What is the maximum speed at which a car could safely negotiate a curve on a highway, if the radious of the curve is 250 m and the coefficient of friction is 0.4? Give the answer in meter/sec.

1) Time: 2 s, 6 s

The position of the particle is given by:

[tex]x=t^3 -12t^2 +36t+32[/tex]

where t is the time in seconds and x is the position in feet.

The velocity of the particle can be found by differentiating the position:

[tex]v(t)=x'(t)=3t^2 -24t+36[/tex]

and it is expressed in ft/s.

In order to find the time at which the velocity is v=0 ft/s, we substitute v=0 into the previous equation:

[tex]0=3t^2-24t+36\\0=t^2 -8t+12\\0=(t-2)(t-6)[/tex]

So the two solutions are

t = 2 s

t = 6 s

2) Position: x = 64 ft and x = 32 ft

The position at which the velocity of the particle is v = 0 can be found by susbtituting t = 2 and t = 6 into the equation for the position.

For t = 2 s, we have

[tex]x=(2)^3-12(2)^2 +36(2)+32=64[/tex]

For t = 6 s, we have

[tex]x=(6)^3-12(6)^2 +36(6)+32=32[/tex]

So the two positions are

x = 64 ft

x = 32 ft

3) Acceleration: [tex]-12 ft/s^2[/tex] and [tex]+12 ft/s^2[/tex]

The acceleration of the particle can be found by differentiating the velocity. We find:

[tex]a(t)=v'(t)=6t-24[/tex]

And substituting t = 2 and t = 6, we find the acceleration when the velocity of the particle is zero:

[tex]a(2)=6(2)-24=-12[/tex]

[tex]a(6)=6(6)-24=12[/tex]

So the two accelerations are

[tex]a=-12 ft/s^2[/tex]

[tex]a=12 ft/s^2[/tex]

The time, position, and acceleration of the particle when v = 0 ft/s are t = 2 s and t = 6 s, x = 24 ft and x = 184 ft, and a = -12 ft/s² and a = 12 ft/s².

To find the time, position, and acceleration of the particle when the velocity is 0 ft/s, we need to determine the values of t, x, and a when v = 0.

Given the relation x = t³ - 12t² + 36t + 32, we need to solve for t when v = 0. We can use the equation v = dx/dt to find the velocity function and set it equal to 0.

By differentiating x with respect to t, we get v = 3t² - 24t + 36. Setting v = 0, we can solve the quadratic equation 3t² - 24t + 36 = 0 to find the values of t. The solutions are t = 2 and t = 6.

Therefore, when v = 0, the time is t = 2 s and t = 6 s. We can substitute these values into the position function to find the corresponding positions. When t = 2 s, x = (2)³ - 12(2)² + 36(2) + 32 = 24 ft. When t = 6 s, x = (6)³ - 12(6)² + 36(6) + 32 = 184 ft.

To find the acceleration, we can differentiate the velocity function with respect to t. By differentiating v = 3t² - 24t + 36, we get a = 6t - 24. Substituting t = 2 s and t = 6 s into this equation, we get a = 6(2) - 24 = -12 ft/s² and a = 6(6) - 24 = 12 ft/s².

https://brainly.com/question/35290501

#SPJ3

Answer:

Explanation:

As the dielectric is inserted between the plates of a capacitor, the capacitance becomes K times and the electric field between the plates becomes 1 / K times the original value. Where, K be the dielectric constant.

Answer:

a) Total displacement  = 3986.54 m

b) Average speeds

      Leg 1 ->  11.22 m/s

      Leg 2 ->  22.44 m/s

      Leg 3 ->  11.20 m/s

      Complete trip ->  21.63 m/s

Explanation:

a) Leg 1:

Initial velocity, u =  0 m/s

Acceleration , a = 2.04 m/s²

Time, t = 11 s

We have equation of motion s= ut + 0.5 at²

Substituting

   s= ut + 0.5 at²

    s = 0 x 11 + 0.5 x 2.04 x 11²

    s = 123.42 m

Leg 2:

We have equation of motion v = u + at

Initial velocity, u =  0 m/s

Acceleration , a = 2.04 m/s²

Time, t = 11 s

Substituting

   v = 0 + 2.04 x 11 = 22.44 m/s

We have equation of motion s= ut + 0.5 at²

Initial velocity, u =  22.44 m/s

Acceleration , a = 0 m/s²

Time, t = 2.85 min = 171 s

Substituting

   s= ut + 0.5 at²

    s = 22.44 x 171 + 0.5 x 0 x 171²

    s = 3837.24 m

a) Leg 3:

Initial velocity, u =  22.44 m/s

Acceleration , a = -9.73 m/s²

Time, t = 2.31 s

We have equation of motion s= ut + 0.5 at²

Substituting

   s= ut + 0.5 at²

    s = 22.44 x 2.31 + 0.5 x -9.73 x 2.31²

    s = 25.88 m

Total displacement = 123.42 + 3837.24 + 25.88 = 3986.54 m

Average speed is the ratio of distance to time.

b) Leg 1:

        [tex]v_{avg}=\frac{123.42}{11}=11.22m/s[/tex]

 Leg 2:

        [tex]v_{avg}=\frac{3837.24}{171}=22.44m/s[/tex]

Leg 3:

        [tex]v_{avg}=\frac{25.88}{2.31}=11.20m/s[/tex]

Complete trip:

        [tex]v_{avg}=\frac{3986.54}{11+171+2.31}=21.63m/s[/tex]

Explanation:

It is given that,

Frequency of monochromatic light, [tex]f=5\times 10^{14}\ Hz[/tex]

Separation between slits, [tex]d=2.2\times 10^{-5}\ m[/tex]

(a) The condition for maxima is given by :

[tex]d\ sin\theta=n\lambda[/tex]

For third maxima,

[tex]\theta=sin^{-1}(\dfrac{n\lambda}{d})[/tex]

[tex]\theta=sin^{-1}(\dfrac{n\lambda}{d})[/tex]

[tex]\theta=sin^{-1}(\dfrac{nc}{fd})[/tex]  

[tex]\theta=sin^{-1}(\dfrac{3\times 3\times 10^8\ m/s}{5\times 10^{14}\ Hz\times 2.2\times 10^{-5}\ m})[/tex]  

[tex]\theta=4.69^{\circ}[/tex]

(b) For second dark fringe, n = 2

[tex]d\ sin\theta=(n+1/2)\lambda[/tex]

[tex]\theta=sin^{-1}(\dfrac{5\lambda}{2d})[/tex]

[tex]\theta=sin^{-1}(\dfrac{5c}{2df})[/tex]

[tex]\theta=sin^{-1}(\dfrac{5\times 3\times 10^8}{2\times 2.2\times 10^{-5}\times 5\times 10^{14}})[/tex]

[tex]\theta=3.90^{\circ}[/tex]

Hence, this is the required solution.

(a) The angle of the third bright fringe (θ₃) is approximately 4.69 degrees (b) The angle of the second dark fringe (θ₂) is approximately 3.90 degrees.

To solve this problem, we can use the formula for the angles of the maxima and minima in a Double-Slit Experiment diffraction pattern. For the third bright fringe, the condition for constructive interference is given by:

[tex]\[ d \sin(\theta_m) = m \lambda \][/tex]

where:

- d is the slit separation,

- [tex]\( \theta_m \)[/tex] is the angle of the mth bright fringe,

- m is the order of the fringe

- λ is the wavelength of the light.

For the second dark fringe, the condition for destructive interference is given by:

[tex]\[ d \sin(\theta_n) = \left( n + \frac{1}{2} \right) \lambda \][/tex]

where:

- [tex]\( \theta_n \)[/tex] is the angle of the nth dark fringe,

- n is the order of the dark fringe

Given that the frequency f is related to the wavelength λ by the speed of light (c) as c = fλ, we can express λ in terms of f.

Part (a): Third Bright Fringe

[tex]\[ d \sin(\theta_m) = m \lambda \][/tex]

[tex]\[ \sin(\theta_3) = \frac{3 \lambda}{d} \][/tex]

[tex]\[ \sin(\theta_3) = \frac{3 c}{d f} \][/tex]

[tex]\[ \theta_3 = \sin^{-1}\left(\frac{3 c}{d f}\right) \][/tex]

Part (b): Second Dark Fringe

[tex]\[ d \sin(\theta_n) = \left( n + \frac{1}{2} \right) \lambda \][/tex]

[tex]\[ \sin(\theta_2) = \frac{(2 + 0.5) \lambda}{d} \][/tex]

[tex]\[ \sin(\theta_2) = \frac{2.5 c}{d f} \][/tex]

[tex]\[ \theta_2 = \sin^{-1}\left(\frac{2.5 c}{d f}\right) \][/tex]

Now, plug in the values:

Given:

- [tex]\( d = 2.20 \times 10^{-5} \)[/tex] m,

- [tex]\( f = 5.00 \times 10^{14} \)[/tex] Hz,

- [tex]\( c = 3.00 \times 10^8 \)[/tex] m/s,

- m = 3,

- n = 2.

[tex]\[ \theta_3 = \sin^{-1}\left(\frac{3 \times 3.00 \times 10^8}{2.20 \times 10^{-5} \times 5.00 \times 10^{14}}\right) \][/tex]

[tex]\[ \theta_3 \approx 4.69^\circ \][/tex] (rounded to two decimal places, as given)

[tex]\[ \theta_2 = \sin^{-1}\left(\frac{2.5 \times 3.00 \times 10^8}{2.20 \times 10^{-5} \times 5.00 \times 10^{14}}\right) \][/tex]

[tex]\[ \theta_2 \approx 3.90^\circ \][/tex] (rounded to two decimal places, as given)

So, the correct answers are indeed [tex]\( \theta_3 \approx 4.69^\circ \)[/tex] for part (a) and [tex]\( \theta_2 \approx 3.90^\circ \)[/tex] for part (b).

Learn more about Double-Slit Experiment here:

https://brainly.com/question/28108126

#SPJ6

Answer:

The magnitude of the magnetic field inside the solenoid is [tex]7.3\times10^{-3}\ T[/tex].

Explanation:

Given that,

Length = 81.0 cm

Radius = 1.70 cm

Number of turns = 1300

Current = 3.60 A

We need to calculate the magnetic field

Using formula of magnetic field inside the solenoid

[tex]B =\mu nI[/tex]

[tex]B =\mu\dfrac{N}{l}I[/tex]

Where, [tex]\dfrac{N}{l}[/tex]=Number of turns per unit length

I = current

B = magnetic field

Put the value into the formula

[tex]B =4\pi\times10^{-7}\times\dfrac{1300}{81.0\times10^{-2}}\times3.60[/tex]

[tex]B = 7.3\times10^{-3}\ T[/tex]

Hence, The magnitude of the magnetic field inside the solenoid is [tex]7.3\times10^{-3}\ T[/tex].

Answer:

h = 3.10 m

Explanation:

As we know that after each bounce it will lose its 11% of energy

So remaining energy after each bounce is 89%

so let say its initial energy is E

so after first bounce the energy is

[tex]E_1 = 0.89 E[/tex]

after 2nd bounce the energy is

[tex]E_2 = 0.89(0.89 E)[/tex]

After third bounce the energy is

[tex]E_3 = (0.89)(0.89)(0.89)E[/tex]

here initial energy is given as

[tex]E = mgH_o[/tex]

now let say final height is "h" so after third bounce the energy is given as

[tex]E_3 = mgh[/tex]

now from above equation we have

[tex]mgh = (0.89)(0.89)(0.89)(mgH)[/tex]

[tex]h = 0.705H[/tex]

[tex]h = 0.705(4.4 m)[/tex]

[tex]h = 3.10 m[/tex]

Answer:

49.07 miles

Explanation:

Angle between two ships = 110° = θ

First ship speed = 22 mph

Second ship speed = 34 mph

Distance covered by first ship after 1.2 hours = 22×1.2 = 26.4 miles = b

Distance covered by second ship after 1.2 hours = 34×1.2 = 40.8 miles = c

Here the angle between the two sides of a triangle is 110° so from the law of cosines we get

a² = b²+c²-2bc cosθ

⇒a² = 26.4²+40.8²-2×26.4×40.8 cos110

⇒a² = 2408.4

⇒a = 49.07 miles

Answer:

[tex]L = 9.42 kg m^2/s[/tex]

Explanation:

Angular speed of the cylinder is given as

[tex]f = 1500 rpm[/tex]

[tex]f = 1500 round/60 s[/tex]

[tex]\omega = 2\pi f[/tex]

[tex]\omega = 2\pi(25) = 50 \pi[/tex]

now moment of inertia of the cylinder is given as

[tex]I = \frac{1}{2}mR^2[/tex]

[tex]I = \frac{1}{2}(3)(0.2)^2[/tex]

[tex]I = 0.06 kg m^2[/tex]

now we have

[tex]L = I\omega[/tex]

[tex]L = (0.06)(50\pi)[/tex]

[tex]L = 9.42 kg m^2/s[/tex]

The equivalent resistance of the combination is 15 ohm. Option C is correct.

Resistance is a type of opposition force due to which the flow of current is reduced in the material or wire. Resistance is the enemy of the flow of current.

Case 1: Two 20 ohm resistors are connected in parallel;

[tex]\rm \frac{1}{R_{eq}_1} =\frac{1}{R_1} +\frac{1}{R_2} \\\\ \rm \frac{1}{R_{eq}_1} =\frac{1}{20} +\frac{1}{20} \\\\ R_{eq}_1}= 10 \ ohm[/tex]

Case 2: Two 10-ohm resistors are connected in parallel.

[tex]\rm \frac{1}{R_{eq}_2} =\frac{1}{R_1} +\frac{1}{R_2} \\\\ \rm \frac{1}{R_{eq}_2} =\frac{1}{10} +\frac{1}{10} \\\\ R_{eq}_2}= 5 \ ohm[/tex]

Case 3; Two combinations are connected in series.

[tex]\rm R= R_{eq_1}+R_{eq_2}\\\\ \rm R= 10+ 5 \\\\ R=15 \ ohm[/tex]

The equivalent resistance of the combination is 15 ohm.

Hence, option C is correct.

To learn more about the resistance refer to the link;

https://brainly.com/question/20708652

#SPJ1

Final answer:

Two 20 ohm resistors in parallel have an equivalent resistance of 10 ohms, two 10 ohm resistors in parallel have an equivalent resistance of 5 ohms. When these two combinations are connected in series, the total equivalent resistance is the sum of both, which is c) 15 ohms.

Explanation:

To find the equivalent resistance of the given combinations of resistors, we first need to understand how resistors combine in parallel and in series.

When resistors are in parallel, the reciprocal of the equivalent resistance is the sum of the reciprocals of the individual resistances:

Req = 1 / (1/R1 + 1/R2)

For two 20 ohm resistors in parallel:

Req = 1 / (1/20 + 1/20) = 1 / (2/20) = 10 ohms

For two 10 ohm resistors in parallel:

Req = 1 / (1/10 + 1/10) = 1 / (2/10) = 5 ohms

When we have resistors in series, their resistances simply add up:

Rtotal = Req1 + Req2

So, for the 10 ohm equivalent and the 5 ohm equivalent resistors in series:

Rtotal = 10 ohms + 5 ohms = 15 ohms

Therefore, the correct answer to the student's question is (c) 15 Ohm.

Answer:

The kinetic energy of an electron is [tex]1.54\times10^{-15}\ J[/tex]

Explanation:

Given that,

Distance = 0.1 nm

We need to calculate the momentum

Using uncertainty principle

[tex]\Delta x\Delta p\geq\dfrac{h}{4\pi}[/tex]

[tex]\Delta p\geq\dfrac{h}{\Delta x\times 4\pi}[/tex]

Where, [tex]\Delta p[/tex] = change in momentum

[tex]\Delta x[/tex] = change in position

Put the value into the formula

[tex]\Delta p=\dfrac{6.6\times10^{-34}}{4\pi\times10^{-10}}[/tex]

[tex]\Delta p=5.3\times10^{-23}[/tex]

We need to calculate the kinetic energy for an electron

[tex]K.E=\dfrac{p^2}{2m}[/tex]

Where, P = momentum

m = mass of electron

Put the value into the formula

[tex]K.E=\dfrac{(5.3\times10^{-23})^2}{2\times9.1\times10^{-31}}[/tex]

[tex]K.E=1.54\times10^{-15}\ J[/tex]

Hence, The kinetic energy of an electron is [tex]1.54\times10^{-15}\ J[/tex]

Answer:

0.28 J

Explanation:

Since the air-hockey puck was initially at rest

KE₀ = initial kinetic energy of the air-hockey puck = 0 J

KE = final kinetic energy of the air-hockey puck

m = mass of air-hockey puck 0.5 kg

F = net force = 0.4 N

d = distance moved = 0.7 m

Using work-change in kinetic energy

F d = (KE - KE₀)

(0.4) (0.7) = KE - 0

KE = 0.28 J

Answer:

Height of tree = 78.35 meters.

Explanation:

We have

          1 meter = 3.28 feet

That is

          [tex]1 ft = \frac{1}{3.28}=0.3048m[/tex]

Here height of tree = 257 ft

Height of tree = 257 x 0.3048 = 78.35 m

Height of tree = 78.35 meters.

Answer:

Final temperature = 52.44 °C

Explanation:

We have equation for thermal expansion

        ΔL = LαΔT

We have change in length = Circumference of 2.35 cm radius - Circumference of 2.34 cm radius = 2π x 2.35 - 2π x 2.34 = 0.062 cm

Length of eyeglass frame = 2π x 2.34 = 14.70 cm

Coefficient of linear expansion, α = 1.30 x 10⁻⁴ °C⁻¹

Substituting

        0.062 = 14.70 x 1.30 x 10⁻⁴ x ΔT    

         ΔT = 32.44°C

         Final temperature = 32.44 + 20 = 52.44  °C

To fit lenses of 2.35 cm radius into eyeglass frames with lens holes of 2.34 cm radius at room temperature, the frames made of an epoxy plastic should be heated to about 52°C. This fact is obtained using the physics concept of thermal expansion.

The question relates to the concept of thermal expansion typically studied in physics. The change in radius due to thermal expansion in a one-dimensional system like the eyeglass frames can be given by the formula Δr = αr(ΔT), where Δr is the change in radius, α is the coefficient of expansion, r is the initial radius, and ΔT is the change in temperature. Upon heating, the frames will expand and their lens holes will become larger. Here, we are trying to determine the temperature needed to increase the hole radius from 2.34 cm to 2.35 cm. Using the above formula:

0.01 cm = 1.30 × 10−4°C−1 * 2.34 cm * ΔT

Solving for ΔT (the change in temperature), we get ΔT = about 32°C. Thus, the frames need to be heated to about 32°C above room temperature, i.e., 20°C + 32°C = 52°C.

https://brainly.com/question/30242448

#SPJ11

Answer:

[tex]f = +42.9 cm[/tex]

[tex]P =+2.33Dioptre[/tex]

Explanation:

As we know that Far sighted person has near point shifted to 60 cm distance

so he is able to see the object 60 cm

and the person want to see the objects at distance 25 cm

so here the image distance from lens is 60 cm and the object distance from lens is 25 cm

now from lens formula we have

[tex]\frac{1}{d_i} + \frac{1}{d_0} = \frac{1}{f}[/tex]

[tex]-\frac{1}{60} + \frac{1}{25} = \frac{1}{f}[/tex]

[tex]f = +42.9 cm[/tex]

Now we know that power of lens is given as

[tex]P = \frac{1}{f}[/tex]

[tex]P = \frac{1}{0.429} = +2.33Dioptre[/tex]

Answer:

The electric field between the plates is 120 V/m.

(c) is correct option.

Explanation:

Given that,

Potential difference = 12 volt

Distance = 10 cm = 0.1 m

We need to calculate the electric field between the plates

Using formula of electric field

[tex]E = \dfrac{V}{d}[/tex]

Where, V = potential difference

d = distance between the plates

Put the formula

[tex]E =\dfrac{12}{0.1}[/tex]

[tex]E=120\ V/m[/tex]

Hence, The electric field between the plates is 120 V/m.

Answer:

[tex]F = (8.35 \times 10^{-16})\hat i - (12.12 \times 10^{-16})\hat j +(1.35 \times 10^{-16})\hat k[/tex]

Explanation:

When a charge is moving in constant magnetic field and electric field both then the net force on moving charge is vector sum of force due to magnetic field and electric field both

so first the force on the moving charge due to electric field is given by

[tex]\vec F_e = q\vec E[/tex]

[tex]\vec F_e = (1.6 \times 10^{-19})(3.3 \hat i - 4.5 \hat j) \times 10^3[/tex]

[tex]\vec F_e = (5.28 \times 10^{-16}) \hat i - (7.2 \times 10^{-16}) \hat j[/tex]

Now force on moving charge due to magnetic field is given as

[tex]\vec F_b = q(\vec v \times \vec B)[/tex]

[tex]\vec F_b = (1.6 \times 10^{-19})((6.6 \hat i+2.8 \hat j−4.8 \hat k) \times 10^3 \times (0.64 \hat i + 0.40 \hat j) )[/tex]

[tex]\vec F_b = (4.22 \times 10^{-16})\hat k - (2.87 \times 10^{-16})\hat k - (4.92 \times 10^{-16})\hat j + (3.07 \times 10^{-16}) \hat i[/tex]

[tex]\vec F_b = (3.07\times 10^{-16})\hat i - (4.92 \times 10^{-16})\hat j + (1.35 \times 10^{-16})\hat k[/tex]

Now net force due to both

[tex]F = F_e + F_b[/tex]

[tex]F = (8.35 \times 10^{-16})\hat i - (12.12 \times 10^{-16})\hat j +(1.35 \times 10^{-16})\hat k[/tex]

An electric and magnetic field exerts force on a proton moving with velocity in that field. The total force can be calculated from the Lorentz Force equation, which requires knowledge of the charge of the proton, its velocity, and the electric and magnetic fields it is experiencing.

In Physics, the total force acting on a charged particle moving through an electric field E and a magnetic field B is given by the Lorentz Force equation: F = q(E + v × B), where q is the charge of the particle, and v is its velocity.

By given that the proton's charge is q = 1.6×10^-19 C and proton's velocity v = (6.6i+2.8j-4.8k)x10^3 m/s, electric field E = (3.3i-4.5j)x10^3 V/m, and magnetic field B = (0.64i+0.40j)T, we can plug these values into the equation.

To find the cross product of v and B, we use the determinant of a 3x3 matrix. The value for the F vector can be calculated as follows: F = q [E + v × B] and the cross product 'v × B' is calculated as the determinant of a 3x3 matrix. This yields force values that are expected to be in i, j, and k components. These calculations need to be done carefully to ensure accuracy, but are straightforward with the use of any standard physics formula sheet.

https://brainly.com/question/15552911

#SPJ3

Explanation:

It is given that,

Length of solenoid, l = 28 cm = 0.28 m

Area of cross section, A = 0.475 cm² = 4.75 × 10⁻⁵ m²

Current, I = 85 A

(a) The inductance of the solenoid is given by :

[tex]L=\dfrac{\mu_oN^2A}{l}[/tex]

[tex]L=\dfrac{4\pi\times 10^{-7}\times (645)^2\times 4.75\times 10^{-5}}{0.28}[/tex]

L = 0.0000886 H

[tex]L=8.86\times 10^{-5}\ H[/tex]

(b) Energy contained in the coil's magnetic field is given by :

[tex]U=\dfrac{1}{2}LI^2[/tex]

[tex]U=\dfrac{1}{2}\times 8.86\times 10^{-5}\ H\times (85\ A)^2[/tex]

U = 0.3200675 Joules

or

U = 0.321 Joules

Hence, this is the required solution.

Answer:

Option D is the correct answer.

Explanation:

Young's modulus is the ratio of tensile stress and tensile strain.

Bulk modulus is the ratio of pressure and volume strain.

Rigidity modulus is the ratio of shear stress and shear strain.

Here we are asked about relationship between elastic shear stress and shear strain. We have rigidity modulus is the ratio of shear stress and shear strain.

Option D is the correct answer.

The relationship between elastic shear stress and shear strain is characterized by the modulus of rigidity or shear modulus, which is a key property in understanding a material's deformation under shear forces.

The relationship between elastic shear stress and shear strain is represented by the modulus of rigidity, also known as the shear modulus. This modulus is a type of elastic modulus specific to shear stress and is the proportionality constant that relates shear stress to shear strain within the linear elastic region of a material's response to stress, as described by Hooke's Law.

There are different types of elastic modulus for different types of stress and strain; for tensile stress, the modulus is known as Young's modulus, for bulk stress, it is the bulk modulus, and for shear stress - which is the focus of this question - it is the shear or rigidity modulus. The modulus of rigidity is crucial for determining how a material will deform under shear forces and is a fundamental property used in engineering and construction to ensure materials behave as expected under load.

Answer: 2561.7 pounds

Explanation:

If we assume the total weight of an airplane (in pounds units) as a linear function of the amount of fuel in its tank (in gallons) and we make a Weight vs amount of fuel graph, which resulting slope is 5.7, we can use the slope equation of the line:

[tex]m=\frac{Y-Y_{1}}{X-X_{1}}[/tex]  (1)

Where:

[tex]m=5.7[/tex] is the slope of the line

[tex]Y_{1}=2390.7pounds[/tex] is the airplane weight with  51 gallons of fuel in its tank (assuming we chose the Y axis for the airplane weight in the graph)

[tex]X_{1}=51gallons[/tex] is the fuel in airplane's tank for a total weigth of 2390.7 pounds (assuming we chose the X axis for the a,ount of fuel in the tank in the graph)

This means we already have one point of the graph, which coordinate is:

[tex](X_{1},Y_{1})=(51,2390.7)[/tex]

Rewritting (1):

[tex]Y=m(X-X_{1})+Y_{1}[/tex]  (2)

As Y is a function of X:

[tex]Y=f_{(X)}=m(X-X_{1})+Y_{1}[/tex]  (3)

Substituting the known values:

[tex]f_{(X)}=5.7(X-51)+2390.7[/tex]  (4)

[tex]f_{(X)}=5.7X-290.7+2390.7[/tex]  (5)

[tex]f_{(X)}=5.7X+2100[/tex]  (6)

Now, evaluating this function when X=81 (talking about the 81 gallons of fuel in the tank):

[tex]f_{(81)}=5.7(81)+2100[/tex]  (7)

[tex]f_{(81)}=2561.7[/tex]  (8)   This means the weight of the plane when it has 81 gallons of fuel in its tank is 2561.7 pounds.

Final answer:

To find the weight of the airplane with 81 gallons of fuel, calculate the additional fuel weight (30 gallons
* 5.7 pounds/gallon = 171 pounds) and add it to the initial weight (2390.7 pounds + 171 pounds = 2561.7 pounds).

Explanation:

The question asks to calculate the weight of an airplane with a different amount of fuel in its tank, given the weight with a specific amount and the slope of weight increase per gallon of fuel added. To find the new weight, we first calculate the weight increase due to the additional fuel, then add this increase to the original weight of the airplane.

Initial weight with 51 gallons: 2390.7 pounds
Fuel increase: 81 gallons - 51 gallons = 30 gallons
Slope (rate of weight increase): 5.7 pounds per gallon
Additional weight from extra fuel: 30 gallons
* 5.7 pounds/gallon = 171 pounds
New weight with 81 gallons: 2390.7 pounds + 171 pounds = 2561.7 pounds

Answer:

a) [tex]4.1\times 10^{6} \frac{m}{s}[/tex]

b) [tex]9.2\times 10^{-8} s[/tex]

c) [tex]5.6\times 10^{-14} J[/tex]

d) 175000 volts

Explanation:

a)

[tex]q[/tex]  = magnitude of charge on the alpha particle = 2 x 1.6 x 10⁻¹⁹ C = 3.2 x 10⁻¹⁹ C

[tex]m[/tex]  = mass of alpha particle = 4 x 1.67 x 10⁻²⁷ kg = 6.68 x 10⁻²⁷ kg

[tex]r[/tex]  = radius of circular path = 5.99 cm = 0.0599 m

[tex]B[/tex]  = magnitude of magnetic field = 1.43 T

[tex]v[/tex] = speed of the particle

Radius of circular path is given as

[tex]r = \frac{mv}{qB}[/tex]

[tex]0.0599 = \frac{(6.68\times 10^{-27})v}{(3.2\times 10^{-19})(1.43)}[/tex]

[tex]v = 4.1\times 10^{6} \frac{m}{s}[/tex]

b)

Time period is given as

[tex]T = \frac{2\pi m}{qB}[/tex]

[tex]T = \frac{2(3.14)(6.68\times 10^{-27})}{(3.2\times 10^{-19})(1.43)}[/tex]

[tex]T = 9.2\times 10^{-8} s[/tex]

c)

Kinetic energy is given as

[tex]K = (0.5)mv^{2}[/tex]

[tex]K = (0.5)(6.68\times 10^{-27})(4.1\times 10^{6})^{2}[/tex]

[tex]K = 5.6\times 10^{-14} J[/tex]

d)

ΔV = potential difference

Using conservation of energy

q ΔV = K

(3.2 x 10⁻¹⁹) ΔV = 5.6 x 10⁻¹⁴

ΔV = 175000 volts

Answer:

[tex]KE_f = 372 J[/tex]

Explanation:

The forces on the box while it is sliding down are

1). Component of the weight along the inclined plane

2). Friction force opposite to the motion of the box

3). Applied force on the box

now we know that component of the weight along the inclined plane is given as

[tex]F_g = mgsin\theta[/tex]

[tex]F_g = (20.0)(9.8)sin30 = 98 N[/tex]

Now we know that other component of the weight of object is counterbalanced by the normal force due to inclined plane

[tex]F_n = mgcos\theta[/tex]

[tex]F_n = (20.0)(9.8)cos30 = 170 N[/tex]

now the kinetic friction force on the box is given as

[tex]F_k = \mu F_n[/tex]

[tex]F_k = 0.100(170) = 17 N[/tex]

now the Net force on the box which is sliding down is given as

[tex]F_{net} = F_g - F_k - F_{applied}[/tex]

[tex]F_{net} = 98 - 17 - 50 = 31 N[/tex]

now the work done by net force = change in kinetic energy of the box

[tex]F.d = KE_f - KE_i[/tex]

[tex]31(12) = KE_f - 0[/tex]

[tex]KE_f = 372 J[/tex]

Final answer:

The increase in the kinetic energy of the box is calculated by finding the net work done on the box as it slides down the incline, which is found to be 373.2 J. The closest answer from the options provided is 372 J.

Explanation:

We need to calculate the increase in the kinetic energy of the box as it slides down the incline. First, let's determine the forces acting on the box:

Gravitational force component along the incline: Fg = m*g*sin(θ) = 20.0 kg * 9.81 m/s2 * sin(30°) = 98.1 N

Kinetic friction force: [tex]F_{k}[/tex] = μk * N = μk * m*g*cos(θ) = 0.100 * 20.0 kg * 9.81 m/s2 * cos(30°) = 17.0 N

Applied force up the incline: Fa = 50.0 N

Next, calculate the net force on the box:

Fnet = Fg - [tex]F_{k}[/tex] - Fa = 98.1 N - 17.0 N - 50.0 N = 31.1 N

Now, calculate the work done by the net force, which equals the increase in kinetic energy:

Work = Fnet * d = 31.1 N * 12.0 m = 373.2 J

The closest answer to this calculated value is 372 J.

Answer:

a) Weight of the rock out of the water = 16.37 N

b) Buoyancy force = 4.61 N

c) Mass of the water displaced = 0.47 kg

d) Weight of rock under water = 11.76 N

Explanation:

a) Mass of the rock out of the water = Volume x Density

   Volume = 470 cm³

   Density = 3.55 g/cm³

   Mass = 470 x 3.55 = 1668.5 g = 1.6685 kg

   Weight of the rock out of the water = 1.6685 x 9.81 = 16.37 N

b) Buoyancy force = Volume x Density of liquid x Acceleration due to gravity.

   Volume = 470 cm³

   Density of liquid = 1 g/cm³

   [tex]\texttt{Buoyancy force}= \frac{470\times 1\times 9.81}{1000} = 4.61 N[/tex]

c) Mass of the water displaced = Volume of body x Density of liquid

   Mass of the water displaced = 470 x 1 = 470 g = 0.47 kg

d) Weight of rock under water = Weight of the rock out of the water - Buoyancy force

   Weight of rock under water = 16.37 - 4.61  =11.76 N

Answer:

T = 2.5 lb

N= -0.33 lb

Explanation:

given

r = 9 in

[tex]\dot{r} =-3.6 in/s and\ \ddot{r} = 0[/tex]

[tex]\dot{\theta} = 6.3\ rad/s and\ \ddot{\theta} = 2.1\ rad/s^2[/tex]

[tex]-T = m a_r = m(\ddot{r} -r{\dot{\theta}^2)[/tex]

[tex]N= m a_{\theta} = m(r\ddot{\theta}+2\dot{r}\dot{\theta}})[/tex]

[tex]T= mr{\dot{\theta}^2 = \frac{3}{386.4}(9)(6)^2 =2.5lb[/tex]

[tex]N= m(r\ddot{\theta}+2\dot{r}\dot{\theta}})=\frac{3}{386.4}[9(-2)+2(-2)(6)]=-0.326 lb[/tex]

Answer:

Greatest amount of time to warm up: Aluminum

Then steel,

then copper

Explanation:

The higher the heat capacity, the longer it takes to warm the metal up.

Final answer:

To determine which metal heats up the fastest, you must consider their specific heat capacities. Copper, with the lowest specific heat capacity of 390 J/(kg°C), will heat up the fastest, followed by steel (450 J/(kg°C)) and aluminum (910 J/(kg°C)).

Explanation:

The concept of specific heat capacity is critical in understanding the rate at which different materials will heat up or cool down. Specific heat capacity, denoted by Cmetal, refers to the amount of heat needed to raise the temperature of one kilogram of a substance by one degree Celsius.

The metals in question are steel at 450 J/(kg°C), aluminum at 910 J/(kg°C) and copper at 390 J/(kg°C). The lower the specific heat capacity, the faster a material will reach a higher temperature when exposed to a constant heat source. Hence, according to their specific heat capacities, the metals rank in the following order in terms of heating up quickly: copper (390 J/(kg°C)), steel (450 J/(kg°C)), and aluminum (910 J/(kg°C)). This is because copper has the lowest specific heat capacity and therefore will require less energy to increase in temperature compared to steel and aluminum.

Answer:

Part a)

A = 66.2 m

Part b)

Angle = 38.35 degree

Explanation:

Part a)

Length of the vector is the magnitude of the vector

here we know that

[tex]A_x = 52.0 m[/tex]

[tex]A_y = 41.0 m[/tex]

now we have

[tex]A = \sqrt{A_x^2 + A_y^2}[/tex]

[tex]A = \sqrt{52^2 + 41^2}[/tex]

[tex]A = 66.2 m[/tex]

Part b)

Angle made by the vector is given as

[tex]tan\theta = \frac{A_y}{A_x}[/tex]

[tex]tan\theta = \frac{41}{52}[/tex]

[tex]\theta = 38.25 degree[/tex]

Answer:

(i) false

(ii) true

(iii) true

(iv) false

Explanation:

(i) The ratio of Cp and Cv is not constant for all the gases. It is because the value of cp and Cv is different for monoatomic, diatomic and polyatomic gases.

So, this is false.

(ii) For monoatomic gas

Cp = 5R/2, Cv = 3R/2

So, thier ratio

Cp / Cv = 5 / 3 = 1.67

This statement is true.

(iii) for diatomic gases

Cp = 7R/2, Cv = 5R/2

Cp / Cv = 7 / 5 = 1.4

This statement is true.

(iv) It is false.

Answer:

Common trade name of polytetrafluoroethylene is Teflon

Many uses are there some of them are given in explanation.

Explanation:

Common trade name of polytetrafluoroethylene is Teflon.

Main uses of polytetrafluoroethylene:

1) To coat non stick pans

2) Used as ski bindings

3)  Used as fabric protector to repel stains on formal school-wear

4) Used to make to make a waterproof, breathable fabric in outdoor apparel.

Answer:

The initial temperature of the gas was of T1= 112ºC .

Explanation:

T1= ?

T2= 35 ºC = 308.15 K

V1= 0.225 L

V2= 0.18 L

T2* V1 / V2 = T1

T1= 385.18 K = 112ºC

Answer:

Driving speed of the car = 10 m/s

Explanation:

The car hits the water a distance of 15 meters from the base of the cliff.

Horizontal displacement = 11 m

A robot car drives off a cliff that is 11 meters above the water below.

Vertical displacement = 11 m

We have

     s = ut + 0.5 at²

     11 = 0 x t + 0.5 x 9.81 x t²

      t = 1.50 s

So the car moves 15 meters in 1.50 seconds.

     Velocity

             [tex]v=\frac{15}{1.5}=10m/s[/tex]

Driving speed of the car = 10 m/s

Final answer:

The angular momentum of a particle about the origin is given by the cross product of its position vector and linear momentum. In this case, the position vector of the particle is (6.00 î + 5.70 t ĵ) and the mass of the particle is 1.70 kg. To find the angular momentum, calculate the linear momentum and take the cross product with the position vector.

Explanation:

The angular momentum of a particle about the origin is given by the cross product of its position vector and linear momentum. In this case, the position vector of the particle is represented by r = (6.00 î + 5.70 t ĵ) and the mass of the particle is 1.70 kg. To find the angular momentum, we need to calculate the linear momentum first.

The linear momentum of a particle is given by the product of its mass and velocity. The velocity vector is given by the derivative of the position vector with respect to time, which in this case is v = (0 î + 5.70 ĵ) m/s. Substituting the values, we can find the linear momentum, which is p = (1.70 kg)(0 î + 5.70 ĵ) m/s.

To find the angular momentum, we take the cross product of the position vector and linear momentum:

ŕ × p = (6.00 î + 5.70 t ĵ) × (1.70 kg)(0 î + 5.70 ĵ) m/s = (0 î + 34.65 î t + 9.69 ĵ) kg·m²/s

Therefore, the angular momentum of the particle about the origin as a function of time is (0 î + 34.65 î t + 9.69 ĵ) kg·m²/s.

The angular momentum of the particle about the origin as a function of time is L(t) = 58.14 t k kg·m²/s. This result was obtained by calculating the cross product of the position and linear momentum vectors.

To determine the angular momentum of a particle about the origin as a function of time, we start by using the given position vector r(t) = (6.00 î + 5.70t ĵ) in meters.

The linear momentum p of the particle is given by p = m v, where m is the mass and v is the velocity. Since mass m = 1.70 kg, we first need the velocity. The velocity v(t) is the derivative of the position vector:

v(t) = d(r(t))/dt = 0 î + 5.70 ĵ = 5.70 ĵ m/s

Now, the linear momentum p(t) is:

p(t) = m v(t) = 1.70 kg * 5.70 ĵ m/s = 9.69 ĵ kg·m/s

The angular momentum L about the origin is given by L = r × p. Performing the cross product calculation:

r = 6.00 î + 5.70t ĵ

p = 9.69 ĵ

r × p = (6.00 î + 5.70t ĵ) × (9.69 ĵ)

Calculating the cross product, we get:

Thus, the angular momentum as a function of time is:

L(t) = 58.14 t k kg·m²/s