Transfer RNA __________. A is translated into protein B tags a growing polypeptide for export to the endoplasmic reticulum C is produced in the nucleolus D has catalytic activity and is thus a ribozyme E binds to its specific amino acid in the active site of an aminoacyl-tRNA synthetase

Answer:

(a) ΔU = 7.2x10²

(b) W = -5.1x10²

(c) q = 5.2x10²

Explanation:

From the definition of power (p), we have:

[tex] p = \frac {\Delta W}{\Delta t} = \frac {\Delta U}{\Delta t} [/tex] (1)

where, p: is power (J/s = W (watt)) W: is work = ΔU (J) and t: is time (s)  

(a) We can calculate the energy (ΔU) using equation (1):

[tex] \Delta U = p \cdot \Delta t = 100 \frac{J}{s} \cdot 2.0\cdot 10^{-2} h \cdot \frac{3600s}{1h} = 7.2 \cdot 10^{2} J [/tex]  

(b) The work is related to pressure and volume by:

[tex] \Delta W = -p \Delta V [/tex]

where p: pressure and ΔV: change in volume = V final - V initial      

[tex] \Delta W = - p \cdot (V_{fin} - V_{ini}) = - 1.0 atm (5.88L - 0.85L) = - 5.03 L \cdot atm \cdot \frac{101.33J}{1 L\cdot atm} = -5.1 \cdot 10^{2} J [/tex]

(c) By the definition of Energy, we can calculate q:

[tex] \Delta U = \Delta W + \Delta q [/tex]

where Δq: is the heat transfer

[tex] \Delta q = \Delta U - \Delta W = 7.2 J - (-5.1 \cdot 10^{2} J) = 5.2 \cdot 10^{2} J [/tex]    

I hope it helps you!  

Answer:

Internal energy

Explanation:

Particles have two main energies that scientists acknowledge.

When these two types of energies are considered collectively, we call that internal energy

Answer:

68325.8 g/mol

Explanation:

Given that:

Pressure = 743 torr

Temperature = 37 °C

The conversion of T( °C) to T(K) is shown below:

T(K) = T( °C) + 273.15  

So,  

T = (37 + 273.15) K = 310.15 K  

T = 310.15 K  

Volume = 2.30 mL = 0.00230 L ( 1 mL = 0.001 L)

Using ideal gas equation as:

PV=nRT

where,  

P is the pressure

V is the volume

n is the number of moles

T is the temperature  

R is Gas constant having value = 62.364 L.torr/K.mol

Applying the equation as:

743 torr × 0.00230 L = n × 62.364 L.torr/K.mol  × 310.15 K  

⇒n = 8.84 × 10⁻⁵ moles

Since, given that:-

4 moles of oxygen gas is transferred by 1 mole of haemoglobin.

8.84 × 10⁻⁵ moles  of oxygen gas is transferred by 8.84 × 10⁻⁵/4 moles of haemoglobin.

Moles of haemoglobin = 2.21 × 10⁻⁵ moles

Mass = 1.51 g

The formula for the calculation of moles is shown below:

[tex]moles = \frac{Mass\ taken}{Molar\ mass}[/tex]

Thus,

[tex]2.21\times 10^{-5}\ mol= \frac{1.51\ g}{Molar\ mass}[/tex]

[tex]Molar\ mass= 68325.8\ g/mol[/tex]

The question is asking for the molar mass of hemoglobin, which can be calculated using the Ideal Gas Law and the information provided. Hemoglobin, a protein in red blood cells, combines with four oxygen molecules, the fact that is fundamental to this calculation.

The molar mass of hemoglobin can be calculated using the Ideal Gas Law (PV=nRT). In this case, the volume of O2 (V) is 2.30 mL or 0.0023 L, the pressure (P) is 743 torr (or approximately 0.977 atm), the gas constant (R) is 0.0821 L⋅atm/mol⋅K, and the temperature (T) is 37 °C or 310 K. We can solve this equation to find the amount of moles of O2 (n). As each molecule of hemoglobin combines with four molecules of O2, we can then find out the amount of moles of hemoglobin, and knowing its mass (1.51 g), finally calculate its molar mass (grams per mole).

To confirm the correctness of this procedure, remember that hemoglobin is a protein found in red blood cells which combines with what? Oxygen molecules - four of them, in fact! This is crucial for the transport of oxygen throughout the body, and it also directly pertains to and informs our calculation of hemoglobin's molar mass.

https://brainly.com/question/26753505

#SPJ11

With every addition of NaOH, the concentration of HC2H3O2 in the solution decreases due to the neutralization reaction. Thus, the quantity of HC2H3O2 after adding 5.0 mL of NaOH will be less than the amount after adding 1.0 mL of NaOH. This is due to the stoichiometry of the reaction, where one mole of added NaOH neutralizes one mole of acetic acid.

In this titration analysis, the neutralization reaction involves acetic acid (HC2H3O2) and Sodium Hydroxide (NaOH), creating sodium acetate and water as products. When 1.0 mL of NaOH is added, it reacts with the acetic acid present in the flask, reducing its quantity. When 5.0 mL of NaOH is added, more acetic acid reacts, and therefore, the amount of HC2H3O2 in the flask decreases more significantly compared to when only 1 mL was added. The principle of this result is based upon the stoichiometry of the neutralization reaction, indicating that for each mole of NaOH added, one mole of acetic acid is neutralized. Therefore, as more NaOH is added, more HC2H3O2 is neutralized, hence contributing to a lower concentration of HC2H3O2 in the solution.

https://brainly.com/question/31271061

#SPJ12

The amount of HC2H3O2(aq) in the flask will be less after the addition of 5.0mL NaOH than after the addition of 1.0mL NaOH. This happens because the NaOH neutralizes the acid directly proportional to its quantity added. More the NaOH added, more the acidic substance HC2H3O2 gets neutralized.

In a titration process involving HC2H3O2(aq) and NaOH(aq), following the neutralization equation, each acid molecule reacts with one base molecule. Hence, the quantity of HC2H3O2 will reduce in direct proportion to the amount of NaOH added. So if you add 5.0mL of NaOH, you will neutralize 5 times as much HC2H3O2 as when you add 1.0mL of NaOH.

Therefore, the quantity of HC2H3O2(aq) remaining in the flask after the addition of 5.0mL NaOH will be less than that after the addition of 1.0mL NaOH. The reason is that more NaOH means more HC2H3O2(aq) has been neutralized into water and the salt NaC2H3O2.

https://brainly.com/question/31271061

#SPJ11

Answer:

A

Explanation:

The slow step of the reaction is the rate determining step. This means to get the rate law for a chemical activity with slow and fast steps, we have to consider the slow step if we are to write the rate law successfully.

Since the compound NO is reacting with itself, we have to raise the value of the concentration in the square bracket by 2. That is why we have the concentration squared.

Answer: it’s c

Explanation:

Answer:

Final temperature T is 26.197 degrees celcius.

Explanation:

As the system is in thermal equilibrium, the heat lost by aluminium is the heat gained by water.

specific heat capacity of aluminium = 0.9 J/g per degree celcius

specific heat capacity of water = 4.186 J/g per degree celcius

Let the final common temperature attained be "T".

Heat lost by aluminium = [tex](m)(c)(65.6-T)[/tex]

Heat gained by water = [tex](m)(c)(T-22)[/tex]

by law of conservation of energy,

Heat lost by hot body = Heat gained by cold body

[tex](m)(c)(65.6-T)[/tex] = [tex](m)(c)(T-22)[/tex]

[tex](27.5)(0.9)(65.6 - T) = (55.5)(4.186)(T - 22)[/tex]

calculating the value of T comes out as 26.197 degrees celcius.

Answer: D.) A method to determine the sequence of bases in a gene.

Explanation:Polymerase chain reaction (PCR) is a method widely used in molecular biology to make several copies of a specific DNA segment. Using PCR, copies of DNA sequences are exponentially amplified to generate thousands to millions of more copies of that particular DNA segment

Answer:

C

Explanation:

A nuclear reaction is one in which 2 atoms combine or an atom divides to give rise to entirely different atoms. This is basically the difference it has with a chemical reaction. In a chemical reaction, only new compounds are formed but not new elements. In the case of a nuclear reaction however, even if new elements are not formed, a different atom would be formed.

Answer : The value of change in entropy for vaporization of water is [tex]1.09\times 10^2J/mol[/tex]

Explanation :

Formula used :

[tex]\Delta S^o=\frac{\Delta H^o_{vap}}{T_b}[/tex]

where,

[tex]\Delta S^o[/tex] = change in entropy  of vaporization = ?

[tex]\Delta H^o_{vap}[/tex] = change in enthalpy of vaporization = 40.7 kJ/mol

[tex]T_b[/tex] = boiling point temperature of water = [tex]100^oC=273+100=373K[/tex]

Now put all the given values in the above formula, we get:

[tex]\Delta S^o=\frac{\Delta H^o_{vap}}{T_b}[/tex]

[tex]\Delta S^o=\frac{40.7kJ/mol}{373K}[/tex]

[tex]\Delta S^o=1.09\times 10^2J/mol[/tex]

Therefore, the value of change in entropy for vaporization of water is [tex]1.09\times 10^2J/mol[/tex]

The entropy change ∆S° for the vaporization of 1.00 mol of water at its boiling point is calculated to be 109.09 J/K·mol using the given enthalpy of vaporization.

To calculate ∆S° for the vaporization of 1.00 mol water at 100.°C and 1.00 atm pressure when ∆H°vap = 40.7 kJ/mol, we can use the thermodynamic relation ∆G° = ∆H° - T∆S° and the fact that at the boiling point, ∆G° for the phase change is zero. This would mean the ∆S° can be calculated as ∆S° = ∆H°vap/T. Plugging in the known values,

∆S° = 40.7 kJ/mol / 373.15 K

∆S° = 0.10909 kJ/K·mol

Since 1 kJ = 1000 J, we convert this to J:

∆S° = 109.09 J/K·mol

Therefore, the entropy change ∆S° for the vaporization of 1.00 mol of water at its boiling point is 109.09 J/K·mol.

Answer:

P = 3,63 atm

Explanation:

Using PV=nRT and knowing the temperature in the problem remains constant it is possible to rewrite this formula, thus:

PV = kn, where k is RT (Constant), P is pressure, V is volume and n are moles.

The first bulb contains:

4,87L×4,38atm = 21,3k moles

And the second bulb:

4,87L×2,90atm = 14,1k moles

When gases are mixed, the total moles are:

21,3k moles + 14,1k moles = 35,4k moles

As total volume is 4,87L + 4,87L = 9,74L

Replacing:

P = kn/V

P = 35,4k moles / 9,74L

P = 3,63 atm

I hope it helps!

Answer:

True

Explanation:

All the chemical elements have their abbreviations as one or two letters

The first letter in the abbreviation is a capital letter and the second letter is always a small letter

Majority of abbreviations are based on their english names

Final answer:

The statement regarding a chemical symbol being a one- or two-letter abbreviation for a chemical element is true. These symbols are a shorthand for elements, such as 'O' for oxygen or 'Fe' for iron, and are crucial for anyone studying chemistry.

Explanation:

The statement that a chemical symbol is a one- or two-letter abbreviation for a chemical element is true. Chemical symbols provide a concise way to represent elements in scientific writings and discussions. For instance, the symbol 'O' stands for oxygen, while 'Zn' represents zinc. The first letter of a chemical symbol is always capitalized, and if there is a second letter, it is lowercase.

Elements that have been known for a long time often have symbols derived from their Latin names. For example, the symbol for iron is 'Fe', which comes from its Latin name 'ferrum'. It is important for those studying chemistry to become familiar with the chemical symbols of the elements, most of which you can find on the periodic table.

Water, Carbon Dioxide, Acids, and Oxygen are the inorganic chemicals common in cells.

Thus, inorganic chemicals like Water, Carbon Dioxide, Acids, and Oxygen

are essentail for cells.

To know more about inorganic chemicals, refer to the below link:

https://brainly.com/question/13648108

#SPJ2

Answer:

The product of the reaction is 1,2 di-bromo-1-methylcyclopentane.

Explanation:

In the reaction of 1-methylcyclopentene with Br2 in CCl4, a bromonium ion intermediate forms, followed by nucleophilic attack by Cl-, resulting in the product 1-chloromethylcyclopentane.

In the reaction of 1-methylcyclopentene with Br2 in CCl4, a bromonium ion intermediate is formed. The bromonium ion is a three-membered ring with a bromine atom attached to two adjacent carbon atoms. Due to the lack of stereochemistry information, the structure of the intermediate is a general representation without specifying the stereochemical arrangement.

Following the formation of the bromonium ion, it undergoes a nucleophilic attack by the chloride ion (Cl-) from the solvent CCl4. The chloride ion opens the bromonium ring, leading to the substitution of bromine by chloride on one of the adjacent carbons. The product of this reaction is 1-chloromethylcyclopentane. The chlorine atom is now attached to the carbon that originally carried the methyl group.

This reaction mechanism is a classic example of halogenation of alkenes, where the bromine adds to the alkene in a concerted manner, forming a cyclic intermediate. The subsequent nucleophilic attack by the chloride ion results in the replacement of bromine with chlorine, leading to the final halogenated product.

For more such information on: reaction

https://brainly.com/question/25769000

#SPJ6

Answer:

See explanation below

Explanation:

3. Each atom has unique electron energy level when compared to other, when electron relaxes from an excited energy level, it emits energy in the form of electromagnetic waves with energy equals to the difference between energy of ground and excited state. As electromagnetic wave wavelength obeys planck relation

[tex]c = \lambda f[/tex]

And the energy of each photon in electromangetic wave of specific frequency is

[tex]E=hf[/tex]

Where h is planck's constant

We can see that the wavelength, which determines color and position of bright line in spectroscope corresponds directly to the energy of electromagnetic wave, and thus, the characteristic energy of atom.

4. From the answer above, you now know that electronic transition can emit electron with specific wavelength. In strontium, emission of colored light occurs by the relaxation of electrons in excited state such that the difference between excited energy level and ground level falls in the energy of visible light spectral range.

5. In Na, ground state configuration is 2-8-1. 2-7-1-1 indicates that one of electron in ground state got excited by external energy to excited state, and thus, indicates that Na atom is in excited state

Final answer:

Bright-line spectra viewed through a spectroscope can be used to identify the metal ions in salts used in flame tests.

Explanation:

Bright-line spectra viewed through a spectroscope can be used to identify the metal ions in the salts used in flame tests. Each metal ion has a unique set of energy levels, and when these ions are heated in a flame, their electrons get excited and jump to higher energy levels. As the electrons return to their ground states, they release energy in the form of light. This emitted light can be observed through a spectroscope, which separates the different wavelengths of light, creating a bright-line spectrum. By comparing the bright-line spectrum of an unknown salt to the known spectra of different metal ions, the metal ions present in the unknown salt can be identified.

Answer:

1.[tex]S^{-}(g)+e^{-} \rightarrow S^{2-}(g)[/tex]

2.[tex]Ti^{2+}(g) \rightarrow Ti^{3+}(g) \,\, IE = 2652.5\,kJ.mol^{-1}[/tex]

3.The electron affinity of  [tex]Mg^{2+}[/tex] is zero.

4.[tex]O^{2-}(g) \rightarrow O^{-}(g)+e^{-}[/tex]

Explanation:

1.

Electron affinity:

It is defined as the amount of energy change when an electron is added to atom in the gaseous phase.

The electron affinity of [tex]S^{-}[/tex] is as follows.

[tex]S^{-}(g)+e^{-} \rightarrow S^{2-}(g)[/tex]

2.

Ionization energy:

Amount of energy required to removal of an electron from an isolated gaseous atom.

The third ionization energy of Titanium is as follows.

[tex]Ti^{2+}(g) \rightarrow Ti^{3+}(g) \,\, IE = 2652.5\,kJ.mol^{-1}[/tex]

3.

The electronic configuration of Mg: [tex]1s^{2}2s^{2}2p^{6}3s^{2}[/tex]

By the removal of two electrons from a magnesium element we get [tex]Mg^{2+}[/tex] ion.

[tex]Mg^{2+}[/tex] has inert gas configuration i.e,[tex]1s^{2}2s^{2}2p^{6}[/tex]

Hence, it does not require more electrons to get stability.

Therefore,the electron affinity of  [tex]Mg^{2+}[/tex] is zero.

4.

The ionization energy of [tex]O^{2-}[/tex] is follows.

[tex]O^{2-}(g) \rightarrow O^{-}(g)+e^{-}[/tex]

The electron affinity equation for S⁻ is S⁻(g) + e⁻ → S²⁻(g). The third ionization energy equation for titanium is Ti²⁺(g) → Ti³⁺(g) + e⁻. The equation representing the electron affinity of Mg²⁺ is Mg²⁺(g) + e⁻ → Mg³⁺(g). The ionization energy equation for O²⁻ is O²⁻(g) → O³⁻(g) + e⁻.

1. The electron affinity of S⁻: The electron affinity represents the energy change that occurs when an electron is added to a neutral atom or ion. For sulfur (S⁻), the equation representing this process is: S⁻(g) + e⁻ → S²⁻(g). Here, the physical state of S⁻ and S²⁻ is gas.

2. The third ionization energy of titanium: Ionization energy is the energy required to remove an electron from an atom or ion. For titanium, the equation representing the third ionization energy is: Ti²⁺(g) → Ti³⁺(g) + e⁻. The physical state of Ti²⁺ and Ti³⁺ is gas.

3. The electron affinity of Mg²⁺: The electron affinity of a cation, such as Mg²⁺, is the energy change when an electron is added to the cation. Here, the equation representing this process is: Mg²⁺(g) + e⁻ → Mg³⁺(g). The physical state of Mg²⁺ and Mg³⁺ is gas.

4. The ionization energy of O²⁻: Ionization energy is the energy required to remove an electron from an atom or ion. For oxygen, the equation representing the ionization energy of O²⁻ is: O²⁻(g) → O³⁻(g) + e⁻. The physical state of O²⁻ and O³⁻ is gas.

https://brainly.com/question/14135172

#SPJ3

Answer:

elemental form,  readily form compounds

Explanation:

Copper, silver, and gold have all been know since ancient times because they appear in nature in_elemental form___ and were thus discovered thousands of years ago. But the majority of elements__readily form compounds_and, consequently, are hard to find in nature.

Answer:

-87.4 kJ/mol

Explanation:

We can rewrite Arrhenius' equation as:

ln(k₂/k₁) = -Ea/R * (1/T₂ - 1/T₁)

Where k₂ and k₁ are the rates of the reaction at temperatures T₂ and T₁, Ea is the activation energy and R is the universal gas constant.

For this problem:

k₂ = 5

k₁ = 17

T₂ = 15°C = 288.16 K

T₁ = 25°C = 298.16 K

R = 8.314 J/mol·K

We put the data in the equation and solve for Ea:

ln(5/17) = -Ea/8.314 J/mol·K * (1/288.16K - 1/298.16K)

-1.224 = -Ea/8.314 J/mol·K * 1.1639x10⁻⁴K⁻¹

Ea = -87416.78 J/mol ≅ -87.4 kJ/mol

Answer:

SO₂

Explanation:

The dipole-dipole force is not only determined by the electron density around each atoms in the molecule (dependent of electronegativity difference), but also how the atoms in the molecules are arranged. In general, the more symmetric a molecule is, the less dipole force it exerts as each dipole moments cancels each other out.

Now let's examine each answer

Answer:

Phosphorus cycle

Explanation:

Biogeochemical cycle, any of the natural pathways by which essential elements of living matter are circlated.

There are four types of biogeochemical cycle, they are ; water cycle,carbon cycle,nitrogen cycle and phosphorous cycle

Carbon cycle is the cycle in which photosynthesis and cellular respiration take place.

Water cycle involves transpiration.

Nitrogen cycle Is the cycle that is dependent upon bacteria for nitrogen fixation and denitrification.

Phosphorus cycle is one of the slowest biogeochemical cycle. It does not stay in the atmosphere, because it is normally in a liquid state at room temperature. It does not include the atmosphere.

Final answer:

The phosphorus cycle is the biogeochemical cycle that does not include an atmospheric component, differentiating it from cycles like water, carbon, and nitrogen.

Explanation:

The biogeochemical cycle that does not include the atmosphere is the phosphorus cycle. Unlike the water, carbon, and nitrogen cycles, the phosphorus cycle does not involve the atmospheric pathway. Phosphorus mainly cycles through rocks, soil, water, and living organisms. It is essential for life as part of DNA, RNA, and ATP molecules, which are vital for genetic information and energy transfer in cells. However, phosphorus doesn't enter the atmosphere in a gaseous phase; hence, it is distinct amongst biogeochemical cycles.

Answer:

A, B, & C

Explanation:

got it right on edu

The thermal energy of the bathtub can be increased by adding hot water, heating the water, and adding more water to the tub at the same temperature. Thus, options A, B, and C are correct.

Thermal energy is the increase in the collision and the kinetic energy of particles of matter due to a rise in the temperature of the substance. This movement produces energy called thermal energy.

The thermal energy of the substance can be increased by providing them with the same energy molecules. The addition of the hot water will increase the energy due to increased collision of the particles of the hot water.

Heating the water will increase the kinetic energy and the rate of a collision resulting in increased thermal energy. Also, water with the same temperature can be added to increase energy.

Therefore, in options A, B, and C adding hot water and heating water increases the thermal energy.

Learn more about thermal energy here:

https://brainly.com/question/14506133

#SPJ2

Answer:

Potassium

Explanation:

The description here fits potassium. Potassium is not found alone in nature as it is very reactive. Hence, it tends to occur in relation with other elements because of its high reactivity.

Because it is stated that it gives up its single valence electron, this shows that it belongs to group one of the periodic table. We might be tempted to think hydrogen is the correct answer. But it is interesting to note that hydrogen is not even supposed to be placed in group one at all. It is only placed there for convenience

Ionic solids are more likely to dissolve in water and can become better conductors of electricity via chemical substitution.

Both covalent-network solids and ionic solids have different properties. Ionic solids dissolve readily in water and can conduct electricity when melted or dissolved because their ions are free to move. Covalent-network solids, on the other hand, are insoluble in water and are poor conductors of electricity in any state because their particles are electrically neutral.

https://brainly.com/question/32707562

#SPJ3

Answer:

[tex]Age=2.52*10^9 years[/tex]

Explanation:

To determine the age, we need to know how much U have become Pb, so first we have to calculate the Pb moles present in a sample:

[tex]n_{Pb}=\frac{0.337g}{206g/mol}=0.00164 mol[/tex]

[tex]n_{U}=\frac{1 g}{238g/mol}=0.0042 mol[/tex]

The percentage of U degradation:

[tex]P=\frac{n_{Pb}}{n_{Pb}+n_{U}}[/tex]

[tex]P=\frac{0.00164}{0.00164+0.0042}=0.28[/tex]

Assuming that the life time is linear:

[tex]Age=\frac{4.5*10^9 years}{0.5 life time}*0.28 life time[/tex]

[tex]Age=2.52*10^9 years[/tex]

Answer:

7.1 x 10^9 years

Explanation:

This is the answer according to Mastering Chemistry.

Answer:

a. 5 0 0 +1/2

5 0 0 -1/2

Valid

b. 4 1 -1 +1/2

4 1 0 +1/2

4 1 +1 +1/2

Valid

c. 3 2 -1 +1/2

3 2 0 +1/2

3 2 +1 +1/2

3 2 0 +1/2

3 2 +2 +1/2

Pauli violation

d. 3 1 -1 +1/2

3 1 0 +1/2

3 3 +1 +1/2

other violation

Explanation:

The four quantum number and possible values are:

n = 1,2,3.....

l = 0 , (n-1), (n-2).....

m = +l , 0 , -l

s = [tex]+\frac{1}{2}[/tex] or [tex]-\frac{1}{2}[/tex]

Pauli's exclusion principle: No two electrons in an atom can have all the four quantum numbers same.

Let us check each case:

a. 5 0 0 +1/2

5 0 0 -1/2

Valid

b. 4 1 -1 +1/2

4 1 0 +1/2

4 1 +1 +1/2

Valid

c. 3 2 -1 +1/2

3 2 0 +1/2

3 2 +1 +1/2

3 2 0 +1/2

3 2 +2 +1/2

Pauli violation

The two electrons have same four quantum numbers

3 2 0 +1/2

3 2 0 +1/2

d. 3 1 -1 +1/2

3 1 0 +1/2

3 3 +1 +1/2

other violation

As mentioned above in the condition the value of "l" can be only less than "n"

So for 3 3 +1 +1/2 : n = 3 and l= 3, which is not valid.

The arrangement of electrons in orbitals are showed by four sets of quantum numbers.

According to the Pauli exclusion theory, no two electrons in an atom should have all the four quantum numbers as the same. According to this principle, the spin quantum number of electrons in an atom must differ even if they are in the same orbital.

For the first set;

5 0 0 +1/2

5 0 0 -1/2

This set, correctly corresponds to the 5s  orbital so it is valid.

For the second set;

4  1  -1  +1/2

4  1  0  +1/2

4  1  +1  +1/2

This should have corresponding to the 4p orbital so it is valid.

For the third set;

3  2 -1  +1/2

3  2  0  +1/2

3  2  +1  +1/2

3  2  0  +1/2

3  2 +2  +1/2

This set should correspond to a 3d orbital but we can see that are two electrons in the set that has exactly the same quantum numbers of 3 2 0 +1/2. This violates the Pauli exclusion theory so we should mark "Pauli violation".

For the fourth set:

3  1  -1  +1/2

3   1   0  +1/2

3  3  +1  +1/2

This set should have corresponded to a 3p orbital but remember that the values of l only range from 0 to (n - 1). This means that we can not have n =3, l=3 so the arrangement 3  3  +1  +1/2 is not possible. We should mark  "other violation".

Learn more: https://brainly.com/question/18835321

Answer: The concentration of [tex]Au^{3+}[/tex] is [tex]1.096\times 10^{-6}[/tex]

Explanation:

The given chemical cell follows:

[tex]Pt(s)|H_2(g,1atm)|H^+(aq,1.0M)||Au^{3+}(aq,?M)|Au(s)[/tex]

Oxidation half reaction: [tex]H_2(g,1atm)\rightarrow 2H^{+}(aq,1.0M)+2e^-;E^o_{2H^{+}/H_2}=0.0V[/tex]       ( × 3)

Reduction half reaction: [tex]Au^{3+}(aq,?M)+3e^-\rightarrow Au(s);E^o_{Au^{3+}/Au}=1.50V[/tex]       ( × 2)

Net cell reaction: [tex]3H_2(g,1atm)+2Au^{3+}(aq,?M)\rightarrow 6H^{+}(aq,1.0M)+2Au(s)[/tex]

Oxidation reaction occurs at anode and reduction reaction occurs at cathode.

To calculate the [tex]E^o_{cell}[/tex] of the reaction, we use the equation:

[tex]E^o_{cell}=E^o_{cathode}-E^o_{anode}[/tex]

Putting values in above equation, we get:

[tex]E^o_{cell}=1.50-(0.0)=1.50V[/tex]

To calculate the EMF of the cell, we use the Nernst equation, which is:

[tex]E_{cell}=E^o_{cell}-\frac{0.059}{n}\log \frac{[H^{+}]^6}{[Au^{3+}]^2}[/tex]

where,

[tex]E_{cell}[/tex] = electrode potential of the cell = 1.23 V

[tex]E^o_{cell}[/tex] = standard electrode potential of the cell = +1.50 V

n = number of electrons exchanged = 6

[tex][H^{+}]=1.0M[/tex]

[tex][Au^{3+}]=?M[/tex]

Putting values in above equation, we get:

[tex]1.23=1.50-\frac{0.059}{6}\times \log(\frac{(1.0)^6}{[Au^{3+}]^2})[/tex]

[tex][Au^{3+}]=-1.0906\times 10^{-6},1.096\times 10^{-6}[/tex]

Neglecting the negative value because concentration cannot be negative.

Hence, the concentration of [tex]Au^{3+}[/tex] is [tex]1.096\times 10^{-6}[/tex]

Answer:

The amount of air is 11.1 mmol

Explanation:

Density shows the relation between mass and volume, so you can know the mass which has been sealed in the Erlenmayer.

Density = mass/ volume

Density . volume = mass

0.001185 g/ml . 272.2 ml = 0.322 g

We have the mass now, so the molar weight determinates the mols

Mass/molar weight = mol

0.322g/ 28.96 g/m = 0.0111 mol

To get a better number we can inform on milimols

Mols . 1000 = milimols

The amount of air sealed in the 272.2 mL Erlenmeyer flask is approximately 0.0111 mol, calculated using the given density and molar mass of air at 25°C.

To determine the amount of air sealed in the flask, we need to use the density of the air (given as 0.001185 g/mL at 25°C), the volume of the flask and the molar mass of air.

First, using the density and the volume of the flask, we can calculate the mass of the air in the flask with the formula density = mass/volume. We multiply the given density of 0.001185 g/mL by the volume of 272.2 mL to find the mass of the air to be around 0.3224 g.

Next, to convert this mass to moles, we use the given molar mass of air (28.96 g/mol). Moles = mass / molar mass, hence the air in the flask is approximately 0.0111 mol. Thus, there is approximately 0.0111 mol of air sealed in the Erlenmeyer flask.

https://brainly.com/question/31955778

#SPJ11

Answer:

c) No, because Celsius is not an absolute temperature scale

Explanation:

converting  5 oC to kelvin which is the absolute temperature scale gives = 273 + 5 = 278 K

and converting 20 oC to kelvin = 20 + 273 = 293 K

the ratio = 278 / 293 = 0.94 approx 1 not 4

Answer:

B) Iron(lll) phosphate, FePO4

Option.B-Iron(lll) phosphate, FePO4  is the correct answer.

A monoclinic crystal powder with the chemical formula FePO4, ferric phosphate is sometimes referred to as ferric phosphate and ferric orthophosphate.

To know more about similar question click here-

https://brainly.com/question/14307431

#SPJ2

Explanation:

As the given reaction equation is as follows.

         [tex]N_{2}(g) + O_{2}(g) \rightleftharpoons 2NO(g)[/tex]

Hence, expression for [tex]K_{p}[/tex] of this reaction is as follows.

        [tex]K_{p} = \frac{P^{2}_{NO}}{P_{N_{2}} \times P_{O_{2}}}[/tex]

Now, putting the given values into the above expression as follows.

         [tex]K_{p} = \frac{P^{2}_{NO}}{P_{N_{2}} \times P_{O_{2}}}[/tex]

                 = [tex]\frac{(0.050)^{2} atm}{(0.15 atm) \times (0.33 atm)}[/tex]  

                 = [tex]5.05 \times 10^{-2}[/tex]

Thus, we can conclude that the value of [tex]K_{p}[/tex] is [tex]5.05 \times 10^{-2}[/tex].

Final answer:

The equilibrium constant, Kp, for the reaction N2(g) + O2(g) = 2 NO(g) at the given conditions is approximately 0.1010 when calculated using the given equilibrium partial pressures.

Explanation:

The question is asking us to calculate the equilibrium constant, KP, for the reaction given the equilibrium partial pressures of the reactants and products at a certain temperature. Using the reaction N2(g) + O2(g) = 2 NO(g), we can express the equilibrium constant KP in terms of the partial pressures of the gases:

KP = (PNO)2 / (PN2 * PO2)

Substituting in the given partial pressures:

KP = (0.050 ATM)2 / (0.15 ATM * 0.33 ATM) = 0.0050 / 0.0495 = 0.1010

So, the equilibrium constant KP at 2200°C for this reaction is approximately 0.1010.

Answer:

1.40 atm

Explanation:

To answer this question we can use Gay-Lussac's law, which states:

When volume and number of moles remain constant.

We put the known data in the equation and solve for P₂:

Using the ideal gas law, the pressure inside an aerosol can increases proportionately with temperature. If the can's temperature is raised to the boiling point of water (100°C or 373 K), the pressure increases from 1.11 atm to 1.40 atm.

The pressure inside an aerosol can, like this one which has a residual propellant, can be explained by the ideal gas law, which states that the pressure of a gas is directly proportional to its temperature when the volume and amount of gas are held constant. If the can is heated to the boiling point of water (100°C or 373 K), we can expect the pressure to increase proportionately.

To find out the new pressure, we need to convert the initial temperature to Kelvin (23°C = 296 K), and then use the formula P1/T1 = P2/T2 where P1 is the initial pressure, T1 is the initial temperature, P2 is the pressure at elevated temperatures, and T2 is the temperature at the boiling point of water.

So, P2 = P1×T2/T1 = 1.11 atm × 373 K / 296 K = 1.40 atm. Therefore, the pressure inside the can at the boiling point of water is 1.40 atm.

https://brainly.com/question/32496824

#SPJ3