what mass of carbon dioxide gas occupies a volume of 81.3 L at 204kPa and a temperature of 95 degrees celcius

c) are often metals

liquids are fairly good thermal conductors while gases and things like wood and plastic foam are poor conductors of heat.

Thermal conductors have high thermal conductivity and are usually metals because they have free electrons that are efficient at transferring heat. Latent heat is not a direct measure of thermal conductivity. Thus, it can be stated that thermal conductors have high conductivity (option A).

Thermal conductors are materials that have a high ability to transfer heat through them. Among the multiple-choice options provided, the correct answers that accurately define thermal conductors are:

A. have high conductivity - Thermal conductors have high thermal conductivity, meaning they can efficiently transfer heat.

C. are often metals - Most metals, such as copper and aluminum, are good examples of thermal conductors due to the presence of free electrons which facilitate the transfer of heat.

In the context of the options provided related to latent heat, the most appropriate option is A (have high conductivity) which is a characteristic of a thermal conductor. Latent heat primarily concerns the heat absorbed or released during phase changes, not thermal conductivity.

When we speak about materials' thermal properties, we often refer to conductors and insulators. Good electrical conductors, which are typically metals, are also known to be good heat conductors due to the free movement of electrons that transport thermal energy.

Final answer:

The pH of Sprite with a [H+] concentration of .000045 M is approximately 4.35, which is calculated using the formula pH = -log([H+]).

Explanation:

To calculate the pH of Sprite, which has a hydrogen ion concentration [H+] = .000045 M, we use the formula pH = -log([H+]). By inserting the given concentration into this formula, we find that pH = -log(.000045). Using a calculator to perform this logarithm results in a pH of approximately 4.35.

This calculation demonstrates the acidic nature of Sprite, as a pH lower than 7 indicates an acidic solution. The understanding of pH is crucial in chemistry to determine the acidity or basicity of a solution.

Answer:

They break down the plants and animals they eat.

Explanation:

Consumers are the organisms which feed on plants and animals for obtaining energy. The carbon which is present in plant body in the form of glucose which is made in the process of photosynthesis. When these plants are eaten by consumers, the carbon which present in plants are transferred into the animal's body. This carbon is removed from the body of consumer in the process of cellular respiration and again goes to the atmosphere.

Answer and Explanation:

Let's just make it easy and have both parents be heterozygous. This means that they each have 1 dominant allele (R) and 1 recessive allele (r). Make a Punnett Square (see attachment).

The possible outcomes are RR (one of it), Rr (two of it), and rr (one of it). That means that phenotypically, 3 of the offspring will be round and 1 will be wrinkled.

Answer:

Rr,    RR,    rr

Explanation:

The neutron is most equal to a proton  in mass.

The mass of a neutron is 1.67492749804 × 10−27 kg, while the mass of a proton is 1.67262189832 × 10−27 kg. This means that the neutron is only about 0.1% heavier than the proton.

Electrons are much lighter than neutrons and protons, with a mass of 9.1093837015 × 10−31 kg. This means that the neutron is about 1,836 times heavier than the electron.

Atoms and molecules vary widely in mass, so it is impossible to say definitively which one is most equal to a neutron in mass. However, a typical atom, such as carbon, is about 12 times heavier than a neutron, while a typical molecule, such as water, is about 18 times heavier than a neutron.

To know more about neutron

https://brainly.com/question/28992636

#SPJ12

Answer:

The Oxygen Atom

Explanation:

The oxygen atom in a water molecule has the greatest electronegativity. Therefore, the correct option is option C.

The tendency of an atom of a particular chemical element could attract shared electrons while forming a chemical bond is represented by the symbol. The electronegativity of an atom is determined both by its atomic number as well as the distance between its valence electrons and the charged nucleus.

The higher the related electronegativity, the more electrons an atom or substituent group attracts. Electronegativity is a simple approach to quantify bond energy as well as the sign and degree of a bond's molecular polarity, that describes a bond all along continuum between covalent through ionic bonding. The oxygen atom in a water molecule has the greatest electronegativity.

Therefore, the correct option is option C.

To learn more about electronegativity, here:

https://brainly.com/question/1163776

#SPJ6

Answer:

The wind energy and solar energy have their own benefits when producing electricity but one of their major drawbacks is that both these energy form depends on the environmental conditions and cannot be stored.

On the other hand, in hydroelectric pumped storage, water is stored in the form of gravitational potential energy. If not enough water is there to produce electricity, then this stored water can be run over turbines to produce electricity. Hence, this is one benefit of hydroelectric pumped storage over wind and solar energy.

Answer:

These pumps allow the energy to be saved for future use, whenever the load increases.

Explanation:

Pumped-storage hydropower (PSH) is a type of hydroelectric energy storage. It is a configuration of two water reservoirs at different elevations that can generate power (discharge) as water moves down through a turbine; this draws power as it pumps water (recharge) to the upper reservoir.

PSH capabilities can be characterized as open-loop—where there is an ongoing hydrologic connection to a natural body of water—or closed-loop, where the reservoirs are not connected to an outside body of water.

Answer:a weak acid and a weak base

Explanation:

Answer: 0.4 moles

Explanation:

Given that:

Amount of moles of HCI = Z (let unknown value be Z)

Volume of HCl = 500.0 mL

Convert 500.0 mL to liters

If 1000ml = 1L

500.0 mL = (500.0 mL/1000mL) = 0.5L

Molarity of HCl solution = 0.200M

Recall that molarity of a solution is obtained by dividing the amount of moles by volume in liters

i.e Molarity = Amount in moles/volume

0.200M = Z x 0.5L

Z = 0.200M / 0.5L

Z = 0.4 moles

Thus, 0.4 moles of HCl is needed to make the solution

Answer:

4050 mL

Explanation:

Given data:

Mass of glucose = 150.1 g

Molarity of solution = 0.205 M

Volume of solution = ?

Solution:

Molarity  = number of moles of solute / L of solution.

Now we will calculate the moles of sugar first.

Number of moles = mass/ molar mass

Number of moles = 150.1 g/ 180.156 g/mol

Number of moles = 0.83 mol

Now we will determine the volume:

Molarity  = number of moles of solute / L of solution.

0.205 M = 0.83 mol / L of solution.

L of solution = 0.83 mol / 0.205 M

L of solution = 4.05 L

L to mL conversion:

4.05 L × 1000 mL / 1 L = 4050 mL

Answer:

stars and lightning are both made of plasma.

Lightning and stars both consist of plasma, the 'fourth state of matter' that includes a significant number of electrically charged particles. Stars are essentially balls of glowing plasma, while lightning is a rapid discharge of energy that forms plasma.

Lightning and stars both have something important in common - they are made of plasma. Plasma is often referred to as the 'fourth state of matter,' distinct from solid, liquid, or gas. It is an ionized gas, which means it contains a significant number of electrically charged particles—positive ions and negative electrons.

Stars, including our sun, are essentially massive balls of glowing plasma. On the other hand, lightning is a dramatic natural phenomenon generated when electrical charges separate within a cloud and cause a rapid discharge of energy, also forming plasma. This results in a bright flash of light and an accompanying shock wave that we hear as thunder. Thus, the primary similarity between lightning and stars is their plasma composition.

https://brainly.com/question/31510915

#SPJ11

After 90 days, two half-lives of a substance with a 45-day half-life will have passed, resulting in one-fourth or 25% of the original amount remaining.

If a substance has a half-life of 45 days, after 90 days, there would have been two half-lives that passed. During each half-life, half of the remaining substance decays. So after the first 45 days, you would be left with one-half of the initial amount, and after another 45 days (which totals 90 days), you would be left with half of that amount. This means after 90 days, one-fourth of the original substance would be left.

To calculate this, you can use the equation for exponential decay:

Final amount = Initial amount × [tex]1/2^{number of half lives}[/tex]

In this case, the number of half-lives is 90 days divided by the half-life of the substance, which is 45 days:

Number of half-lives = 90 days / 45 days per half-life = 2 half-lives

Therefore, the remaining amount of the substance would be:

Final amount = Initial amount ×(1/2)² = Initial amount ×1/4

This results in the correct answer that after 90 days, you'd have 25% or one-fourth of the original amount of the substance remaining.

Final answer:

Given her prolonged and unprotected exposure to UV light from the sun and tanning beds, it is very likely that Mary will develop some form of skin cancer. Sunburns and the use of tanning beds significantly increase the risk of skin cancer by damaging the DNA in skin cells and causing abnormal cell growth.

Explanation:

The story of Mary's repeated and unprotected exposure to the sun and her use of tanning beds highlights a significant health concern. Given the information, it is very likely that Mary will end up with some form of skin cancer. Ultraviolet (UV) light from the sun and tanning beds can damage the DNA in skin cells, leading to abnormal cell growth and potentially cancerous tumors. Skin cancer is classified into various types, including melanoma, basal cell carcinoma, and squamous cell carcinoma, with varying degrees of severity and treatment modalities. Mary's small sores on her arms and shoulders could be early signs of skin cancer, emphasizing the importance of protective measures against UV radiation, such as wearing sunscreen with a high SPF, wearing protective clothing, and avoiding excessive sun exposure and the use of tanning beds.

Options like HIV/AIDS, bacterial infection, and Parkinson's disease are unrelated to the described behavior and symptoms. Skin cancer is directly linked to the conditions described in Mary's case, making it the most likely outcome of her prolonged and unprotected exposure to UV radiation.

Answer:

C6H12O6

Explanation:

This means that there are 6 carbon atoms, 12 hydrogen atoms and 6 oxygen atoms

Answer:

C6H12O6

Explanation:

Glucose is a aldohexose. It is a simple sugar with six carbon atoms. It is a monosaccharide. Molecular formula of glucose is C6 H12 O6.

Answer:

The answer is C.  It causes the collision of alpha particles.

Explanation:

Nuclear fusion is a process that produces heavier elements by combining lighter elements.

Nuclear fusion is a process in which two or more atomic nuclei come together to form a single, more massive nucleus, releasing a large amount of energy in the process. The answer to the question is It produces heavier elements. During nuclear fusion, lighter elements combine to form heavier elements. This process is responsible for the energy emitted by the sun and other stars. It does not create abundant radioactive material as nuclear fusion reactions do not produce long-lived radioactive waste like nuclear fission reactions. It does not cause the collision of alpha particles, as alpha particles are involved in nuclear decay processes. It also does not transform energy into mass, as mass is directly involved in nuclear reactions.

Hence the answer is Option A.

https://brainly.com/question/14019172

#SPJ6

Answer:

8M IM NOT SURE SO. IF YOU CAN GET A CLEARED PICTURE OF IT WOULD REALLY HELP

The sweetest tea would be the one that contains the highest amount of sugar. The sweetness of a drink is determined by sugar content. Hence, a sweet tea with larger sugar amount will taste sweeter.

The sweetness of tea is determined by the amount of sugar that it contains. So among different sweet teas, the one with the highest amount of sugar will taste the sweetest. For instance, if Tea A contains 20grams of sugar per serving and Tea B contains 30grams of sugar per serving, then Tea B would taste sweeter than Tea A, because it contains more sugar.

https://brainly.com/question/17067135

#SPJ3

Answer:

1.8 × 10⁻¹⁶ mol  

Explanation:

(a) Calculate the solubility of the Sr₃(PO₄)₂

Let s = the solubility of Sr₃(PO₄)₂.

The equation for the equilibrium is

Sr₃(PO₄)₂(s) ⇌ 3Sr²⁺(aq) + 2PO₄³⁻(aq); Ksp = 1.0 × 10⁻³¹

                         1.2 + 3s          2s

[tex]K_{sp} =\text{[Sr$^{2+}$]$^{3}$[PO$_{4}^{3-}$]$^{2}$} = (1.2 + 3s)^{3}\times (2s)^{2} = 1.0 \times 10^{-31}\\\text{Assume } 3s \ll 1.2\\1.2^{3} \times 4s^{2} = 1.0 \times 10^{-31}\\6.91s^{2} = 1.0 \times 10^{-31}\\s^{2} = \dfrac{1.0 \times 10^{-31}}{6.91} = 1.45 \times 10^{-32}\\\\s = \sqrt{ 1.45 \times 10^{-32}} = 1.20 \times 10^{-16} \text{ mol/L}\\[/tex]

(b) Concentration of PO₄³⁻

[PO₄³⁻] = 2s = 2 × 1.20× 10⁻¹⁶ mol·L⁻¹ = 2.41× 10⁻¹⁶ mol·L⁻¹

(c) Moles of PO₄³⁻

Moles = 0.750 L × 2.41 × 10⁻¹⁶ mol·L⁻¹ = 1.8 × 10⁻¹⁶ mol

To calculate the amount of PO4^3- present at equilibrium, we can use the stoichiometry of the reaction and the amount of Sr3(PO4)2 added. Since the reaction has a 1:2 stoichiometry, the amount of PO4^3- is twice the amount of Sr3(PO4)2 added. The amount of Sr3(PO4)2 added can be calculated using the molarity and volume of the Sr(NO3)2 solution.

To calculate the amount of PO43- present at equilibrium, we need to use the concept of solubility product constant (Ksp) and the stoichiometry of the reaction.

First, let's write the balanced equation for the reaction:

Sr3(PO4)2(s) → 3Sr2+(aq) + 2PO43-(aq)

According to the stoichiometry of the reaction, 1 mole of Sr3(PO4)2 produces 2 moles of PO43-. Therefore, if we have excess Sr3(PO4)2, all Sr3(PO4)2 will dissolve and the amount of PO43- at equilibrium is equal to twice the amount of Sr3(PO4)2 added.

Since we have 750 mL of 1.2 M Sr(NO3)2, we can calculate the amount of Sr3(PO4)2 added:

750 mL * 1.2 mol/L = 900 mol Sr2+

Therefore, the amount of PO43- present at equilibrium is 2 * 900 mol = 1800 mol.

https://brainly.com/question/1419865

#SPJ11

Answer:

0.11mole

Explanation:

Let us assume that the condition is at standard temperature and pressure(STP);

 Given parameters:

        Volume of water  = 2.45L

   Unknown:

       Number of moles found in this volume of water  = ?

Solution;

 At STP;

                 Number of moles  = [tex]\frac{volume of gas}{22.4}[/tex]

 Input the parameters and solve;

                  Number of moles of water  = [tex]\frac{2.45}{22.4}[/tex]   = 0.11mole

The number of moles of water found is  0.11mole

Answer:

91.62 C

Explanation:

Q  =  ( m ) ( Csh ) ( T2 - T1 )

T2  = T1  +  ( Q ) / ( m ) ( Csh )

T2  =  98.8 C  +  ( - 7500 J ) / ( 250 g ) ( 4.186 J/g - C )

T2  =  91.6 C

The final temperature of the water is approximately [tex]\(91.624 \, ^\circ \text{C}\).[/tex]

To calculate the final temperature of the water, we'll use the heat transfer equation:

Q = [tex]mc\Delta T[/tex]

Given values:

m = 250g (mass of water)

c = [tex]1 \, \text{cal/g}^\circ \text{C}\)[/tex] specific heat capacity of water)

Q = -1794 cal (negative because heat is lost)

Now, we'll rearrange the formula to solve for [tex]\(\Delta T\)[/tex] :

[tex]\[\Delta T = \frac{Q}{mc}\][/tex]

Substitute the values:

[tex]\[\Delta T = \frac{-1794 \, \text{cal}}{(250 \, \text{g})(1 \, \text{cal/g}^\circ \text{C})}\][/tex]

Now, calculate [tex]\(\Delta T\)[/tex]:

[tex]\[\Delta T \approx -7.176 \, ^\circ \text{C}\][/tex]

The negative sign indicates a decrease in temperature, which makes sense since heat was lost.

Now, find the final temperature [tex](\(T_{\text{final}}\))[/tex] :

[tex]\[T_{\text{final}} = T_{\text{initial}} + \Delta T\][/tex]

[tex]\[T_{\text{final}} = 98.8 \, ^\circ \text{C} - 7.176 \, ^\circ \text{C}\][/tex]

[tex]\[T_{\text{final}} \approx 91.624 \, ^\circ \text{C}\][/tex]

So, the final temperature of the water is approximately [tex]\(91.624 \, ^\circ \text{C}\)[/tex].

Try to know more about temperature :

https://brainly.com/question/32246379

#SPJ3

Answer:

its not 2H+ + 2OH- -> H20

Explanation

answer is A on ed2020

The net ionic equation for the reaction between Ca(OH)2 and H2SO4 is; 2OH^-(aq) + 2H^+(aq) ----->2H2O(l).

The net ionic equations shows the ions that underwent a change in te cause of the reaction. Hence, the net ionic equation would always exclude the spectator ions.

In this case, the net ionic equation is; 2OH^-(aq) + 2H^+(aq) ----->2H2O(l). The calcium and the sulfate ions are spectator ions.

Learn more about net ionic equation: https://brainly.com/question/4822356

Answer:

8.03x10^23 molecules.

Explanation:

A background knowledge of Avogadro's hypothesis shows that 1 mole of any substance contains 6.02x10^23 molecules

From the above hypothesis which is know today as Avogadro's law, 1 mole of H2O also contains 6.02x10^23 molecules.

1 mole of H2O = (2x1) + 16 = 2 + 16 = 18g.

Now, we can find the number of molecules contained in 24g of H2O as follow:

18g of H2O contains 6.02x10^23 molecules.

Therefore, 24g of H2O will contain = (24x6.02x10^23)/18 = 8.03x10^23 molecules.

From the calculations made above,

24g of H2O contains 8.03x10^23 molecules.

7 valence electrons

Explanation:

Answer:

7

Explanation:

because it is in group 17 so you would use the 2nd digit and that would be 7!

Explanation:

The answer is 116 kJ . c - water's specific heat - 4.184 J/g⋅∘C . Then, you must provide enough heat to get all the water from liquid to steam.

Answer:

Q = 1569 j

Explanation:

Given data:

Mass of water = 5.00 g

Initial temperature = 25.0°C

Final temperature = 100°C

Cp = 4.184 j/g.°C

Energy needed = ?

Solution:

Specific heat capacity:

It is the amount of heat required to raise the temperature of one gram of substance by one degree.

Formula:

Q = m.c. ΔT

Q = amount of heat absorbed or released

m = mass of given substance

c = specific heat capacity of substance

ΔT = change in temperature

ΔT =  100°C - 25°C

ΔT =  75°C

Q = 5 g× 4.184 j/g.°C×75°C

Q = 1569 j

Answer:

Neutral

Explanation:

Ionic compounds are electrically neutral because they form ionic bonds between positively and negatively charged atoms.

Answer:

neutral

Explanation:

just built different

Answer:

Periods indicate that a new period at a new principal energy level which is filled with electrons. Groups indicate that the elements share similar properties because their shells are filled with the same number of valence electons.

Explanation:

We see that starting at period 2 Li has a  +1 charge , He has +2 charge, B has +3 charge, C has the potential to have a +4 charge or -4 charge (because it can gain or loose electrons) and N has a -3 charge, etc. Groups however, have similar properties and every element in a 1A - 8A has the same number of valence electrons. All except the noble gases in which He only needs 2 electrons to be in a perfect state. This is its octet as it would be a completely different element if it had more than 2 electrons in its shell. An example of the groups sharing similar properties is if we were to look at group 1A. In group 1A we find H, Na, K, etc. These are all highly unstable elements when alone (not in a compound) and they are very reactive. If you were to put Na for instance in water, it would light up and you'd see a flame sitting on top of the water. A scientist could do that with the rest of the elements in the group and they would see this increasing in reactivity as you go down the periods. Francium isn't visible long enough to be able to see this happen though. It's more of that kind of element that scientists prove that it exists, but not a very common element to get to learn much about.

Final answer:

Periods indicate electron shells, while groups represent elements with similar chemical properties.

Explanation:

The periods in the periodic table, which are the horizontal rows, indicate the energy levels or electron shells of the elements within them. As you move across a period from left to right, the number of protons and electrons in the elements increases by one, leading to periodic changes in properties.

The groups in the periodic table, which are the vertical columns, represent elements with similar chemical properties. Elements within the same group have the same number of electrons in their outermost shell, leading to similar reactivity and chemical behavior.

Answer : The new pressure if the sample placed in a 2.00-L container is, 0.494 atm.

Explanation :

Boyle's Law : It is defined as the pressure of the gas is inversely proportional to the volume of the gas at constant temperature and number of moles.

[tex]P\propto \frac{1}{V}[/tex]

or,

[tex]P_1V_1=P_2V_2[/tex]

where,

[tex]P_1[/tex] = initial pressure = 0.988 atm

[tex]P_2[/tex] = final pressure = ?

[tex]V_1[/tex] = initial volume = 1.00 L

[tex]V_2[/tex] = final volume = 2.00 L

Now put all the given values in the above equation, we get:

[tex]0.988atm\times 1.00L=P_2\times 2.00L[/tex]

[tex]P_2=0.494atm[/tex]

Thus, the new pressure if the sample placed in a 2.00-L container is, 0.494 atm.

The new pressure if the sample is placed in a 2.00-L container is 0.494 atm.

It means the pressure of the gas should be inversely proportional with respect to the volume of the gas at the same temperature also the no of moles.

P1V1 = P2V2

Here

P1 = initial pressure = 0.988 atm

P2 = final pressure = ?

V1 = initial volume = 1.00 L

V2 = final volume = 2.00 L

So,

the new pressure should be

0.988 * 1.00L = P2 * 2.00l

So, P2 is 0.494 atm

Learn more about pressure here: https://brainly.com/question/22406030