Answer : The process in which sediment is dropped and comes to rest is called, Deposition.
Explanation:
Deposition : It is a type of process in which the molecules are settle down at the bottom of the container. In this process, there is no intermolecular space present between the atoms of molecule.
This process results in the formation of the sedimentary rocks which are made out of ice, wind and water flows which carry particles in the suspension.
Hence, the process in which sediment is dropped and comes to rest is called, Deposition.
Titration Lab Sheet: Day 2 (Alternate)‼️‼️‼️
Answer:
See explanation below
Explanation:
As the problem states, this is an acid base titration, and both titrations are already saying that they were both neutralized. When an acid base titration is neutralized, means that it reach it's equivalence point. In this point, we can say that the moles of the acid are the same moles of the base. In other words the following:
n₁ = n₂ (1)
1 is the acid and 2 is the base.
You should note that the above expression is real when the mole ratio is 1:1. When it's not, we need to see the mole ratio and then, adjust the expression to that.
the moles can also be expressed as:
n = M * V
Replacing in the first expression we have:
M₁V₁ = M₂V₂ (2)
With this expression we can calculate either the volume or concentration of the compounds given. Let's do this by parts:
Titration 1:
In this case we have KOH and H₂SO₄, so the balanced reaction would be:
2KOH + H₂SO₄ -------> K₂SO₄ + 2H₂O
As you can see, we have 2 moles of KOH and 1 mole of the acid, so the mole ratio is 2:1, therefore, expression (2) becomes:
M₁V₁ = 2M₂V₂
From here, we solve for concentration of the acid (M₁)
M₁ = 2M₂V₂ / V₁
Replacing the given values we have:
M₁ = 2 * 25 * 0.15 / 15
M₁ = 0.5 MThis is the concentration of the acid.Now, how can we fill the chart? Is easy, we just put the obtained values:
For the acid it would be:
Solution: H₂SO₄; Molar ratio: 1; Volume: 15 mL; Concentration: 0.5 M
For the base:
Solution: KOH; Molar ratio: 2; Volume: 25 mL; Concentration: 0.15 M
Titration 2:
In this case we do the same thing as before but with different data. First the equation:
HBr + NaOH --------> NaBr + H₂O
The equation is already balanced and we can see a mole ratio of 1:1, so we can use expression (2) and solve for concentration of the base instead:
M₁V₁ = M₂V₂
M₂ = M₁V₁ / V₂
M₂ = 30 * 0.250 / 20
M₂ = 0.375 MThis is the concentration of the base.The chart can be filled the same way as in titration 1:
For the acid it would be:
Solution: HBr; Molar ratio: 1; Volume: 30 mL; Concentration: 0.25 M
For the base:
Solution: NaOH; Molar ratio: 1; Volume: 20 mL; Concentration: 0.375 M
which has not been a major source of CFCs
Answer:
• televisions
If there is a third-quarter moon on July 2, what is the approximate date of the next full moon?
Answer:
C JULY 23RD
Explanation
The approximate date of the next full moon can be estimated to be approximately 22.5 days after July 2.
Explanation:The approximate date of the next full moon can be estimated by calculating the time it takes for the Moon to go through its phases. According to the information provided, it takes about 29.5 days for the Moon to complete a full cycle of phases. Since the third quarter moon occurs about a week after the full moon, we can estimate that the next full moon would be approximately 22.5 days after July 2. So, if the third-quarter moon was observed on July 2, the approximate date for the next full moon would be roughly July 9 or 10, depending on the exact time of the third-quarter phase.
Learn more about Moon Phases here:https://brainly.com/question/31392459
#SPJ13
a rock has a density of 15 g/cm3 and a mass of 50 g is dropped into a 100ml graduated cylinder containing 55 ml of water. to what height will the water rise in the cylinder
How many grams of sodium chloride must dissolve in 750.0 g of water to make a 0.50 molal solution?
Final answer:
To make a 0.50 molal solution of NaCl with 750.0 g of water, 21.92 grams of sodium chloride must be dissolved in the water.
Explanation:
To calculate how many grams of sodium chloride (NaCl) are needed to make a 0.50 molal (m) solution with 750.0 g of water, we should understand the definition of molality. Molality is the number of moles of solute per kilogram of solvent. Therefore, a 0.50 molal solution of NaCl requires 0.50 moles of NaCl dissolved in each kilogram (1000 grams) of water. Since we have 750.0 g or 0.750 kg of water, we will adjust this proportionally.
First, calculate the moles of NaCl needed:
0.50 mol/kg × 0.750 kg = 0.375 molNext, convert the moles of NaCl to grams. The molar mass of NaCl is approximately 58.44 g/mol:
0.375 mol × 58.44 g/mol = 21.92 gTherefore, 21.92 grams of sodium chloride must dissolve in 750.0 g of water to make a 0.50 molal solution.
3. When two atoms of 2H (deuterium) are fused to form one atom of 4He (helium), the total energy evolved is 3.83 × 10-12 joules. What is the total change in mass (in kilograms) for this reaction?
4. The mass of a proton is 1.00728 atomic mass units (amu) and the mass of a neutron is
60Co nucleus whose nuclear mass is 1.00867 amu. What is the mass defect (in amu) of a 27
59.9338 amu? What is the mass defect in kilograms? What is the energy equivalent of this mass in kilojoules?
5. The equation shows one mole of ethanol fuel being burned in oxygen. Convert the energy released into its equivalent mass.
C2H5OH(l) + 3 O2(g) 2 CO2(g) + 3 H2O (l) ΔH = -1418 kJ/mol
Answer:
For 3: The total mass change of the reaction is [tex]4.255\times 10^{3}kg[/tex]
For 4: The mass defect is [tex]0.911\times 10^{-27}kg[/tex] and energy equivalent to this mass is [tex]8.199\times 10^{-14}kJ[/tex]
For 5: The equivalent mass of the reaction is [tex]1.5755\times 10^{-11}kg[/tex]
Explanation:
For 3:To calculate the mass change of the reaction for given energy released, we use Einstein's equation:
[tex]E=\Delta mc^2[/tex]
E = Energy released = [tex]3.83\times 10^{-12}J[/tex]
[tex]\Delta m[/tex] = mass change = ?
c = speed of light = [tex]3\times 10^8m/s[/tex]
Putting values in above equation, we get:
[tex]3.83\times 10^{-12}Kgm^2/s^2=\Delta m\times (3\times 10^8m/s)^2\\\\\Delta m=4.255\times 10^3kg[/tex]
Hence, the total mass change of the reaction is [tex]4.255\times 10^{3}kg[/tex]
For 4:For the given isotopic representation: [tex]_{27}^{60}\textrm{Co}[/tex]
Atomic number = Number of protons = 27
Mass number = 60
Number of neutrons = Mass number - Atomic number = 60 - 27 = 33
To calculate the mass defect of the nucleus, we use the equation:
[tex]\Delta m=[(n_p\times m_p)+(n_n\times m_n)+]-M[/tex]
where,
[tex]n_p[/tex] = number of protons = 27
[tex]m_p[/tex] = mass of one proton = 1.00728 amu
[tex]n_n[/tex] = number of neutrons = 33
[tex]m_n[/tex] = mass of one neutron = 1.00867 amu
M = Nuclear mass number = 59.9338 amu
Putting values in above equation, we get:
[tex]\Delta m=[(27\times 1.00728)+(33\times 1.00867)]-[59.9338]\\\\\Delta m=0.54887amu[/tex]
Converting the value of amu into kilograms, we use the conversion factor:
[tex]1amu=1.66\times 10^{-27}kg[/tex]
So, [tex]0.54887amu=0.54887\times 1.66\times 10^{-27}kg=0.911\times 10^{-27}kg[/tex]
To calculate the equivalent energy, we use the equation:
[tex]E=\Delta mc^2[/tex]
E = Energy released = ?
[tex]\Delta m[/tex] = mass change = [tex]0.911\times 10^{-27}kg[/tex]
c = speed of light = [tex]3\times 10^8m/s[/tex]
Putting values in above equation, we get:
[tex]E=(0.911\times 10^{-27}kg)\times (3\times 10^8m/s)^2\\\\E=8.199\times 10^{-11}J[/tex]
Converting this into kilojoules, we use the conversion factor:
1 kJ = 1000 J
So, [tex]8.199\times 10^{-11}J=8.199\times 10^{-14}kJ[/tex]
Hence, the mass defect is [tex]0.911\times 10^{-27}kg[/tex] and energy equivalent to this mass is [tex]8.199\times 10^{-14}kJ[/tex]
For 5:For the given chemical reaction:
[tex]C_2H_5OH(l)+3O_2(g)\rightarrow 2CO_2(g)+3H_2O(l);\Delta H=-1418kJ/mol[/tex]
To calculate the equivalent mass of the reaction for given energy released, we use Einstein's equation:
[tex]E=\Delta mc^2[/tex]
E = Energy released = [tex]1418kJ=1418\times 10^3J[/tex]
[tex]\Delta m[/tex] = mass change = ?
c = speed of light = [tex]3\times 10^8m/s[/tex]
Putting values in above equation, we get:
[tex]1418\times 10^{3}Kgm^2/s^2=\Delta m\times (3\times 10^8m/s)^2\\\\\Delta m=1.5755\times 10^{-11}kg[/tex]
Hence, the equivalent mass of the reaction is [tex]1.5755\times 10^{-11}kg[/tex]
Abusive head trauma is usually associated with a parent or caregiver becoming angry or frustrated.
a. True
b. False
Which product of the ultraviolet decomposition of cfcs acts as the catalyst for ozone decomposition?
The chlorine atom released from the ultraviolet decomposition of CFCs acts as a catalyst for the decomposition of ozone in the atmosphere.
The product of the ultraviolet decomposition of chlorofluorocarbons (CFCs) that acts as a catalyst for ozone decomposition is the highly reactive chlorine atom (Cl). When CFCs like CCl₂F₂ are exposed to UV radiation, a chlorine atom is released due to the photolytic cleavage of the CFC molecule. This chlorine atom can then catalyze the destruction of ozone by participating in a series of reactions where it converts ozone (O3) into oxygen gas (O2), regenerating the chlorine atom to continue the cycle of ozone depletion.
A simplified mechanism of this process is as follows:
Cl + O₃ → ClO + O₂ClO + O → Cl + O₂These reactions demonstrate how chlorine liberated from CFCs can lead to the breakdown of a large number of ozone molecules, thus significantly contributing to ozone layer depletion.
When placed in water, ice rises to the top of the liquid. unlike most solids that sink when placed in their liquid forms, ice floats because -?
Water is capable of dissolving a variety of different substances, which is why it is such a good solvent. it is often called the universal solvent because it dissolves more substances than any other liquid. the reason for this is best explain by which of these?
Water is often referred as a universal solvent because it is capable dissolving much more solutes as compared to any other solvent. This is because, water is a high polar molecule. In water, H has partial positive charge while O has partial negative charge.
Due to this, water favors dissociation of molecules into positively and negatively charged ions. Positively charge ions gets attracted towards oxygen i.e. negatively charges, while negatively charged ions get attracted towards positive end of water molecule.
However, it is worth nothing that, despite water being referred as universal solvent, many compounds are insoluble or partially soluble in water. For instance, most of the hydroxide displays poor solubility in water.
Answer:
Water is polar with a positive and negative side.
I hope this helps! Good luck on your test!
Given the balanced ionic equation representing a reaction: 2al(s) + 3cu2+(aq) → 2al3+(aq) + 3cu(s)which half-reaction represents the reduction that occurs?al → al3+ +3eal3+ +3e → alcu→ cu2+ +2ecu2+ + 2e → cu
Option D : [tex]Cu^{2+}(aq)+2 e^{-}\rightarrow Cu(s)[/tex]
Reduction take place when oxidation state of atom of an element decrease. Here, addition of electron/s takes place. Opposite to that in oxidation, oxidation state increases and here, loss of electron/s take place.
The balanced chemical equation is as follows:
[tex]2Al(s)+3Cu^{2+}(aq)\rightarrow 2Al^{3+}(aq)+3Cu(s)[/tex]
Here, oxidation state of Al changes from zero to +3 thus, it undergoes oxidation and oxidation state of Cu changes from +2 to zero thus, it undergoes reduction.
The half reactions will be:
Oxidation: [tex]Al(s)\rightarrow Al^{3+}(aq)+3e^{-}[/tex]
Reduction: [tex]Cu^{2+}(aq)+2 e^{-}\rightarrow Cu(s)[/tex]
Therefore, option D is correct.
The ionic equation represents the electrolytes in the dissociated ion form in the aqueous solution. Half-reaction which represents the reduction is the increased number of electrons in the copper atom.
What is reduction?Reduction in the chemical reaction is the increase in the number of electrons in the atoms, while oxidation is the decrease in the number of electrons from an atom.
The balanced chemical reaction is shown as:
[tex]\rm 2Al + 3Cu^{2+} \rightarrow 2Al^{3+} + 3Cu[/tex]
Reduction occurs when the oxidation number of the atom decreases and electrons are added to it. In the reaction the oxidation number of copper changes from +2 to 0 hence, undergoes reduction.
The half-reaction of the equation is written as,
Oxidation: [tex]\rm Al \rightarrow Al^{3+} + 3e^{-}[/tex]
Reduction: [tex]\rm Cu^{2+} + 2e^{-} \rightarrow Cu[/tex]
Therefore, reduction takes place at option D. [tex]\rm Cu^{2+} + 2e^{-} \rightarrow Cu.[/tex]
Learn more about reduction here:
https://brainly.com/question/13896138
#SPJ3
) place these types of bonds in order from the strongest to the weakest (covalent, hydrogen, ionic, van der waals)?
How many moles of potassium hydroxide are needed to complete neutralize 1.50 moles of sulfuric acid (h2so4). please show all work. 2koh + h2so4 -> k2so4 + 2h2o?
Which of the following best predicts the outcome of a fission reaction involving uranium-235?
Two U-235 atoms form bonds with each other, absorbing a large amount of energy.
An atom of U-235 absorbs electrons, undergoes an increase in energy level, and splits into fragments.
The nuclei of two U-235 atoms join together to form a heavier uranium isotope, and energy is released.
The nucleus of an atom of U-235 splits, resulting in two smaller fragments and the release of a large amount of energy.
Answer:
The nucleus of an atom of U-235 splits, resulting in two smaller fragments and the release of a large amount of energy
Explanation:
In the fission reaction U-235 absorbs one neutron and breaks into two new atoms (also known as fission fragments) and three neutrons with the release of massive amount of energy.
The nuclear fission reaction is as follows:
¹₀n + ²³⁵₉₂U → ¹⁴¹₅₆Ba + ⁹²₃₉Kr + 3 ¹₀n
U-235 has a half life of 703.8 million years. In the fission reaction massive amount of energy 202.5 MeV is released.
Which of the following is not always true about synthesis reaction
Answer is: There is only one reactant.
Synthesis reaction is a type of reaction in which multiple reactants combine to form a single product.
For example, balanced chemical reaction: Ba + F₂ → BaF₂.
In barium fluoride, barium has oxidation number +2 and fluorine has oxidation number -1, so compound has neutral charge.
Second chemical reaction: CaO(s) + H₂O(l) → Ca(OH)₂(aq).
One molecule is produced from two molecules.
A synthesis reaction typically involves substrates bonding to form larger molecules, but the process is not always linear, may involve multiple steps and intermediates, and can include unexpected outcomes like isomerization or complex cyclization patterns.
Explanation:One aspect that is not always true about a synthesis reaction is that they do not necessarily occur in a linear fashion. A synthesis reaction, in chemistry, usually involves two or more substrates reacting to form a larger molecule, commonly expressed as A + B → AB. This process generally requires energy to form new bonds. However, it is not always a straightforward single step; multiple-step synthesis may be involved, where intermediate products are formed before the final molecule is synthesized.
Moreover, certain synthesis reactions, like those leading to the formation of allenes and alkynes, may competewith isomerization processes, leading to a mix of products rather than a single, pure compound. Also, not all synthesis reactions strictly follow predictable rules like Markovikov's rule, which is often used to predict the outcome of electrophilic addition reactions. In cases where the molecular geometry affects reactivity, the result of a synthesis reaction might diverge from expected patterns.
Finally, the complexity of the molecular structure being synthesized can affect the nature of the synthesis reaction. For example, schemes involving cyclization can lead to the formation of multiple new rings in a compound, demonstrating that synthesis can be a versatile tool for constructing complex molecules.
What element has the electron configuration 1s22s22p63s23p64s23d104p65s24d105p66s24f145d106p2?
Answer:
Lead, Pb
Explanation:
Electron configuration of an element depicts the arrangement or the distribution of electrons in different energy levels (orbitals) within the atom. This arrangement is based on the Aufbau principle which states that the electrons are added such the orbital with the lowest energy gets filled up first.
The given electron configuration is:
1s²2s²2p⁶3s²3p⁶4s²3d¹⁰4p⁶5s²4d¹⁰5p⁶6s²4f¹⁴5d¹⁰6p²
The total number of electrons = 82
For a neutral atom; number of electrons = atomic number(Z)
Based on the periodic table, the element with atomic number = 82 is lead (Pb).
What is a characteristic of expressionist wassily kandinsky's improvisation 31?
Final answer:
The characteristics of Wassily Kandinsky's Improvisation 31 show his innovative use of color and line for their own sake, reflecting his move towards pure abstraction and exploring the emotional and spiritual qualities of art.
Explanation:
A characteristic of Wassily Kandinsky's Improvisation 31 is the use of color and line for their own sake, not to represent something specific. Kandinsky aimed to create a sense of rhythm and staccato in the painting, infusing it with musicality through abstract elements.
Improvisation 31, like many of Kandinsky's works, reflects his move towards pure abstraction and his interest in the spiritual and emotional aspects of art. The painting is a representation of the Expressionist movement in early 20th-century art, seeking to convey inner emotions rather than outward impressions.
Impressionism 31 showcases Kandinsky's innovative approach to art, breaking away from traditional representation and embracing the freedom of abstract expression, marking a significant shift in the art world. Through his use of color, line, and form, Kandinsky creates a visually dynamic and emotionally evocative piece that invites viewers to explore the depths of their subconscious.
Metallic copper is formed when aluminum reacts with copper(ii) sulfate. how many grams of metallic copper can be obtained when 54.0 g of al react with 319 g of cuso4? al + 3cuso4 â al2(so4)3 + 3cu
Answer: 127 g
Explanation:
What net ionic equation describes the reaction when these solutions are mixed?
Na3PO4 (aq) + CaCl2(aq) →
Na+(aq) + Cl– (aq) → NaCl(s)
2Ca2+(aq) + Na+(aq) → NaCa2(s)
2PO43–(aq) + 3Ca2+(aq) → Ca3(PO4)2(s)
2PO43–(aq) + Cl– (aq) → Cl2(PO4)3(s)
Answer:
Net ionic reaction: 2PO₄³⁻(aq) + 3Ca²⁺(aq) → Ca₃(PO₄)₂(s).
Determine the concentration of an unknown acid or base in a neutralization reaction
An attraction between molecules on the surface of a liquid Is a what?
Which of the following bases can be ingested safely?
aluminum hydroxide
sodium hydroxide
calcium hydroxide
ammonia
Final answer:
Aluminum hydroxide can be safely ingested in small amounts as it's used in antacids, while sodium hydroxide, calcium hydroxide, and ammonia have various uses but are not safe to ingest in their industrial forms.
Explanation:
The student is asking about which bases can be safely ingested. Among the options given, aluminum hydroxide is a compound that can be ingested safely in small amounts, as it is often used in antacids to combat excess stomach acid. Sodium hydroxide, commonly found in drain cleaner, and calcium hydroxide, though it is used in food processing, must be consumed in very limited amounts because of their high reactivity and potential for causing harm. Ammonia is a weak base and is used in cleaning products; it should not be ingested due to its toxicity. It is important to note that while some bases can be ingested in medicinal or food-grade forms, their industrial counterparts used in cleaning and other products can be harmful and should not be ingested.
How many ethyne molecules are contained in 84.3 grams of ethyne (C2H2)?
Explanation:
According to the mole concept, there are [tex]6.022 \times 10^{23}[/tex] atoms or molecules present in 1 mole.
As, it is given that mass of ethyne is 84.3 g. Hence, calculate its number of moles as follows.
No. of moles = [tex]\frac{mass}{\text{molar mass}}[/tex]
= [tex]\frac{84.3 g}{26.04 g/mol}[/tex]
= 3.24 mol
Therefore, calculate number of ethyne molecules as follows.
[tex]3.24 mol \times 6.022 \times 10^{23}[/tex] atoms
= [tex]19.51 \times 10^{23}[/tex] atoms
Thus, we can conclude that there are [tex]19.51 \times 10^{23}[/tex] atoms in 84.3 grams of ethyne.
The net ionic equation for the reaction between aqueous sulfuric acid and aqueous sodium hydroxide is ________.
a.h+ (aq) + hso4- (aq) + 2oh- (aq) → 2h2o (l) + so42- (aq)
b.h+ (aq) + hso4- (aq) + 2na+ (aq) + 2oh- (aq) → 2h2o (l) + 2na+ (aq) + so42-(aq)
c.so42- (aq) + 2na+ (aq) → 2na+ (aq) + so42-(aq)
d.h+ (aq) + oh- (aq) → h2o( l)
e.2h+ (aq) + so42- (aq) + 2na+ (aq) + 2oh- (aq) → 2h2o (l) + 2na+ (aq) + so42- (aq)
The net ionic equation for the reaction between aqueous sulfuric acid and aqueous sodium hydroxide is h+ (aq) + oh- (aq) → h2o (l). Here, the sodium ions are spectator ions and are thus not included in the net ionic equation.
Explanation:The question asks about the net ionic equation for the reaction between aqueous sulfuric acid and aqueous sodium hydroxide. Remember, a net ionic equation includes only those components that undergo a change. Spectator ions are not included. In this case, the correct answer is (d) h+ (aq) + oh- (aq) → h2o (l). This equation represents the essential acid-base reaction that occurs. The sodium ion is a spectator ion in this reaction. Hence, it is not included in the net ionic equation.
Learn more about Net Ionic Equation here:https://brainly.com/question/35304253
#SPJ3
A gas contained in a steel tank has a pressure of 1.5 atm at a temperature of 320 k. what will be the gas pressure when the temperature changes to 450 k? a gas contained in a steel tank has a pressure of 1.5 atm at a temperature of 320 k. what will be the gas pressure when the temperature changes to 450 k? 1.5 atm 0.47 atm 0.94 atm 2.1 atm 1.1 atm
Using Gay-Lussac's Law, we calculate that when the temperature of a gas increases from 320 K to 450 K, the pressure of the gas will increase from 1.5 atm to 2.1 atm, assuming the volume and the amount of gas remain constant.
Explanation:To answer the question, we need to use the concept in physics called Gay-Lussac's Law. This law states that the pressure of a given amount of gas held at a constant volume is directly proportional to the Kelvin temperature. It's also important to remember that when we're dealing with gases, temperatures have to be in Kelvin for our calculations to work.
Given that, we know that the initial pressure (P1) is 1.5 atm, the initial temperature (T1) is 320K, and the final temperature (T2) is 450K. We want to find the final pressure (P2). According to Gay-Lussac's law, this can be calculated using the following equation: P1/T1 = P2/T2.
Thus, P2 = P1 * T2 / T1 = 1.5 atm * 450K / 320K = 2.1 atm.
So, the gas pressure will be 2.1 atm when the temperature increases from 320 K to 450 K, assuming that the volume and the amount of gas remain constant.
Learn more about Gay-Lussac's Law here:https://brainly.com/question/2683502
#SPJ3
In this reaction, what roll does the lead (II) nitrate play when 50.0 mL of 0.100M iron (III) chloride are mixed with 50.0 mL of 0.100M lead (II) nitrate?
Answer: iron (III) chloride is the excess reactant in the reaction.
Explanation:
i just did the assignment
True or false there are no ions present in a solution of a weak electrolyte
The correct answer is false.
Hope this helps! ;)
what is the molarity of a 650. mL solution containing 63 grams of NaCl?
Answer:
Molarity = 1.66 mol.L⁻¹
Explanation:
A beaker contains 0.50 mol of potassium bromide in 600 ml of water. an additional 600 ml of water is added. the number of moles of potassium bromide in the beaker is
To find the number of moles of potassium bromide in the beaker after adding additional water, calculate the new concentration and multiply it by the new volume.
Explanation:To find the number of moles of potassium bromide in the beaker, we can use the formula:
Moles = Concentration x Volume
Initially, the beaker contains 0.50 mol of potassium bromide in 600 ml of water. When an additional 600 ml of water is added, the total volume becomes 1200 ml. To find the new concentration, we divide the number of moles (0.50 mol) by the new volume (1200 ml):
Concentration = Moles / Volume = 0.50 mol / 1200 ml = 0.00042 mol/ml
The new number of moles of potassium bromide in the beaker is:
New Moles = Concentration x Volume = 0.00042 mol/ml x 1200 ml = 0.50 mol
Consider the unbalanced equation for the oxidation of aluminum. _Al + _O2 mc031-1.jpg _Al2O3 Which sequence of coefficients should be placed in the blanks to balance this equation?
Answer:
the options are
2, 3, 1
1, 3, 2
4, 3, 2
3, 2, 3
when balancing equation the masses should be balanced. In other words the same number of atoms of the same element should be on either side of the equation
the balanced equation for the oxidation of aluminium is as follows
4Al + 3O₂ ---> 2Al₂O₃
coefficients are the numbers in front of the respective compounds.
the coefficients in the correct sequence are 4,3 and 2
answer is 4, 3, 2