This is a systematic method of naming chemical compounds. This creates an unambiguous and consistent name for any chemical compound throughout the world.

The answer to your question

B

I hope the answer to your question

Answer:

D. Temperature

Explanation:

This is the correct answer on edge.

The pressure of the gas increases when its volume is reduced from 4 L to 0.5 L at constant temperature, according to Boyle's Law, which dictates an inverse relationship between volume and pressure for a given amount of gas.

When the volume of a gas is reduced from 4 L to 0.5 L while the temperature is held constant, according to Boyle's Law, the pressure of the gas increases. Boyle's Law states that at constant temperature, the volume of a fixed number of moles of a gas is inversely proportional to the pressure applied to it. This means that if you decrease the volume of the gas, the pressure must increase to compensate, assuming the amount of gas does not change.

Therefore, in this case where the volume decreases by a factor of 8 (from 4 L to 0.5 L), the pressure must increase by the same factor, assuming that no gas escapes and the temperature remains constant. It's important to note that these principles assume ideal gas behavior and may not perfectly model real gases under all conditions.

Answer:

A: They evaporate

Explanation:

Where do the OH- ions go as additional acid is added? They evaporate. They combine with excess H+ ions to form more water. They remain in the solution at the same concentration.

The pH of the mixture solution is 0.745

The concentration of [tex]HNO_3[/tex] = 0.18 m

The concentration of [tex]HBrO[/tex] = 0.24 m

It is required to calculate the pH of the mixture solution.

pH, a quantitative measure of the acidity or basicity of aqueous or other liquid solutions.

We know that [tex]HNO_3[/tex] is a strong acid while HBrO is weak acid.

Therefore we ignore the presence of the weak acid such that we consider the pH of the strong acid.

since

pH= - log (H⁺)

Hence pH= -log (0.18)

             pH  = 0.745

Therefore, the pH of the mixture solution is 0.745

To learn more about pH, Click here:

https://brainly.com/question/491373

Photosynthesis is a chemical process used by plants where solar energy is used to transform carbon dioxide and water into carbohydrates and oxygen.

It is the biochemical process by which plants convert inorganic matter (carbon dioxide and water) into organic matter (sugars), taking advantage of energy from sunlight.

This process constitutes one of the most important biochemical mechanisms on the planet since it involves the manufacture of organic nutrients that store light energy from the Sun.

Therefore, we can conclude that photosynthesis is the process carried out by plants to transform inorganic matter (Carbon dioxide, water and solar energy) into organic substances.

Learn more about photosynthesis here: https://brainly.com/question/2903735

The answer is C. Subduction

Answer:

The element will be represented as : [tex]Ba_{56}^{130}[/tex]

Explanation:

The identity of an element (isotope) is with its atomic number.

The atomic number is the number of protons in the element.

Irrespective of the number of electrons / neutrons the atomic number will be equal to the number of protons only.

atomic number of the isotope is 56.

The element with 56 atomic number is Barium

The mass number of Barium = protons + neutrons = 56 + 74 = 130

The element will be represented as : [tex]Ba_{56}^{130}[/tex]

The answer is false.

Within the extracellular fluid (ECF), the major cation is sodium (Na⁺) while the major cation in the intracellular fluid is potassium (K⁺). Sodium-potassium pump, is a solute pump that pumps three sodium ions out of the cell in exchange for two potassium ions pumped in the cell, both against their concentration gradients.These electrolytes play an important role in maintaining homeostasis. The ECF, in particular the interstitial fluid, is surrounding all of the cells in the body and therefore is crucial for their normal functions. The ECF is maintained by a number of homeostatic mechanisms including regulation of sodium concentration.

Answer:

Electrons in the outermost shell are called valence electrons, because it is their interactions that determine the chemical properties of an element. The columns that were set up to group elements by similar chemical properties turn out to be the exact same columns defined by the number of valence electrons.

The valence electron of an element determines the group of the element and elements in the same group have similar chemical properties.

The valence electron of an element indicates its the group of the element in the periodic table. Elements found within the same group in the periodic table have similar chemical properties.

For example:

Thus, we can conclude that valence electron of an element determines the group of the element and elements in the same group have similar chemical properties.

Learn more here:https://brainly.com/question/9678979

The helium flash, a nearly explosive ignition in a red giant star's core, converts helium into carbon through the triple-alpha process. This marks a crucial step in stellar evolution involving the production of heavier elements. Recognized by two protons in its nucleus, helium exists as the second most abundant element in the universe.

The helium flash refers to a nearly explosive ignition of helium as a part of the triple-alpha process in the dense core of a red giant star. During the helium flash, helium (a lighter element) is converted into a heavier element, specifically, carbon. Managed through a sequence called the triple-alpha process, three helium-4 nuclei combine to form a carbon-12 nucleus.

The process of forming helium from hydrogen involves addition of another proton to create the helium nucleus, emitting significant energy. As a part of stellar evolution, the complete exhaustion of helium in the core leads to the production of heavier elements like oxygen, neon, and magnesium, by the fusion of carbon.

For context, helium is the second-most abundant element in the universe, discovered in 1868, and is defined by its two protons within the nucleus. This element is most commonly known as the light gas used to inflate balloons.

https://brainly.com/question/10195637

#SPJ12

The partial pressure of O₂ is 0.693 atm, the partial pressure of He is 5.55 atm, and the total pressure in the vessel is 6.24 atm.

The partial pressure of each gas and the total pressure in the vessel, we can use the ideal gas law, PV = nRT. We'll start by calculating the number of moles of each gas.

Now use the ideal gas law to find the partial pressures. The universal gas constant (R) is 0.0821 L·atm/(mol·K) and the temperature (T) is 65 °C, which is 338 K.

Total Pressure = P(O₂) + P(He) = 0.693 atm + 5.55 atm = 6.24 atm

Final answer:

The standard enthalpy change (ΔH°) for the reaction of ammonia with O2 to yield nitric oxide and H2O(g) is calculated using standard enthalpies of formation and is found to be -633.2 kJ.

Explanation:

To calculate the standard enthalpy change (ΔH°) for the reaction of ammonia (NH3) with O2 to yield nitric oxide (NO) and H2O(g), we can use the standard enthalpies of formation (ΔH°f) for the reactants and products. Unfortunately, the provided information contains several elements that are not relevant to this question. Let us use the correct ΔH°f values to find the ΔH° for this reaction. Assuming we have balanced the equation and it is:

4NH3(g) + 5O2(g) → 4NO(g) + 6H2O(g)

The formula to calculate ΔH° is:

ΔH° = [∑ (ΔH°f products) × (moles of product)] - [∑ (ΔH°f reactants) × (moles of reactant)]

Using the values given for ΔH°f:

ΔH°f NH3 = -46.1 kJ/mol
ΔH°f NO = 91.3 kJ/mol
ΔH°f H2O(g) = -241.8 kJ/mol

For the reaction:

ΔH° = [4×91.3 kJ/mol + 6×(-241.8 kJ/mol)] - [4×(-46.1 kJ/mol) + 5×0 kJ/mol]

ΔH° = (365.2 kJ - (-1448.8 kJ)) - (-184.4 kJ + 0 kJ)

ΔH° = -817.6 kJ + 184.4 kJ

ΔH° = -633.2 kJ

Therefore, the standard enthalpy change for the reaction is -633.2 kJ.

In an exothermic reaction, the energy of the reactants is higher than that of the products, signifying that energy is released. The activation energy is the difference between the energy of the reactants and the activated complex, and the enthalpy of reaction is the heat content change indicating if the reaction is exothermic or endothermic.

To determine whether a reaction is exothermic or endothermic, we can analyze the enthalpy change (ΔH). If ΔH is less than zero (ΔH < 0), this indicates that the reaction is exothermic. In an exothermic reaction, the energy of the reactants is higher than that of the products, and energy is released in the form of heat or light.

To calculate the activation energy (A), which is the minimum energy required to start a reaction, we consider the energy difference between the reactants (E) and the activated complex (B), also known as the transition state.

The enthalpy of reaction (C) represents the heat content change from reactants to products. In cases where the products (G) have lower energy than the reactants (F), the reaction is indeed exothermic. Therefore, in your answer, you should include ideas that reflect the concepts of activation energy, activated complex, enthalpy of reaction, energy of the reactants, and energy of the products to explain why the reaction is exothermic.

The final balanced equation is 3Cu(s) + 2HNO₃(aq) + 6H⁺(aq) → 3Cu²⁺(aq) + 2NO(g) + 4H₂O(l).

To balance the redox reaction of copper with nitric acid in acidic conditions, we need to write separate half-reactions for oxidation and reduction, balance them for mass and charge, and then combine them into a balanced overall equation. The oxidation half-reaction involves copper turning into copper(II) ions:

oxidation:
Cu(s) → Cu²⁺ (aq) + 2e⁻

For the reduction half-reaction, nitric acid is reduced to nitrogen monoxide:

reduction:
HNO₃(aq) + 3e⁻ → NO(g) + H₂O(l)

Now we multiply each half-reaction by a number that will balance the electrons lost in oxidation with the electrons gained in reduction. For this equation, we multiply the oxidation half-reaction by 3 and the reduction half-reaction by 2:

3Cu(s) - 3Cu²⁺ (aq) + 6e⁻
2HNO₃(aq) + 6e⁻ - 2NO(g) + 2H₂O(l)

Now we combine the half-reactions and add 6H⁺ to balance the hydrogen:

3Cu(s) + 2HNO₃(aq) + 6H⁺ (aq)
ightarrow 3Cu²⁺ (aq) + 2NO(g) + 4H₂O(l)

This equation represents the balanced redox reaction in acidic solution between solid copper and nitric acid to produce aqueous copper(II) ions and nitrogen monoxide gas.

The complete question is:

Balance the following equation in acidic conditions. Phases are optional.

Cu+NO3- = Cu2+ NO

(redox and Oxidation reactions)

The reaction of 0.20 moles of oxygen on complete utilization produces 0.40 moles of MgO.

From the reaction,

1 mole of oxygen produced 2 moles of MgO.

So, 0.20 moles of oxygen produces:

Moles of MgO produced = 0.20 [tex]\times[/tex] 2

Moles of MgO produced = 0.40 moles.

The reaction of 0.20 moles of oxygen on complete utilization produces 0.40 moles of MgO.

For more information, refer the link:

https://brainly.com/question/4066080?referrer=searchResults

Answer is: nitrogen(N₂), oxygen(O₂), hydrogen(H₂), carbon monoxide(CO), calcium oxide(CaO), hydrogen chloride(HCl), sodium hydride(NaH).

Diatomic molecules are molecules made of two atoms.

They can be homonuclear (molecule made of two atoms of the same element) and heteronuclear (molecule made of two different atoms).

Answer:

1. Largest planet in the solar system.

2. Has no moons.

3. True

4. Most of them lie in a belt between Earth and Mars.

5. Earth

6. The orbital period of planet A is shorter than that of Planet B.

Explanation:

1. Saturn is the second largest planet of the solar system. It is a gaseous planet which is known as the Ringed planet because of the beautiful ring system which are visible from Earth through telescope. It has several moons - more than 60 moons.

2. Mars is known as red planet. It is the fourth planet from the sun. It is one of the rocky planets having very thin atmosphere. It has two moons - Phobos and Deimos.

3. From Kepler's first law of planetary motion we know that planets move around Sun in an elliptical orbit with sun at its foci. Thus, the given statement is true.

4. Asteroids are irregular shaped and sized rocky objects orbiting sun . These are thought to be remains of  a never formed planet between Mars and Jupiter. Thus, majority of the asteroids are found between the orbits of these two planets.

5. There are four terrestrial planets ( Mercury, Venus, Earth and Mars). The terrestrial planets have the following layers- the core, the mantle and the crust. Out of these four planets- the Earth has the smallest inner core.

6.  From Kepler's laws about planetary motion, we know that the planet closer to the Star moves with greater orbital speed and thus has shorter orbital period than the rest. Here, planet A is closer to the star than planet B. Thus, planet A would have shorter orbital period than planet B.

This detailed answer provides accurate explanations for each question, covering topics related to the description of Saturn, Mars, elliptical orbits, asteroids, planet cores, and orbital motion.

1- The statement 'Largest planet in the solar system' is not a description of Saturn. Saturn is actually the second-largest planet in our solar system, with Jupiter being the largest.

2- The statement 'Has no moons' is not a description of Mars. Mars actually has two moons, named Phobos and Deimos.

3- The statement is true. Planets do move around the sun in elliptical orbits. An elliptical orbit is a slightly elongated circle, and this is the shape followed by the planets in our solar system.

4- The statement 'They are thought to be remains that never formed a planet' is not a description of asteroids. Asteroids are actually rocky fragments that orbit the sun but are too small to be considered planets. Some asteroids may be remnants from the early formation of the solar system, but not all of them.

5- According to the chart, Venus has the smallest inner core. The chart shows that Venus has the smallest inner core compared to Mars, Jupiter, and Earth.

6- The description that explains the expected motion of Planets A and B is that the orbital period of Planet B is shorter than that of Planet A. When a planet is closer to the star, its orbital period is shorter, which means it completes its orbit more quickly than a planet that is farther away.

https://brainly.com/question/32109915

#SPJ6

Answer:

Cosmic background radiation is leftover thermal energy from the big bang.

Explanation:

Answer:

Option (I) has the lowest energy rate so that would be best option.

Explanation:

(I). Given that,

Input energy = 1900 W

Output energy = 1786 W

We calculate the loss of energy

Using formula of loss of energy

[tex]E_{loss}= E_{in} - E_{out}[/tex]

Put the value into the formula

[tex]E_{loss}=1900-1786= 114\ W[/tex]

(II). Given that,

Input energy = 1450 W

Output energy = 1300 W

We calculate the loss of energy

[tex]E_{loss}=1450-1300= 150\ W[/tex]

(III). Given that,

Input energy = 1950 W

Output energy = 1833 W

We calculate the loss of energy

[tex]E_{loss}=1950-1833= 117\ W[/tex]

(IV). Given that,

Input energy = 2000 W

Output energy = 1822 W

We calculate the loss of energy

[tex]E_{loss}=2000-1822= 178\ W[/tex]

Hence, Option (I) has the lowest energy rate so that would be best option.

The oxidation number of Cu in CuSO₄ is +2 and 0 in Cu, the free elemental form. As the oxidation of Cu decreases from +2 to 0, we are looking at the reduction half-reaction for the given redox reaction:

Cu²⁺ + 2e⁻ → Cu

The correct answer is option B.