Engineering High School

Two technicians are discussing scan-tool use. Technician A says that a special diagnostic interface device is needed to connect the vehicle to the laptop computer. Technician B says that all of the computers in a modern vehicle are connected through an SAE-standard J1939 CAN (Central Area Network) or LAN (Local Area Network) connection. Who is correct?


A. Technician B only

B. Neither Technician A nor B

C. Both Technicians A and B

D. Technician A only

ANSWER: Both technicians are correct, I have taken the test.

Answers

Answer 1

Answer:

both technicians are correct, I haven't taken the test

Answer 2

Answer:

C. Both Technicians A and B

Explanation:

C. Both Technicians A and B  because the reason given are correct. Technicians A reason is a olden method while Technician B method is new and can work for modern vehicle.

Related Questions

A 13-L kerosene tank (ρ = 820 kg/m3) is filled with a 2-cm-diameter hose equipped with a 1.5-cm-diameter nozzle meter. If it takes 18 s to fill the tank, determine the pressure difference indicated by the nozzle meter. The pressure difference indicated by the nozzle meter is kPa.

Answers

Answer:

what exactly are you asking I'm confused

Communication "works" to the degree that a wide variety of information is completely and thoroughly shared among the parties, and mutual understanding is reached.

Answers

Answer:

Hook's law holds good up to. A elastic limit. B. plastic limit. C.yield point. D.Breaking point

Which of the following kinds of ocean pollution is an example of point source pollution? Cooling water from a shoreline power plant Fertilizers from suburban lawns Pesticides from agriculture Trash that is washed down storm drains Road oil residue from automobiles

Answers

Answer:

Cooling water from a shoreline power plant

Explanation:

Out of all of these options it is the only one coming from a single source hence the name point source pollution

Which of the following is an easy way to remember the modified “X” tire rotation?
A. Nondrive wheels straight, cross the drive wheels

B. Drive wheels straight, cross the nondrive wheels

C. Drive wheels crossed, nondrive wheels straight

D. Drive wheels crossed, nondrive wheels crossed

Answers

Answer:

  B.  Drive wheels straight, cross the non-drive wheels

Explanation:

This can be shortened to "cross to drive". This rotation pattern only applies to non-directional tires.

If tires have a preferred rotation direction, they can only be swapped front-to-rear (and vice versa) on the same side of the vehicle, so the rotation direction does not change.

Final answer:

The modified “X” tire rotation is easily remembered as moving the nondrive wheels straight, and crossing the drive wheels. It involves moving the front tires straight back to the rear while the rear tires move to the opposite front sides, forming an “X” pattern in their movement.

Explanation:

The easy way to remember the modified “X” tire rotation is to memorize option A: Nondrive wheels straight, cross the drive wheels. This method involves moving the front tires straight back to the rear, while the rear tires are moved to the opposite sides of the front. Essentially, you create an “X” pattern with the tires’ movement. This rotation pattern is helpful in maintaining an even wear on all tires, which can extend their lifespans.

Learn more about “X” tire rotation here:

https://brainly.com/question/32020204

#SPJ2


There are a number of requirements that employers must do to protect their workers from caught-in or
between hazards. Which of these is required if the worker's body, hands or clothing may come into contact
with moving parts?
O A Prevent workers from being pinned under heavy equipment
O B. Provide guards on power tools and other equipment with moving parts
O C. Provide protection to workers in an excavation or trench
OD. Protect workers from collapsed scaffolding

Answers

Answer:

B.Provide guards on power tools and other equipment with moving parts

Explanation:

A guard/ safeguard is a machine feature that is on/around an engineering equipment which can prevent the contact of a user with hazardous parts of the machines such as point of operation and rotating parts.The guard can be on power tools to enable an alternataive ways of switching off the equipment when a danger scenario occurs.When using a tool/equipment, safeguards must be on/active.

4. Which of these is NOT a safe skill to employ in the presence of road
workers?
U
A. Keep alert and watch out for construction barrels or cones
B. Slow down even if you don't think you'll hit a road worker
C. Drive at the posted speed limit
D. Keep as much distance as you can while navigating around them

Answers

An action which isn't a safe skill to employ in the presence of road workers is to: C. drive at the posted speed limit.

What is a speed limit?

A speed limit can be defined as the maximum amount of speed that is permitted or allowed in a specific area. Thus, this limit must be abided and adhered to by all road users such as drivers.

In this context, driving at the posted speed limit is an action which isn't a safe skill to employ in the presence of road workers because the conditions of the road are not optimum or the best.

Read more on safe skill here: https://brainly.com/question/14751268

#SPJ2

Other Questions
Select the correct definition of the word, using the dictionary if necessary. pantomime 1) acting with gestures that complement and emphasize the words being spoken 2) acting without words using gestures and movement to tell a story or explain a mood A 0.9440 g sample of a mixture of NaCl and KCl is dissolved in water, and the solution is then treated with an excess of AgNO3 to yield 1.903 g of AgCl. Calculate the percent by mass of each compound in the mixture. Which rate describes a unit price? $0.01 for 12 seconds $0.25 for 5 minutes $1.00 for 4 hours $5.00 for 1 day What is the range of f(x)= 5^x Arthur is comparing the prices of two rental car companies. Company A charges $22 per day and an additional $5 as service charges. Company B charges $20 per day and an additional $16 as service charges. You are the CEO of a company that has to choose between making a $100 million investment in either Russia or Poland. Both investments promise the same long-run return, so your choice of which investment to make is driven by considerations of risk. Assess the various risks of doing business in each of these nations. Which investment would you favor and why? Children who are born in the US don't have to worry about their undocumented parents being deported because when an undocumented person has a child in the US, that undocumented person/parent then becomes a citizen. (True/False) Please help me out! Which word best describes a voter at the political center?liberalmoderateprogressiveconservative An elderly client who has a documented history of dementia is intermittently alert and can currently tell you her name. Who should sign the client's informed consent for an invasive diagnostic procedure? Jorge bought stock in a restaurant for $300. His stock is now worth $323. Complete the statement, rounding to two decimal places if necessary.The percentage change is .... The main purpose of Reconstruction was to You vividly remember where you were when you heard about the Boston Marathon bombing. What you remember is a(n) ________ memory and you are likely to be ________ a memory for an ordinary event. In circle A below, if angle BAC measures 30 degrees, what is the measure of arc BC? Select which of the following have an impact on the Earth's climate:HumansPlantsEarth's orbitAll LifeIce composition Find x in this porportion 5/2x =25/4 In the following scenario, what is the father displaying? Jim and his father are shopping for a birthday present for his sister, Sally. Jim chooses a truck that Sally can play with in the sand. Jims father says, No, lets get her a girl toy, like this doll. A satellite orbits the earth in a circle with constant speed. Which of the following is true? The net force on the satellite is zero because the satellite is not accelerating. The net force on the satellite is directed forward, in the direction of travel. The net force on the satellite is directed straight down, toward the Earth. The net force on the satellite is directed outward, away from the Earth. _______ are people who take it upon themselves to handle the pain and stressors that are part of everyday life in organizations. Stress handlers Dystress handlers Eustress handlers Scapegoats Toxin handlers MNO Corporation uses a job-order costing system with a predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on the following data:Total estimated direct labor-hours 50,000Total estimated fixed manufacturing overhead cost $ 285,000Estimated variable manufacturing overhead per direct labor-hour $ 3.80Recently, Job P123 was completed with the following characteristics:Total actual direct labor-hours 20Direct materials $ 710Direct labor cost $ 500The total job cost for Job P123 is closest to: (Round your intermediate calculations to 2 decimal places.)