Using the flowchart above, which decision statement will correctly check that hoursWorked is greater than or equal to the FULL_WEEK constant?

a.
hoursWorked >= FULL_WEEK

b.
hoursWorked > FULL_WEEK

c.
hoursWorked == FULL_WEEK

d.
hoursWorked != FULL_WEEK

Answer:

The advantages of ARP implemented as broadcast is that it enables easy and faster transfer of messages in a network. The disadvantage of ARP is that many of the nodes in the network may update their ARP cache locally without forwarding it to other nodes.

Explanation:

Address resolution protocol(ARP) has both advantages and disadvantages when implemented as broadcast. Broadcast technology enables to transmit messges across all the nodes.

The advantages of ARP implemented as broadcast is that it enables easy and faster transfer of messages in a network. The disadvantage of ARP is that many of the nodes in the network may update their ARP cache locally without forwarding it to other nodes.

Answer:

Core Banking is the system which is defined as the backbone  of products and service that Bank offers. with the upcoming technology it becomes a value differentiator, and a wrong system selection  that may cost tremendous opportunity losses. Core banking solution are transformed in the way bank used to operate in different manner.

 The requirement analysis for CORE-BANKING is:

Answer:

The correct answer is a. Machine code

Explanation:

The syntax of a language is a set of rules that indicates how to write programs.

A compiler is a system that in most cases has to handle an incorrect entry. Especially in the early stages of creating a program.

Syntactic errors are those that occur at the time of writing the program in the high level programming language and that do not comply with the grammatical rules of said programming language. These errors are generally detected by the compiler itself, since it only translates programs that are ''well written''. Therefore, a program that contains syntactic errors can never be compiled.

In summary, syntax errors are detected in the process of translating source code into binary code. On the contrary that happens with the errors of execution and of logic, that can only be detected when the program in being executed.

Answer:

a. machine code

Explanation:

When we code a program, be it in C, C++, Java, etc,..., the role of the compiler is to translate our code to machine code, so it can be executed.

This only happens if we do not violate any of the language rules. Otherwise, there are going to be compilation errors and we will have to fix our code before it is compiled, that is, translated to machine code.

So the correct answer is:

a. machine code

Answer:

d

Explanation:

all of those are good ways to deal with stress

Answer:

COBOL(Common Business Oriented Language).As the name suggests it is most commonly used to develop business tools and hence it is called a professional language and it is not used in schools or colleges as a teaching tool like FORTAN hence it is not called a taught Language.

COBOL is also used to develop business applications.It is mainly designed for businesses.

Answer:

A. Byte, C. Integer, and D. Float

Explanation:

Great question, it is always good to ask away and get rid of any doubts that you may be having.

To answer this question we need to know what a primitive type actually is.

Primitive Data Types: are data entries that have a specific simple value of the kind that is entered. Examples of these are Bytes, Integers, Char, and Float.

Non Primitive types hold more than one entries with their own values. Examples of these are String, Array's, and Classes.

Therefore the answer is A. Byte, C. Integer, and D. Float

I hope this answered your question. If you have any more questions feel free to ask away at Brainly.

Answer:

c. Qurdant-3

Explanation:

Those firms must make some drastic changes quickly toavoid further demise and  possible liquidation that fall in Qurdant-3 of grand strategymatrix .

Answer:

#include <iostream>

#include<string.h>

using namespace std;

void printCharacter(string name){

   for(int i=0;name[i]!='\0';i++){

       cout<<name[i]<<endl;

   }

}

int main()

{

   string name;

   cout<<"enter the name: ";

   cin>>name;

   printCharacter(name);

}

Explanation:

first include the two libraries iostream for input/output and string library for using the string.

then, create the main function and declare the variable type string.

cout instruction is used o display the message on the screen.

cin is used to store the value in the name variable.

after that, call the function. The program control move to the the function. In the function for loop is used to print the character one by one until end of the name.

Answer:

False

Explanation:

The command find . -type f -mtime +10  will search for all files in the current directory and its subdirectories which have not been modified in more than 10 days.

-type argument specifies the type of entity to be searched which in this case corresponds to f (or file).

-mtime argument specifies the last modified time check for the files in terms of number of days and not number of minutes.

Explanation:

--!#&?&#&#(-$(-$)-"-)"(-'-)';'!'+%

Answer:

A) A virtual image cannot be formed on a screen.

Explanation:

A virtual image cannot be formed on a screen is correct about images.

A virtual image can be viewed by the unaided eye.

A virtual image can be photographed.

Mirrors don't always produce real images.

The correct statement about images is that a virtual image cannot be formed on a screen, as virtual images are created by diverging light rays. However, they can still be seen and photographed because devices like cameras and the human eye can focus these rays.

The correct statement about images is A) A virtual image cannot be formed on a screen. Virtual images are formed when light rays diverge in front of a mirror or behind a lens, creating an image that appears to be located behind the mirror or lens. Unlike real images, which can be projected onto a screen because they are formed by converging light rays, virtual images are not formed at a point in space where a screen can capture them. However, virtual images can be seen by the unaided eye and can also be photographed, contrary to some misconceptions. This is because cameras and eyes can focus diverging rays to form an image.

Answer:

struct Node{

   int data;

   struct Node *next;

};

Explanation:

Linked list is the data structure which is used to store the series data but not in continuous memory location .

Linked list contain node which store the data and pointer which store the address of next node. If their is no next node, then it store the NULL.

so, the structure must declare the data and a pointer variable.

Answer: d)MTTD

Explanation: MTTD(Mean Time To Detect) is the time for the discovery of the  problem in a system.  It is basically the average time until the problem is noticed by someone. For e.g.- if there is a problem in a computer system at 9:00 am and the problem is noticed at 9:10 am by then user then the MTTD is  10 minutes . So, MTTD gives the mean time for which the system remains available for use.

Answer: 55 Kbits/sec - 64 KBits/sec

Explanation:

Signal System 7 (SS7) is used one of the protocols used for communication for mobile operators and it uses circuit switching. As it uses circuit switching it transfers data using a dedicated channel and hence more comparatively faster.  It communicates and sends signals among Service Switching (SSPs), Signal Transfer Points (STPs), and Service Control Points (SCPs) using a different path apart from the data transfer path.

The data transfer rate which is the transfer of data among the various network elements is 55 Kilo bits/sec - 64 kilo bits/sec.

Answer:

#include <iostream>

using namespace std;

int main() {

   int NUM_VALS;//variable NUM_VALS for the size of the array..

   cout<<"Enter the size of the array"<<endl;

   cin>>NUM_VALS;//taking input the size of the array..

   int hourlyTemp[NUM_VALS]; //declaring array hourlyTemp of size n..

   cout<<"Enter values of the array "<<endl;

   for(int i=0;i<NUM_VALS;i++)

   cin>>hourlyTemp[i];//taking input of hourlyTemp

   for(int i=0;i<NUM_VALS;i++) //for loop for iterating over the array..

   {

       if(i!=NUM_VALS-1)

       cout<<hourlyTemp[i]<<", ";// print statement.

       else

       cout<<hourlyTemp[i];//print statement.

   }

return 0;

}

Explanation:

I have taken NUM_VALS variable for the size of the array hourlyTemp. First i am taking input the size of array form user and after that array elements are also entered by the user.I am iterating over the array using for loop and checking that it is not the last element if it is simply printing it if it is not then printing comma and space also.

Answer:

return

Explanation:

return is the statement which is used to return the value from the function definition to the function calling.

it is also used as exit from the function.

for example:

int count()

{

     return 0;

     printf("hello");

}

In the above the function return 0 without print the message "hello". we can used return any where inside the function for immediately ending the execution of function.

Final answer:

The statement that causes a function to end immediately is the 'return' statement, which halts function execution and returns the flow of execution to where the function was called.

Explanation:

The statement that causes a function to end immediately in most programming languages is a return statement. When the return statement is executed, it ends the function execution and the flow of execution goes back to where the function was called, which can be likened to coming back from a 'detour'. It's important to realize that defining a function also creates a variable with the same name, which can be used to call the function later in the code.

A functional approach to programming includes various other concepts. For instance, to end the function, you have to enter an empty line in some interactive environments like REPLs (Read-Eval-Print Loop), although this is not necessary in a script. The last statement of a function plays a role similar to a 'Note of Finality' in a speech, indicating the end of the logic encapsulated by the function.

Answer:

A and C.

Explanation:

The taskbar and the Start are both shortcuts to use when opening applications. The taskbar is at the bottom of your computer or pc. And the start can be opened by pressing the windows key or clicking on windows at the bottom right (Windows only.)

Hope that helps!

Answer:

Online shopping is the process where costumers buy online goods and products over the internet from the sellers. The basic concept is that it is a e-commerce which runs partially over the internet.  It has grown in popularity over the years because people find it easy to bargain shop and convenient.

Abstract of online shopping :  

The main objective of the online shopping is that easy to use and make it  interactive. It is a web based application for online retailers and users can  view the each product and its complete specifications. It is a user friendly application which also provides drag and drop features so that user can easily add the product to the shopping cart and user can also go online and make changes in the order.

Answer:

A. set_union

Explanation:

The algorithm set_union is used to find the elements in one range of elements that do not appear in another range of elements.

Answer: True

Explanation:

 The meaning of bit pattern are determined by the hardware and software treat them as, different types of computer used different pattern of bit for the instruction because they all are potentially different so the bit pattern are determine accordingly to the function of hardware and the software of particular devices.Instruction are stored in the form of bits in the similar memory as the data. Bit pattern are used to communicate in the memory as the sequence of bits.

Answer:

 Three medical technologies that makes our lives better are:

Answer: True

Explanation:

yes, open addressing can be implemented in several ways as it is a method of collision resolution in hash table. Open addressing can be implemented in different ways as linear probing, quadratic probing and double hashing. As open addressing requires more computation. In open addressing as everything is stored in the same table.

Answer:

#include <iostream>

#include <stdlib.h>

#include <time.h>

using namespace std;

int main()

{

   srand (time(NULL));  //initialize random seed

   int guess;

    int number = rand() % 2;  //generate random number 0 or 1

    cout<<"Enter the guess (0 or 1): ";

    cin>>guess;     //store in guess

    if(number == guess){     //check if number equal to guess

       cout<<"Guess is correct."<<endl;   //if true print correct message.

    }else{

        cout<<"Guess is incorrect."<<endl;  //otherwise print correct message.

    }

    return 0;

}

Explanation:

first include the three library iostream for input/output, stdlib,h for using the rand() function and time for using the time() function.

create the main function and initialize the random number generation seed, then generate the random number using the function rand() from 0 to 1.

after that, take input from user and then with the help of conditional statement if else check if random number is equal to guess number or not and print the appropriate message.

Answer: Interface methods, interface variables and interface markers.

Explanation:

Interface methods are public and abstract by default.

Interface variables can be declared public, static and final

Marker interfaces are simply empty interfaces without any methods.

Answer:

Output:-

Enter number:  

2

Enter number:  

1

Enter number:  

4

Enter number:  

3

Enter number:  

5

Enter number:  

7

Enter number:  

6

Enter number:  

8

Enter number:  

9

Enter number:  

11

Enter number:  

10

Enter number:  

12

Enter number:  

14

Enter number:  

13

Enter number:  

15

Largest number: 15.0

Explanation:

Below is a java program to determine the largest number out of 15 numbers entered: -

import java.util.Scanner;

public class Largest {

double larger(double x,double y){

 if(x>y)

  return x;

 else  

  return y;

}

double findLargest(){

 double y;

 double greatest=0.0;

 Scanner s=new Scanner(System.in);

 for(int i=0;i<15;i++){

  System.out.println("Enter number: ");

  y=s.nextDouble();

  greatest=larger(greatest,y);

 }

 return greatest;

}

public static void main(String[] args){

 Largest l=new Largest();

 System.out.println("Largest number: "+l.findLargest());

}

}

Answer:

The term ‘Internal Recruitment’ refers to the process of identifying and attracting candidates from a certain organization to another position within the same organization.

Instead of opening the position to the public and attracting random candidates some companies may choose to advertise the vacancy internally and only allow members of the staff to apply.

Internal recruitment also refers to a strategy mostly big corporations use to advertise their jobs internally. Due to the size of these companies, these job openings would otherwise go unnoticed by employees in other departments.

Answer and Explanation:

Assembly language is a low- level code or language used for initialization and system testing. It makes use of an assembler to convert codes and instructions in assembly language to executable machine language code.

Answer: To reuse a method means to use a code which has been done or prepared already and just we need to change some of the functionalities.

This helps a great deal of saving time as well as helps in making the code manageable.

Explanation:

This has been practiced since long that methods can be reused. for example we need to build a calculator in c. then we can simply reuse the same method  just we need to change the sign of the operator. So in this process we can speed up our operations and work and also can make the code easy to understand and manage it when we have have to deal with large lines of code.

Final answer:

Reusing a method in programming allows for using the same code in multiple places efficiently and consistently, saving time and reducing the potential for errors. It's the easiest and least disruptive way to add functionality to programs and aligns with sustainable practices.

Explanation:

Reusing a method in programming means employing a piece of code that has already been written to perform a function or a task in multiple places throughout your application. This is akin to creating a tool that can be used repeatedly in different contexts without the need to rewrite the code each time.

Advantages of Reusing Methods:

Well-designed functions and methods enhance the maintainability and scalability of software by allowing the same logic to be utilized in different parts of an application or even in different projects entirely. This reusability can lead to economic and environmental benefits, as it aligns with the principles of reduce, reusable, and recycle.

Explanation:

Infix notation: A+B

Operators are written in-between their operands. Expression  X * ( Y + Z) / P is means: "First add Y and Z together, then multiply the result by X, then divide by P to give the final answer."

Postfix notation : A B +

Operands are written before their operators. Expression given above is equivalent to X Y Z + * P /  

Operators evaluation is always left-to-right, we will not consider brackets for the order.

Prefix notation : + A B

Operands are written after their operators. Expression given above is equivalent to / * X + Y Z P

Operators evaluation is always right-to-left,we will not consider brackets for the order.