What is the magnitude of B?
speed=2.64*10^7
radius .160m
R=mv/|q|B,

Answers

Answer 1
Charge of electron/proton = 1.6*10^-19 coulombs Mass of proton m1 = 1.67*10^-27 kg Mass of electron m2 = 9.109 × 10-31 kg Given :- Speed v = 2.64*10^7 m/s Radius R = 160 m R = m*v / (q*B) q*B = m*v / R B = m*v / (R*q) For proton B = 1.67*10^-27 * 2.64*10^7 / (160 * 1.6*10^-19) B = 1.722 *10^-3 Now for electron B = 9.109*10^-31 * 2.64*10^7 / (160 * 1.6*10^-19) B = 9.39 *10^-7

Related Questions

The surface pressures at the bases of warm and cold columns of air are equal. air pressure in the warm column of air will ______ with increasing height __________ than in the cold column.

Answers

In atmospheric science, surface pressure is the atmospheric pressure at a location on Earth's surface. It is directly proportional to the mass of air over that location. For numerical reasons, atmospheric models such as general circulation models (GCMs) usually predict the nondimensional logarithm of surface pressure.

The answer is decrease more slowly


A solid steel sphere of density 7.86 g/cm3 and mass 1 kg spin on an axis through its center with a period of 2.3 s. given vsphere = 4 3 π r3 , what is its angular momentum? answer in units of kg m2 /s.

Answers

The solution for this problem is:

density = mass / volume 
7860 = 1 / ((4/3) pi r^3) 
r^3 = 1 / (7860 * 4/3*pi) 
r = (1 / (7860 * 4/3*pi))^(1/3)

= 0.067 m 

Inertia = (2/5)mr^2

= (2/5) x 1 x 0.067^2

= 0.0017956 kg-m^2 

1/2.3 = 0.4348 rev/s 

0.4348 x 2pi = 2.732 rad/s 

Angular momentum = Inertia x rad/s 

0.0017956 x 2.732 = 0.00490557 kg m^2/s

when you snap your wrist open, the frisbee ____
A. Flips.
B. Tumbles.
C. Spins.
D.Flops.

Answers

D. should be your answer

Which of the following is true of energy? A. Energy can be created. B. Energy can be destroyed. C. Energy is constantly increasing. D. Energy is conserved.

Answers

Hello,

The answer is option D "Energy is conserved".

Reason:

The answer to this question is option D because it seems to be the best fit. Its not option A or B because energy cannot be created nor destroyed it only can be transformed into another type of energy. It shouldn't be C because energy is not always increasing because potential energy is the amount a energy that is in a object THATS NOT MOVING....therefore your answer is option D.

If you need anymore help feel free to ask me!

Hope this helps!

~Nonpotrit

How can an electron in an atom lose energy to go from a higher energy level to a lower energy level? select one:
a. it exchanges gravitational potential energy for kinetic energy.
b. it loses gravitational potential energy.
c. it releases a photon equal in energy to its own energy drop.
d. it absorbs a photon equal in energy to its own energy drop.
e. it loses kinetic energy?

Answers

i belive that the answer is b. 

How many neutrons does element X have if its atomic number is 36 and its mass number is 74?

Answers

The atomic number Z of an element is the number of protons it contains (and in an atom it is equal to the number of electrons). The mass number M is close to the mass of one mol of the substance but it is defined as the number of protons and neutrons in the nucleus of the atom; there, the main mass of the atom is contained. Hence, N=M-Z=74-36=38(since M counts both protons and neutrons while Z only protons). Thus, it has 38 neutrons.

There are a truly enormous number of neutrons in any sample of Element X.

Why, EVERY ATOM of Element X has 38 of them in its nucleus !

which group in the periodic table is known as salt farmers?

carbon family

copper family

helium family

halogen family

Answers

Which group in the periodic table is known as salt formers?

 The correct option is the last one: Halogen family.

 You can find the halogen or "salt formers" in the group 17 of the periodic table. These are:

 - Fluorine.
 -Chlorine.
 - Bromine.
 - Iodine.
 - Astatine.

 All of them are non-metallic elements and they have 7 electrons.

The group in the periodic table known as salt farmers is the halogen family, which consists of fluorine, chlorine, bromine, iodine, and astatine.

The group in the periodic table known as salt farmers is the halogen family. The term 'halogen' comes from Greek roots meaning 'salt forming.' This group consists of the elements fluorine, chlorine, bromine, iodine, and astatine, which are all found in Group 17 of the periodic table. They react readily with metals to form salts, such as sodium chloride (table salt) and calcium chloride (road salt).

Halogens are known for forming compounds with metals to create salts.These elements are very reactive and can be found in Group 17.Examples of halogen compounds include sodium chloride (NaCl) and calcium chloride (CaCl₂).

In contrast, the carbon family (Group 14), the copper family (transition elements), and the helium family (noble gases) do not have these properties.

Degausser creates a magnetic field that erases data from magnetic storage media.
a. True
b. False

Answers

The Answer is A. It's true.

What is the magnitude of the electric force on an electron in a uniform electric field of strength 2050 n/c that points due east?

Answers

given E=2050 N/C

charge of an electron = 1.6×10^-19 C

USING E = F/Q , electric field = force ÷ charge

2050 = F ÷ (1.6×10^-19)....

make F subject of formula and get the answer 

In a cathode ray tube, the number of electrons that reach the fluorescent screen is controlled by the A. cathode. B. anode. C. grid. D. deflecting plate.

Answers

A. cathode
Best guess

Answer:

C) The answer is grid .

Explanation:

Grid lies between cathode and anode with varying volts . It controls the no of

electrons reaching screen. It is kept closer to cathode which emits electrons.There may be more than one control grid.  

What voltage would be measured across the 45 ohm resistor?

Answers

You would find the potential difference aka voltage, but more specifically it would be just the voltage that the resistor uses and not the whole circuit.

But if you want the voltage value it’s V=IR so whatever the current is multiply it by the 45 ohm resistor value

Answer:

C) 9.0 volts

Explanation:

Which correctly lists the outer planets from the least number of moons to the greatest number of moons?

a)Neptune, Uranus, Jupiter, Saturn
b)Saturn, Jupiter, Uranus, Neptune
c)Jupiter, Neptune, Uranus, Saturn
d)Uranus, Neptune, Jupiter, Saturn

Answers

There are two planets with no moons, Mercury and Venus. After that the order is Earth (1), Mars (2), Neptune (14), Uranus (27), Saturn (62), and Jupiter (67).

so its A

d) Uranus, Neptune, Jupiter, Saturn

Hope this helped!

Four wires meet at a junction. it is assumed that two currents, i1 and i4, enter the node. an ammeter records a value of +4a for i1. currents i2 and i3 are travelling out of the node. i2 has 3a running through it, and i3 has 0.5 a running through it. what is the current in i4?

Answers

Kirchhoff’s Current Law states that sum of entering currents is equal to sum of exiting currents.
[tex] I_{IN} = I_{OUT} [/tex]

We are given information:
[tex] I_{1} = 4A \\ I_{2} = 3A \\ I_{3} =0.5A \\ I_{4} = ?[/tex]

Kirchhoff’s Current Law for our example is:
[tex] I_{1} + I_{4} = I_{2} + I_{3} [/tex]
[tex] 4 + x = 3 + 0.5 [/tex]
[tex] 4 + x = 3.5 [/tex]
[tex] x = -0.5A [/tex]

We got negative value for current. This means that current I₄ is not entering but it is leaving from the junction.

The force due to gravity between two objects can be described using the equation fg = g m1 m2 / d2. according to this equation, if the distance between two objects increases, what happens to the gravitational force between them?

Answers

If the distance between the two object increases, then the force between them decreases.
In fact, the formula is
[tex]F=G \frac{m_1 m_2}{d^2} [/tex]
we can see that the distance d is at the denominator, therefore when d increases, the value of the fraction decreases, and so the gravitational force F decreases as well.

Increasing the distance between two objects decreases the gravitational force between them because the force is inversely proportional to the square of the distance.

According to the equation fg = G m1 m2 / d2, when examining the gravitational force (fg) between two objects, we look at two key factors: the product of their masses (m1 and m2) and the square of the distance between them (d2). The gravitational force is directly proportional to the product of their masses, meaning if the masses increase, the force increases. However, it is inversely proportional to the square of the distance between them, meaning if the distance (d) increases, the gravitational force decreases.

To illustrate this principle, if the distance between two objects is increased, the gravitational force between them decreases. This is because the force diminishes with the square of the distance increase, which is demonstrated by the 1/d2 factor in the equation. For example, if you increase the distance by a factor of 3, the gravitational force would decrease by a factor of 32 (or 9).

Therefore, as the distance between two objects increases, the gravitational force between them will indeed decrease, highlighting the importance of distance when considering gravitational interactions.

A gas has a volume of 300 ml at 300 kpa. what will its volume be if the pressure is changed to 600 kpa?

Answers

I believe that it is 140 mL.

Suppose a star the size of our Sun, but of mass 8.0 times as great, were rotating at a speed of 1.0 revolution every 12 days. If it were to undergo gravitational collapse to a neutron star of radius 12 km, losing 3/4 of its mass in the process, what would its rotation speed be? Assume the star is a uniform sphere at all times.

(a) Assume that the thrown-off mass carries off no angular momentum, in rev/s

(b) Assume that the thrown-off mass carries off its proportional share (3/4) of the initial angular momentum, in rev/s

Answers

You have two different phases of the star: 1 the Sun-like phase and 2 the neutron star phase. The given quantities are:
r₁ = r(Sun) = 695700km
m₁ = 8 Msun
f₁ = 1 rev / 12 days
m₂ = [tex] \frac{1}{4} [/tex]·m₁

First thing, you need to transform the frequency in units of revolution/seconds
f₁ = 1 rev / (12·24·60·60) = 1 rev / 1036800 s

and then into angular velocity through the formula
ω₁ = 2πf = 6.06E-6 rad/s

a) If the angular momentum stays the same: L₁ = L₂
where L = I·ω    
and the momentum of inertia I is given by I = m·r²

Therefore, substituting we have:
m₁·r₁²·ω₁ = m₂·r₂²·ω₂

And we can find:

ω₂ = [tex] \frac{r1²w1}{0.25r2²} [/tex]

(remember m₂=[tex] \frac{1}{4} [/tex]·m₁ so we can cancel out the two m₁)

We obtain:
ω₂ = (695700²·6.06E-6)/(0.25·12²) = 81473.1 rad/s

we can transform it back into frequency:
f₂ = ω₂/2π = 1 rev / 12967 s = 7.7e-5 rev/s

b) If L₂ = [tex] \frac{1}{4} [/tex]·L₁
we do expect an angular velocity 4 times smaller.
Using the same formulas as above:

[tex] \frac{1}{4} [/tex]·m₁·r₁²·ω₁ = [tex] \frac{1}{4} [/tex]·m₁·r₂²·ω₂

ω₂ = [tex] \frac{r1²w1}{r2²} [/tex] =
     = [(695700²·6.06E-6)(12²) = 20368 rad/s

and 

f₂ = 1 rev / 3242 s = 3.08e-4 rev/s



(a) The final angular velocity [tex](\(\omega_2\))[/tex] of the neutron star is approximately [tex]\(1.42 \times 10^{-5}\)[/tex] rad/s.

(b) The final angular velocity [tex](\(\omega_2'\))[/tex] of the neutron star is approximately [tex]\(3.54 \times 10^{-6}\)[/tex] rad/s.

**(a) Assume that the thrown-off mass carries off no angular momentum:**

1. Calculate the initial moment of inertia [tex](\(I_1\)):[/tex]

[tex]\[I_1 = \frac{2}{5} \cdot (8 \cdot \text{mass of the Sun}) \cdot (\text{radius of the Sun})^2\][/tex]

  The mass of the Sun is approximately [tex]\(2 \times 10^{30}\)[/tex] kg, and the radius of the Sun is approximately 6.96 x [tex]10^8[/tex] meters. Calculate [tex]\(I_1\): \[I_1 = \frac{2}{5} \cdot (8 \times 2 \times 10^{30} \text{ kg}) \cdot (6.96 \times 10^8 \text{ m})^2\][/tex]

  This gives [tex]\(I_1 \approx 3.06 \times 10^{40}\) kg m^2.[/tex]

2. Calculate the initial angular velocity [tex](\(\omega_1\)):[/tex]

  The rotation period is 12 days, which is equivalent to [tex]\(12 \times 24 \times 60 \times 60\)[/tex] seconds. Calculate

[tex]\(\omega_1\): \[\omega_1 = \frac{2\pi}{12 \times 24 \times 60 \times 60} \text{ rad/s}\][/tex]

  This gives [tex]\(\omega_1 \approx 1.99 \times 10^{-7}\) rad/s.[/tex]

3. Calculate the initial angular momentum [tex](\(L_1\)): \[L_1 = I_1 \cdot \omega_1 = (3.06 \times 10^{40}\, \text{kg·m²}) \cdot (1.99 \times 10^{-7}\, \text{rad/s})\][/tex]

  This gives [tex]\(L_1 \approx 6.11 \times 10^{33}\) kg m^2/s.[/tex]

4. Calculate the final moment of inertia [tex](\(I_2\)):[/tex]

  The final radius of the neutron star is 12 km, which is equivalent to 12,000 meters. Calculate [tex]\(I_2\):[/tex]

[tex]\[I_2 = \frac{2}{5} \cdot (3/4 \cdot \text{mass of the Sun}) \cdot (12,000 \text{ m})^2\] \[I_2 = \frac{2}{5} \cdot (3/4 \cdot 2 \times 10^{30}\, \text{kg}) \cdot (12,000\, \text{m})^2\][/tex]

  This gives [tex]\(I_2 \approx 4.32 \times 10^{38}\)[/tex] kg·m².

5. Use the conservation of angular momentum [tex](\(L_1 = L_2\))[/tex] to find the final angular momentum [tex](\(L_2\)): \[L_2 = L_1 = 6.11 \times 10^{33}\, \text{kg·m²/s}\][/tex]

6. Calculate the final angular velocity [tex](\(\omega_2\))[/tex] of the neutron star:

[tex]\[\omega_2 = \frac{L_2}{I_2} = \frac{6.11 \times 10^{33}\, \text{kg·m²/s}}{4.32 \times 10^{38}\, \text{kg·m²}}\][/tex]

  This gives [tex]\(\omega_2 \approx 1.42 \times 10^{-5}\)[/tex] rad/s.

**(b) Assume that the thrown-off mass carries off its proportional share (3/4) of the initial angular momentum:**

1. Calculate the final angular momentum [tex](\(L_2'\))[/tex] considering that 3/4 of the initial angular momentum is carried away by the mass that is thrown off during the collapse:

[tex]\[L_2' = (1 - \frac{3}{4}) \cdot L_1 = (1 - 0.75) \cdot 6.11 \times 10^{33}\, \text{kg·m²/s}\][/tex]

  This gives [tex]\(L_2' \approx 1.53 \times 10^{33}\, \text{kg·m²/s}\).[/tex]

2. Calculate the final angular velocity [tex](\(\omega_2'\))[/tex] of the neutron star:

[tex]\[\omega_2' = \frac{L_2'}{I_2} = \frac{1.53 \times 10^{33}\, \text{kg·m²/s}}{4.32 \times 10^{38}\, \text{kg·m²}}\][/tex]

  This gives [tex]\(\omega_2' \approx 3.54 \times 10^{-6}\)[/tex] rad/s.

To know more about angular velocity:

https://brainly.com/question/31974800

#SPJ3

Which statement accurately compares the weight of an object on these two planets

Answers

"An object weighs about two times as much on Jupiter as on Neptune." Hope this helps :)

If an element has 10 electrons, how many of them will be in the 2nd energy level?

Answers

At the second electron there will be 15 electron and if it has 10 proton it will have 20 electron. Hope u enjoy your grade!

Answer:

If an element has 10 electrons, 8 of them will be in the second energy level.

Explanation:

There are 7 energy levels, numbered from 1 to 7, and in which electrons are distributed, logically in order according to their energy level.

Each level is divided into sub-levels. These sub-levels into which each level is divided can be up to 4, which are called: s, p, d, f. In the sub-level s there can only be a maximum of 2 electrons, in p there can be a maximum of 6 electrons, in the sub-level d 10 electrons and finally in the sub-level f there can be a maximum of 14 electrons.

In level 1 there is only one sub-level, which will be the s. In level 2 there are 2 sub-levels, the s and the p. At level 3 there are 3 sub-levels s, p and d. And at level 4 there are 4 sub-levels, the s, the p, the d and the f.

Then, in level 1 there is only a maximum two electrons. In level 2 there are a maximum of 8 electrons. At level 3 there are a maximum of 18 electrons. And at level 4 there are a maximum of 32 electrons.

The filling of the orbitals occurs in increasing order of energy, that is, from the orbitals of lower energy to those of higher energy.

So, considering that at level 1 there can only be two electrons and that it is the lowest energy level, 2 of the 10 electrons that the element has will be located at that level. So 8 electrons remain to be located.

The next level to fill with electrons is 2. As this level can enter a maximum of 8 electrons, the electrons that remained to be located in level 1 will be located in level 2.

If an element has 10 electrons, 8 of them will be in the second energy level.

2. Lower latitudes tend to have __________. (Points : 1)
lower average temperatures than higher latitudes
the same temperatures as higher latitudes
higher average temperatures than higher latitudes
you can't compare temperatures without including pressure data

Answers

Option c. higher average temperatures than higher latitudes
 Explanation:
 Lower latitudes are also called tropics which is the area of the globe which lies in 0 to 30 degrees of the equator. The region nearer to the equator is hotter as it is direct to the rays of the sun and higher latitudes (60 to 90 degrees) is the polar region which are the regions away from the equator and this the sun's rays falls slantly on those regions and they experience cold temperature whereas tropical region is warmer.

Answer:

Higher average temperatures then higher latitudes. I TOOK THE TEST!

Explanation:

Starting the moon's cycle with the new moon phase, what phase will it be in after about a week?

Answers

The waxing crescent moon I believe 

Jessie draws a ray diagram to show how an image of a candle is produced by a concave mirror when the candle is placed in front of the center of curvature. Jessie thinks the image should be virtual and behind the mirror.
Which best describes Jessie’s error?

The object should be placed anywhere on the principal axis.
The object should be at the center of the curvature.
The object should be between the center and vertex.
The object should be between the focal point and vertex.

Answers

There are two rules of reflection for the concave mirror:
1)Any incident ray traveling parallel to the principal axis on the way to the mirror will pass through the focal point upon reflection.
2)Any incident ray passing through the focal point on the way to the mirror will travel parallel to the principal axis upon reflection.
Also, keep in that for concave mirror center of curvature is 2f.
Using these two rules we can construct the image. 
You should always use these two "special" rays, I will mark then 1 and 2 on the picture.
From the picture, we can see that if you place the object between the focus and vertex you get the virtual image.
The answer is: object should be between the focal point and the vertex

On Edge, the answer is D.

A current of 12 amps is measured in a circuit with a total resistance of 9.0 ohms. What is the size of the voltage source that supplies this circuit?

a. 108 volts
b. 21 volts
c. 1.3 volts
d. 0.75 volts

Answers

a. 108 volts is the answer.
A 108 volts is the answer! I had to check to be sure :) Brainest?

A __________ sign on a truck means that the load on the truck is potentially dangerous.

Answers

The answer is:
diamond-shaped

A hazardous sign on a truck means that the load on the truck is potentially dangerous.

A hazardous sign on a truck means that the load on the truck is potentially dangerous. These signs are part of a system of hazard communication that includes symbols, labels, and placards to quickly and effectively convey information about the hazards of the materials being transported. The use of such signs is essential for the safety of everyone on the road, including the truck driver, other motorists, emergency responders, and the general public. It helps to ensure that appropriate precautions are taken when handling, transporting, and in the event of an accident involving, these materials.

The pH of acid rain would be _____. greater than 7 less than 7 exactly 7 exactly 14

Answers

Less than 7, Ph of 7 is neutral Acid Rain would be between 4 and 0. 

Answer:

Less than 7.

Explanation:

pH scale in chemistry is used to measure the concentration of hydrogen ion. In other words, it is used to measure the extent of acidity or alkalinity of any solution. The pH scale having numbers that range from 0 to 14. The acidic solution has a lower pH value while the basic solution has a higher pH. The pH value of pure water is 7.

As the name implies acid rain, it is formed by the combination of sulfur and nitrogen oxides. The pH of acid rain is less than 7. Typically its value is 4.  

A diver with a mass of 70.0 kg stands motionless at the top of a diving platform 3.0 m high. The diver’s initial vertical speed is zero. What is the diver’s potential energy relative to the water surface?

Answers

The answer is 2,058J. 

You can solve for the potential energy using the formula:

[tex]PE=mgh[/tex]

Where:
PE= potential energy
m= mass
g= 9.8m/s² (This is constant. This is acceleration due to gravity because the diver is positioned above the surface of the Earth.)
h= height

The given in your problem are the following:
m = 70kg
h = 3.0 m
g = 9.8m/s² (Again this is constant)

Just plug in your given in the formula and solve:
[tex]PE=mgh[/tex]
           [tex]=(70kg)(9.8m/s^{2})(3.0m)[/tex]
           [tex]=2,058kg.m^{2}/s^{2} or 2,058J[/tex]

Final answer:

The diver's potential energy relative to the water surface, calculated using the formula PE = mgh with given values, is 2058 Joules.

Explanation:

To calculate the diver's potential energy relative to the water surface, we use the formula for gravitational potential energy, which is PE = mgh, where PE is the potential energy, m is the mass of the object, g is the acceleration due to gravity (approximately 9.8 m/s2), and h is the height above the reference point (in this case, the water surface).

Given a diver with a mass of 70.0 kg standing 3.0 m high above the water, the calculation would be as follows:

PE = (70.0 kg) * (9.8 m/s2) * (3.0 m) = 2058 Joules.

Therefore, the diver's potential energy relative to the water surface is 2058 Joules.

What will happen if you rub two different materials together?

Answers

it will cause heat from friction
Sometimes, electrons can also be tranferred

When an object is moving with uniform circular motion, the centropetal acceleration of the object?

Answers

Yes this is possible if the speed is changing. An object moves in a circular path at a constant speed. I hope this helps my friend.

Answer:

The correct answer is "is directed toward the center of motion".

Explanation:

When an object moves in a uniform circular motion, the centrifugal acceleration of the object is directed toward the center of the motion. This acceleration is the only acceleration of the object experiences when it has constant velocity on a circular path. This causes the body to be attracted to the center of the trajectory by a centripetal force that prevents the body from entering a rectilinear trajectory.

Have a nice day!

How are ocean ridges formed

Answers

The answer is divergent boundaries.
I hope this helps you!
Hello,

The answer is option B "divergent boundaries".

Reason:

Ocean ridges are formed by divergent boundaries which are boundaries the pull away from each other which allows the magma ti rise therefore making a ocean ridge which is why your answer is option B!

If you need anymore help feel free to ask me!

Hope this helps!

~Noportrit

This is a large, rocky body found in space. It often orbits the sun in a belt between Mars and Jupiter.

Answers

Final answer:

Asteroids are rocky bodies in space that mostly orbit the Sun within the asteroid belt, located between Mars and Jupiter. They vary in size and are classified by composition as C-type, S-type, or M-type. The largest asteroid and dwarf planet in this belt is Ceres.

Explanation:

The large, rocky bodies that are often found orbiting the sun in a belt between Mars and Jupiter are known as asteroids. The region where most asteroids are found is called the asteroid belt, and this area extends from 2.2 to 3.3 AU from the Sun. Asteroids are mainly remnants of the initial solar system that existed before the planets formed, ranging from a few centimeters to hundreds of kilometers in size. While most asteroids reside within the asteroid belt, they are spread out with significant empty space between them, making navigation for spacecraft like Galileo and Cassini feasible.

Asteroids are classified into different types: C-type (carbonaceous), S-type (stony), and M-type (metallic). The largest known asteroid is Ceres, which is also classified as a dwarf planet. Understanding asteroids is important for planetary defense as well as for exploring the solar system's past.

How does the usable form of nitrogen enter our bodies?

A.)by breathing in air
B.)by consuming plants
C.)by consuming water
D.)by burning fuel

Answers

Answer: B.)by consuming plants

Explanation:

There is about 78% nitrogen is available in the atmosphere. But living beings such as plants does not absorb it directly from the air. Instead they absorb the compounds of nitrogen from the soil. The soil bacteria convert the nitrogen oxides into ammonia, nitrates and nitrites in the soil in this way these bacteria fix atmospheric nitrogen into the soil. The plants absorb these forms of nitrogen, which are essentially required for the synthesis of proteins and nucleic acids. Nitrogen as an element becomes essential ingredients in all biomolecules. We humans and animals eat plants and through them the usable form of nitrogen in the form of biomolecules enters the body.

Answer:

the correct answer is B. by consuming plants

Explanation:

Other Questions
Last summer, Mike received a tip from 35% of his babysitting customers. If he had 20 customers, how many customers gave Mike a tip? PLEASE HELP! What is the area of triangle BCD in exact form? 35 points! Your friend lonie tends to talk a lot, often ignoring what you have to say; in fact, she often focuses the conversation on her own issues, problems, and interests. what type of listening is she displaying? PLEASE HELP ME ON THIS....thx The break-down of complex molecules into simpler ones is called Despite conventional thinking, __________ accounts for the bulk of promotional spending in many firms. this is especially true for firms selling consumer products in grocery stores and mass-merchandise retailers. advertising publicity sales promotion public relations personal selling What is the difference of the two polynomials?(7y2 + 6xy) (2xy + 3) A major factor in the shift in american foreign policy towards imperialism in the late nineteenth century was the The perimeters of two similar quadrilaterals are 48 cm and 60 cm, respectively. If the area of the smaller quadrilateral is 96 cm2, find the area of the larger quadrilateral. Identify the controlling idea of the following topic sentence. "Applying for admission to only one college is a big mistake."A. applying for admission to only one college B. is a big mistake C. college is a big mistake D. to only one college The civil rights movement began in the 1950s and was led in large part by Which of these best illustrates a strong claim?A. The Bill of Rights consists of the first ten amendments to the Constitution.B. All of the amendments in the Bill of Rights are essential to democratic freedom, including the unpopular ones.C. The freedoms protected by the Bill of Rights are important to all citizens of the United States.D. The Bill of Rights has become an important symbol of freedom and democracy around the world. The stage theory of memory suggests that there are ______ stages. Peter and Paul both had a great influence on the early church. True False Mahailey and I will never be quite up-to-date, Ralph. Were old-fashioned, and I dont know but youd better let us be. Which idea is conveyed through these sentences? A. People often resist change. B. Some people enjoy hard work. C. One must be persistent to be persuasive. D. Advances in technology yield positive results. daniel is standing 100ft from a tower and sees a bird land on top of the tower. if the angle of elevation from daniel to the top is 84.6, how tall is the tower Three times the number of blue marbles exceeds twice the number of red marbles by 18 also 5 times the number of blue marbles is 2 less than 6 times the number of red marbles how many of each are there?Will give brainliest please answer quickly find the surface of the area of the rectangular prism 16m 5m 14m How many unpaired electrons does niobium have Who was Machiavelli and why was he significant in the Florentine Republic?