What is the best way to submit your assignments?
A. Email them to your instructor.
B. Fax them to your instructor.
C. Tell your instructor about them over the phone.
D. Access the Gradebook in the Main Menu.

Answers

Answer 1
A. Email your teacher right away. It would be the safest option.
Answer 2

The best way to submit an assignment is to Email them to your instructor, so Option A is the correct answer.

What are Assignments ?

Assignments are the task given by the instructor to make the students learn more about a certain topic .

Assignments help the students to develop the art of researching and creativity along with the development of knowledge in the particular area in which assignment is given.

Assignments should always be submitted on time and a student should never copy his or her assignment.

The best way to submit an assignment is to Email them to your instructor.

To know more about Assignments

https://brainly.com/question/25875756

#SPJ2


Related Questions

28. Technician A says that during one four-stroke cycle of a cylinder, the crankshaft completes
one revolution. Technician B says that during one four-stroke cycle of a cylinder, the camshaft
completes one revolution. Who is wrong? Explain why?​

Answers

Technician A is wrong

Explanation:
During the intake stroke and compression stroke, the piston goes up and down once as it takes in the air and compressed it. The crank then makes another turn as the compressed fuel air mixture is combusted and the piston is forced down, then back up again through the exhaust valve. This makes the crankshaft complete more then one full revolution. The camshaft however is different. It takes a full turn when it opens the intake valve, closes it, opens the exhaust valve, closes it, and then comes back around again to complete the cycle. Each cycle takes one rotation of the camshaft due to the fact that the camshaft opens the valves. However, more then one full turn for the crankshaft as the piston has to go up and down a couple times in between this cycle. Thus, technician A is wrong.

Tech A says never use a water hose to clean up dust after a repair. Tech B says never use a floor scrubber to clean up dust after repairs. Who is correct?

Answers

Answer:

Tech B

Explanation:

You ruin your mop that way. it will clump up and than you'll have a mud mess.

Question 14(Multiple Choice Worth 3 points)
(Lesson 7.2 LC)
The daily driving limit for time spent behind the wheel should be no more than
O two hours
Otwo to four hours
O six to eight hours
O a maximum of 12 hours

Answers

Answer:

The daily driving limit for time spent behind the wheel should be no more than six to eight hours.- third choice

Answer:

C.

Explanation:

A home electrical system is joined to the electric company's system at the junction of the

A. neutral strip in the panelboard.
B. black and red wires in the meter.
C. panelboard and service drop.
D. service entrance head and service drop.

Answers

That would be B, I hope this helps!

Your driver license will be _____ if you race another driver on a public road, commit a felony using a motor vehicle, or are found guilty of reckless driving three times in one year.
A. suspended
B. denied
C. canceled
D. revoked

Answers

Answer:

D

Explanation:

It would be revoked (don't do those things guys!!)

Answer:

D. Revoked

Explanation:

I got it right on FLVS

What is the best machine to measure the size of cables?

Answers

When operating, an instrument measures the total capacitance in the cable and then uses the cable's Mutual Capacitance Coefficient to calculate the cable's length. Capacitance-based measurement instruments can typically measure the length accurate to about 4 percent to 5 percent. i even gave an explanation if u wanted to see how it measures

3 MAOP stands for which of the following?

Answers

Maximum Allowable Operating Pressure

Two technicians are discussing the intake air temperature (IAT) sensor. Technician A says that the computer uses the IAT sensor as a backup to the engine coolant temperature (ECT) sensor. Technician B says that the powertrain control module (PCM) will subtract the calculated amount of fuel if the air measures hot. Who is correct

Answers

Both the technicians are correct.

Explanation

Intake air temperature sensor is used in engines of vehicles to monitor the temperature of air entering the engine.

They are basically made of thermistors whose electrical resistance changes according to temperature.

Depending upon the reading and accuracy of intake air temperature sensor, the power-train control module (PCM) will decide about the air and fuel mixture ratio in the engine.

The hot air in engine requires less fuel to operate the engine parts while cold air requires more fuel to operate the engine.

The ratio of air and fuel mixture should be maintained in the engine and it is done by PCM only after getting the input from IAT. So technician B is saying correct.

Also the IAT works as a backup to support the engine coolant temperature sensor by the computer.

As the IAT checks the temperature of outside air, it will help to change the coolant temperature of the engine based on the environment.

Thus technician A is also correct. So both the technicians are correct.

"How would you direct traffic in the result of a catastrophic earthquake?"

Answers

Answer:

In the result of a earthquake, you should direct people into areas that are safe, such as places where the ground has not been broken up, and then tell people to get out of their cars and be careful. You should also have them carry any valuable items out of the car(if they have time), and then wait until the initial shocks and aftershocks are over, and then tell them to get back into their cars and then drive carefully and safely.

Answer:

You would tell people to get out of the way and stay safe.

When the piston is at its highest position in the cylinder, it’s said to be at _____________.
The _____________ is a hollow metal tube drilled into the metal engine block.
The top of the cylinder is sealed by a metal cover called the _____________.
In a gasoline-powered engine, the _____________ ignites the air-and-fuel mixture in the cylinder and causes it to burn.
Why is it critical for the upper and lower end sections of an engine to work perfectly together?

Answers

Answer:

1. top dead center (TDC)

2. cylinder

3. cylinder head

4. spark plug

5. Sample answer: It’s critical for both sections to work perfectly together because the process by which power is created occurs so quickly that the timing must be precise for an engine to run smoothly and safely.

Explanation:

penn foster

When the piston is at its highest position in the cylinder, it’s said to be at Top dead center

The Cylinder is a hollow metal tube drilled into the metal engine block.

The top of the cylinder is sealed by a metal cover called the Cylinder head.

The top of the cylinder is sealed by a metal cover called the Cylinder head

In a gasoline-powered engine, the spark ignites the air-and-fuel mixture in the cylinder and causes it to burn.

What covers the cylinder of its engine?

In an internal combustion engine, the cylinder head (often abbreviated to simply "head") sits above the cylinders and forms the roof of the combustion chamber.

To learn more about the piston, refer

https://brainly.com/question/11506099

#SPJ2

When your driver license is _____, you will be prohibited from driving for a specified length of time
A. denied
B. suspended
C. revoked
D. canceled

Answers

When your driver license is suspended  you will be prohibited from driving for a specified length of time

The suspended license implies that your driver's license is temporarily revoked for a set length of time. By meeting certain criteria, you may be able to retrieve your license.

As per Indian country when you are caught speeding, the new law could suspend your license. Along with the suspension of the license, a minimum fine of Rs 1000 can be levied. The fine can be increased based on the car's speed and how far it exceeds the speed limit on that road.If your driving license is suspended, you will be unable to drive for an extended period of time.

Therefore, the final answer is "suspended"

Learn more:

brainly.com/question/15254370

If you're carrying a load that extends beyond the sides of your vehicle, you don't need to clearly mark it unless it extends more than _____ beyond the rear of the vehicle.

A. four inches
B. four feet
C. six feet
D. eight feet

Answers

Answer:

B. four feet

Explanation:

If you're carrying a load that extends beyond the sides of your vehicle, you don't need to clearly mark it unless it extends more than four feet beyond the rear of the vehicle.

Answer:b

Explanation: i did it and got it right

What is the lowest common denominator of 1/2 and 1/11

Answers

Answer:

22

Explanation:

2 and 11 are both prime so their GCF must be 2*11 which is 22.

For this case we have by definition, that the lowest common denominator of two or more fractions, is the number that results from calculating the lowest common multiple of the denominators of those same fractions.

We have the following fractions:

[tex]\frac {1} {2}[/tex] and[tex]\frac {1} {11}[/tex]

We look for the least common multiple of 2 and 11:

2: 2

11:11

[tex]l.c.m = 2 * 11 = 22[/tex]

Answer:

The lowest common denominator of the fractions is 22

If traffic is approaching on your left and there is a child riding a bike to your right, you should:

A. Move closer to oncoming traffic

B. Move closer to the bicyclist

C. Pull over until the road is clearer

Answers

Answer:

A. Move closer to oncoming traffic

Explanation:

If traffic is approaching on your left and there is a child riding a bike to your right, you should move closer to oncoming traffic.

Answer:

I believe the answer is C

Explanation:

Choosing option A would put you in danger. Choosing option B would put the child in danger. So your best bet would be to just pull over until all parties can continue safely.

How do i fix the ads at the bottom of my TCL tv​

Answers

Answer:

hit the exit button on your remote

Explanation:

Final answer:

To fix the ads at the bottom of your TCL TV, navigate to the settings menu from the home screen and disable options related to sponsored content, featured content, or advertisements. You might also customize the home screen to reduce ad visibility. If these steps don't work, refer to the owner's manual or contact TCL's customer support.

Explanation:

To fix the ads at the bottom of your TCL TV, you might be seeing what is known as Featured Content or sponsored content. This is a common feature on smart TVs, including TCL models, which display advertisements as a way for manufacturers to offset the cost of the TV's smart capabilities.

Here are the steps to try and remove or minimize these ads:

Navigate to your TV's home screen and go into the settings menu.Look for options related to advertising, smart features, or home screen customization.Disable any options related to sponsored content, featured content, or advertisements.If there's an option to customize the home screen, try removing the ad placements or minimizing their visibility.Some TVs may allow you to opt-out of personalized advertising which could reduce the number of ads.

Should these steps not work, consider consulting the owner's manual or TCL's customer support for model-specific instructions. Please note that completely removing ads might not be possible on some models where this feature is built into the TV's user interface.

In vehicles equipped with an anti-braking system the drivers foot must remain firmly on the

Answers

... brake pedal; In vehicles equipped with ABS, the driver's foot remains firmly on the brake pedal, allowing the system to automatically pump the brakes.

“Brake Pedal.”
The drivers foot must remain firmly on the brake petal


What is the multiplicity of the root x = -4?

Answers

Answer:

See explanation

Explanation:

The multiplicity of  a root of a polynomial equation is the number of times the root repeats.

Let [tex]x=a[/tex] be the root of [tex]f(x)[/tex], then;

[tex](x-a)^1=0[/tex] has a multiplicity of 1.

[tex](x-a)^2=0[/tex] has a multiplicity of 2.

[tex](x-a)^3=0[/tex] has a multiplicity of 3.

[tex](x-a)^m=0[/tex] has a multiplicity of m, where m is a positive integer.

We were given the root [tex]x=-4[/tex].

If [tex]f(x)=(x+4)(x-6)^3[/tex]

Then the multiplicity of the root [tex]x=-4[/tex] is 1.

If  [tex]f(x)=(x+4)^4(x-6)^3[/tex]

Then the multiplicity of the root [tex]x=-4[/tex] is 4.

Since the polynomial function or equation is not given in the question, we cannot determine the multiplicity of this root.

But I hope with this explanation, you can refer to the original(complete) question and choose the correct answer.

Other Questions
What are two reasons why tuples exist in Python? The Ottoman Empire was attacked on two fronts by - the allied forces- the central powers- Germany - Russia A 10.2-kg mass is located at the origin, and a 4.6-kg mass is located at x = 8.1 cm. Assuming g is constant, what is the location of the center of mass xcom and the location of the center of gravity xcogof the two masses? Are the locations the same? Why or why not? Splish Brothers Inc. started the year with total assets of $322000 and total liabilities of $262000. During the year the business recorded $635000 in revenues, $329000 in expenses, and dividends of $57000. Stockholders equity at the end of the year was: A 2.0-kg block is on a perfectly smooth (frictionless) ramp that makes an angle of 30^\circ30 with the horizontal. What is the force of the ramp on the block? PLEASES HELPPP !!!!Which of the following is an equation of a line parallel to the equation y=1/2x+1? a. y=-1/2x+1b. y=-2x-5c. y=1/2x-5d. y=2x-5 The formation of blood cells is a complex process. In most cases, the cells have been transformed ("morphed") from a previous cell type. The precursor cells from which each individual type of blood cell is formed through a series of maturation steps are called _________.stem cellsprogenitor cellscolony-forming unitsblast cellsall of these choices Describe the grain structure of a metal ingot that was produced by slow-cooling the metal in a stationary open mold. A number, y, is equal to twice the sum of a smaller number and 3. The larger number is also equal to 5 more than 3 times the smaller number. Which equations represent the situation? If the area under the standard normal curve to the left of zequalsminus1.72 is 0.0427, then what is the area under the standard normal curve to the right of zequals1.72? PLEASE HURRY!! Discuss how and why various groups of people within American society began to challenge and criticize the nations way of life in the 1960s. Were their criticisms valid? What were some of the goals of these groups, and how did they go about achieving them? Need help in number 20. Thanks for helping What is the interquartile range of the following data set? 13, 17, 18, 15, 12, 21, 10 PLEASE HELP THIS SHOULD BE MY LAST ONE (TCO 4) What will be the value of input_value if the value 5 is input at run time? cin >> input_value; if (input_value > 5) input_value = input_value + 5; else if (input_value > 2) input_value = input_value + 10; else input_value = input_value + 15; 1/2p+ 2/5 p =Simplify expression ^^ How to tell if you have a stress fracture Which statement about drugs is true?A. A drug is any substance that is harmful to the body.B. Because alcohol is not illegal, drinking it is not a form of substance abuse.C. A drug is any substance that alters the normal functioning of the body. Video Planet (VP) sells a big screen TV package consisting of a 60-inch plasma TV, a universal remote, and on-site installation by VP staff. The installation includes programming the remote to have the TV interface with other parts of the customers home entertainment system. VP concludes that the TV, remote, and installation service are separate performance obligations. VP sells the 60-inch TV separately for $2,040, sells the remote separately for $120, and offers the installation service separately for $240. The entire package sells for $2,300. Required: How much revenue would be allocated to the TV, the remote, and the installation service? Mauro Products distributes a single product, a woven basket whose selling price is $16 per unit and whose variable expense is $12 per unit. The companys monthly fixed expense is $10,000. Required: 1. Calculate the companys break-even point in unit sales. 2. Calculate the companys break-even point in dollar sales. (Do not round intermediate calculations.) 3. If the company's fixed expenses increase by $600, what would become the new break-even point in unit sales? In dollar sales? (Do not round intermediate calculations.)