Answer: Acetylene : -1,256 kJ/mol
Ethanol : -1,277 kJ/mol
Explanation:
The enthalpy of combustion of acetylene is -1299 kJ/mol and the enthalpy of combustion of ethanol is -1367 kJ/mol.
How to calculate the enthalpy of combustion?To calculate the enthalpy of combustion of each substance, we need to use the equation:
ΔHcombustion = ΣΔHf(products) - ΣΔHf(reactants)
Where ΔHcombustion is the enthalpy of combustion, ΣΔHf(products) is the sum of the enthalpies of formation of the products, and ΣΔHf(reactants) is the sum of the enthalpies of formation of the reactants.
Using the enthalpies of formation (AH) given in the table, we can calculate the enthalpy of combustion of each substance:
Acetylene:
C₂H₂ + (5/2)O₂ → 2CO₂ + H₂O
ΔHcombustion = [2(-393.5) + (-241.8)] - [228.8] = -1299 kJ/mol
Ethanol:
C₂H₅OH + 3O₂ → 2CO₂ + 3H₂O
ΔHcombustion = [2(-393.5) + 3(-241.8)] - [-235.1] = -1367 kJ/mol
Therefore, the enthalpy of combustion of acetylene is -1299 kJ/mol and the enthalpy of combustion of ethanol is -1367 kJ/mol.
Learn more about enthalpies, here:
https://brainly.com/question/13996238
#SPJ7
This question involves two calculations. The answer to the first part will be
used for calculating the second part.
Aluminum powder, Al, will react and burn with oxygen gas, O2, to produce
aluminum oxide, Al2O3, according to the following balanced equation:
4 Al + 302
+ 2Al2O3
a) If 85.1 grams of aluminum react with excess oxygen in the air, how many
grams of aluminum oxide, Al2O3, will theoretically be produced?
b) If after the reaction is completed, 116.9 g of Al2O3 were actually
recovered and measured, what is the percent yield of the reaction?
Answer :
(a) The mass of [tex]Al_2O_3[/tex] produced is, 15.2 grams.
(b) The percent yield of the reaction is, 72.5 %
Explanation :
Part (a) :
Given,
Mass of [tex]Al[/tex] = 85.1 g
Molar mass of [tex]Al[/tex] = 27 g/mol
First we have to calculate the moles of [tex]Al[/tex]
[tex]\text{Moles of }Al=\frac{\text{Given mass }Al}{\text{Molar mass }Al}=\frac{85.1g}{27g/mol}=3.15mol[/tex]
Now we have to calculate the moles of [tex]Al_2O_3[/tex]
The balanced chemical equation is:
[tex]4Al+3O_2\rightarrow 2Al_2O_3[/tex]
From the reaction, we conclude that
As, 4 moles of [tex]Al[/tex] react to give 2 moles of [tex]Al_2O_3[/tex]
So, 3.15 moles of [tex]Al[/tex] react to give [tex]\frac{2}{4}\times 3.15=1.58[/tex] mole of [tex]Al_2O_3[/tex]
Now we have to calculate the mass of [tex]Al_2O_3[/tex]
[tex]\text{ Mass of }Al_2O_3=\text{ Moles of }Al_2O_3\times \text{ Molar mass of }Al_2O_3[/tex]
Molar mass of [tex]Al_2O_3[/tex] = 102 g/mole
[tex]\text{ Mass of }Al_2O_3=(1.58moles)\times (102g/mole)=161.2g[/tex]
Therefore, the mass of [tex]Al_2O_3[/tex] produced is, 161.2 grams.
Part (b) :
Now we have to calculate the percent yield of the reaction.
[tex]\text{Percent yield}=\frac{\text{Experimental yield}}{\text{Theoretical yield}}\times 100[/tex]
Experimental yield = 116.9 g
Theoretical yield = 161.2 g
Now put all the given values in this formula, we get:
[tex]\text{Percent yield}=\frac{116.9g}{161.2g}\times 100=72.5\%[/tex]
Therefore, the percent yield of the reaction is, 72.5 %
What is the mole fraction of NaCl in a mixture containing 7.21 moles NaCl, 9.37 moles KCL, and 3.42
moles LiCI?
Answer : The mole fraction of NaCl in a mixture is, 0.360
Explanation : Given,
Moles of [tex]NaCl[/tex] = 7.21 mole
Moles of [tex]KCl[/tex] = 9.37 mole
Moles of [tex]LiCl[/tex] = 3.42 mole
Now we have to calculate the mole fraction of [tex]NaCl[/tex].
[tex]\text{Mole fraction of }NaCl=\frac{\text{Moles of }NaCl}{\text{Moles of }NaCl+\text{Moles of }KCl+\text{Moles of }LiCl}[/tex]
Now put all the given values in this formula, we get:
[tex]\text{Mole fraction of }NaCl=\frac{7.21}{7.21+9.37+3.42}=0.360[/tex]
Therefore, the mole fraction of NaCl in a mixture is, 0.360
Answer:
.36
Explanation:
16.4 mL of 0.135 M NaOH is used to neutralize 46.9 mL of HCl. The concentration of the HCl solution is ____ M (3 decimal places).
The concentration of the HCl solution is 0.047 M.
Explanation:
Data given about acid and base:
volume of acid Vacid = 46.9 ml
molarity of acid =?
volume of the base (NaOH) = 16.4 ml
molarity of the base = 0.135 M
To know the concentration of the acid in this reaction, the formula used in titration is used. It is
Macid X Vacid = Mbase X Vbase
the formula is rewritten as:
Macid = [tex]\frac{Mbase X Vbase}{Vacid}[/tex]
putting the values in the equation:
Macid = [tex]\frac{0.135 X 16.4}{46.9}[/tex]
= 0.047 M
the concentration of the acid i.e HCl in the solution is of 0.047 M.
How many grams of water can be produced from 15 grams of hydrogen
2H2 + O2 —> 2H2O
Answer:
135g
Explanation:
The equation for the reaction is given below:
2H2 + O2 —> 2H2O
Next, let us calculate the mass of H2 that reacted and the mass of H2O produced from the balanced equation. This is illustrated below:
Molar Mass of H2 = 2x1 = 2g/mol
Mass of H2 from the balanced equation = 2 x 2 = 4g
Molar Mass of H2O = (2x1) + 16 = 2 + 16 = 18g/mol
Mass of H2O from the balanced equation = 2 x 18 = 36g
From the balanced equation,
4g of H2 produced 36g of H2O.
Therefore, 15g of H2 will produce = (15x36)/4 = 135g of H2O
From the calculations made above, 15g of H2 produced 135g of water (H2O)
Final answer:
15 grams of hydrogen can produce 133.80 grams of water when reacted with sufficient oxygen, following the stoichiometry of the balanced chemical equation 2H₂ + O₂ → 2H₂O.
Explanation:
The question asks how many grams of water can be produced from 15 grams of hydrogen according to the balanced chemical reaction: 2H₂(g) + O₂(g) → 2H₂O(l).
Using stoichiometry, we first determine the molar mass of hydrogen (H₂). Since there are 2 moles of hydrogen in the reaction and the molar mass of hydrogen (H) is approximately 1.01 g/mol, the molar mass of H₂ is 2.02 g/mol. This means 2 moles of H₂ weigh 4.04 g.
Therefore, 15 grams of hydrogen is equivalent to 15 g H₂ × (1 mol H₂ / 2.02 g H₂) = 7.426 moles of H₂.
According to the balanced equation, 2 moles of H₂ produce 2 moles of H₂O. So, 7.426 moles of H₂ would produce 7.426 moles of H₂O.
As the molar mass of H₂O is 18.02 g/mol, 7.426 moles of H₂O would weigh:
7.426 moles × 18.02 g/mol = 133.80 g of H₂O.
Thus, 15 grams of hydrogen can produce 133.80 grams of water, assuming there's sufficient oxygen available to react completely with the hydrogen.
I need help !!!!!!!!!!! Plz
1) How will increasing the surface area of one or more reactants affect the reaction rate of a system?
A It will change the products of the reaction.
B It will speed up the reaction.
C It will slow down the reaction.
D It will have no effect on the reaction.
2)Which change will usually speed the reaction rate of a chemical system?
A increase the concentration of a reactant
B decrease the temperature of the system
C decrease the pressure of a system
D increase the concentration a product
3) Some metals found in a car’s exhaust system speed up a chemical reaction but are not used up.
How do these metals work to speed up the reaction?
A They act as catalysts.
B They increase the pressure in the system.
C They increase the temperature of the system.
D They increase the concentration of reactants.
4) How does a catalyst affect the activation energy of a reaction?
A A catalyst increases the activation energy needed for a reaction.
B A catalyst does not affect the activation energy of a reaction.
C A catalyst decreases the activation energy needed for a reaction.
D A catalyst eliminates the need for activation energy.
5) Which theory explains the increase in reaction rate caused by raising the temperature or raising the pressure of a system?
A potential energy theory
B activation energy theory
C surface area theory
D collision theory
Answer:
all answers in image:
Explanation:
happy searching
The correct options are B, A, A, C and D.
What is reaction rate?The rate of reaction or reaction rate is the speed at which reactants are converted into products. When we talk about chemical reactions, it is a given fact that rate at which they occur varies by a great deal.
Some chemical reactions are nearly instantaneous, while others usually take some time to reach the final equilibrium.
Increasing the surface area of one or more reactants affect the reaction rate of a system will speed up the reaction.
increase the concentration of a reactant will usually speed the reaction rate of a chemical system
Some metals found in a car’s exhaust system speed up a chemical reaction but are not used up and they act as catalysts.
A catalyst decreases the activation energy needed for a reaction.
The theory explains the increase in reaction rate caused by raising the temperature or raising the pressure of a system is collision theory.
Therefore, The correct options are B, A, A, C and D.
Learn more about Reaction rate, here:
https://brainly.com/question/30546888
#SPJ3
As the number of effective collisions between reacting particles increases, the rate if a chemical reaction:
A- increases
B- decrease
C- remains the same
The rate of a chemical reaction increases as the number of effective collisions between reacting particles increases.
Explanation:The rate of a chemical reaction increases as the number of effective collisions between reacting particles increases. This is because an increase in the number of collisions leads to a greater chance of particles colliding with enough energy and the right orientation to react. As a result, the rate of the reaction increases.
A balloon contains helium gas expands from 230ml to 860 ml as more helium is added. What was the initial quantity of helium present if the expanded balloon contains 3.8x10^-4 mol, assuming constant temperature and pressure?
Answer:
n₁ = 1.0× 10⁻⁴ mol
Explanation:
Given data:
Initial volume of balloon = 230 mL
Initial number of moles of He =?
Final number of moles of He = 3.8 × 10⁻⁴ mol
Final volume of balloon = 860 mL
Solution:
The given problem will be solve through Avogadro law,
"Number of moles of gas and volume are directly proportional to each other at constant temperature and constant pressure"
Mathematical relationship:
V₁/n₁ = V₂/n₂
No we will put the values.
230 mL /n₁ = 860 mL/ 3.8 × 10⁻⁴ mol
n₁ = 230 mL× 3.8 × 10⁻⁴ mol/ 860 mL
n₁ = 874 × 10⁻⁴ mol. mL / 860 mL
n₁ = 1.0× 10⁻⁴ mol
Answer: the answer is n1=n2v1/v2
Explanation:
hope this helped
Describe the current model of the atom and the characteristics of each of the 3 subatomic particles. Be prepared to provide the number of protons, neutrons and electrons for a given element.
Answer:
The current model of the atom and the characteristics of each of the 3 subatomic particles are the electron cloud which contains 1 subatomic particle the electron which has negative charge and weights 1/2000 AMU the electron cloud surrounds the nucleus, the nucleus contains two subatomic particles the proton which has positive charge and weights one AMU and the neutron which has neutral/no charge and weights one AMU.
The pressure in an automobile tire filled with air is 245.0 kPa. If Po2 = 51.3 kPa, Pco2 = 0.10 kPa, and P-others = 2.3 kPa, what is Pn2?
Answer:
PN₂ = 191.3 Kpa
Explanation:
Given data:
Total pressure of tire = 245.0 Kpa
Partial pressure of PO₂ = 51.3 Kpa
Partial pressure of PCO₂ = 0.10 Kpa
Partial pressure of others = 2.3 Kpa
Partial pressure of PN₂ = ?
Solution:
According to Dalton law of partial pressure,
The total pressure inside container is equal to the sum of partial pressures of individual gases present in container.
Mathematical expression:
P(total) = P₁ + P₂ + P₃+ ............+Pₙ
Now we will solve this problem by using this law.
P(total) = PO₂ + PCO₂ + P(others)+ PN₂
245 Kpa = 51.3 Kpa + 0.10 Kpa + 2.3 Kpa + PN₂
245 Kpa = 53.7 Kpa+ PN₂
PN₂ = 245 Kpa - 53.7 Kpa
PN₂ = 191.3 Kpa
The partial pressure of nitrogen is determined to be 191.3 kPa.
The total pressure in the automobile tire is given as 245.0 kPa. To find the partial pressure of nitrogen (PN₂), we can use Dalton's Law of Partial Pressures, which states that the total pressure is the sum of the partial pressures of all gases present.
Here's the step-by-step calculation:
Total pressure (Ptotal) = 245.0 kPa Partial pressure of oxygen (PO₂) = 51.3 kPa Partial pressure of carbon dioxide (PCO₂) = 0.10 kPa Partial pressure of other gases (P-others) = 2.3 kPaUsing Dalton's Law:
Ptotal = PO₂ + PCO₂ + P-others + PN₂
Substituting the given values: 245.0 kPa = 51.3 kPa + 0.10 kPa + 2.3 kPa + PN₂
Rearranging to solve for PN₂:
PN₂ = 245.0 kPa - (51.3 kPa + 0.10 kPa + 2.3 kPa)
PN₂ = 245.0 kPa - 53.7 kPa
PN₂ = 191.3 kPa
Therefore, the partial pressure of nitrogen in the car tire is 191.3 kPa.
Urgent!!! Pls help me fill in this chart, topic is Acid Base Pairs. Will mark brainliest!!
Which of these is most similar to the Aztec political system?
O
A. A country makes laws to ensure that religion has a small role in
politics.
O
B. A group of priests create all policies related to religion in a
country
O
C. A king decides to declare war on a neighboring country without
the input of any advisers.
O
D. Men, but not women, in a country are allowed to vote for their
preferred leaders.
The Aztec political system most closely resembles a theocracy where religious leaders influence political decisions, making Option B the correct answer as it aligns with the role of priests in Aztec governance.
The Aztec political system was most similar to a theocratic form of government where religious leaders held significant power in the state's political structure. Comparing the options provided to the Aztec system:
Option A suggests an attempt to keep religion out of politics, which is not characteristic of the Aztec system.
Option B reflects a scenario where religious leaders create policies, aligning closely with the Aztec theocracy where priests and the emperor, who was also seen as a divine figure, had substantial influence.
Option C implies an autocratic rule by a king without advice, which is not similar to the Aztec system that had a ruling elite and a structure of nobility.
Option D discusses a gender-based voting system, which is unrelated to the theocratic nature of the Aztec political system.
Therefore, the correct answer is B, a group of priests create all policies related to religion in a country. This reflects the Aztec civilization where political decisions were often intertwined with religious beliefs and practices, and religious leaders played a central role in governance.
How would the images change for a weak acid solution of the same concentration?
Answer: Strong acids disassociate more compared to weak acids. Since there are more ions, due to more disassociation, there are more ions for electrons to flow through.
Explanation:
Images would show an increase in both the dissociated ions (H+ ions and anions) and the undissociated weak acid molecules in a concentrated solution of weak acid. However, the proportion between them remains unchanged, indicating the properties of a weak acid.
Explanation:In a solution of a weak acid, the acid does not fully dissociate, meaning not all of its molecules separate into hydrogen ions (H+) and anions. Instead, there is an equilibrium between the undissociated acid molecules and the ions. If the concentration of the weak acid solution was increased, the number of acid molecules, both dissociated and undissociated, would increase proportionally.
The images or visual representation of this would show an increase in both the dissociated ions (H+ ions and anions) and the undissociated weak acid molecules. However, the proportion between them would remain the same if no other factors are changed, showing the characteristics of a weak acid.
Learn more about Weak Acid here:https://brainly.com/question/34187282
#SPJ3
Octylphenol ethoxylate is a detergent that is commonly used in chemistry laboratories. It is a thick, yellowish liquid. A chemist dissolves a small amount of octylphenol ethoxylate in a liter of benzene, an organic liquid, then adds a small amount of toluene, another organic liquid. Identify each component of the solution as a solute or a solvent.
Benzene is a
a) solute.
b) solvent.
Toluene is a
a) solute.
b) solvent.
Octylphenol ethoxylate is a
a) solute.
b)solvent.
the answer on edge2020 is solvent, solute, solute
Answer:
1) Solvent
2) Solute
3) Solute
Explanation:
According to the concept of solubility, benzene is a solvent and toulene and octylphenol ethoxylate are solutes.
What is solubility?
Solubility is defined as the ability of a substance which is basically solute to form a solution with another substance. There is an extent to which a substance is soluble in a particular solvent. This is generally measured as the concentration of a solute present in a saturated solution.
The solubility mainly depends on the composition of solute and solvent ,its pH and presence of other dissolved substance. It is also dependent on temperature and pressure which is maintained.Concept of solubility is not valid for chemical reactions which are irreversible. The dependency of solubility on various factors is due to interactions between the particles, molecule or ions.
Learn more about solubility,here:
https://brainly.com/question/28170449
#SPJ3
Which of these is true about the mantle?
A. It is solid and does not move.
B. It moves quickly and unpredictable.
C. It moves in very slow currents.
D. It can suddenly cause huge fault lines.
Answer:
c.
Explanation:
it moves in slow convection currents, hope this helps!
The mantle moves in very slow currents, behaving like a non-Newtonian fluid, allowing the solid, yet plastically flowing rock to drive the motion of tectonic plates within the Earth's lithosphere.
The mantle of the Earth is characterized by its ability to move in very slow currents. This is due to the mantle behaving like a non-Newtonian fluid, similar to the material Silly Putty, which can deform under a slow, continuous stress. The mantle, although predominantly solid rock, flows plastically rather like a very viscous liquid, such as honey or corn syrup. The lithosphere, which includes the crust and the rigid uppermost part of the mantle, moves with the tectonic plates atop the slowly flowing asthenosphere. This process is integral to plate tectonics and influences the movement of the Earth's crust.
Among the choices provided, option C - It moves in very slow currents is the correct description regarding the mantle.
Air and water are both considered to be ____.
Answer:
Elements.
Explanation:
Modern Chemistry says these are elements.
Answer:
elements
Explanation:
ok, I need help with this one!!!!!!!!!!!!!!!!!!!! plz and thank you
Which statement is a correctly written thermochemical equation?
2C8H18 + 25O2 →16CO2 + 18H2O , ΔH = −5,471 kJ/mol
4Fe (s) + 3O2 (g)→2Fe2O3 (s) , ΔH = −3,926 kJ
NH4Cl → NH4+ + Cl–
C3H8 (g) + O2(g)→CO2 (g) + H2O (l), ΔH = −2,220 kJ/mol
The statement that should be rightly mentioned with respect to the equation of thermochemical is 4 Fe (s) + 3O2(g) -------> 2Fe2O3(s) ΔH = -3926 KJ
What is the thermochemical equation?It is a balanced of stoichiometric chemical equation that involved the change with respect to enthalpy, ΔH. Here the reactants and the product state should be considered as the liquid, solid, or in gaseous state.
Also, the value of the heat should be absorbed since ΔH < 0 so the reaction should be considered as the exothermic and ΔH > 0 then the reaction is endothermic.
Learn more about equation here: https://brainly.com/question/15591767?referrer=searchResults
The correct thermochemical equation is '4Fe (s) + 3O2 (g) → 2Fe2O3 (s), ΔH = −3,926 kJ', which includes the balanced chemical equation and the enthalpy change for the whole reaction.
Explanation:The question asks which statement is a correctly written thermochemical equation. A proper thermochemical equation includes the balanced chemical equation alongside the enthalpy change (ΔH) for the reaction. The enthalpy change represents the heat absorbed or released during the reaction when it occurs at constant pressure. There is only one correct thermochemical equation provided:
4Fe (s) + 3O2 (g) → 2Fe2O3 (s), ΔH = −3,926 kJ
This equation is balanced and represents the reaction of iron (Fe) with oxygen (O2) to form iron(III) oxide (Fe2O3). The enthalpy change is given for the entire reaction, not per mole, which is the correct way to represent it in a thermochemical equation. The other equations either do not include the enthalpy change in the correct units or are missing it entirely.
Excluding plasma, which state of matter has the most kinetic energy?
es )
Answer:
Gas
Explanation:
If one lightbulb burns out, but the other bulbs remain lit, the circuit must be a
a. Parallel Circuit
c. Triangle Circuit
b. Series Circuit
d. Circle Circuit
Answer:
Parallel Circuit
Explanation:
In a parallel circuit, there are multiple paths through which the current can flow, so the resistance of the overall circuit is lower than it would be if only one path was available.
If you have three moles of S2, how many moles of Al2S3 can be produced?
Answer:
2
Explanation:
S2x3=S6
Al2S3
S6/S3=2
What do these two changes have in common? snails growing shells rust forming on a bicycle frame Select all that apply.
A. Both are only physical changes.
B. Both are caused by heating.
C. Both are chemical changes.
D. Both are caused by cooling
Answer:
Im not completely sure about the answer, but A and C are Wrong
Explanation:
This is because the snail growing its shell is a physical change. For the shell of a snail to grow, the snail must consume Calcium to grow its shell. And would grow it just like how we grow our fingernails!
Rust forming on a bicycle frame is an example of a chemical change. This is caused by metal being exposed to oxygen. Just like when you leave your bike outside in the rain, it'll get rusty!
Both snails growing shells and rust forming on a bicycle frame are chemical changes. The former involves the secretion of calcium carbonate, while the latter is the formation of iron oxide due to the reaction of iron with oxygen.
Explanation:The two changes, snails growing shells and rust forming on a bicycle frame, have a common feature - they are both chemical changes.
Snails growing shells is a chemical change because the process of shell growth involves the secretion of calcium carbonate, a chemical process.
Similarly, when a bicycle frame rusts, it is also a chemical change. This is because rust, or iron oxide, forms when oxygen in the air reacts with the iron in the metal - this is a chemical reaction.
Hence option C is correct.
Learn more about chemical changes here:https://brainly.com/question/23693316
#SPJ3
Calculate the molarity of a solution, given that its volume is 820 mL and that it contains 7.4 g of ammonium chloride, NH,CI.
Answer:
The correct answer is 0.17 M
Explanation:
We have the following data:
V= 820 ml x 1 L/1000 ml = 0.82 L
m = 7.4 g
Ammonium chloride has the chemical formulae NH₄Cl. So, we calculate the molecular weight (MM) of NH₄Cl from the molar mass of N, H and Cl as follows:
MM NH₄Cl = 14 g/mol + (4 x 1 g/mol ) + 35.4 g/mol = 53.4 g/mol
Now we have to calculate the number of moles of NH₄Cl we have in the solution. For this, we divide the mass (m) into the molecular weight of NH₄Cl (MM):
moles NH₄Cl = m/MM = 7.4 g/53.4 g/mol = 0.138 moles
The molarity of the solution is the number of moles of NH₄Cl in 1 liter of solution. So, we have to divide the number of moles of NH₄Cl into the volume in liters as follows:
M = number of moles NH₄Cl/V = 0.138 moles/0.82 L = 0.169 mol/L ≅ 0.17 M
Answer:
Molarity= 0.169M
Explanation:
Applying n= CV
V=820ml= 0.82dm3
n= m/M = 7.4/53.5 = 0.138mol
0.138= C× 0.82
C= 0.169M
a balloon is filled with 3.60 L of H2 gas at STP. If the balloon is taken into the sea where the pressure is 2.50 atm and the temperature is 10.00c, what is the new volume of H2 gas in liter?
The new volume of [tex]H_2[/tex] gas is required.
The new volume of the required gas is 1.49 L.
Ideal gas laws[tex]P_1[/tex] = Initial pressure = 1 atm
[tex]P_2[/tex] = Final pressure = 2.50 atm
[tex]T_1[/tex] = Initial temperature = 273.15 K
[tex]T_2[/tex] = Final temperature = [tex]10.00^{\circ}\text{C}=10+273.15=283.15\ \text{K}[/tex]
[tex]V_1[/tex] = Initial volume = 3.60 L
[tex]V_2[/tex] = Final volume
From the ideal gas laws we have
[tex]\dfrac{P_1V_1}{T_1}=\dfrac{P_2V_2}{T_2}\\\Rightarrow V_2=\dfrac{P_1V_1T_2}{T_1P_2}\\\Rightarrow V_2=\dfrac{1\times 3.6\times 283.15}{273.15\times 2.5}\\\Rightarrow V_2=1.49\ \text{L}[/tex]
Learn more about ideal gas laws:
https://brainly.com/question/25290815
The new volume of H₂ gas in the balloon, taken to the sea where the pressure is 2.50 atm and the temperature is 10.00°C, is approximately 3.63 liters. This calculation is based on the ideal gas law using the initial conditions at STP.
To find the new volume of H₂ gas in the balloon when taken to the sea, we can use the ideal gas law, which relates the pressure (P), volume (V), temperature (T), and the number of moles (n) of a gas. The ideal gas law is represented as:
PV = nRT
Where:
P = Pressure (in atm)
V = Volume (in liters)
n = Number of moles
R = Universal gas constant (0.0821 L·atm/mol·K)
T = Temperature (in Kelvin)
First, let's calculate the number of moles of H₂ gas in the balloon at STP (Standard Temperature and Pressure):
Pressure at STP (P₁) = 1 atm
Temperature at STP (T₁) = 273.15 K (0°C + 273.15)
Using the ideal gas law:
P₁V₁ = nRT₁
1 atm × 3.60 L = n × 0.0821 L·atm/mol·K × 273.15 K
n ≈ 0.150 moles
Now, we can use the new conditions at the sea:
Pressure at the sea (P₂) = 2.50 atm
Temperature at the sea (T₂) = 10.00°C + 273.15 = 283.15 K
We want to find the new volume (V₂) of H₂ gas
P₂V₂ = nRT₂
Substituting the values:
(2.50 atm) × V₂ = (0.150 moles) × (0.0821 L·atm/mol·K) × (283.15 K)
Now, solve for V₂:
V₂ ≈ (0.150 moles × 0.0821 L·atm/mol·K × 283.15 K) / 2.50 atm
V₂ ≈ 3.63 L
So, the new volume of H₂ gas in the balloon when taken to the sea is approximately 3.63 liters.
For more such information on: ideal gas law
https://brainly.com/question/27870704
#SPJ3
An 8 N force is applied to a 2 kg object. What is the magnitude of the object's acceleration? A. 0.25 m/s² B. 4 m/s² C. 6 m/s² D. 16 m/s²
Answer: 4m/s2 (B)
Explanation:
Force = mass × acceleration
Force given is 8N
Mass=2kg
Acceleration =?
Substitute into the formula
F=ma
8=2a
A=8/2
A=4m/s2
Acceleration used is 4m/s2 (B)
Answer:
b
Explanation:
If 0.214 mol of argon gas occupies a volume of 343.4 mL at a particular temperature and pressure, what volume would 0.375 mol of argon gas occupy under the same conditions?
Answer in - ATM
Answer:
601.8 mL
Explanation:
For an ideal gas kept at constant temperature and pressure, the number of moles of the gas is directly proportional to the volume of the gas:
[tex]n\propto V[/tex]
where
n is the number of moles
V is the volume of the gas
Therefore, for a gas undergoing a transformation at constant temperature and pressure, we can write:
[tex]\frac{V_1}{n_1}=\frac{V_2}{n_2}[/tex]
where here we have:
[tex]V_1=343.4 mL[/tex] is the initial volume of the gas
[tex]n_1=0.214 mol[/tex] is the initial number of moles
[tex]n_2=0.375 mol[/tex] is the final number of moles
Solving for V2, we find the final volume of the gas:
[tex]V_2=\frac{n_2 V_1}{n_1}=\frac{(0.375)(343.4)}{0.214}=601.8 mL[/tex]
The volume would 0.375 mol of argon gas occupy under the same conditions will be "601.8 mL".
Pressure and TemperatureAccording to the question,
Gas initial volume, V₁ = 343.4 mL
Initial no. of moles, n₁ = 0.214 mol
Final no. of moles, n₂ = 0.375 mol
We know that,
Moles of gas ∝ Volume of gas
or,
n ∝ V
and, the relation will be:
→ [tex]\frac{V_1}{n_1} = \frac{V_2}{n_2}[/tex]
then,
The final volume be:
→ V₂ = [tex]\frac{n_2 V_1}{n_1}[/tex]
By substituting the values, we get
= [tex]\frac{0.375\times 343.4}{0.214}[/tex]
= [tex]\frac{128.775}{0.214}[/tex]
= 601.8 mL
Thus the above answer is correct.
Find out more information about volume here:
https://brainly.com/question/25290815
Researchers have developed cars which navigate and steer themselves. Aside from cost, what is most likely the main factor keeping these systems from being placed on all new cars?
A) Production facilities
B) Time constraints
C) Driver confusion
D) Technological issues
Answer:
A
Explanation:because since not all of them hove the sa
me program the pro duction is slow
true or false: an apple looks red because it absorbs red light?
Answer:
Explanation:
True
What type of reaction is Ca+HCl, CaCl+H2
Reaction of
Ca + HCl => CaCl + H2
Is a single displacement reaction.
The reaction between calcium (Ca) and hydrochloric acid (HCl) to form calcium chloride (CaCl2) and hydrogen gas (H2) is a single displacement reaction. It exemplifies a metal element reacting with an acidic compound to displace hydrogen and form a salt and hydrogen gas.
Explanation:When calcium (Ca) reacts with hydrochloric acid (HCl), a single displacement reaction occurs where calcium replaces hydrogen in hydrochloric acid to form calcium chloride (CaCl2) and hydrogen gas (H2). This type of chemical reaction where an element reacts with a compound and displaces another element from it is known as a single displacement reaction or substitution reaction. In this case, the balanced reaction would be Ca + 2HCl → CaCl2 + H2.
Related Information:
The reaction of calcium carbonate (CaCO3) with hydrochloric acid to produce calcium chloride, carbon dioxide (CO2), and water (H2O) is an example of a double displacement reaction, also known as a metathesis reaction. Here, two compounds exchange ions to form two new compounds. This reaction is represented by 2 HCl(aq) + CaCO3(aq) → CaCl2(aq) + CO2(g) + H2O(l).
1. Determine the final volume of a 1.5 M HCl solution prepared from 20.0 mL
of a 6.0 M HCl solution.
Explanation:
Because molarity is classified as moles of solute per liter of water, dilution of the water may result in a reduction of its concentration.
Therefore, because the amount of moles of solute has to be constant for dilution, you will use the molarity and volume of that same target solution to calculate how many moles of solute will be present in the sample of the stock solution that you dilute.
c = [tex]\frac{n}{v}[/tex]
⇒ n = c ⋅ V
[tex]n_{HCL}[/tex] = 0.250 M ⋅ 6.00 L = 1.5 moles HCl
Now all you have to do is figure out what volume of 6.0 M stock solution will contain 1.5 moles of hydrochloric acid
c = [tex]\frac{n}{v}[/tex]
V = [tex]\frac{n}{c}[/tex]
[tex]V_{Stock}[/tex] = [tex]\frac{1.5 moles}{6.0 \frac{moles}{L} }[/tex] = 0.25 L
Expressed in milliliters, the answer will be
[tex]V_{Stock} = 250ML[/tex] → rounded to two sig figs
Which feature is most likely found at a divergent boundary?
Answer:
Fault-block mountain
In geography, fault-block mountains arise when the Earth's crust pulls apart and divides. Some parts of the Earth are pushed upwards whereas the other moves downward forming a divergent boundary. In geological studies, a divergent boundary can be described as a linear feature which arises due to plate tectonics which are being pulled apart from each other. Hence, fault-block mountains are most likely to be seen in a divergent boundary.
Most active divergent plate boundaries occur between oceanic plates and exist as mid-oceanic ridges. Divergent boundaries also form volcanic islands, which occur when the plates move apart to produce gaps that molten lava rises to fill.
Fault-block mountain
A diverging border is a linear structure that occurs as plate tectonics draw apart from each other in geological investigations.Fault-block mountains form as the Earth's crust separates and pulls away.As a result, fault-block mountains are most likely to appear at a divergent boundary.Fault-block mountain is most likely found at a divergent boundaryFor more information:
https://brainly.com/question/20909689?referrer=searchResults
A sample of dry gas weighing 2.1025 g is found to occupy 2.850 L at 22.0oC and 740.0 mm Hg. How many moles of gas are present?
0.11 moles of the gas are present in the sample of dry gas.
Explanation:
Data given:
mass of the gas = 2.1025 grams
volume of the gas = 2.850 litres
temperature = 22 degrees (273.15+22) = 295.15 K
Pressure = 740 mm Hg or 0.973 atm
moles of the gas =?
R = 0.08206 atmL/Mole K
From the ideal gas law the number of moles can be calculated in the sample of dry gas. Number of moles will be determined by the pressure exerted, volume and temperature of the gas.
The formula:
PV = nRT
n = [tex]\frac{PV}{RT}[/tex]
putting the values in the above equation:
n = [tex]\frac{2.850 x 0.973}{0.08206 X 295.15}[/tex]
= 0.11 moles
0.11 moles of the dry gas is present in the sample given.
When, a sample of dry gas weighing 2.1025 g is found to occupy 2.850 L at 22.0oC and 740.0 mm Hg. Then, total 0.0994 moles of gas are present.
First, we convert the temperature to Kelvin (T(K) = T(C) + 273.15) which is 22.0 + 273.15 = 295.15 K. Next, we convert pressure from mm Hg to atm by dividing by 760, as 1 atm = 760 mm Hg:
Pressure in atm = 740.0 mm Hg / 760 mm Hg/atm = 0.9737 atm.
Now we must solve for n, the number of moles of gas:
PV = nRT(0.9737 atm) x (2.850 L) = n x (0.0821 L atm / mol K) x (295.15 K) n = (0.9737 atm x 2.850 L) / (0.0821 L atm / mol K x 295.15 K) n = 0.0994 molesThe number of moles of gas present is therefore 0.0994 moles.