What is the average density of a hexane/octane mixture comprised
of 10 kg of hexane and 30 kg of octane? The density of hexane is
0.66 and that of octane is 0.703.

Answer:

The correct answer is: 1.316 . 10⁻³ m³/kg.

Explanation:

The density (ρ) of a substance is the ratio of its mass (m) to its volume (V). At constant temperature and pressure, its value is constant and it is an intrinsic property of materials. The units of density are kg/m³.

[tex]\rho = \frac{m}{V}[/tex]

The specific volume (ν) of a substance is the ratio of its mass to its volume. We can see that it is the reciprocal of density and an intrinsic property of matter as well. Therefore, the units of specific volume are m³/kg.

[tex]\nu = \frac{V}{m}=\frac{1}{\rho }[/tex]

Given we know the density of the liquid, we can use this relationship to find out its specific volume:

[tex]\nu =\frac{1}{\rho }=\frac{1}{760.0kg/m^{3} } =1.316 .10^{-3} m^{3} /kg[/tex]

Answer:

The answer to your question is:

mass = 3.74 g

Explanation:

Data

V = (4/3) πr³

density = 1.74 g/cm³

radius = r = 0.80 cm

Process

V = (4/3) π(0.8)³             Substitution

V = 2.1446 cm³

mass = density x volume

mass = 1.74 x 2.1446      Substitution

mass = 3.74 g

I don't understand if the second section is also a question.

Answer: The change in volume is 2.05 L

Explanation:

To calculate the final temperature of the system, we use the equation given by Charles' Law. This law states that volume of the gas is directly proportional to the temperature of the gas at constant pressure.

Mathematically,

[tex]\frac{V_1}{T_1}=\frac{V_2}{T_2}[/tex]

where,

[tex]V_1\text{ and }T_1[/tex] are the initial volume and temperature of the gas.

[tex]V_2\text{ and }T_2[/tex] are the final volume and temperature of the gas.

We are given:

[tex]V_1=3.25L\\T_1=250.0K\\V_2=?\\T_2=406.8K[/tex]

Putting values in above equation, we get:

[tex]\frac{3.25L}{250.0K}=\frac{V_2}{406.8K}\\\\V_2=5.30L[/tex]

Change in volume = [tex]V_2-V_1=(5.30-3.25)L=2.05L[/tex]

Hence, the change in volume is 2.05 L

Answer:

The reaction rate k is 0.0012563 (1/hour).

Explanation:

We considered the reactions occurring in the plant as first order, and represented by this equation:

[tex]y = L (1- e^{-kt})[/tex]

where y is the BOD at time t, L is the initial value of BOD and k is the reaction rate.

If we replaced with the values

y = 2 mg O2/l (1% of the initial value)

L = 200 mg 02/l

t = 8 hr

We can calculate k

[tex]y=L(1-e^{-kt})\\\\k=-(1/t)*ln(1-y/L) = -(1/8)*ln(1-2/200)=-(1/8)*(-0.01)=0.0012563 \, hour^{-1}[/tex]

The reaction rate k is 0.0012563 1/hour.

Final answer:

The rate of reaction for a municipal wastewater treatment plant can be found by calculating the total oxygen consumed to lower the BOD, using the volume of wastewater and the residence time. The initial BOD is 200 mg O2/liter and is reduced to a negligible level, indicating a complete reaction over the course of the 8-hour residence time.

Explanation:

Finding the Rate of Reaction in Wastewater Treatment Tanks

The student is tasked with finding the rate of reaction for a municipal wastewater treatment plant where wastewater is treated with aerobic bacteria that decompose organic material. The process significantly lowers the biochemical oxygen demand (BOD) from an entering feed of 200 mg O2/liter to a negligible level in the effluent. The key to solving for the rate of reaction is utilizing the given information: the wastewater volume (32,000 m3/day) and the mean residence time (8 hours)

To find the rate of reaction, we need to calculate the amount of oxygen consumed by the microorganisms to reduce the BOD to negligible levels. The initial BOD is given as 200 mg O2/liter, and since it's reduced to a negligible level, we can assume that virtually all the initial oxygen demand is consumed by the reaction. The volume converted to liters (since BOD is in mg/liter) and residence time in days must be considered to calculate the daily rate of reaction:

Once the daily rate is found, the rate of reaction will be the amount of oxygen consumed per day divided by the volume of wastewater treated in one day (in liters), providing the rate in mg O2/liter/day.

Answer:

b.0.34 M

Explanation:

Given that:

Mass of NaCl = 20 grams

Molar mass of NaCl = 58.44 g/mol

The formula for the calculation of moles is shown below:

[tex]moles = \frac{Mass\ taken}{Molar\ mass}[/tex]

Thus,

[tex]Moles= \frac{20\ g}{58.44\ g/mol}[/tex]

[tex]Moles= 0.3422\ mol[/tex]

Given that volume = 100 mL

Also,

[tex]1\ mL=10^{-3}\ L[/tex]

So, Volume = 100 / 1000 L = 0.1 L

Considering:

[tex]Molarity=\frac{Moles\ of\ solute}{Volume\ of\ the\ solution}[/tex]

[tex]Molarity=\frac{0.3422}{0.1}[/tex]

Molarity = 0.34 M

Answer:

Pr = 2273.58

Explanation:

∴ Cp = 0.5 J/g.°C

∴ κ = 0.2 W/m.°C * ( J/s / W ) = 0.2 J/s.m.°C

∴ μ = 2200 Lbm/ft.h * ( 453.592 g/Lbm ) * ( ft / 0.3048 m ) * ( h/3600 s )

⇒ μ = 909.433 g/m.s

⇒ Pr = ((0.5 J/g.°C )*( 909.433 g/m.s )) / 0.2 J/s.m.°C

⇒ Pr = 2273.58

Answer:

We use coolant instead of water because when heated, water can start to accumulate the minerals that it has, and this can corrode the metal on your car. Other solution could be to use distilled water, but is will also corrode the metal of your radiator. One advantage of ethylene glycol is that prevents the corrosion in your radiator providing a protective coating to the metals.

Answer: The mass of air is 1.18 g

Explanation:

To calculate the number of moles, we use the equation given by ideal gas equation:

[tex]PV=nRT[/tex]

Or,

[tex]PV=\frac{m}{M}RT[/tex]

where,

P = pressure of the gas = 150 psia = 10.2 atm   (Conversion factor:  1 psia = 0.068 atm)

V = Volume of gas = [tex]10in^3=0.164L[/tex]    (Conversion factor:  [tex]1in^3=0.0164L[/tex] )

m = mass of air = ?

M = Average molar mass of air = 28.97 g/mol

R = Gas constant = [tex]0.0820\text{ L atm }mol^{-1}K^{-1}[/tex]

T = temperature of the gas = [tex]440^oF=499.817K[/tex]  (Conversion factor: [tex](T(K)-273.15)=(T(^oF)-32)\times \frac{5}{9}[/tex]  )

Putting values in above equation, we get:

[tex]10.2atm\times 0.164L=\frac{m}{28.97g/mol}\times 0.0820\text{ L atm }mol^{-1}K^{-1}\times 499.817K\\\\m=1.18g[/tex]

Hence, the mass of air is 1.18 g

Explanation:

Monosaccharides are the elementary form of the sugar and most basic units of  the carbohydrates. These sugars cannot be further hydrolyzed to form the simpler chemical compounds. The general formula is [tex]C_nH_{2n}O_n[/tex]. Example: Glucose and fructose.

Disaccharide is sugar which is formed when the two monosaccharides are joined by the glycosidic linkage. Disaccharides are soluble in the water. Examples: sucrose and lactose.

Oligosaccharide is the saccharide polymer which contains small number of the monosaccharides. They can have many functions like the cell recognition and the cell binding. Example: glycolipids which have role in immune response.

Polysaccharides are the polymeric carbohydrate molecules which are composed of the long chains of the monosaccharide units that are bound together by the glycosidic linkages which on the hydrolysis give constituent monosaccharides or th eoligosaccharides. Example: Starch.

Glycoconjugates is general classification for the carbohydrates which are covalently linked with the other chemical species such as peptides, proteins, saccharides and lipids.  Example: Blood proteins

Answer:

q = Positive

w = Negative

Explanation:

As per first law of thermodymanics,

ΔE = q + w

Where,

ΔE = Change in internal energy

q = Heat absorbed or heat released by the system

w = Work done

Sign conventions are used for heat transfer and work done during a thermodynamics process.

Sign convention for Heat transfer

Sign convention for Work done

In the given question, work is done on the surroundings so, w is negative.

Heat flows into a system or in other word heat is added to the system,

So q is positive.

Answer:

c. 1.4 x 10²³ oxygen atoms

Explanation:

The number of oxygen atoms in one molecule of CH₃COOH is 2.

Avogadro's constant relates the number of molecules in one mole:

6.022 × 10²³ mol⁻¹

Thus, the number of oxygen atoms in one molecule of acetic acid can be converted to the number of oxygen atoms in one mole of acetic acid:

(2 oxygen atoms / molecule)(6.022 × 10²³ molecule / mol) = 1.204 x 10²⁴ atoms per mole

Finally, the number of oxygen atoms in 0.12 moles of acetic acid are calculated:

(1.204 x 10²⁴ atoms / mol)(0.12 mol) = 1.4 x 10²³ atoms/mol

Answer:

[tex]A(t)=1.8+34.2*e^{-t}[/tex]

Explanation:

The concentration of CO2 in the room will be the amount of CO2 in the room at time t, divided by the volume of the room.

Let A(t) be the amount of CO2 in the room, in ft3 CO2.

The air entering the room is 3000 ft3/min with 0.06% concentrarion of CO2. That can be expressed as (3000*0.06/100)=1.8 ft3 CO2/min.

The mixture leaves at 3000 ft3/min but with concentration A(t)/V. We can express the amount of CO2 leaving the room at any time is A(t).

We can write this as a differential equation

[tex]dA/dt=v_i-v_o=1.8-A[/tex]

We can rearrange and integrate

[tex]dA/dt=v_i-v_o=1.8-A\\\\dA/(A-1.8)=-dt\\\\\int(dA/(A-1.8) = -\int dt\\\\ln(A-1.8)=-t+C\\\\A-1.8=e^{-t}* e^{C}=C*e^{-t}\\\\A=1.8+C*e^{-t}[/tex]

We also know that A(0) = 12000*(0.3/100)=36 ft3 CO2.

[tex]A(0)=1.8+C*e^{-0}\\36=1.8+C*1\\C=34.2[/tex]

Then we have the amount A(t) as

[tex]A(t)=1.8+34.2*e^{-t}[/tex]

The subsequent amount A(t) of carbon dioxide in the room at time t is determined by solving the differential equation that models the problem as a tank mixing problem, accounting for the rate of air being pumped in and out of the room.

To determine the subsequent amount A(t), in ft³, of carbon dioxide in the room at any given time t, we need to set up a differential equation that accounts for the rate of air being pumped in and out of the room. This situation is analogous to a classic problem in differential equations and mathematical modeling called the tank mixing problem.

The rate at which carbon dioxide enters the room is constant at 0.06% of the 3,000 ft³/min being pumped in, which equals 1.8 ft³/min of CO₂. The rate at which it leaves the room is proportional to the concentration of carbon dioxide in the room at time t. The change in the amount of carbon dioxide at any moment is then given by the rate in minus the rate out.

Let C0 be the initial concentration of CO₂ (0.3%), CV be the volume of the room (12,000 ft³), and r be the rate of air exchange (3,000 ft³/min). The differential equation modeling this situation is:

with initial condition A(0) = C0 * V. This equation can be solved using separation of variables and integrating both sides,

Upon inserting the values for V, C0, and r, we can find the expression for A(t).

Answer:  0.14 kg

Explanation:

Gourmet chocolate candy contains 7.00 g of dietary fat in each 22.7-g piece

That is 1 piece of candy weighs 22.7 g and contains 7.00 g of dietary fat

Converting the mass in pounds to kg  

1 lb = 0.45 kg = 450 grams    (1kg=1000g)

Number of pieces = [tex]\frac{450}{22.7g}=20pieces[/tex]

1 piece contains = 7 g of dietary fat

Thus 30 pieces would contain =[tex]\frac{7}{1}\times 20=140g[/tex] of dietary fat

1 g = 0.001 kg

Thus 140 grams =[tex]\frac{0.001}{1}\times 140=0.14kg[/tex]

Thus 0.14 kg of dietary fat are in a box containing 1.00 lb of candy.

Answer:

The ethanol has 21 vibrational modes.

Explanation:

A molecule can show 3 types of motions: one external called translational and two internal called rotational and vibrational.

In order to calculate the vibrational modes of a molecule we need to know the degrees of freedom of this molecule, it means the number of variables that are involved in the movement of this particle.

If we know that atoms are three dimensional we will know that they have 3 coordinates expressed as 3N. But the atoms are bonded together so they can move not only in translational but also rotational and vibrational. So, the rotational move can be described in 3 axes and the other vibrational move can be described as

3N-5 for linear molecules

3N-6 For nonlinear molecules like ethanol

So using the formula for nonlinear molecules where N is the amount of atoms in the chemical formula, so ethanol has 9 atoms

3(9)-6= 21

Thus, ethanol has 21 vibrational modes.

Final answer:

Ethanol has 21 vibrational modes, which can be calculated using the formula 3N-6 for non-linear molecules, where N equals the number of atoms in the molecule. The vibrational modes consist of various bond stretching and bending movements, and these can only occur at certain quantized frequencies.

Explanation:

The number of vibrational modes in a molecule depends on the number of atoms it contains and the types of bonds present. In the case of ethanol (C2H5OH), which is a relatively complex molecule, the actual number of vibrational modes can be calculated using the formula 3N-6 for non-linear molecules, where N is the number of atoms. Considering ethanol has 9 atoms, we can calculate its vibrational modes as 3(9)-6, resulting in 21 vibrational modes.

The reason for the 3N-6 rule is that each atom contributes three degrees of freedom (x, y, and z axes), but we subtract the six degrees corresponding to the translational and rotational movements of the molecule as a whole. The vibrational modes in a molecule are the various ways that the molecule's bonds can stretch, bend, and twist. These modes consist of various stretching and bending movements of the carbon-hydrogen, carbon-carbon, and carbon-oxygen bonds within the ethanol molecule.

It's important to note that molecular vibrations are quantized, meaning a molecule can only access these modes at specific frequencies. When a molecule like ethanol is exposed to infrared radiation that matches the frequency of one of its vibrational modes, it can absorb that radiation, causing a transition to a higher energy vibrational state.

Answer:

0,12 μmol/L of MgF₂

Explanation:

Preparation of solutions is a common work in chemist's life.

In this porblem says that you measure 0,00598 μmol of MgF₂ in 50,0 mL of water and you must calculate concentration in  μmol/L

You have 0,00598 μmol but not Liters.

To obtain liters you sholud convert mL to L, knowing 1000mL are 1 L, thus:

50,0 mL (1L/1000mL) = 0,05 L of water.

Thus, concentration in  μmol/L is:

0,00598 μmol / 0,05 L = 0,12 μmol/L -The problem request answer with two significant digits-

I hope it helps!

The concentration of the chemist's magnesium fluoride solution is 0.12 μmol/L when rounded to two significant digits, calculated by dividing the moles of solute by the volume of the solution in liters.

To calculate the concentration of the magnesium fluoride solution in μmol/L, we use the formula C = (n/V), where 'C' is the concentration, 'n' is the number of moles of solute, and 'V' is the volume of solution in liters.

First, we convert the volume from milliliters to liters: 50 mL = 0.050 L.

The number of moles (n) of MgF2 given is 0.00598 μmol, which is already in the correct units for our calculation.

Therefore, the concentration (C) of the solution is:

C = n/V

C = 0.00598 μmol / 0.050 L

C = 0.1196 μmol/L

When rounded to two significant digits, the concentration of the magnesium fluoride solution is 0.12 μmol/L.

Answer:

9.2584 mol/L is the solubility of helium in water at 25 °C.

Explanation:

Henry's law states that the amount of gas dissolved or molar solubility of gas is directly proportional to the partial pressure of the liquid.

To calculate the molar solubility, we use the equation given by Henry's law, which is:

[tex]C_{He}=K_H\times p_{H_2O}[/tex]

where,

[tex]K_H[/tex] = Henry's constant = [tex]3.26\times 10 mol/L atm[/tex]

[tex]p_{He}[/tex] = partial pressure of carbonated drink = 0.284 atm

Putting values in above equation, we get :

[tex]C_{He}=3.26\times 10 mol/L atm\times 0.284 atm=9.2584 mol/L[/tex]

9.2584 mol/L is the solubility of helium in water at 25 °C.

Answer:

When experiments are carried out or research is done in a certain field of knowledge the scientist at first hypothesise certain knowledge or make theoretical hypotheses about that field of knowledge.

And then conduct the experiment or research to derive certain conclusions and get answers which they can apply on the hypothesis made or on the previous knowledge they have and thereby confirm or negate the hypothesis.

When two scientists are working on similar experiment and they tend to differ in the conclusions drawn by the result, as they get from experiment then it is called as confirmation bias among the scientists.

Answer:

[tex]1s^22s^22p^63s^23p^64s^2[/tex]

Explanation:

Calcium is the chemical element with symbol Ca and the atomic number equal to 20. As alkaline earth metal, the element, calcium is reactive metal. IT lies in the second group and forth period of the periodic table.

The number of the valence electrons of the calcium element is 2 and thus primarily denotes these electrons and forms ionic bond.

The ground state- electron configuration for calcium is: [tex]1s^22s^22p^63s^23p^64s^2[/tex]

Answer:

K.E. = 5.4362 × 10⁻¹⁹ J

Explanation:

The expression for Bohr velocity is:

[tex]v=\frac{Ze^2}{2 \epsilon_0\times n\times h}[/tex]

Applying values for hydrogen atom,  

Z = 1

Mass of the electron ([tex]m_e[/tex]) is 9.1093×10⁻³¹ kg

Charge of electron (e) is 1.60217662 × 10⁻¹⁹ C

[tex]\epsilon_0[/tex] = 8.854×10⁻¹² C² N⁻¹ m⁻²

h is Plank's constant having value = 6.626×10⁻³⁴ m² kg / s

We get that:

[tex]v=\frac {2.185\times 10^6}{n}\ m/s[/tex]

Given, n = 2

So,

[tex]v=\frac {2.185\times 10^6}{2}\ m/s[/tex]

[tex]v=1.0925\times 10^6\ m/s[/tex]

Kinetic energy is:

[tex]K.E.=\frac {1}{2}\times mv^2[/tex]

So,

[tex]K.E.=\frac {1}{2}\times 9.1093\times 10^{-31}\times ({1.0925\times 10^6})^2[/tex]

K.E. = 5.4362 × 10⁻¹⁹ J

The  attention measures for a CaCl2  result with 1000 mg in 500 mL are0.2 w/ v, a  rate strength of 2 g/ L,0.01818 M, and molality isn't directly  reliable from the given data. For1.5 L of this  result, there are0.05454 coequals of CaCl2.

Computations for attention of CaCl2 result    In order to calculate the  colorful  attention measures of the given  result containing calcium chloride( CaCl2), we should first understand the  ensuing delineations     w/ v- Percent weight per volume expresses  attention as grams of solute per 100 mL of  result.  rate strength- The  quantum of solute in grams per 1000 mL( 1 L) of  result.  Molarity( M)- The number of  intelligence of solute per liter of  result.  Molality( m)- The number of  intelligence of solute per kilogram of detergent.    Given that the molecular weight of CaCl2 is 110 g/  spook, and we've 1000 mg( 1 g) in 500 mL, we can calculate the following     w/ v( 1 g/0.5 L) * 100 = 0.2 w/ v  rate strength 1 g in 500 mL equals 2 g in 1000 mL or 2 g/L.  Molarity( M)( 1 g/ 110 g/  spook)/(0.5 L) = 0.01818 M  Molality( m) can not be calculated without the mass of the detergent;  still, assuming the specific  graveness is 1, molality would be equal to molarity for  veritably dilute  results like this bone

Explanation:

The volumetric flow rate of water will be as follows.

       q = [tex]600 gpm \times \frac{0.000063 m^{3} s^{-1}}{1 gpm}[/tex]

         = 0.0378 [tex]m^{3}/s [/tex]

    Diameter = [tex]8 in \times \frac{0.0254 m}{1 in}[/tex]

                   = 0.2032 m

Relation between area and diameter is as follows.

           A = [tex]\frac{\pi}{4} \times D^{2}[/tex]

               = [tex]\frac{3.14}{4} \times (0.2032 m)^{2}[/tex]

               = 0.785 x 0.2032 x 0.2032

               = 0.0324 [tex]m^{2}[/tex]

Also,     q = A × V

or,         V = [tex]\frac{q}{A}[/tex]

                = [tex]\frac{0.0378 m^{3}/s}{0.0324 m^{2}}[/tex]

                = 1.166 m/s

As, viscosity of water = 1 cP = [tex]10^{-3}[/tex] Pa-s

Density of water = 1000 [tex]kg/m^{3}[/tex]

Therefore, we will calculate Reynolds number as follows.

 Reynolds number = [tex]\frac{D \times V \times density}{viscosity}[/tex]

                                 = [tex]\frac{0.2032 m \times 1.166 m/s  \times 1000}{10^{-3}}[/tex]  

                                = 236931.2

Hence, the flow will be turbulent in nature.

Thus, we can conclude that the Reynolds number is 236931.2 and flow is turbulent.

Explanation:

The given data is as follows.

             P = 3 atm

                = [tex]3 atm \times \frac{1.01325 \times 10^{5} Pa}{1 atm}[/tex]  

                 = [tex]3.03975 \times 10^{5} Pa[/tex]

    [tex]V_{1}[/tex] = 9 L = [tex]9 \times 10^{-3} m^{3}[/tex]    (as 1 L = 0.001 [tex]m^{3}[/tex]),  

        [tex]V_{2}[/tex] = 15 L = [tex]15 \times 10^{-3} m^{3}[/tex]

            Heat energy = 800 J

As relation between work, pressure and change in volume is as follows.

                  W = [tex]P \times \Delta V[/tex]

or,                W = [tex]P \times (V_{2} - V_{1})[/tex]

Therefore, putting the given values into the above formula as follows.

                  W = [tex]P \times (V_{2} - V_{1})[/tex]

                      = [tex]3.03975 \times 10^{5} Pa \times (15 \times 10^{-3} m^{3} - 9 \times 10^{-3} m^{3})[/tex]

                      = 1823.85 Nm

or,                   = 1823.85 J

As internal energy of the gas [tex]\Delta E[/tex] is as follows.

                     [tex]\Delta E[/tex] = Q - W

                                  = 800 J - 1823.85 J

                                  = -1023.85 J

Thus, we can conclude that the internal energy change of the given gas is -1023.85 J.

Answer:

b.

Explanation:

A conjugate acid-base pair are related to each other through the addition or loss of a proton. Acids react by giving up a proton, and the resulting product of that reaction is the conjugate base. Thus, the conjugate base will have one proton less than the acid. Similarly, bases react by receiving protons, so the conjugate acid will have one proton more than the conjugate base that reacted.

In the following example, HA is the acid while A⁻ is the conjugate base:

HA + H₂O ⇒ H₃O⁺ + A⁻

Answer option a. and c. are not correct since bases to not give up protons and acids to not receive protons. Base on the above information, a conjugate base reacts to produce the conjugate acid and vice versa. Thus, to produce the conjugate acid, the conjugate base received a proton. The correct answer is b.

A conjugate acid is formed by the addition of a proton to a base, and has the potential to donate that proton back, reverting to its original base form.

A conjugate acid is the species that is formed by the addition of a proton to a base. When we describe acid-base reactions in terms of conjugate acids and conjugate bases, we are applying the Brønsted-Lowry Acid-Base Theory. In this context, a conjugate acid/base pair is defined by the gain or loss of a single hydrogen ion. For example, when a base accepts a proton (H+), it forms its conjugate acid, and this conjugate acid has the potential to donate that proton back, essentially reverting to its original base form.

Conversely, when an acid donates a proton, it forms a conjugate base, which can accept a proton in a reverse reaction, thus potentially reforming the original acid. These relationships are fundamental to understanding acid-base chemistry and reactions where proton transfer occurs.

https://brainly.com/question/34186168

#SPJ6

Answer: The density of the metal is 10.60 g/mL and the volume occupied by 86.0 grams is 8.11 mL

Explanation:

To calculate the density of unknown metal, we use the equation:

[tex]\text{Density of substance}=\frac{\text{Mass of substance}}{\text{Volume of substance}}[/tex]       ......(1)

Volume of unknown metal = 19.8 mL

Mass of unknown metal = 210.0 g

Putting values in equation 1, we get:

[tex]\text{Density of unknown metal}=\frac{210.0g}{19.8mL}\\\\\text{Density of unknown metal}=10.60g/mL[/tex]

The density of the metal remains the same.

Now, calculating the volume of unknown metal, using equation 1, we get:

Density of unknown metal = 11.45 /mL

Mass of unknown metal = 86.0 g

Putting values in above equation, we get:

[tex]10.60g/mL=\frac{86.0g}{\text{Volume of unknown metal}}\\\\\text{Volume of unknown metal}=8.11mL[/tex]

Hence, the density of the metal is 10.60 g/mL and the volume occupied by 86.0 grams is 8.11 mL

Explanation:

Except for the use in the chemistry laboratory , were it is used to synthesize many useful products, silver nitrate is also has biolofical and medical relevance.

Silver nitrate is commonly used for silver staining, for demonstrating the reticular fibers, the proteins and the nucleic acids. It is also used as stain in the scanning electron microscopy.

Silver Nitrate is also used for the bone ulcers as well as the burns and the acute wounds.

Answer:

pH of buffer after addition of 1 mL of 0,1 M HCl = 7,0

Explanation:

It is possible to use Henderson–Hasselbalch equation to estimate pH in a buffer solution:

pH = pka + log₁₀

Where A⁻ is conjugate base and HA is conjugate acid

The equilibrium of phosphate buffer is:

H₂PO₄⁻ ⇄ HPO4²⁻ + H⁺    Kₐ₂ = 6,20x10⁻⁸; pka=7,2

Thus, Henderson–Hasselbalch equation for 7,00 phosphate buffer is:

7,0 = 7,2 + log₁₀ [tex]\frac{[HPO4^{2-}] }{[H2PO4^{-}]}[/tex]

Ratio obtained is:

0,63 = [tex]\frac{[HPO4^{2-}] }{[H2PO4^{-}]}[/tex]

As the problem said you can assume [H₂PO₄⁻] = 0,1 M and [HPO4²⁻] = 0,063M

As the amount added of HCl is 0,001 M the concentrations in equilibrium are:

H₂PO₄⁻   ⇄   HPO4²⁻ +        H⁺

0,1 M +x      0,063M -x  0,001M -x -because the addition of H⁺ displaces the equilibrium to the left-

Knowing the equation of equilibrium is:

[tex]K_{a} = \frac{[HPO_{4}^{2-}][H^{+}]}{[H_{2} PO_{4}^{-}]}[/tex]

Replacing:

6,20x10⁻⁸ = [tex]\frac{[0,063-x][0,001-x]}{[0,1+x]}[/tex]

You will obtain:

x² -0,064 x + 6,29938x10⁻⁵ = 0

Thus:

x = 0,063 → No physical sense

x = 0,00099990

Thus, [H⁺] in equilibrium is:

0,001 M - 0,00099990 = 1x10⁻⁷

Thus, pH of buffer after addition of 1 mL of 0,1 M HCl =

-log₁₀ [1x10⁻⁷] = 7,0

A buffer is a solution that can resist pH change upon the addition of an acidic or basic components. In this example you can see its effect!

I hope it helps!

The kinetic energy of an electron can be calculated utilizing the equation KE = hf - BE, but this specific equation cannot be solved without additional information such as the binding energy, frequency of the light radiation, or Plank's constant. Energy can also be calculated using Planck's equation,E = hf, or for a specific orbital using 13.6 eV / n², where n refers to the level of the orbital.

The kinetic energy acquired by an electron in a hydrogen atom after absorbing light radiation can be found by utilizing the equation KE = hf - BE (kinetic energy equals energy of radiation minus binding energy). In this case, if the electron absorbs a light radiation of energy 1.08x101 J, it's crucial to determine the binding energy first.

However, given the information available, further clarification is needed since binding energy, frequency of the radiation, or Plank's constant (h) are not specified in the question.

Similar energy calculations involve using Planck's equation E = hf, where E is energy, h is Planck’s constant, and f is the frequency of radiation. Furthermore, energy can also be calculated for a specific orbital of a hydrogen atom using the equation 13.6 eV / n², where n refers to the level of the orbital.

Remember, when using these equations you may need to convert your units appropriately to reach the correct answer.

https://brainly.com/question/31994371

#SPJ3

The mole fraction of NaCl in the solution is 3.15 × 10-2.

The mole fraction of NaCl in a solution prepared by dissolving 117 g NaCl in 1.11 kg H2O can be calculated by dividing the moles of NaCl by the total moles of solute and solvent. First, we convert the mass of NaCl to moles using its molar mass. Then, we calculate the moles of water by dividing its mass by its molar mass. Finally, we divide the moles of NaCl by the sum of moles of NaCl and moles of water to get the mole fraction of NaCl in the solution.

Given:

Step 1: Convert mass of NaCl to moles:

Moles of NaCl = (mass of NaCl / molar mass of NaCl) = (117 g / 58.44 g/mol) = 2 moles

Step 2: Convert mass of H2O to moles:

Moles of H2O = (mass of H2O / molar mass of H2O) = (1110 g / 18.02 g/mol) = 61.55 moles

Step 3: Calculate mole fraction of NaCl:

Mole fraction of NaCl = (moles of NaCl / (moles of NaCl + moles of H2O)) = (2 moles / (2 moles + 61.55 moles)) = 3.15 × 10-2

Answer:

0.350 grams

Explanation:

The given mass of the pill that has to be taken as a dosage for the medication = 350 mg

The medication has to be determined in grams which means that milligram has to be converted to grams.

The conversion of mg to g is shown below:

[tex]1\ milligram=10^{-3}\ gram[/tex]

So,

[tex]350\ milligram=350\times 10^{-3}\ gram[/tex]

[tex]350\ milligram=0.350\ gram[/tex]

The medication required in grams = 0.350 grams

Final answer:

To convert 350 mg to grams, divide by 1000, resulting in 0.35 grams of medication.

Explanation:

To convert the dosage of medication from milligrams to grams, you need to know the conversion factor between these two units.

There are 1000 milligrams in one gram.

Therefore, you can find the amount in grams by dividing the milligram dosage by 1000.

For the pill with a dosage of 350 mg of medication, the conversion to grams would be:

Total given grams/1000

= 350 mg ÷ 1000

= 0.35 grams

Answer: The concentration of [tex]Ba(OH)_2[/tex] comes out to be 0.129 M.

Explanation:

To calculate the concentration of base, we use the equation given by neutralization reaction:

[tex]n_1M_1V_1=n_2M_2V_2[/tex]

where,

[tex]n_1,M_1\text{ and }V_1[/tex] are the n-factor, molarity and volume of acid which is [tex]H_2SO_4[/tex]

[tex]n_2,M_2\text{ and }V_2[/tex] are the n-factor, molarity and volume of base which is [tex]Ba(OH)_2[/tex]

We are given:

[tex]n_1=2\\M_1=0.1023M\\V_1=12.58mL\\n_2=2\\M_2=?M\\V_2=10.00mL[/tex]

Putting values in above equation, we get:

[tex]2\times 0.1023\times 12.58=2\times M_2\times 10.00\\\\M_2=0.129M[/tex]

Hence, the concentration of [tex]Ba(OH)_2[/tex] comes out to be 0.129 M.