It should be noted that the purpose of hazard lights is to D. show other drivers where your vehicle is.
What are hazard warning lights?The Hazard warning lights can be regarded as a pair of intermittent flashing indicator lights which function to notify the other driver about temporary obstruction.
They are been put in place to show other drivers where your vehicle is.
Learn more about hazard lights at:
https://brainly.com/question/24623157
If you find yourself boxed in by a vehicle on your left or right _____________
clear the space beside you.
A. speed up or slow down briefly
B. cut your speed in half
C. gently steer left and right
D. honk as loud as possible
Answer: A. speed up or slow down briefly
Explanation:
put that and then i saw someone said b and it was wrong and i got mad because it was the only answer i got wrong. but it’s a
Always do the right thing. If you find yourself boxed in by a vehicle on your left or right, speed up or slow down briefly so as to clear the space beside you.
What is the distance between two vehicle?When you are said to be following another vehicle, one must make sure that there is enough space to stop safely so that other vehicle can brake suddenly.
A safe following distance is required for about two seconds behind the vehicle in front of a person.
Learn more about vehicle from
https://brainly.com/question/24460932
Attempts Remaining
How could an online attacker use your online profile to gather information about you to steal your identity?
Answer:
They could find your name, date of birth, place of residence, and anything else you put on your profile.
Explanation:
I hope this helps, not quite sure if that's what you meant. :)
Answer:
malware is one way
Explanation:
because its a malicious software that is written with the intent of compromising a system and stealing the data available on the system.
In general, the farther you are from other road users, the A. lower your crash risk B.higher your crash risk C. slower they are probably moving D. faster they are probably moving
Answer:
lower your crash risk
Explanation:
In general, the farther you are from other road users, the A. lower your crash risk.
What increases your risk of a crash?The Science of Speeding
For every 10 mph of increased speed, the risk of dying in a crash doubles. In practical terms, increasing driving speed from 60 mph to 80 mph increases the risk of a fatal crash by 4 times.
What is the best way to reduce the risk of a crash?Top Ten Tips To Avoid An Accident
Develop the right attitude about drivingGet as much supervised practice driving as possible.ALWAYS wear your safety belt.Underage drinking and drug use is illegalLimit your passengers. Limit your night drivingTo learn more about crash risk of driving, refer
https://brainly.com/question/1618192
#SPJ2
duolcgnitupmoc unscramble the word
Final answer:
The unscrambled term from 'duolcgnitupmoc' is 'cloud computing', which is a technology enabling shared access to computing resources over the internet.
Explanation:
The unscrambled word from 'duolcgnitupmoc' is cloud computing. To achieve this, we can follow a set of instructions similar to that provided in the question, which involve writing the clue, manipulating the letters, and scrambling them until the correct term is derived.
The term represents a technology that allows us to access shared computing resources over the internet, providing flexibility and resources on demand. It refers to the delivery of computing services—including servers, storage, databases, networking, software, and more—over the internet ("the cloud") to offer faster innovation, flexible resources, and economies of scale.
Rule number one for handling an emergency is to ___.
A. buy a new vehicle
B. call law enforcement
C. remain calm
D. restart the vehicle
Rule number one for handling an emergency is to remain calm. Therefore, option C is correct.
What is the first thing you should do in an emergency situation?Choose between sheltering in place and evacuating if necessary. Once you've safely escaped or taken shelter, dial 911 and give a thorough description of the event. Give any injured folks first aid. Any injured individuals should be moved out of further risk.
The first and most important guideline for handling situations is to help oneself. Prior to helping others, take care of yourself. Moreover, confirm that it is safe to go and assist others.
The three essential emergency action procedures — Check-Call-Care — should always be followed in order to take the proper response in any situation. Verify the victim and the situation. To activate the local EMS system, dial the emergency number. Get the consent of a conscious victim before administering care.
Thus, option C is correct.
To learn more about an emergency, follow the link:
https://brainly.com/question/13004123
#SPJ7
How is an interpreter different from a compiler?
a: An interpreter translates and executes code line by line, while a compiler translates all code at once so that it is ready to be executed at any time.
b: An interpreter translates all code at once so that it is ready to be executed at any time, while a compiler translates and executes code line by line.
c: An interpreter translates programming code into binary language, while a compiler does not.
d: An interpreter translates binary language into programming language, while a compiler translates programming language into binary language.
Answer:
Option A is correct answer, which is, an interpreter translates and executes code line by line, while a compiler translates all code at once so that it is ready to be executed at any time.
Further Explanation
• Both, compiler and interpreter used to run program with few differences like interpreter executes line by line while compiler runs program at once.
• If there is no error in the program then compiler will convert source code into machine code which runs faster as compared to interpreters.
• Interpreters executes code run line by line if error occurs, it must be rectified before proceeding to next line while compilers runs whole code.
Answer details
Grade: Middle
Subject: Computers and Technology
Keywords: compiler, interpreter, code execution etc
Answer:
An interpreter translates and executes code line by line, while a compiler translates all code at once so that it is ready to be executed at any time.
Explanation:
Some other differences between the both are:
* An interpreter always translates the program one statement at a time while compiler scans the entire programs and converts it into machine code as a whole.
*Interpreters are efficient because no intermediate object is created while compilers generate intermediate object code which further requires linking.
*Interpreters do not save the machine code while compilers store the machine code on the disk.
Tags: difference between interpreter and compiler
Florida Highway Safety and Motor Vehicles reported blank of traffic fatalities were alcohol-related in Florida in 2009.
Answer:
8.5% is what i saw on a pdf i found online
Explanation:
https://flhsmv.gov/pdf/crashreports/crash_facts_2009.pdf
At the end of a presentation it is important to:
Summarize your main points
Display many visual aids
Discuss all your failures
Discuss all your successes
When a vehicle strikes a pedestrian, it's most often during A. a period of darkness or low visibility B. the day when pedestrians are walking C. rush hour when roads are busy D. the morning when drivers aren't alert
Answer:
A. a period of darkness or low visibility
Explanation:
When a vehicle strikes a pedestrian, it's most often during a period of darkness or low visibility.
Answer:
A. a period of darkness or low visibility
Explanation:
When a pedestrian is hit by a vehicle, very oftenit's during a period of low visibility or not enough light.
unscramble the word duolcgnitupmoc
Answer:
Answer:
The word is computing cloud, since the topic is from computers and technology, and the whole word is backwards.
Gravity adds to your__ when driving downhill.
A. momentum
B. braking power
C. weight
D. gas consumption
Answer:
A. momentum
Explanation:
"Momentum" by definition is found by the mass of the object x the velocity of the object. It also defines the speed you are going in, and how much faster or slower you are going.
For example, you need to find the momentum of a car, who's mass is 100 kg, and the velocity is 20 mph.
Momentum = 100 x 20
Momentum = 2000
~
Friction is the
A. amount of air in your tires
B. energy that helps your car stay in motion
C. cost of gas prices
D. resistance of movement between two surfaces in contact
what is a point-in-time measurement of system performance?
Answer:
Point-in-time analysis is essentially the measurement of manager performance from an arbitrarily selected endpoint (usually the most recent month, quarter or year-end) over trailing periods of time.
Explanation:
The point-in-time analysis is the measurement of manager performance from an arbitrarily selected endpoint over periods of time.
What is system performance?System performance is the amount of useful work that is done by a system measured by the production speed of the products of a predefined quality.
Hence, point-in-time measurement of system performance is the measurement of manager performance from an arbitrarily selected endpoint over periods of time.
Learn more about system on:
https://brainly.com/question/847634
#SPJ9
Effective character encoding requires:
a: standardized code.
b: compatible browsers.
c: common languages.
d: identical operating systems.
Answer:
Standardized code
Effective character encoding requires standardized code.
What is standarized code?Getting an application that needs to be altered and having to spend hours trying to understand it. Unfortunately, far too many coders encounter this situation during their careers.
The most useless thing you can do is to pore over pages and pages of code without understanding its aims or purpose.
However, compared to the alternative ordeal, reading unfamiliar code that is clearly organized and includes neat comments describing the intricate constructs and their justification would be a piece of cake.
Therefore, Effective character encoding requires standardized code.
To learn more about code, refer to the link:
https://brainly.com/question/31228987
#SPJ3
If you see rough patches,
loose gravel, or potholes
on the road, you should
A. steer around them
B. shift to Neutral
C. slow down
D. speed up
Answer:C
Explanation:
The only option that serves as the correct precaution when you encounter a pothole, rough patch or loose gravel while driving is;
Option C; Slow Down
When driving, we usually drive at best possible speed according to the nature of the road as well as the volume of cars plying that road as well.Now, at different times, we may have apply brakes to slow down the vehicle or even change gear if it is a manual car to change the maximum speed.Now, when we encounter obstacles such as potholes, loose gravel or rough patches, it is advisable to slow down because we never can tell the severity of the pothole or loose gravel or rough patch. This is because if we speed up and the pothole is severe, the vehicle stands a great chance of tumbling since the potholes or patches would literally be barriers that acts against the force generated by the high speed of the car.It can't also be to shift to neutral because usually when a gear is changed to neutral, it means that it is sitting in between the 2 gears between which it is positioned and it doesn't necessarily mean slowing down.
Thus, the correct answer is to Slow down
Read more at; https://brainly.in/question/8920257
why is it important for you to understand and describe the internal and external components of a computer in the workplace
Hi! I have been troubleshooting and building PCs all my life and I find it very important to know the the internal core components of a PC and how they function that way when errors occur you can attempt to fix the problem.
Ex1: Lets say your BIOS identifies a problem with a RAM slot you would be able to know that your RAM slot is either shorted or there is a problem with the RAM stick you inserted.
Ex2: Now your monitor is flashing and turning colors randomly. You could make an inference that either your monitor is prongs are broken, your cable prongs could be bent, your cable might not be plugged in all the way, or your external or integrated GPU is toast.
Hope this might've showed you something
Aaron
A defensive driver's priority is __
A. efficiency
B. speed
C. handling
D. safety
Answer:
D. safety
Explanation:
A defensive driver's priority is safety.
A defensive driver's priority is always safety.
4. When should you manage the space ahead of, behind, and beside your
vehicle?
A. When you're driving fast
B. When it's dark out
C. Rush hour
D. Always
Answer:D
Explanation:
You always need to manage the space near your vehicle, Option D is the correct answer .
Why the space near a vehicle needs to be managed ?The space ahead of, behind, and beside a vehicle needs to be managed for safety , as keeping a safe distance form other vehicle or objects will keep the people nearby safe and even the vehicle will be damage proof.
Therefore among the options given , you always need to manage the space near your vehicle.
To know more about Space near Vehicle
https://brainly.com/question/1937028
#SPJ2
A DSLR camera is made up of two parts. They are
Answer:
the lens and the camera
Explanation:
Answer:
lens and camera or mirrior and lens
Explanation:
DSLR stands for Digital single lens reflex. Its also a little misleading. Is this just reffering to the body of the camera?
mail merge documents use ______ to represent personal information that stored in a table.
Mail merge documents use Mandatory to represent personal information that stored in a table.
Mail merge lets you create a batch of documents that are personalized for each recipient. For example, a form letter might be personalized to address each recipient by name. A data source, like a list, spreadsheet, or database, is associated with the document.
What are the three main documents of mail merge process?There are three documents that are involved in the mail merge process: the main document, the data source, and the merged document.
What is mail merge and its types?Mail Merge is a handy feature that incorporates data from both Microsoft Word and Microsoft Excel and allows you to create multiple documents at once, such as letters, saving you the time and effort of retyping the same letter over and over.
To learn more about Mail merge documents, refer
https://brainly.com/question/25843399
#SPJ2
2. Name the main technology used to connect computers to devices
A. USB
B. Firewire
C. Wifi
D. Ethernet
Answer: USB
Explanation:
A USB provides a direct connection from a computer to a device.
If Gengar becomes 75145118, what does Gastly become?
Answer:
7119201225
Explanation:
According to the question, Gengar becomes 75145118, means it is consdering A as 1, B as 2, C as 3 ............and Z as 26, and when a character repaets it does minus 2 like in the question G=7, E=5,N=14,again G which should be 7 but as its a repeated character we are doing -2 here i.e 5, and next character is A=1, R=18,
Similarly Gastly will be 7119201225
In the beginning of a presentation, it is important to:
Take questions
Introduce yourself and your objective
Summarize your main points
Display many visual aids
I think it is better to ask questions and troduce yourself
which cell has no nucleus ?
You may encounter in
rural areas at a higher rate
than urban areas.
A. drunk pedestrians
B. wildlife or livestock
C. commercial vehicles
D. medical transport
Answer:
The correct answer is B. wildlife or livestock.
It's important to
routine short trips.
A. prepare for
B. memorize
C. save time on
D. find a shortcut for
Answer:
A. prepare for
Explanation:
It's important to prepare for routine short trips.
Answer:prepare
Explanation:
i got it right on flvs
Difference between positional and non positional number
Answer:
In positional number system,
1. each symbol represents different value depending on the position they occupy in a number.
2. In positional number system, each system has a value that relates to the number directly next to it. The total value of a positional number is the total of the resultant value of all positions.
3. Example: 12 can be 1 x 10 + 2 x 1, 10 + 2= 12
whereas in Non-Positional number
1. In non-positional number system, each symbol represents the same value regardless of its position
2. In non-positional number system each symbol represents a number with its own place value.
3. Example: Roman number system where I for 1, II for 2 etc.
hope this helps~✨
All of the following except one are issues that should be covered in an AUP. Which one is the exception?
A) A coworker asks to log into the network using your user name and password because his or her account is "unavailable."
B) You receive a caricature drawing of your boss via e-mail that you think is hilarious and are considering forwarding it to your office mates.
C) The person sitting next to you spends all of his or her time at work downloading financial quotes and trading stocks online.
D) Your computer monitor will not switch on.
Answer:
D) Your computer monitor will not switch on.
Explanation:
A written agreement or a document stipulating constraints and practices that a community computer network or an individual user must agree and adhere to is called an Acceptable Use Policy (AUP). Employees and students are required to sign an AUP when you sign up with an ISP. A good AUP will cover most provisions for network etiquette and indicate clearly the privacy levels of a member. The examples given in the multiple choices above are use cases for AUP apart from option D. If a user is not certain on the actions that should be taken in use cases like these, an AUP should be of great help.
What is a Trojan?(I'm talking about the computer virus)
Answer:
A trojan virus is a program that looks normal, but secretly has code that destroys your computer from the inside out. It also can be something that resides in your computer, and it doesn't activate until you open the program, folder, or application.
You can prevent Trojan horses by using anti-malware, and it really helps to prevent any viruses from getting into your computer/device.
the product of two integers is -180 if one of them is 12 find the other
The answer is -15. This because 12 * 15 = 180 so in order to make it negative one of the integers has to be negative and since 12 is given you have to make 15 negative.