what is showed in the diagram /Users/jacinta/Desktop/NNNNNN.png

Final answer:

To calculate the bank angle for a curve of diameter 2 km (radius 1 km) to be driven at 30 m/s without relying on friction, the physics concepts of centripetal force and gravitational force component due to the bank angle are applied.

Explanation:

In this scenario, the safety of driving on a curved road relies on the balance between the inward centripetal force required for the car to maintain its curved path and the normal force exerted by the road on the car. The normal force acts perpendicular to the road surface and has both horizontal and vertical components.

To find the angle at which the road is banked, we first calculate the centripetal force required for the car to negotiate the curve safely. This force is given by the formula [tex]\( F_c = \frac{mv^2}{r} \)[/tex], where [tex]\( m \)[/tex] is the mass of the car, [tex]\( v \)[/tex]is the velocity of the car, and [tex]\( r \)[/tex] is the radius of the curve. Given that the diameter of the road is 2 km, the radius[tex]\( r \)[/tex]is half of this distance.

Once we determine the centripetal force, we recognize that it must be balanced by the horizontal component of the normal force. The vertical component of the normal force counteracts gravity. Therefore, the angle at which the road is banked can be found by taking the inverse tangent of the ratio of the centripetal force to the gravitational force.

By calculating this angle, we can determine the angle at which the road must be banked to safely accommodate the car's velocity while moving along the curved path. In this case, the calculated angle is approximately [tex]\( 5.22^\circ \).[/tex]

There might be a problem of a lot of power being dissipated if too many

appliances are turned on at once.

We can infer from Ohm's law that as resistance decreases, the total current increases.

I= V/R

The power dissipated through the circuit is directly proportional to the square

of the current.

P= I²R

We can therefore state that the power dissipated via heat will be much when

too many appliances are turned on at once.

Read more about Electricity here https://brainly.com/question/25144822

The correct choice is

A. III and IV only

according to newton's second law, force is directly proportional to the acceleration of the object and vice versa and is given as

F = ma

where F = net force on the object

m = mass of the object

a = acceleration of the object

when an unbalanced force acts on an object, the object experiences acceleration. we know that acceleration is nothing but the time rate of change of velocity. hence object experience change in velocity. The velocity can change either by a change in speed or by change in direction of motion.

The wavelength of the electron from the given kinetic energy is [tex]7.1 \times 10^{-10} \ m[/tex].

The wavelength of the electron from the given photon energy is [tex]4.13 \times 10^{-7} \ m[/tex].

The momentum of the electron is calculated as follows;

[tex]P = \sqrt{2Km} \\\\P = \sqrt{2 \times (3 \times 1.6 \times 10^{-19} \times 9.11 \times 10^{-31} } = 9.35 \times 10^{-25} \ kgm/s[/tex]

The wavelength of the electron is determined by using  De Broglie's equation.

[tex]\lambda = \frac{h}{p} \\\\\lambda = \frac{6.6 \times 10^{-34} }{9.35 \times 10^{-25}} = 7.1 \times 10^{-10} \ m[/tex]

E = hf

[tex]E = \frac{hc}{\lambda} \\\\\lambda = \frac{hc}{E} \\\\\lambda = \frac{6.6 \times 10^{-34} \times 3\times 10^8}{3\times 1.6 \times 10^{-19}} \\\\\lambda = 4.13 \times 10^{-7} \ m[/tex]

Learn more about wavelength of photons here: https://brainly.com/question/10728818

A major consequence of ozone depletion is C. more harmful UV rays will reach the earth's surface due to ozone depletion. The correct option is C.

A major consequence of ozone depletion is that more harmful ultraviolet (UV) rays will reach the Earth's surface (Option C). Ozone depletion in the stratosphere allows increased penetration of UV-B and UV-A radiation, which can have adverse effects on human health, ecosystems, and the environment. Excessive UV exposure can lead to skin cancer, cataracts, and other health issues in humans.

It can also harm marine life, crops, and forests, disrupting ecosystems and food chains. Stratospheric ozone depletion does not directly cause over-vegetation (Option A), render solar energy ineffective (Option B), or increase acid rain (Option D). Addressing ozone depletion through international agreements like the Montreal Protocol is crucial to mitigate its harmful impacts on the planet and its inhabitants.

To know more about ozone depletion

https://brainly.com/question/33333816

#SPJ6

Final answer:

In advising Volta on patenting a clean energy engine, it is essential to consider thermodynamic laws, which preclude the possibility of engines that produce more energy than used or have 100% efficiency, and acknowledge the efficiency limits set by the Carnot cycle.

Explanation:

When considering a patent for a novel clean energy engine, it is important to understand fundamental principles of thermodynamics, which would challenge the claim of an engine running by burning hydrogen that allegedly produces more energy than it uses. Such a system would violate the second law of thermodynamics, as it implies perpetual motion or over-unity efficiency, which is physically impossible because it would create energy from nothing. Likewise, claiming a 100% efficient motor also breaks this immutable law of physics, as all systems produce waste heat due to inefficiencies.

A typical gasoline car engine cannot achieve 100% efficiency due to these losses through heat, friction, and sound, among other factors. The theoretical efficiency ceiling for a gasoline engine is dictated by the Carnot cycle, which is typically less than 45% for a combustion engine. In terms of adopting clean energy technologies like geothermal power and vehicles running on electric or hydrogen fuel cells, it is important to approach these with a balanced view, recognizing both the environmental benefits and the practical limitations or challenges of these technologies.

Answer:

I would say the answer is C

Explanation:

Because I don't believe that stars can predict the future (correct me if I'm wrong)

Answer:

C

Explanation:

I did the test

Answer:

Einstein's General Relativity

Explanation:

The above statement is an interpretation of Einsteins General  theory of relativity. The theory of  relativity states that  all matter tends to wrap space in its vicinity and objects respond to this warp by changing their paths. The matter has mass and because of this mass the space in its vicinity is warped. The time space according to Einsteins is a streched fabric.

The answer is B. the universe was created from a cosmic explosion.

It is called the Big Bang Theory, but actually there was no REAL explosion. What happened was the universe expanded from a really dense and hot superforce. There were no stars, atoms, and the like. This point was called "singularity,"- a mass that contained all the mass, and the space-time of the universe.

Answer:

the total number of energy levels the electron can jump to.

Explanation:

Final answer:

The force of the bow on the arrow is equal and opposite to the force of the arrow on the bow, complying with Newton's Third Law. The energy to shoot an arrow comes from converting kinetic energy to potential energy, and then back to kinetic energy upon release. Projectile range is affected by the angle of release and external factors like wind.

Explanation:

When a bow and arrow is fired, the size of the force of the bow on the arrow is equal to the size of the force of the arrow on the bow. This is due to Newton's Third Law of Motion, which states that for every action, there is an equal and opposite reaction. In terms of archery, when the archer releases the string, the potential energy stored in the bow is transferred to the arrow, propelling it forward. At the same time, the bow experiences an equal and opposite force.

Energy and Projectile Motion

The energy it takes to shoot an arrow involves converting kinetic energy from pulling the string into potential energy stored in the string. Upon release, this potential energy turns back into kinetic energy, which determines the speed and range of the arrow. For a fixed initial speed, the range of a projectile like an arrow is determined by the angle of release. The smaller angle is often preferable due to minimal air resistance and other factors like wind, while a larger angle may be useful to shoot over obstacles or reach longer distances, as with a football punter using a higher trajectory to maximize hang time.

Final answer:

The steel deck of the Humber Bridge would expand by 0.362 meters (362 millimeters)

Explanation:

To calculate the change in length of the steel deck of the Humber Bridge when the temperature increases you need to use the linear thermal expansion formula: [tex]\(\Delta L = \alpha L_0 \Delta T\),[/tex] where [tex]\(\Delta L\)[/tex]is the change in length, \(\alpha\) is the coefficient of thermal expansion for steel [tex](\12 x 10^-6 /\u2103\), \(L_0\)[/tex] is the original length of the steel structure, and \(\Delta T\) is the change in temperature.

First, find the change in temperature: [tex]\(18.5 \u2103 - (-3.0 \u2103) = 21.5 \u2103\).[/tex]

Then, use the given length of the Humber Bridge span (1410 meters) and plug these values into the equation:

[tex]\(\Delta L = (12 x 10^{-6}/\u2103)(1410 m)(21.5 \u2103)\)[/tex]

By doing the calculation:

[tex]\(\Delta L = 0.362 m\)[/tex]

The steel deck of the Humber Bridge would expand by 0.362 meters (or 362 millimeters).