what evidence is there for continental drifft?
A force of 200N is needed in order to push a wheelbarrow that weights 1000N. If the wheelbarrow is pushed 30m, how much work is done on the wheelbarrow? What power is required if it takes 10 seconds to push the wheelbarrow?
The work done on the wheelbarrow is 6000 Joules, and the power required to do this work in 10 seconds is 600 Watts.
Explanation:The question asks about the concepts of work, force, and power in a real-world situation. In this case, we can use the equation for work, which is Work = Force x Distance. Given that the force is 200N and the distance is 30m, then by multiplying these two, the work done on the wheelbarrow is 6000 Joules.
Power, on the other hand, is the rate at which work is done. It is computed as Work Done ÷ Time Taken. If the work done is 6000 Joules and it takes 10 seconds, the power required would be 600J/sec or 600W (Watts).
Learn more about Work and Power here:https://brainly.com/question/3854047
#SPJ12
Should people make changes to chemical compounds? This is an opinion question I'm curious of what you guys think!
Anhydrous calcium chloride removes water vapor from the air inside a container having an air-tight seal called a desiccator. Explain
Anhydrous calcium chloride is a desiccant used to remove water vapor from the air in a desiccator to protect sensitive samples. It has a high affinity to water, indicating its saturation by changing the color of indicators like cobalt chloride, and is essential for maintaining sample integrity in laboratories.
Anhydrous calcium chloride (CaCl₂) is a desiccant used to remove water vapor from the air within a sealed container known as a desiccator. This desiccator is often employed to ensure that samples do not reabsorb moisture from the air after being heated or dried. Anhydrous calcium chloride's high affinity for water allows it to effectively absorb water vapor, turning into a hydrated form of the compound.
By using indicators such as cobalt chloride (CoCl₂), which changes color from blue to pink upon hydration, one can easily monitor the status of the drying agent. This is essential because once the desiccant has absorbed all the water it can, it becomes less effective and should be replaced or regenerated. Other hygroscopic substances like Magnesium Chloride (MgCl₂) and calcium sulfate (CaSO₄) can also serve as desiccants, though their water affinity may vary.
Desiccators are also equipped with perforated plates to hold samples and sometimes a stopcock for evacuation. In laboratory settings, drying agents are critical for maintaining the integrity of various chemicals and samples that can be compromised by the presence of water. As such, the selection of an appropriate desiccant and proper use of a desiccator are important laboratory techniques.
a 15.0 kg chunk of ice falls off the top of an iceberg if the chunk of ice Falls 8.00 to the surface of the water what is the kinetic energy of the chunk of ice when it hits the water and what is its velocity how do you work that out
The 15.0 kg chunk of ice, falling 8.00 meters, hits the water with a velocity of approximately 12.52 m/s and has kinetic energy of about 1176 joules.
To determine the kinetic energy and velocity of a 15.0 kg chunk of ice falling from a height of 8.00 meters, we can use the principles of physics.
Velocity Calculation:
We use the formula for the final velocity of a freely falling object:
v = √(2gh)
where:
v is the final velocityg is the acceleration due to gravity (9.8 m/s2)h is the height (8.00 meters)Substitute the values:
v = √(2 * 9.8 m/s2 * 8.00 m) = √(156.8) ≈ 12.52 m/s
Kinetic Energy Calculation:
The kinetic energy (KE) can be calculated using the formula:
KE = 0.5 * m * v2
where:
m is the mass (15.0 kg)v is the velocity (12.52 m/s)Substitute the values:
KE = 0.5 * 15.0 kg * (12.52 m/s)2 = 0.5 * 15.0 * 156.8 ≈ 1176 J
So, the chunk of ice has a kinetic energy of approximately 1176 joules and a velocity of 12.52 m/s upon hitting the water.
how many molecules of CaCl2 are equivalent to 75.9 g CaCl2
Protozoan infection is not likely to be transmitted by:
dog bite
direct contact
breathing
eating
Answer:
breathing
Explanation:
How many moles of water molecules are in 6.81 g of magnesium sulfate heptahydrate (Epsom salts
Magnesium is obtained from sea water. Ca(OH)2 is added to sea water to precipitate Mg(OH)2. The precipitate is filtered and reacted with HCl to produce MgCl2. The MgCl2 is electrolyzed to produce Mg and Cl2. If 185 g of magnesium are recovered from 962 g of MgCl2, what is the percent yield for this reaction? Answer in units of percent
Answer:
The percentage yield of magnessium is 19.231 %
Explanation:
The magnesium from sea water is added to Ca(OH)2 to precipitate Mg(OH)2. This magnesium hydroxide is then reacted with HCl as follows ;
Mg(OH)2 + 2HCl → MgCl2 + 2H2O
molar mass of MgCl2 = 24.305 + 35.453 × 2 = 24. 305 + 70.906 = 95.211 g
The equation is balanced now . And 1 mole or 95.11 g of MgCl2 was produced . The magnesium chloride was electrolyzed to produce Mg and Cl2.
The total mass of MgCl2 obtained = 962 grams
mass of the Mg obtained = 185 grams
The percentage yield for the magnesium = 185 / 962 × 100 = 18500/962
The percentage yield for the magnesium = 185 / 962 × 100 = 19.231 %
The percentage yield of magnessium is 19.231 %
how many grams of NA required to react with 75.0 gramsof CL2?
It would take one light year to travel to the sun?
True or false?
which of the following why use approximately represent the number of atoms in one mole of gold
A. 3.26 x 1026
B. 2.30 x 106
C. 12.04 x 1024
D. 6.02 x 1023
How can humans decrease the rate of endangered or extinct species? Question 4 options: Introduce new predators to an environment. Minimize habitat destruction. Pollute other environments. Create and populate more zoos.
The answer is B: Minimize Habitat Destruction
I WILL GIVE BRAINLIEST!!!!!!!!!!!!!! Hanson is designing an experiment to test the porosity of a soil sample. His experiment involves the following:
Place the soil sample in a water-tight container.
Slowly pour water into the container.
Measure the volume of water that the soil absorbs.
Which of the following would improve Hanson's experiment?
A.if he measured the volume of the soil beforehand**
B.
if he measured the mass of the water beforehand
C.
if he measured the porosity of the water beforehand
D.
if he measured the mass of the soil beforehand
is wood a compound, element or mixture
What happens when the temperature of an object increases?
A. The object's particles move closer together.
B. The object's particles stop moving.
C. The number of the object's particles increases.
D. The object's Particles move faster.
Suppose a grill lighter contains 50.0 g of butane. How many grams of butane in the lighter would have to be burned to produce 17.9 L of carbon dioxide at STP
Answer is: mass of burned butane is 11.6 g.
Chemical reaction: 2C₄H₁₀ + 13O₂ → 8CO₂ + 10H₂O.
m(butane) = 50,0 g.
V(CO₂) = 17,9 L.
n(CO₂) = V(CO₂) ÷
Vm.
n(CO₂) = 17,9 L ÷ 22,4 L/mol.
n(CO₂) = 0,8 mol.
From chemical reaction n(CO₂) :
n(C₄H₁₀) = 8 : 2.
n(C₄H₁₀) =
0,8 mol ÷ 4.
n(C₄H₁₀) =
0,2 mol.
m(C₄H₁₀) =
n(C₄H₁₀) · M(C₄H₁₀).
m(C₄H₁₀) =
0,2 mol · 58 g/mol.
m(C₄H₁₀) =
11,6 g.
Heat is an exchange of internal energy from one system to another due to
A. a temperature difference between the systems.
B. one system being gas and the other being solid.
C. the systems having the same temperature.
D. one system being liquid and the other being solid.
This is ether physics or chemistry i don't know
What is the difference between a seismograph and seismogram?
A) A seismograph is an instrument that records movements within the earth. A seismogram is an instrument that monitors the earth's core.'
B) A seismograph is an instrument that records movements within the earth. A seismogram is the actual recording that scientists look at when studying earthquakes.
C) A seismograph is an instrument that monitors the earth's core. A seismogram is an instrument that records movements within the earth.
D) A seismograph is the actual recording that scientists look at when studying earthquakes. A seismogram is an instrument that records movements within the earth.
Q 2)
Which word describes the nature of the inner core of the earth?
A) Plastic
B) Solid
C) Liquid
D) Gaseous
A seismograph is an instrument that detects and records the vibrations caused by earthquakes, while a seismogram is the recorded data or output from a seismograph. The inner core of the Earth is solid due to the immense pressure that forces atoms closely together, despite the high temperatures.
Explanation:The key difference between a seismograph and a seismogram lies in the role they play in studying seismic activity. A seismograph is an instrument that records movements within the Earth, measured by the intensity and duration of earthquakes. It essentially measures the vibrations caused by an earthquake. On the other hand, a seismogram is the actual recording produced by a seismograph. It is the visual output, typically a graph or chart, that scientists look at when studying earthquakes.
As for your second question, the inner core of the Earth is described as solid. Despite the extremely high temperatures, the immense pressure at the core forces atoms closely together, resulting in a solid state.
Learn more about Seismograph and Seismogram here:https://brainly.com/question/34661571
#SPJ6
Which letter is closest to the warm front, and which is closest to the cold front
Without the process of transpiration, what might happen to a plant?
A.
It might turn orange.
B.
It would grow more slowly.
C.
It would have fewer leaves.
D.
It might burst.
Transpiration is the process of release of water from the plants. In the absence of transpiration, the plant bursts. Thus, option D is correct.
How the process of transpiration takes place?The transpiration process is the release of water from the plants through stomata. The pressure of water allows the movement of the stomatal guard cell, and the stomata opens.
The opening of stomata releases the water inside the plants, and release of pressure results in the relaxation of stomata, thereby closing the stomata.
The absence of transpiration in plants results in the accumulation of water inside the body. The access water in the body exerts the force to the plant body, and it may burst.
Therefore, in the condition of loss of transpiration by the plants, the plant may burst out. Thus, option D is correct.
Learn more about transpiration, here:
https://brainly.com/question/13891305
Find the pressure, in atmosphere, exerted by a mixture which contains three gases with partial pressures of 448 torr, 321 mm Hg and 1.72 atm
What are the steps that 1-pentyne goes through to become N-ethyl pentanamide?
Calcium and sulfur ionic compound or non ionic?
Final answer:
Calcium and sulfur combine to form the ionic compound calcium sulfide, written as CaS, due to the metal calcium cation combining with the nonmetal sulfur anion to balance the charges.
Explanation:
A compound consisting of calcium and sulfur forms an ionic compound. Calcium is a group 2 element and forms a calcium cation (Ca2+), while sulfur is a group 16 element and forms a sulfide anion (S2-). In an ionic compound, the total charge of the cations and anions must be equal. Therefore, one calcium ion will combine with one sulfur ion to form the compound calcium sulfide, which is written as CaS. This compound is ionic because it consists of a metal (calcium) and a nonmetal (sulfur) element.
Relate metallic bonds to the properties of metals.
Metallic bonds contribute to the characteristic properties of metals such as electrical and heat conductivity, malleability, ductility, luster, high melting points, and density due to the free movement of valence electrons and the strong attraction between metal ions and these electrons.
Explanation:The Relationship Between Metallic Bonds and Metal Properties
Metallic bonds are the force of attraction between positively charged metal ions and the valence electrons that surround them. This creates a lattice-like structure where electrons are free to move. This electrical conductivity is due to electrons being able to flow through the metal, allowing it to carry an electric current. Similarly, the close packing of positive nuclei in metals enables efficient heat conduction.
Metallic bonds also give metals their malleability (the ability to be hammered into sheets) and ductility (the capacity to be stretched into wires), because the layers of atoms can slide past each other without breaking the metallic bonds. The sharing of valence electrons among a sea of metal ions also accounts for the metals' characteristic luster, as electrons absorb and re-emit light energy.
Due to the strength of the metallic bonds, metals typically exhibit high melting points. The tight packing of the atomic structure, resultant from these bonds, also explains the high density commonly associated with metallic substances. Furthermore, metals often form cations in compounds due to the ease with which they can lose valence electrons, a trait that is tied to their metallic bonding nature.
Metallic bonds form a 'sea of electrons' that accounts for the unique properties of metals. This includes high electrical and thermal conductivity, malleability, ductility, and metallic lustre. Examples of metals with these properties are aluminum, copper, and iron.
Metallic Bonds and Properties of Metals:
Metallic bonds are formed between metal atoms due to the unique electronic structure of metals. These bonds are characterized by a 'sea of electrons' where valence electrons are free to move around the fixed cations. This freedom of electrons accounts for various properties of metals.
High electrical conductivity: The free-moving electrons allow metals to easily conduct electricity.High thermal conductivity: Metals can efficiently transfer heat because of the same free electrons.Malleability and ductility: The ability to move and rearrange without breaking bonds allows metals to be hammered into sheets and drawn into wires.Metallic lustre: The movement of electrons gives metals their shiny appearance.High melting points and density: Strong bond interactions contribute to these properties.Examples include aluminum, copper, and iron, each demonstrating these characteristic features due to metallic bonding.
Describe how to separate a mixture of pigments from an ink cartridge. Enter your answer in the space provided.
You would use Chromatography. I hope that this answer helps :)
The energy driving a windmill each minute equals 2.75 kilojoules. If 1.6 kilojoules of energy is given up by the windmill as thermal energy from friction and electrical resistance how many kilojoules of energy are provided as electricity to the power line?
Answer:
1.15 Kilo-joules are provided as electricity
Explanation:
The law of conservation of energy states that: "Energy can neither be created nor destroyed, but can convert from one form to another".
Applying this on the givens, we would find that:
driving energy = energy provided as electricity + energy lost as heat
2.75 = energy provided as electricity + 1.6
energy provided as electricity = 2.75 - 1.6 = 1/15 kilo-jo
How much Ca3(PO4)2(s) could be produced in an industrial process if 55.00g of CaCl2 In solution reacted completely wth sufficient Na3(PO4)(aq)
If 55g of CaCl2 reacts completely with sufficient Na3PO4, approximately 232.5 g of Ca3(PO4)2 could be produced in an industrial process.
Explanation:To calculate how much Ca3(PO4)2 could be produced, we need to first know the reaction between CaCl2 and Na3PO4. The balanced equation for this reaction is:
2CaCl2 (aq) + Na3PO4 (aq) -> 3Ca3(PO4)2 (s) + 6NaCl (aq)
From this, we can see that 2 moles of CaCl2 react to form 3 moles of Ca3(PO4)2.
Now let's use stoichiometry to do the calculation. First, calculate the number of moles of CaCl2. The molar mass of CaCl2 is approximately 111 g/mol, so 55g of CaCl2 is about 0.5 moles.
According to the balanced equation, 0.5 moles of CaCl2 will produce 0.75 moles of Ca3(PO4)2. The molar mass of Ca3(PO4)2 is about 310 g/mol, so 0.75 moles of Ca3(PO4)2 is about 232.5 g.
In conclusion: If 55g of CaCl2 reacts completely with sufficient Na3PO4, approximately 232.5 g of Ca3(PO4)2 could be produced in an industrial process.
Learn more about Stoichiometry here:https://brainly.com/question/30218216
#SPJ12
Will give brainliest. ______ record the shape and structures of an organism.
A.Trace fossils
B.Body fossils
C.Bone fossils
D.Cast fossils
Fossils are the preserved remaining, impressions or traces of prehistoric organisms.
Trace fossils are the naturally preserved evidence of animal activity like footprints of animals.
Body fossils are formed from the remaining of dead animals and plants like bones, teeth etc.
Bone fossils are the remaining of bones.
Cast fossils are formed by hardening of mud or sand that is filled in the mold and thus gives the shape of the organism
Thus, option D that is cast fossils record the shape and structures of an organism.
jordan's puppy has a mass of 5480 milligrams , what is the puppy's mass in grams ?
Final answer:
To convert the mass of Jordan's puppy from milligrams to grams, divide the mass in milligrams by 1000. The puppy has a mass of 5.48 grams.
Explanation:
To convert the mass of Jordan's puppy from milligrams to grams, we need to divide the mass in milligrams by 1000. This is because there are 1000 milligrams in 1 gram.
So, to convert 5480 milligrams to grams, we divide 5480 by 1000:
5480 mg ÷ 1000 = 5.48 g
Therefore, Jordan's puppy has a mass of 5.48 grams.