what is NOT powered by the PSU of your computer?

i believe this is true

i think  this is true

What type of movies?

Only Technician A is correct because the excessive length of a heater hose is indeed to protect the heater core from undue stress. Heater hoses do not significantly 'stretch' over time as Technician B suggests.

The question deals with the length of heater hoses in a vehicle's heating system. Technician A suggests that the excessive length of a heater hose is designed to absorb vibrations and prevent stress on the heater core. This is accurate because allowing some slack in the hose can prevent tension that might arise from engine movement or hose expansion and contraction due to temperature changes. On the other side, Technician B's statement that a heater hose 'stretches' over time and should be replaced with a shorter hose is incorrect. Hoses may slightly expand, but not to the extent that they would require being significantly shorter upon replacement.

Therefore, the correct answer is D. Technician A is correct, as it's important to install the hose with proper slack to protect the heater core from stress, but not because the hoses 'wear' into a longer length.

Technician A is correct; the excessive length of a heater hose is intended to protect the heater core from undue stress.

The correct answer is D. Technician A.

Technician B's statement is not accurate. The length of a heater hose is not determined by excessive wear. Rather, the excessive length of a heater hose is intended to protect the heater core from undue stress.

The heater core is a component of the vehicle's heating system that is responsible for generating hot air. It is located inside the vehicle's passenger compartment and is connected to the engine by the heater hose. The heater hose allows hot coolant from the engine to flow into the heater core, where it is then used to heat the air that is blown into the passenger compartment. The excessive length of the heater hose is designed to provide flexibility and allow for movement of the engine and the heater core, reducing the risk of damage to the core.

The Clayton-Bulwer Treaty was signed by the U.S and Britain in April, 1850 being John M. Clayton and Sir Henry Lytton Bulwer the men who negotiated.  The Hay–Pauncefote Treaty signed in 1901 replaced the Clayton–Bulwer Treaty also negotiated by John Milton Hay, secretary of State of the U.S.

Answer:

1. Public project

2. true

3. True

4. Simple

5. The info header

6. How to navigate in the space and how to interact with objects

7. Mesh

8. Toolboxes

9. True

10. Keyboard Shortcut

11.Num Lock

12. False

13.False

14. the polygon viewing on the default screen

15. The standard layout used for new files

WARNING

This was the correct answers for 3-D Computer Modeling A Unit 5 Quiz on Connections Academy

Not sure if answers and questions differ for people this was just my quiz answers

Hope it helps y’all

If a submarine's viewing port has a surface area of 0.0100 m2, the force exerted by the water on it at this depth will be 416,000 N in magnitude.

If a submarine's viewing port has a surface area of 0.0100 m2, the force exerted by the water on it at this depth will be 416,000 N in magnitude. The two fluid pressures that are in play are the internal atmospheric air pressure and the external water pressure, which includes the atmosphere operating on it at the surface.

The net force due to fluid pressure can be calculated by using the gauge pressure of the water since the atmospheric pressure acts both internally and is also included in the water pressure and the air pressures virtually cancel each other out.

A force is a vector quantity since it has b0th magnitude and direction. It is calculated using newtons as the SI unit of mea.sure (N). F stands for force (formerly P).

Therefore, If a submarine's viewing port has a surface area of 0.0100 m2, the force exerted by the water on it at this depth will be 416,000 N in magnitude.

Learn more about force here:

brainly.com/question/14110395

#SPJ3

Answer:

File

Explanation:

Whe you use a menu bar, that is the menu that is located at teh top of the window of teh program in most of the computer systems that exist nowadays, for example, In mac you have them at the top of your program window, and the most common first item in the Menu is the tab "File" in Windows or Pc is also "File" so the item File would be the best answer to this question.

It is true that Java is a high-level web programming language often used for web applications.

Java is a high-level, class-based, object-oriented programming language with a low number of implementation dependencies.

Java is a high-level programming language popular for web development and other applications.

It is an object-oriented language that is portable and platform-independent, which means that Java code can run on any platform that supports the Java Virtual Machine (JVM).

Java is frequently used to create web applications, server-side applications, mobile apps, and desktop apps.

It is well-known for its stability, dependability, and security, and many large organisations rely on it for mission-critical applications.

Thus, the given statement is true.

For more details regarding Java, visit:

https://brainly.com/question/29897053

#SPJ3

True

In most academic reports, most specifically, an MLA academic report, Student’s last name and current page number is contained in the headers. In MLA, which is most common used formatting guide in academic reports, headers numbers all pages consecutively within the right margin.

The 'Grouping' function is used to combine several objects into a single unit in graphic design and computer applications, which allows for easy manipulation and alignment of the grouped objects as one entity.

The option used to combine objects so that they can be treated as a single unit in graphic design and computer applications is typically called 'Grouping'. In software programs like vector graphic editors and many graphical user interfaces, you can select multiple objects and apply the group function. Once grouped, the objects will move, resize, and be adjusted together as though they were a single unit.

This is useful for maintaining the relative layout of elements when moving them around or aligning them about other objects. Grouping can often be done by selecting the objects you wish to combine and then either right-clicking to find the 'group' command or using a direct keyboard shortcut, such as 'Ctrl+G' in many programs. This makes it easier to manipulate complex designs or structures without altering the positioning of individual components within the grouped set.

Final answer:

Use non-sensitive transactions on public computers and engage in private browsing. Disconnect from the internet before opening downloaded documents. For security, use a personal device with Chrome.

Explanation:

When using a public computer for browsing the Internet, try to use non-sensitive transactions. Also, use private or incognito browsing whenever you can. It's important to be cautious about entering identifying information into a website, such as your address, and be wary of downloading documents that could access the internet, like photos, Word documents, or PDFs. If necessary, disconnect from the internet before opening such a document. Remember that the most basic version of encrypted communications is in-transit encryption, which protects the content of your communications when browsing the web. For essential online activities, it is recommended that users complete these using a desktop or laptop computer and in Chrome for better security and performance.

To output numbers from 1 to 15:

1. Initialize a counter to 1.

2. Use a loop to iterate while the counter is ≤ 15.

3. Print the counter's current value.

4. Increment the counter by 1.

5. Repeat until the counter exceeds 15.

6. End the program.

To design the logic for a program that outputs every number from 1 through 15, we can use a simple loop structure. Here is a step-by-step outline of the logic:

1. **Start**: Initialize the program.

2. **Initialize Counter**: Set a counter variable to 1. This will be our starting point.

3. **Loop Condition**: Create a loop that will run as long as the counter variable is less than or equal to 15.

4. **Output Number**: Inside the loop, output the current value of the counter variable.

5. **Increment Counter**: Increase the counter variable by 1.

6. **End Loop**: When the counter variable exceeds 15, exit the loop.

7. **End**: Terminate the program.

Here's a pseudocode representation of this logic:

```

BEGIN

   SET counter = 1

   WHILE counter <= 15 DO

       PRINT counter

       INCREMENT counter by 1

   END WHILE

END

```

### Explanation

1. **Initialize Counter**:

   - `SET counter = 1`: We start the counter at 1.

2. **Loop Condition**:

   - `WHILE counter <= 15 DO`: The loop will continue to execute as long as the counter is less than or equal to 15.

3. **Output Number**:

   - `PRINT counter`: Output the current value of the counter.

4. **Increment Counter**:

   - `INCREMENT counter by 1`: Increase the counter by 1 with each iteration of the loop.

5. **End Loop**:

   - The loop ends when the counter is greater than 15.

6. **End**:

   - The program terminates after printing numbers from 1 through 15.

### Example in Python

To provide a concrete example, here's how you could implement this logic in Python:

```python

def print_numbers():

   counter = 1

   while counter <= 15:

       print(counter)

       counter += 1

print_numbers()

```

This Python function, `print_numbers`, follows the outlined logic to print every number from 1 through 15.

[tex]\huge{\purple{\underline{\underline{\mathfrak{\red{\bigstar Java:: \bigstar}}}}}}[/tex]

public class Main {

public static void main(String [] args) {

System.out.println("Hello World");

}

}

[tex]\gray{\rule{300pt}{0.4em}}[/tex]

[tex]\huge{\purple{\underline{\underline{\mathfrak{\red{\bigstar Python:: \bigstar}}}}}}[/tex]

print('Hello World')

[tex]\gray{\rule{300pt}{0.4em}}[/tex]

[tex]\huge{\purple{\underline{\underline{\mathfrak{\red{\bigstar C++:: \bigstar}}}}}}[/tex]

#include <iostream>

using namespace std;

int main() {

cout << "Hello World";

return 0;

}

[tex]\gray{\rule{300pt}{0.4em}}[/tex]

Based on these tasks, a worker in the Program and Software Development Information Technology pathway should consider applying for this job. The correct option is a.

Chief information officer and IT manager are typical job titles. Students who major in programming and software development learn the foundations of software, database, and game creation.

Following the road of programming and software development will probably be enjoyable for an information technology worker. Managing initiatives involving computers and information systems.

Managers of computer and information systems supervise and coordinate an organization's technology-related activities. They oversee teams that monitor databases, deploy new software, and safeguard network security.

Therefore, the correct option is A. Program and Software Development.

To learn more about Software Development, refer to the link:

https://brainly.com/question/3188992

#SPJ6

Micro USB is a miniaturized version of the Universal Serial Bus (USB) interface developed for connecting compact and mobile devices such as smartphones, MP3 players, GPS devices, photo printers and digital cameras.

The three key objectives of computer security are confidentiality, integrity, and availability. Important objectives of computer security include: All of the above: Computer security consists mainly of three technical areas: confidentiality, integrity, and authentication or availability.

The most complex part of ssl is the handshake protocol.

When Handshaking Takes Place. In order to establish a connection between a computer and a device like a modem, printer, or server, the handshake process begins the connection by telling both devices how to communicate with each other. A classic example is the noises made when two dial-up modems connect to each other.