/s^2

Thus, the acceleration is 0.5 m/s^2

Answer:

Position 3 has the most kinetic energy

Position 1 has the least potential energy

Explanation:

Kinetic energy: It is the moust because the iver is falling straight down

Potential energy:  It is the least because of how he is positioned, it's nearly straight.

The point at which the diver has the greatest kinetic energy and the least potential energy is at point 4.

To explain why, let's break down the concepts of kinetic and potential energy in the context of the diver's motion.

1. Kinetic Energy (KE): This is the energy associated with an object in motion. It depends on both the mass of the object and its velocity. KE = (1/2)mv^2, where "m" is the mass and "v" is the velocity.

2. Potential Energy (PE): In the case of a diver on a diving board, potential energy is gravitational potential energy. It is the energy an object has due to its position relative to a reference point (usually the ground). PE = mgh, where "m" is the mass, "g" is the acceleration due to gravity, and "h" is the height above the reference point.

At point 1, the diver is at the highest point on the diving board. Therefore, the potential energy is at its maximum because the height above the reference point (the water surface) is the greatest. At this point, the diver has little or no kinetic energy because they are momentarily at rest.

As the diver descends from point 1 to point 4, their height above the water decreases, reducing their potential energy. Simultaneously, their velocity increases, which means their kinetic energy also increases.

At point 4, the diver is at the lowest point of their dive, very close to the water surface. Here, their potential energy is minimal, as they are close to the reference point. At the same time, their velocity is at its maximum, resulting in the highest kinetic energy.

In conclusion, point 4 represents the moment of the greatest kinetic energy and the least potential energy because the diver is in rapid motion close to the water's surface, having converted most of their potential energy into kinetic energy during the dive.

For more such questions on kinetic energy:

https://brainly.com/question/8101588

#SPJ2

Answer:

Braking distance of vehicle is 9.97 m

Explanation:

It is given initial velocity of the vehicle u = 13.4 m/sec

Acceleration of the vehicle [tex]a=-9m/sec^2[/tex]

As the vehicle finally stops so final velocity of the vehicle v = 0 m/sec

We have to find the braking distance s

From third equation of motion

[tex]v^2=u^2+2as[/tex]

[tex]0^2=13.4^2+2\times -9\times s[/tex]

s = 9.97 m

So braking distance of the vehicle is 9.97 m

Answer: 23m/s

Explanation:

Given that:

Mass of soccer ball = 0.450kg

kinetic energy = 119 J

velocity of the soccer ball = ?

Kinetic energy is the energy possessed by a moving object. It is measured in joules, and depends on the mass (m) of the object and the velocity (v) by which it moves

i.e K.E = 1/2mv^2

119J = 1/2 x 0.450kg x v^2

119J = 0.225kg x v^2

v^2 = 119J / 0.225kg

v^2 = 528.9

To get the value of velocity, find the square root of v

v = √528.9

v = 22.997m/s (Round result to 23)

Thus, the velocity of the soccer ball is 23m/s

Answer:

a: Repeat the experiment several times in order to verify the results

Explanation:

Computer simulations are models. They follow specific instructions and act based on those set of parameters.

Models study a part of the real world and makes useful inference from them. It is often common place to observe discrepancies between computer simulation and what is found in the actual experiment.

The most efficient thing to do is to run and repeat the experiment several times so as to verify the result. It will also help the precision and to know how accurate the readings might be.

Answer:

The iron ball is suspended from a box that floats in water. The box has a height of 5.00 cm, a face area of 10.0 cm ​ 2 ​ , and a density of 0.30 g/cm3, and 2.00 cm of its height is above the water surface. What’s the radius of the ball? Hints: ❏ Identify all forces acting on the box and write Newton’s second law. ❏ The box is stationary, which means the forces (including buoyant force) are balanced. You can use this to find tension in the rope. ❏ Identify all forces acting on the ball and write Newton’s second law. ❏ Iron ball is stationary, which means the forces (including buoyant force) are balanced.

Step by step:

If you traveled to Mars, your mass would be exactly, precisely equal to your mass on Earth, PROVIDED you did not relieve the boredom of space travel by eating too many astronaut steaks along the way.

The only things that can affect your mass are your personal diet, exercise, sleep, and stress habits.  

Your mass has nothing to do with gravity. Your WEIGHT has.