the answer would be D
Answer:
D. billions of stars arranged in the circular pattern with a flattened core
Explanation:
Typical fears in children include the fear of A. failure. B. heights. C. jumping. D. the dark.
if you conduct an expiriment that uses lots of paper and plastic how can you practice good science ethics ?
A 0.70 kg teddy bear is nudged off a window sill and falls 3.35 m to the ground. what is its kinetic energy at the instant it hits the ground?
Final answer:
The kinetic energy of the teddy bear at the point of impact is calculated using the conservation of energy principle, which yields 22.883 Joules.
Explanation:
The question asks for the kinetic energy of a 0.70 kg teddy bear at the instant it hits the ground after falling from a window sill 3.35 m high. To solve this, we can use the principle of conservation of energy, specifically that the potential energy of the teddy bear at the height from which it is dropped is fully converted into kinetic energy at the moment it hits the ground.
The formula for kinetic energy (KE) is KE = 1/2 m v^2, where m is mass and v is velocity.
However, since the velocity at the moment of impact is not directly provided, we use the gravitational potential energy formula :
PE = mgh, where g is the acceleration due to gravity 9.8 m/s2 and h is the height to find the energy involved.
Because PE at the height is equal to KE at the ground, KE = mgh. Substituting the given values: KE = 0.70 kg * 9.8 m/s2 * 3.35 m.
Thus, the kinetic energy at the instant the teddy bear hits the ground is 22.883 J (Joules).
Determine the sign (+ or −) of the torque about the elbow caused by the biceps, τbiceps, the sign of the weight of the forearm, τforearm, and the sign of the weight of the ball, τball. express your answers as using + and - separated by commas.
what was perphaps the greatest challenge of human space flight?
A diver who is 10.0 meters underwater experience has a pressure of 202 kPa. If the diver’s surface area is 1.50 meters squared, with how much total force does the water push on the diver?
To determine the total force exerted on the diver, multiply the pressure (in pascals) by the surface area. The total force is 303,000 newtons.
Explanation:To calculate the total force exerted by the water on a diver who is 10.0 meters underwater, we need to apply the concept of pressure which is defined as force per unit area. Given the pressure experienced by the diver is 202 kPa and the diver's surface area is 1.50 meters squared, we can use the formula Force = Pressure × Area.
First, we need to convert the pressure from kilopascals to pascals since one kilopascal equals 1,000 pascals:
202 kPa × 1,000 = 202,000 Pa
Then, we multiply the pressure by the diver's surface area to find the total force:
Total Force = 202,000 Pa × 1.50 m² = 303,000 N
Therefore, the water pushes on the diver with a total force of 303,000 newtons.
Which graphic design tools help you draw circles and rectangles?
Freehand tool
Geometric Shape tools
Vector Splines
Drawing tool
Geometric shape tools help you draw circles and rectangles. Option B is correct.
What is graphic design?Graphic design is the practice of using words, pictures, and other visual elements to communicate ideas to an audience, often in order to achieve a certain result.
In other words, graphic design serves as a tool for communicating ideas through imagery and design.
For those with imaginative thinking skills who appreciate art, technology, and communication, graphic design is a terrific job.
Every business has a need for design, therefore graphic designers have a lot of opportunities to work on a variety of brand-new, fascinating projects.
You can draw circles and rectangles using geometric form tools.
Hence, option B is correct.
To learn more about graphic design refer;
https://brainly.com/question/10678312
#SPJ2
The national grid supplied a house with 18000000 J of energy in 1 hour. What was the average current supplied to the house in that hour? Write any equations that you use.
The average current supplied to the house in one hour can be found by dividing the energy supplied by the voltage. In this case, the average current is 5 Amperes.
Explanation:To find the average current supplied to the house, we can use the equation: I = Q / t, where I is the current, Q is the charge, and t is the time. In this case, the energy supplied is 18,000,000 J, so we can find the charge using the equation: Q = E / V, where E is the energy and V is the voltage. Given that the time is 1 hour, we can calculate the average current using the equation: I = Q / t.
First, we need to convert the energy from joules to kilowatt-hours: 1 kWh = 3,600,000 J. So, the energy supplied to the house is 5 kWh.
The average current can now be calculated as follows: I = E / V = 5 kWh / 1 hour = 5 A. Therefore, the average current supplied to the house in that hour is 5 Amperes.
Learn more about Electric Current here:https://brainly.com/question/2264542
#SPJ2
You are riding your bike to the mall. You travel the first mile in 10 minutes. The last mile takes you 15 minutes. This is an example of
Answer:
negative exccalarion
Explanation:
A transformer changes the 10,000 v power line to 120 v. if the primary coil contains 750 turns, how many turns are on the secondary?
Convection currents occur in fluids because of temperature and______ differences. Convection currents transfer ______ energy throughout a fluid. They continue until all of the fluid is at the same temperature
Solution: (i) Density (ii) thermal
Liquids at lower temperatures have greater density when compared to liquids at higher temperatures.This is because, at higher temperatures, molecules have greater kinetic energy and hence they are spaced farther apart, when compared to molecules at lower temperatures. Thus, the colder layers of liquids are heavier than the warmer layers, which causes then to move down due to gravity. For the same reason, the hotter layers move upwards through the liquid.
When a liquid is heated, the molecules closest to the heat source have greater energy, their density becomes less and they move upwards. The colder layers sink downwards. The layers of the liquid which were cold initially, get heated and they travel upwards. As the process repeats, convection currents are set up in the liquid.
These currents transfer the thermal energy derived from the source throughout the liquid. The process stops when the entire liquid is at the same temperature.
Thus, convection currents occur in liquids due to temperature and density differences. Convection currents transfer thermal energy throughout a fluid.
Convection currents occur in fluids because of temperature and density differences. Convection currents transfer thermal energy throughout a fluid. They continue until all of the fluid is at the same temperature.
What is the relation between kinetic energy and density?As we know about the relationship between kinetic energy and density. Density is inversely proportional to the temperature while the temperature is directly proportional to kinetic energy showing that kinetic energy is inversely proportional to density.
This is because, at higher temperatures, molecules have greater kinetic energy and the colder layer has less density than the hotter layer due to the density difference under the influence of density the colder layer moves downward resulting in the setup of convective heat transfer.
Due to the movement of molecules and its process repetition and temperature difference convective current transfer takes place and it will continue until the equilibrium process is not achieved.
Hence it shows the relationship between temperature and density. density is inversely proportional to the temperature.
To learn more about convective heat transfer refer to the link
https://brainly.com/question/276731
the potential energy of an apple is 6.00 joules. the apple is 3.00 meters high. what is the mass of the apple?
By rearranging the formula for gravitational potential energy, we calculate that the mass of the apple is approximately 0.2041 kg when its potential energy is 6.00 joules at a height of 3.00 meters.
To calculate the mass of the apple using its potential energy (PE) and the height (h) at which it is located, we use the formula for gravitational potential energy:
PE = mgh
where:
m is the mass in kilograms,g is the acceleration due to gravity (9.8 m/s² on Earth), andh is the height in meters.Given that PE = 6.00 Joules and h = 3.00 meters, we rearrange the formula to solve for m:
m = PE / (gh)
Substituting in the known values:
m = 6.00 J / (9.8 m/s² * 3.00 m) = 0.2041 kg
Therefore, the mass of the apple is approximately 0.2041 kg.
Calculate the average translational kinetic energy (sometimes just called average kinetic energy)⦠for one mole of gas at 827 k. and... for a single gas molecule at 827 k.
The average translational kinetic energy, or thermal energy, of a molecule can be found using the equation KE = 3/2kT. For one mole of gas at 827K, you multiply the single particle kinetic energy by Avogadro's number. For a single gas molecule at 827K, add its temperature into the equation to find its kinetic energy.
Explanation:The average translational kinetic energy of a molecule, also known as thermal energy, can be calculated using the equation KE = 3/2kT, where 'k' is the Boltzmann's constant (1.38 x 10^-23 J/K), 'T' is the absolute temperature in Kelvin, and KE is the average kinetic energy.
Now to calculate for one mole of gas at 827 K, multiply the single particle kinetic energy by Avogadro's number since one mole consists of Avogadro's number of particles. Hence, KE of one mole= NA * KE of one particle = 6.022 x 10^23 * KE of one particle. This answers the first part of your question.
In the case of a single gas molecule, using the temperature of 827 K, substitute this into the equation KE = 3/2kT to find the kinetic energy for an individual molecule. Remember the unit for your answer is Joules. This addresses the second part of your question.
Learn more about Average Translational Kinetic Energy here:https://brainly.com/question/33720533
#SPJ5
Rocket engineers use newton's third law during launch. identify the action force.
A. exhaust gases push down on the earth
B. rocket travels upward
C. earth pushes back on the exhaust gases
The action force in this scenario is earth pushes back on the exhaust gases.
Explanation:The action force in this scenario is option C: earth pushes back on the exhaust gases.
Newton's third law states that for every action, there is an equal and opposite reaction. In this case, the action force is the exhaust gases pushing downward on the earth as the rocket launches. The reaction force is the earth pushing back on the exhaust gases with an equal force in the opposite direction.
So, while the rocket is traveling upward, the action force is the exhaust gases pushing downward on the earth and the reaction force is the earth pushing back on the exhaust gases.
Learn more about Newton's third law here:https://brainly.com/question/2057822
#SPJ6
The standard unit of work in the metric system is named after the scientist _____. 1 Albert Einstein 2 James Joule 3 Isaac Newton 4 James Watt
the applied force required to push something across a surface as friction increases is what?
Which statements describe chemical changes? Check all that apply.
The after-rain smell is produced by an interaction between rain and the oils released by plants.
A homemade volcano can be created by combining baking soda and vinegar. When it erupts, carbon dioxide gas is released.
Sheep are sheared for their wool. The wool is cleaned and twisted into yarn. The yarn is dyed and used to knit clothing.
The Statue of Liberty has turned green over time due to the reaction of copper with carbon dioxide and water.
Mosaic art is created by smashing colored glass tiles and rearranging them to form a picture or design.
The answers are a,b and d
Answer: A, B, and D
a rectangular garden has a perimeter of 54 feet. it's length is 3 less than twice its width. write and solve an equation to solve for the gardens dimensions
What does 34.9cL equal in hL
What is the main reason why many nuclear power plants are located near bodies of water?
A two-phase, liquid–vapor mixture of h2o, initially at x 5 30% and a pressure of 100 kpa, is contained in a piston– cylinder assembly, as shown in fig p3.77. the mass of the piston is 10 kg, and its diameter is 15 cm. the pressure of the surroundings is 100 kpa. as the water is heated, the pressure inside the cylinder remains constant until the piston hits the stops. heat transfer to the water continues at constant volume until the pressure is 150 kpa. friction between the piston and the cylinder wall and kinetic and potential energy effects are negligible. for the overall process of the water, determine the work and heat transfer, each in kj.
Final answer:
In this scenario, the work done by the external agent can be calculated using the change in volume, and no heat is exchanged during this process.
Explanation:
Work: In the given scenario, since the gas volume doubles at constant temperature, the work done by the external agent can be calculated using the formula W = -PΔV, where P is the pressure and ΔV is the change in volume.
Heat Transfer: As the gas volume doubles at constant temperature, no heat is exchanged during this process. Hence, the heat exchanged is zero.
The current in a hair dryer measures 15 amps. The resistance of the hair dryer is 14 ohms. What is the voltage?
i'm pretty terrible at math, if you could explain how to found the correct answer to help future problems i would greatly appreciate it!
Using Figure 25-2, determine how Giant stars differ from main sequence stars.
Answer:
Giant stars differ from main sequence stars in having greater absolute magnitudes for the same temperatures.
A satellite of mass 6500 kg orbits the earth in a circular orbit of radius of 7.5 106 m (this is above the earth's atmosphere).the mass of the earth is 6.0 1024 kg. what is the speed of the satellite?
The two forces, centripetal force and gravity are
equal
So, G M m / r^2 = (m V^2) / r
so sqrt (GM/r)= V
G is a gravitational constant which is G=6,67.10exp(-11)
Sqrt (6.67 x 10^-11) (6 x 10^24)/7.5 x 10^6
so V= 7.30479295e9 or 7305 m/s
Final answer:
To find the speed of a satellite in Earth orbit, we use the formula for orbital speed with the Earth's mass and the orbit's radius. After calculation, the satellite's speed is found to be approximately 7357.7 m/s.
Explanation:
The question asks for the speed of a satellite of mass 6500 kg orbiting the Earth in a circular orbit with a radius of 7.5 × 106 m. The mass of the Earth is given as 6.0 × 1024 kg. To find the speed of the satellite, we use the formula for the orbital speed:
v = √(GM/r)
where v is the orbital speed, G is the gravitational constant (6.674 × 10−12 Nm2/kg2), M is the mass of the Earth, and r is the radius of the orbit. Plugging in the given values:
v = √((6.674 × 10−12 × 6.0 × 1024) / 7.5 × 106)
After performing the calculation, we find that the speed of the satellite is approximately 7357.7 m/s.
A lunar exploration vehicle was created by a research team. It weighs 3,000 kg on the earth. It needs an acceleration of 10 m/s2 on the moon. In order to have the same acceleration, what will be the net force acting on the vehicle on the earth?
describe the difference between mechanical and electromagnetic waves. Give an example of each kind of wave related to telecommunications.
Which word equation is used to calculate the acceleration of an object? A. Subtract the initial velocity from the final velocity and multiply the result by the time. B. Subtract the initial velocity from the final velocity and divide the result by the time. C. Add the initial velocity and the final velocity and divide the result by the time. D. Add the initial velocity and the final velocity and multiply the result by the time.
Final answer:
The correct word equation to calculate the acceleration of an object is to subtract the initial velocity from the final velocity and then divide the result by the time.
Explanation:
To calculate the acceleration of an object, you would use the following word equation: Subtract the initial velocity from the final velocity and divide the result by the time. This represents the average acceleration, where acceleration is defined as the change in velocity (∆v) divided by the change in time (∆t).
It is crucial to ensure that all units are consistent, typically using meters for distance and seconds for time. An example of calculating acceleration would be: If an object's initial velocity is 5 m/s, its final velocity is 20 m/s, and the time taken to change velocity is 3 seconds, the acceleration a is (20 - 5) / 3 = 15 / 3 = 5 .
3. If you send a sound wave of the same wavelength (λ = 2.00 m) through air, helium, and carbon dioxide, describe how the pitch of the sound will compare through each medium. Use calculations and your data to explain
Answer:
F = v / w
Air: 343m/s / 2.0 m = 171.5/s
Helium: 1007m/s / 2.0 m = 503.5/s
Carbon Dioxide: 267m/s / 2.0 m = 133.5 /s
Explanation:
A torque applied to a flywheel causes it to accelerate uniformly from a speed of 161 rev/min to a speed of 853 rev/min in 5.0 seconds. determine the number of revolutions n through which the wheel turns during this interval. (suggestion: use revolutions and minutes for units in your calculations.)
A circular loop of wire with a radius of 4.0 cm is in a uniform magnetic field of magnitude 0.069 t. the plane of the loop is perpendicular to the direction of the magnetic field. in a time interval of 0.46 s, the magnetic field changes to the opposite direction with a magnitude of 0.044 t. what is the magnitude of the average emf induced in the loop?