What is a possible quantum number set for an electron in the 2s orbital of a beryllium (Be) atom?

The number of particles  that  are in 12.7  moles of  compound that Jessica had is     7.65 x10^24 particles  of compound ( answer E)

    Calculation

The number  of particles are calculated  using the Avogadro's Principle  constant.

             what about 12.7 moles  of  compound=   ?  particles\

   by use of  cross multiplication

 N.b moles and moles cancels each  other

Answer:

76.5 x 10^24

Explanation:

This is correct :)

Jupiter, I believe?

The distance between Jupiter, which is 778.6 million kilometers, and the Sun is approximately 5.2 Astronomical Units (AU). An AU, or the average distance from Earth to the Sun, is approximately 149.6 million kilometers.

The planet whose distance from the Sun is approximately 778,600,000 km is Jupiter. Consider that 1 Astronomical Unit (AU) - the average distance from the Earth to the Sun - is about 149,597,870,700 meters or 149.6 million kilometers. So, when we compare this to the distance of Jupiter, we find it's around 5.2 AU from the Sun. Jupiter, being the largest planet in our solar system and located beyond the asteroid belt, is indeed far from the sun. However, this increases its year length, experiencing longer periods between each full orbit of the Sun.

https://brainly.com/question/31760106

#SPJ2

A sulfur atom has two unpaired electrons. Stable electron configurations are those where all electron shells or subshells are filled.

A sulfur atom, which has an atomic number of 16, has 16 electrons. The electron configuration for sulfur is 1s2 2s2 2p6 3s2 3p4. This shows that there are two electrons in the 1s subshell, two in the 2s, six in the 2p, two in the 3s, and four in the 3p. Unpaired electrons are those which occupy an atomic or molecular orbital by themselves, not forming a pair with another electron. In the case of sulfur, all the electrons in 1s, 2s, 2p, and 3s shells are paired. But in the 3p shell, there are four electrons, meaning two of them are unpaired electrons.

The phrase 'stable electron configurations are likely to contain' refers to atoms with fully filled electron shells or subshells. Atoms strive for a stable configuration, which typically means having full outer electron shells. This is the reason that noble gases are unreactive, as they have completely filled shells.

https://brainly.com/question/29157546

#SPJ6

While scalar quantities only include the magnitude, vector quantities include both the magnitude and the direction. Displacement is an example of vector quantities. Therefore, it includes magnitude and direction

mark brailiest please

Answer:

It signifies both magnitude and direction

Explanation:

A vector is a quantity which has both magnitude and direction.

A displacement is vector quantity whose length is shortest distance from initial to final position of a point. Displacement quantifies both distance and direction of imaginary motion along the straight line from initial position to final position.

If I am correct it should be nucleons

The collection of protons and neutrons in the center of the atom is called the nucleus.

One is the plum pudding theory by Thomsons that theorized that positive and negative charges were randomly distributed in an atom. This was later discovered that the positive charge was located at the small nucleus center of the atoms and negative electrons  on the outside.

Another is the aspect in Bohr model theory that electron orbit the nucleus like planets orbit the sun.  Quantum mechanisms have come to disprove this and identify that electron orbit can only be predicted by probabilities and not in the certainty of their position around the nucleus of the atom. They randomly skip and hop (disappear and reappear) at positions around the nucleus.

Given,  half life of a certain radioactive element = 800 years.

Amount of substance remaining at time t = 12.5%

Lets consider the initial amount of the radioactive substance  = 100%

Using the half life equation:

A = A₀(1/2)^t/t₁/₂

where A₀ is the amount of radioactive substance at time zero and A is the amount of radioactive substance at time t, and t₁/₂ is the half-life of the radioactive substance.

Plugging the given data into the half life equation we have,

12.5 = 100 . (1/2)^t/800

12.5/100 = (1/2)^t/800

0.125 = (0.5)^t/800

(0.5)^3 = (0.5)^t/800

3 = t/800

t = 2400 years

Thus the object is 2400 years  old.

The age of the object can be calculated using the given half-life and the percentage of remaining atoms which is 2888.8 years

The half-life of a radioactive element is the time it takes for half of its radioactive atoms to decay, transforming into a stable form. It's a fundamental concept in nuclear physics and radiometric dating, used to estimate the age of rocks and archaeological artifacts. The half-life of a radioactive element is the time it takes for half of its nuclei to decay. If only 12.5% of the radioactive atoms remain, it means that 87.5% of the atoms have decayed. Using the given half-life of 800 years, we can calculate the age of the object by finding the number of half-lives it would take for 87.5% decay:

Age of half-lives = log2(87.5%) ≈ 3.61

Age of the object = 3.61 x 800 years = 2888.8 years

https://brainly.com/question/1770619

#SPJ3

conduction:   Conduction is how heat transfers through direct contact with objects that are touching.

B a neutron because it is neutral

A cubic centimeter (cm³) is a unit used to measure volume. It is the volume of a cube with an edge length of exactly one centimeter.

A cubic centimeter (cm³) is a unit used to measure volume. It is the volume of a cube with an edge length of exactly one centimeter. One cubic centimeter is equivalent to one milliliter (mL) and is 1/1000 of a liter.

https://brainly.com/question/31946306

#SPJ2

Answer- A

Explanation- Because you have to look at the symbols and remember which symbol goes with each chemical, if you don't then you could get confused.

A. Aluminum oxide. The correct name for the chemical formula Al2O3 is Aluminum oxide, which indicates that the compound is composed of two atoms of aluminum and three atoms of oxygen.

The correct name for the chemical formula Al2O3 is incorrectly named in options B and C. The prefix 'di-' in option D refers to having two of something, but the 'di-' prefix is not typically used in this context with ionic compounds. Therefore, the correct name for this chemical compound is Aluminum oxide (option A), reflecting that it contains two atoms of aluminum and three atoms of oxygen.

https://brainly.com/question/36634852

#SPJ3

The equilibrium means that amount that are coming equals the amount that are going.

So the correct answers are

2. A person's income and expenses are equal every month.

3. The pressure exerted on the inside of a balloon by the gas inside is equal to the pressure exerted on the outside of the balloon by the atmosphere.

-Hiadamcom/From Agarvated

Answer:

A person's income and expenses are equal every month.

The pressure exerted on the inside of a balloon by the gas inside is equal to the pressure exerted on the outside of the balloon by the atmosphere.

Explanation:

In equilibrium there is balance always.  

Option A is incorrect. Equilibrium would be maintained if the water that falls out of the faucet is re-entered into the faucet.  

Option B is correct. As the income and expense of the person is equal, so what the person spends is equal to what he earns. So the person neither spends more than his income goes to debt nor does the person has some money left after his spending to save or invest.  

Option C is correct. As the pressure exerted on the inside of a balloon by the gas inside is equal to the pressure exerted on the outside of the balloon by the atmosphere, the balloon does not burst. The air pressure is balanced on either side of the balloon.  

Option D is incorrect. Equilibrium would be maintained if the heat gained is equal to the heat lost.  

The compound is S₂O₂ or disulfur dioxide.

S₂O₂ contains two atoms of sulfur and two atoms of oxygen.

It is also known as the dimer of  sulfur monoxide, SO.

Both sulfur and oxygen are nonmetals. So when naming nonmetals we put a prefix before them. 'di' means 2. Since there are two atoms of each element of  sulfur and oxygen, we name S₂O₂ as disulfur dioxide.

Answer:

The compound is S₂O₂ or disulfur dioxide.

Explanation:

The four basic needs of all living organisms are air (for respiration), water (a major component of living cells), food/nutrients (to supply energy and materials for growth and repair), and shelter/habitat (for protection from environment and predators).

All living organisms, irrespective of their size or complexity, have four basic needs for survival and proper functioning. These four needs include:

https://brainly.com/question/31910532

#SPJ6

pretty sure its c 95% sure

The correct answer is A. The solution is acidic in nature.

According to standard PH scale ranges;

So in this solution PH of solution is 8. According to standard criteria unknown solution is acidic in nature.

Answer:

A

Explanation:

i did it on a USA test prep :)

It would be Calcium: Ca

We can tell which atom has 20 electrons by looking on the periodic table. If we look at number 20 (the atomic number shows how many electrons and protons an atom has) it is Calcium (symbol Ca).

Blue is the color that can be best absorbed, as orange is the color seen.

Erosion caused the grand canyon to form

This would be either chemical weathering or erosion.

See, the rock was broken down and cracked by any sort of weathering or erosion. It could've been caused by either one of those, honestly.

Have a great day :)

Answer:

Number of protons + neutrons

ANSWER C

The answer is B, protein.

Answer: Option B) is the correct answer.

Explanation:

A polymer is defined as a molecule which has 'n' number of monomer units.

For example, [tex](CH_{2}=CH_{2})_{n}[/tex] is a poly ethene polymer.

Similarly, proteins are also polymers as they are made up of amino acids and contain number of repeated units just like polymers.

Thus, we can conclude that protein is made of polymers.

The formula is density = mass / Volume

density = 1.7 g/mL

mass = 95 grams

Volume = ?

1.7 g/mL = 95 g / Volume

Volume = 95 g / 1.7 g/mL

Volume = 55.88 mL

Hope this help!

i am pretty sure it is 4

It has a single valence electron.

3pro & 3ele - it is the single electron in shell 2.

Li has 1 valence electron

Final answer:

The mass of water produced from the reaction of 3.03 g of butane with excess oxygen is approximately 4.69 grams.

Explanation:

To calculate the mass of water (H₂O) produced from the reaction of butane (C₄H₁₀) with excess oxygen (O₂), we need to use the balanced chemical equation for the combustion of butane:

C₄H₁₀(g) + 6O₂(g) → 4CO₂(g) + 5H₂O(l)

From the balanced equation, we can see that 1 mole of butane produces 5 moles of water. First, we'll need to calculate the number of moles of butane we have:

Butane has a molar mass of 58.12 g/mol (44.10 for carbon + 14.02 for hydrogen), so:

Moles of butane = 3.03 g / 58.12 g/mol ≈ 0.0521 mol

Since 1 mole of butane produces 5 moles of water, the moles of water produced will be:

Moles of H₂O = 0.0521 mol butane x 5 moles H₂O/mol butane = 0.2605 mol H₂O

Finally, we calculate the mass of water produced using the molar mass of water, which is approximately 18.02 g/mol:

Mass of H₂O = 0.2605 mol x 18.02 g/mol ≈ 4.69 g

Therefore, the mass of water produced is about 4.69 g.

The balanced decomposition reaction of Potassium chlorate is 2KClO3 —-> 2KCl + 3O2, where the coefficient in front of KCl is 2. Answer to the question is (b) 2.

When balancing the decomposition reaction of Potassium chlorate (KClO3) to form Potassium chloride (KCl) and Oxygen (O2), you will aim to have the same number of atoms of each element on both sides of the equation. The balanced chemical equation for this reaction is:

2KClO3 —-> 2KCl + 3O2

According to the balanced equation, the correct coefficient in front of KCl is 2. Therefore, the answer to the question is (b) 2.

Final answer:

The density of the liquid is found by dividing its mass, 0.115 grams, by its volume, 0.265 milliliters, resulting in a density of 0.434 g/mL.

Explanation:

To calculate the density of a liquid, we divide its mass by its volume. In the case of the liquid with a mass of 0.115 grams and a volume of 0.000265 liters, we first convert liters to milliliters (since the density is asked for in g/mL), knowing that 1 L = 1000 mL. Therefore, the volume in milliliters is 0.000265 L × 1000 mL/L = 0.265 mL.

Now we can calculate the density using the formula: Density = Mass/Volume. Substituting the given values: Density = 0.115 g / 0.265 mL = 0.434 g/mL.

Answer:- work = 319 J

Solution:- The volume of the gas decreases from 5.35 L to 1.55 L.

[tex]\Delta V=1.55L-5.35L[/tex]  = -3.80 L

external pressure is given as 0.829 atm.

[tex]w=-P_e_x_t\Delta V[/tex]

where w is representing work.

Let's plug in the values and calculate pressure-volume work:

[tex]w=-0.829atm(-3.80L)[/tex]

w = 3.15 atm.L

We need to convert atm.L to J.

1 atm.L = 101.325 J

So, [tex]3.15atm.L(\frac{101.325J}{1atm.L})[/tex]

= 319 J

So, 319 J of work is involved in a chemical reaction. Positive work means the work is done on the system.

Final answer:

To find the amount of work involved in a chemical reaction with a volume decrease, we calculate it using the formula for work, leading to a result of approximately 324.7 Joules.

Explanation:

The question asks for the calculation of work involved in a chemical reaction where the volume decreases under constant pressure. First, to find the work done, we can use the formula W = -PΔV, where P is the pressure and ΔV is the change in volume (final volume - initial volume). Given that the pressure remains constant at 0.829 atm and the volume decreases from 5.35 L to 1.55 L, we have ΔV = 1.55 L - 5.35 L = -3.8 L. To convert this work into joules (J), we use the conversion factor where 1 L·atm = 101.3 J. Therefore, the work done is W = -0.829 atm × -3.8 L × 101.3 J/(L·atm) = 324.7226 J, which can be rounded to approximately 324.7 J.