Answer: The correct answer is "C. value of the marginal product of labor is equal to the wage."
Explanation:
Assuming that a company operates in a market of perfect competition and that maximizes profits, this company will hire workers to the point where the value of the marginal product of labor is equal to the wage, because it is the point at which the costs of having an additional worker do not exceed the benefits of his incorporation.
A competitive firm maximizes profit by hiring workers until the value of the marginal product of labor equals the wage. The marginal revenue product must match the market wage for profit maximization, which represents the additional revenue from an additional worker.
Explanation:When a competitive firm maximizes profit, it will hire workers up to the point where the value of the marginal product of labor is equal to the wage. This is known as equating the marginal revenue product (MRP) to the market wage. The MRP is the additional revenue the firm earns from hiring one more worker and is calculated by multiplying the marginal product of labor by the price of the firm's output.
For example, if the going market wage is $12, the profit-maximizing firm will continue to hire workers until the MRP, which is the value of the marginal product, is also $12. If hiring an additional worker generates less than $12 in extra revenue, the cost of hiring (wage) exceeds the benefit (revenue), and thus hiring more workers would not maximize profits.
Learn more about Profit Maximization in Competitive Firms here:https://brainly.com/question/25716386
#SPJ6
Crane Fabrication allocates manufacturing overhead to each job using departmental overhead rates. Crane's operations are divided into a metal casting department and a metal finishing department. The casting department uses a departmental overhead rate of $51 per machine hour, while the finishing department uses a departmental overhead rate of $25 per direct labor hour. Job A216 used the following direct labor hours and machine hours in the two departments: Actual results Casting Department Finishing Department Direct labor hours used 8 14 Machine hours used 3 6 The cost for direct labor is $42 per direct labor hour and the cost of the direct materials used by Job A216 is $2,000. What was the total cost of Job A216 if Crane Fabrication used the departmental overhead rates to allocate manufacturing overhead?
The total cost of Job A216 at Crane Fabrication, considering direct labor, direct materials and manufacturing overhead from both the casting and finishing departments, is calculated to be $3,427.
Explanation:To calculate the total cost of Job A216, we need to sum the cost of direct labor, direct materials, and the allocated manufacturing overhead from both departments.
Direct Labor Cost: For the casting department, it was 8 hours, and for the finishing department, it was 14 hours. Given that the cost of direct labor is $42 per hour, the total labor cost would be (8+14)*$42 = $924. Direct Materials Cost: The cost of direct materials for Job A216 is given as $2,000. Manufacturing Overhead Cost: In the casting department, the job used 3 machine hours, and the department's overhead rate is $51 per machine hour, so the allocated overhead from the casting department is 3*$51 = $153. In the finishing department, the job used 14 labor hours, and the department's overhead rate is $25 per labor hour, so the allocated overhead from the finishing department is 14*$25 = $350.
Therefore, the total cost of the job is the sum of these three costs: $924 (Direct Labor Cost) + $2,000 (Direct Materials Cost) + $153 (Casting Department Overhead) + $350 (Finishing Department Overhead) = $3,427.
Learn more about Cost Calculation here:https://brainly.com/question/33521342
#SPJ12
Two young business school graduates, Laverne and Shirley, form a consulting firm. In deciding between the partnership and corporation form of organization, they are especially concerned about personal liability for giving bad advice to their clients; that is, in the event they are sued, they want to prevent plaintiffs from taking their personal assets to satisfy judgments against the firm. Which form of organization would you recommend? Why?
I would recommend forming a corporation to Laverne and Shirley because it offers limited liability and allows for attracting investors and managers.
Explanation:The form of organization that I would recommend to Laverne and Shirley is a corporation.
A corporation provides limited liability, meaning that the personal assets of the owners are protected in the event of a lawsuit or financial loss. If the consulting firm were to give bad advice and be sued, Laverne and Shirley's personal assets would not be at risk to satisfy judgments against the firm.
Moreover, a corporation can attract investors and managers with the skills and resources needed for growth, which can be vital for a consulting firm to expand and succeed.
Learn more about Business Structures here:https://brainly.com/question/38795744
#SPJ3
The demand curve for lawn fertilizer has a _______________ slope because of ________________________. A) negative; the law of supply. B) positive; incentives to earn profit by suppliers. C) negative; the law of demand. D) positive; expectations concerning future prices. E) constant; the impact of changing consumer tastes.
Answer: (C) negative; the law of demand
Explanation: The law of demand states that at a higher price consumers will demand a lower quantity of a good. i.e. The demand is derived from the law of diminishing marginal utility, which states that the marginal utility of a good or service declines as its available supply increases.
Hence the demand curve is downward sloping.
The weighted-average process-costing method calculates the equivalent units by ________.A) considering only the work done during the current period B) the units started during the current period minus the units in ending inventory C) the units started during the current period plus the units in ending inventory D) the equivalent units completed during the current period plus the equivalent units in ending inventory
Answer:
The correct answer is option D) "the equivalent units completed during the current period plus the equivalent units in ending inventory".
Explanation:
The weighted-average process-costing method establishes an average cost per unit using the equivalent units completed during the current period plus the equivalent units in ending inventory. This method is similar to the first-in first-out (FIFO), with the difference that this method keeps the unfinished goods inventory separate to make the calculation.
Under purchasing power parity, the future spot exchange rate is a function of the initial spot rate in equilibrium and a. the inflation differential. b. the forward discount or premium. c. the income differential. d. none of the above
Answer:
The correct answer is a) the inflation differential.
Explanation:
Inflation differential is the difference we can find between two countries in exchange rates. The inflation differential can produce losses for the company if, in the country you want to buy, there is a big difference in your exchange rate, since this raises the prices of the product. As a result, the company has a loss; it can also happen if It is a case of exports.
If the inflation differential is maintained for an extended period, it can cause loss of competitiveness, since the profit margin of the products would be affected.
I hope this information can help you.
Explain the vertical integration options and directions for the following providers: (a) a major academic medical center such as the University of Iowa, (b) a five-person general surgery group, and (c) a manufacturer of durable medical equipment.
Answer:
(a) Backward vertical integration (b) Forward vertical integration (c) Backward vertical integration
Explanation:
(a) An academic medical center is an example of backward vertical integration. The specialist and faculties from the university will provide treatment to the patients. Such medical centers have tertiary service with several intermediaries.
(b) Here, there is no intermediary between patients and general surgery group. The general surgery group treat patients directly. So here there is a forward vertical integration system.
(c) A manufacturer of durable medical equipment will supply to retailers who in turn supply these to hospitals where the patients will receive service from these equipment. So, it is an example of backward vertical integration.
Morgan Company's budgeted income statement reflects the following amounts: Sales Purchases Expenses January $ 112,000 $ 70,000 $ 23,200 February 102,000 58,000 23,400 March 117,000 73,250 26,200 April 122,000 76,500 27,800 Sales are collected 50% in the month of sale, 30% in the month following sale, and 19% in the second month following sale. One percent of sales is uncollectible and expensed at the end of the year. Morgan pays for all purchases in the month following purchase and takes advantage of a 3% discount. The following balances are as of January 1: Cash $ 80,000 Accounts receivable* 50,000 Accounts payable 64,000 *Of this balance, $30,000 will be collected in January and the remaining amount will be collected in February. The monthly expense figures include $4,200 of depreciation. The expenses are paid in the month incurred. Morgan’s budgeted cash receipts in February are:
Answer:
Net cash Receipts in February = $21,500
Explanation:
Closing balance of January
Opening balance + (Sales X 50%) + Accounts Receivable provided - Cash paid for purchases of previous month X 97% - (Expenses - Depreciation)
= $80,000 + $112,000 X 50% + $30,000 - $64,000 X 97% - ($23,200 - $4,200 (Depreciation)) = $80,000 + $56,000 + $30,000 - $62,080 - $19,000
= $84,920
Closing Balance of February
= Opening balance + Sales X 50% + Previous month sale X 30% + December sale X 19% - Payment for purchase in month of January X 97% - (Expenses of the month - Depreciation)
= $84,920 + $102,000 X 50% + $112,000 X 30% + $20,000/20% X 19% - $70,000 X 97% - ($23,400 - $4,200)
= $84,920 + $56,000 + $33,600 + $19,000 - $67,900 - $19,200
=$106,420
Notes
Opening receivables were $50,000 which is 50% of sale of December, i.e. 20% = $20,000 out of which 1% is bad debt and not received.Purchases are paid next month with a discount of 3% i.e. 100- 3 = 97% of the purchase amount. Depreciation is not paid in cash and thus not included in cash payments of expense.Thus Net cash Receipts in February = Closing - Opening = $106,420 - $84,920 = $21,500
Jim is an appliance salesperson. To make a sale, he asserts that a certain model of a Kitchen Helper refrigerator is the “best one ever made.” This is a. fraud if the statement is the truth. b. fraud if Jim believes that this statement is not true. c. fraud if Jim is stating his opinion, not the facts. d. not fraud.
Answer: the correct answer is c. fraud if Jim is stating his opinion, not the facts.
Explanation: There are laws in place to protect you from being misled about the products and or other representation creates a misleading impression in your mind.
Jim is an appliance salesperson. To make a sale, he asserts that a certain model of a Kitchen Helper refrigerator is the “best one ever made.” This is a (C) fraud if Jim is stating his opinion, not the facts.
Fraud typically involves making false statements or misrepresentations to manipulate someone for personal gain. In this case, Jim is asserting that a certain model of a refrigerator is the "best one ever made." If he is stating this as his opinion without any facts to support it, and he isn't sure about it being true, then it could be considered a fraud. If Jim genuinely believes the statement is true then it may not be fraud even if others may disagree with his opinion. However, if he knowingly makes the claim without any reason or evidence, it could be considered fraudulent behavior.
To know more about sales:
https://brainly.com/question/29436143
#SPJ2
Matthew's Fish Fry has a monthly target operating income of $8,300. Variable expenses are 80% of sales and monthly fixed expenses are $800. What is the monthly margin of safety as a percentage of target sales in dollars?
Answer:
Margin of Safety as percent of sales 91.21%
Explanation:
[tex]Sales \: Revenue - Variable \: Cost = Contribution \: Margin[/tex]
If variable = 80% of sales then
sales - 80% sales = .20 sales = Contribution margin ratio
Next will be calcualte the BEP
[tex]\frac{Fixed\:Cost}{Contribution \:Margin \:Ratio} = Break\: Even\: Point_{dollars}[/tex]
800/0.2 = 4,000
Sales to achieve target income of 8,300
[tex]\frac{Fixed\:Cost + taget \: profit}{Contribution \:Margin \:Ratio} = Sales\: to\: Profit{dollars}[/tex]
(800+8,300)/.2 = 45,500
Margin of safety:
[tex]\frac{current \:sales - BEP_{USD}}{current \:sales} \times 100 = margin \: of \: safety[/tex]
[tex]\frac{45,500 - 4,000}{45,500} \times 100 = 91.21%[/tex]
Firm I is convinced that a certain class of technologies holds real economic potential. However, it does not know, for sure, which particular version of this technology is going to dominate the market. There are eight competing versions of this technology currently, but ultimately, only one will dominate the market. Should Firm I invest in all eight of these technologies itself? Should it invest in just one of these technologies? Should it partner with other firms that are investing in these different technologies?
Answer:
Partner with technology investing firms
Explanation:
Disruptive technologies are capable of completely changing the configuration of a market, so that in the face of a perception of technological change, companies must take technological adherence measures, otherwise their own existence may be at risk. Given the uncertainty about which technology will be right, an appropriate strategy would be to partner technology transfer with firms that are investing in these technologies.
The best strategy for Firm I to take is to partner with technology investing firms
What is Partnership?This refers to the coming together of different companies to use their strengths to complement each other and dominate a market.
Hence, we can note that because Firm I is uncertain about the class of technologies that hold real economic potential, it would be wise to partner with technology investing firms and therefore, limit the risk.
Read more about partnership here:
https://brainly.com/question/14034519
Dean has earned $71,750 annually for the past six years working as an architect for WCC Inc. Under WCC's defined benefit plan (which uses a 7-year graded vesting schedule) employees earn a benefit equal to 4.0% of the average of their three highest annual salaries for every full year of service with WCC. Dean has worked for six full years for WCC and his vesting percentage is 80%. What is Dean's vested benefit (or annual retirement benefit he has earned so far)?
Answer:
The Deans vested benefit will be $13,776.
Explanation:
We can take out the Dean's vested benefit or you can say the annual retirement benefit he has earned so far by multiplying the average of three highest annual salaries by benefit percentage and also multiplying that by the vesting percentage of Deans and the number of years for which he has worked under WCC inc .
DEAN VESTED BENEFIT =
Average of 3 annual salaries x benefit % x vested % of dean x number of
years dean has worked
Firstly here we have to take out the average salary of 3 years,
$71,750 x 3 / 3
= $71,750
DEAN VESTED BENEFIT =
$71,750 X 4% X 80% X 6
= $13,776
A manufacturer believes that the cost function
C(x)=5/2x^2+120x+560
approximates the dollar cost of producing x units of a product. The manufacturer believes it cannot make a profit when the marginal cost goes beyond $450. What is the most units the manufacturer can produce and still make a profit? What is the total cost at this level of production?
The manufacturer can make up to________________ units and still make a profit. This leads to a total cost of_________________________ $.
Answer: The manufacturer can make up to 66 units and still make a profit. This leads to a total cost of $19370.
Explanation:
Given :
C(x)= [tex]\frac{5}{2}x^2+120x+560[/tex]
[tex]\because MC = \frac{\delta C(x)}{\delta X}[/tex]
Since the manufacturer believes it cannot make a profit when the marginal cost goes beyond $450.
MC = [tex]\frac{\delta C(x)}{\delta X}[/tex] = $450
On evaluating the above equation , we get ;
x = 66
i.e. At x = 66
C(66) = $19370
The manufacturer can produce up to 66 units to avoid the marginal cost going beyond $450. The total cost at this level of production is $19,370.
Explanation:To find the most units the manufacturer can produce while still making a profit, we first need to calculate the marginal cost. The marginal cost is the derivative of the cost function C(x) = 5/2x^2 + 120x + 560. Taking the derivative, we get C'(x) = 5x + 120. To find when this equals $450, we solve for x:
5x + 120 = 4505x = 330x = 66Therefore, the manufacturer can produce up to 66 units to ensure that the marginal cost does not exceed $450. To find the total cost at this level of production, we substitute x = 66 into the original cost function:
C(66) = 5/2(66)^2 + 120(66) + 560C(66) = 5/2(4356) + 7920 + 560C(66) = 10890 + 7920 + 560C(66) = 19370Thus, the total cost at this level of production is $19,370.
Grace examines two different size bottles of the same laundry detergent. The price for the 100-ounce bottle is $9.99and the price for the 150-ounce bottle is $12.99. How much money will Grace save per 100 ounces of she purchased the larger bottle
Answer:
It will save $1.33 per 100 ounces
Explanation:
we have to compare the cost of 100 ounces purchasing the larger bottle with the cost of the normal bottle of 100 ounces:
12.99/150ounces x 100ounces = price of 100 ounces
cost of 100 ounces in the larger bottle 8.66
cost of 100 ounces 9.99
cost saving 1.33
Final answer:
Grace will save approximately $1.33 per 100 ounces of laundry detergent by purchasing the larger 150-ounce bottle. Estimated costs are $3.46 for a 40 oz. size and $7.79 for a 90 oz. size, based on the unit price of the 150-ounce bottle.
Explanation:
To calculate the estimated cost per 100 ounces if Grace purchased the larger bottle of laundry detergent, we need to determine the unit price for each size. We then compare the unit price of the larger bottle with that of the smaller to find the savings per 100 ounces.
The unit price for the 100-ounce bottle is $9.99 / 100 ounces, which equals $0.0999 per ounce. For the 150-ounce bottle, it is $12.99 / 150 ounces, which equals approximately $0.0866 per ounce. To find out how much Grace would save per 100 ounces by purchasing the larger bottle, we multiply the difference in unit price by 100:
Savings = (0.0999 - 0.0866) x 100 ounces = $1.33 per 100 ounces.
The estimated cost for other sizes is determined by the same method. For a 40 oz. size: 0.0866 x 40 ounces equals approximately $3.46. And for a 90 oz. size: 0.0866 x 90 ounces equals approximately $7.79.
Which of the following is not a necessary condition for price discrimination to hold? The seller must be a price searcher. The seller must be able to distinguish between customers willing to pay different prices. It must cost the seller more to service some customers than others. Reselling the product must be extremely costly or must not be possible
Answer: Option A
Explanation: Price discrimination is a feature of monopoly firms. Monopoly firms are those firms which provides such goods or services in the market for which no close substitutes are available. As there are no other competitors monopoly firms are free from the burden of adjusting its prices according to others.
Thus to make price discrimination in market the firm has to be a price maker and not price searcher.
The more profitable ________ becomes, the more firms are rewarded for borrowing money to invest in new capital. Thus if capital is perceived as more profitable, the ________ for loanable funds would shift to the ________, driving the equilibrium interest rate ________.
Answer:
The correct answer is: capital; demand; right; up
Explanation:
As the profitability of capital increases, the firms will get more return from investing in capital. So, if the profitability of capital increases, firms will want to invest more in capital. For that they will need funds. Thus, the demand for loanable funds will increase, shifting the curve to right. This increase in demand will further lead to increase in the interest rate.
company must decide whether to buy Machine A or Machine B. After 5 years Machine A will be replaced with another A. The initial cost for Machine A is $12,500, annual maintenance is $1,000, and the salvage value at 5 years is $10,000. Machine B has an initial cost of $20,000, 0 maintenance costs, and a salvage value of $10,000 at 10 years. Which machine should be purchased? Use a MARR of 10%. on financial calculator
Answer: The present value of the Machine B ($16140) is less than that of Machine A ($16338) , so we should purchase Machine B.
Explanation:
Present value of the cost incurred on Machine A :
Given:
Initial capital cost = $12500
Capital cost at 6th year ($12500 - salvage of previous machine $10000) = $2500
Present value of capital cost at (10%,5) = $1553
Maintenance cost = $1000
Present value of Maintenance cost at (10%,10) = $6145
Less: Salvage at the end of Year 10 = $10000
Present value of Salvage cost at (10%,10) = $3860
Total present value of cost in Machine A = $16338
Similarly,
Present value of the cost incurred on Machine B :
Given:
Initial capital cost = $20000
Maintenance cost = $0
Present value of Maintenance cost at (10%,10) = $0
Less: Salvage at the end of Year 10 = $10000
Present value of Salvage cost at (10%,10) = $3860
Total present value of cost in Machine B = $16140
As the present value of the Machine B ($16140) is less than that of Machine A ($16338) , so we should purchase Machine B.
An investment firm has a job opening with a salary of $41,000 for the first year. During the next 29 years, there is a 4% raise each year. Find the total compensation over the 30-year period.
Final answer:
To calculate the total compensation over the 30-year period, calculate the salary for each year using a 4% raise, and then sum them up.
Explanation:
To calculate the total compensation over the 30-year period, we need to find the salary for each year and sum them up.
The salary for the first year is $41,000. For the next 29 years, the salary increases by 4% each year. To calculate the salary for each subsequent year, we can use the formula: Salary = Previous Year's Salary + (Previous Year's Salary * 0.04).
Using this formula, we can calculate the salaries for each year and then sum them up to find the total compensation. Here is an example of how to calculate the salaries for the first few years:
Year 1: $41,000Year 2: $41,000 + ($41,000 * 0.04) = $42,640Year 3: $42,640 + ($42,640 * 0.04) = $44,385.60Year 4: $44,385.60 + ($44,385.60 * 0.04) = $46,239.42To find the total compensation, you would continue this calculation for all 30 years and sum up the salaries.
Your family runs a specialty ice cream parlor, Scoops. It manufactures its own ice cream in small batches and sells it only in pint-sized containers. After someone not affiliated with the company sent six pints of your ice cream to a popular talk-show host, she proclaimed on her national TV show that it was the best ice cream she had ever eaten. Immediately after the broadcast, orders came flooding in, overwhelming your small-batch production schedule and your limited distribution system. The company’s shipping manager thinks she can handle it, but you disagree. List the reasons why you need to restructure your channel of distribution.
Answer:
Demand And Supply
Explanation:
Demand and supply are the biggest factors of buisness when demand becomes higher than supply it results in angry customers and unhappy reviews
The price p (in dollars) and the quantity x sold of a certain product obey the demand equation p equals negative one ninth x plus 200 . What is the domain of R?
Answer: Domain : [tex]0 \leq x\leq 1800[/tex]
Explanation:
Given :
P = [tex]-\frac{1}{9} x+200[/tex]
where;
P is the price in dollars.
x is the quantity sold of a certain product.
The revenue R(x) is given as ;
R(x) = [tex]P\times x [/tex]
Therefore R(x) = [tex]-\frac{1}{9} x^{2} +200x[/tex]
To find the domain of R(x), we set R(x)=0
[tex]-\frac{1}{9} x^{2} +200x[/tex] = 0
[tex]x(-\frac{1}{9} x +200)[/tex] = 0
[tex]x = 0 , x = 1800[/tex]
Domain of x is : [tex]0 \leq x\leq 1800[/tex]
Bracken Corporation is a small wholesaler of gourmet food products. Data regarding the store's operations follow: • Sales are budgeted at $360,000 for November, $380,000 for December, and $380,000 for January. • Collections are expected to be 75% in the month of sale, 24% in the month following the sale, and 1% uncollectible. • The cost of goods sold is 85% of sales. • The company would like to maintain ending merchandise inventories equal to 75% of the next month's cost of goods sold. Payment for merchandise is made in the month following the purchase. • Other monthly expenses to be paid in cash are $22,000. • Monthly depreciation is $19,200. • Ignore taxes. Balance Sheet October 31 Assets Cash $30,000 Accounts receivable, net of allowance for uncollectible accounts 78,000 Merchandise inventory 229,500 Property, plant and equipment, net of $606,000 accumulated depreciation 1,180,000 Total assets $1,517,500 Liabilities and Stockholders' Equity Accounts payable $302,750 Common stock 860,000 Retained earnings 354,750 Total liabilities and stockholders' equity $1,517,500 Expected cash collections in December are:
Final answer:
The expected cash collections in December are $372,400.
Explanation:
To calculate the expected cash collections in December, we need to determine the amount of sales that will be collected in December, the amount that will be collected in the month following the sale, and the amount that will be uncollectible.
Given that sales for December are budgeted at $380,000 and collections are expected to be 75% in the month of sale, 24% in the month following the sale, and 1% uncollectible, we can calculate the expected cash collections in December as follows:
Amount collected in December = $380,000 x 75% = $285,000Amount collected in the month following the sale = $380,000 x 24% = $91,200Uncollectible amount = $380,000 x 1% = $3,800Therefore, the total expected cash collections in December would be $285,000 + $91,200 - $3,800 = $372,400.
10) Tanner Company, a subsidiary acquired for cash, owned equipment with a fair value higher than the book value as of the date of combination. A consolidated balance sheet prepared immediately after the acquisition would include this difference in:A) goodwill.B) retained earnings.C) deferred charges.D) equipment.
Answer:
Out of all the options given, the correct option is
option D). Equipment
Explanation:
Fair values find its use in the consolidated or integrated financial statement.
Fair values can be defined as the cash flows at discounted value.
In the given case, cash is not having any fair value, so the difference will be included in the equipment only
Suppose that you are a member of the Board of Governors of the Federal Reserve System. The economy is experiencing a sharp rise in the inflation rate. What change in the Federal funds rate would you recommend? How would your recommended change get accomplished? What impact would the actions have on the lending ability of the banking system, the real interest rate, investment spending, aggregate demand, and inflation?
As a member of the Federal Reserve Board, in an inflationary situation I would suggest a change in the federal funds rate that would be accomplished by raising the base interest rate of the US economy. This would make bonds more attractive and people would stop consuming to invest in public debt securities. In addition, raising interest rates would discourage credit, causing banks to lend less. Since inflation is a monetary phenomenon caused by the excess of currency in circulation, these measures would have a downward effect on inflation, as they reduce the amount of money in circulation in the economy.
In response to inflation, the Federal Reserve may increase the Federal funds rate which is accomplished through open market operations. This limits the banking system's lending ability, can increase the real interest rate, decrease investment spending and aggregate demand, and eventually control inflation.
Explanation:When the economy is experiencing a sharp rise in inflation, the Federal Reserve (Fed), which you are a hypothetical member of, may recommend an increase in the Federal funds rate. Take for instance Episodes 5 and 6, when the Federal Reserve perceived a risk of inflation, the federal funds rate was raised from 3% to 5.8% from 1993 to 1995.
The change in the Federal funds rate is accomplished through open market operations, specifically by selling government securities, which decreases the amount of money in circulation, thereby raising interest rates. The aim is to slow down economic growth and cool off inflation.
The impact of this action on the banking system would be a reduced ability to lend, as higher interest rates make borrowing costs more expensive for banks. This, in turn, could raise the real interest rate, as the increase in the nominal interest rate (the Federal funds rate) would outstrip the rate of inflation, earning savers a higher real return on their investments. Consequently, higher real interest rates may cause a decrease in investment spending, as the costs of borrowing to fund investment become more expensive. This might result in a decrease in aggregate demand, as lower investment spending and potentially lower consumer spending slow economic growth. Eventually, the aim is to mitigate inflation.
Learn more about Federal Reserve and Inflation here:https://brainly.com/question/3502820
#SPJ11
Now suppose that households in this economy allocate each additional dollar of income in the following way. Households continue to save $0.20 of each additional dollar income; however, they now pay $0.05 in taxes on each additional dollar of income, and they now spend $0.15 of each additional dollar on imported goods. The remaining fraction of each additional dollar goes toward consumption of domestically produced output. In this case, the fraction of an additional dollar of income that is not spent on domestic output is equal to . Taking the impact of taxes and imports into consideration, the multiplier for this economy is .
Answer:
Multiplier= 1.666667
Explanation:
This is an open economy:
So the households can either save the income, or adquire imported goods.
also their income is reduced by taxes, so we must discount the three factors to get the multiplier.
marginal propensity to withdraw (mpw)
saving + tax rate + import
0.2 s + 0.05 t + 0.15 import = .4
Multiplier
1 / (1-mpw) = 1/0.6 = 1.66667
The Dawson Company manufactures small lamps and desk lamps. The following shows the activities per product and the total overhead information: Setups Inspections Assembly (dlh) Small Lamps - 3,000 units 8,000 9,000 16,000 Desk Lamps - 6,000 units 16,000 15,000 12,000 Activity Pool Activity Base Budgeted Activity Cost Setups 24,000 $60,000 Inspections 24,000 $120,000 Assembly (dlh) 28,000 $280,000 Calculate the total factory overhead to be charged to desk lamps.
Answer:
235,000 total overhead
Explanation:
First we calculate the rate for activity
[tex]\left[\begin{array}{cccc}&Cost&Pool&Rate\\Setups&60,000&24,000&2.5\\Inspections&120,000&24,000&5\\Assembly&280,000&28,000&10\\\end{array}\right][/tex]
Next, we apply this rate to desk lamp
[tex]\left[\begin{array}{cccc}&Rate&Desk&Overhead\\Setups&2.5&16,000&40,000\\Inspections&5&15,000&75,000\\Assembly&10&12,000&120,000\\\end{array}\right][/tex]
Total Overhead will be the sum of each activity overhead
40,000.00 + 75,000.00 + 120,000.00 = 235,000 total overhead
The total factory overhead charged to desk lamps is $235,000, calculated by apportioning the costs of setups, inspections, and assembly based on the activity level for each task.
Explanation:To calculate the factory overhead charged on desk lamps, you need to consider the cost attributed to each activity base. Since the cost is distributed based on the activity level, the cost for each activity must be calculated per unit of activity. Then, multiply that rate by the number of each activity performed for desk lamps.
For Setups: $60,000/24,000 setups gives a rate of $2.5 per setup. Given the desk lamps require 16,000 setups, the cost for setups is $2.5 * 16,000 = $40,000.
For Inspections: $120,000/24,000 inspections gives a rate of $5 per inspection. With desk lamps requiring 15,000 inspections, the cost here is $5 * 15,000 = $75,000.
The Assembly (dlh) costs are $280,000/28,000 dlh which results in $10 per dlh. The cost for the 12,000 dlh required by the desk lamps then would be $10 * 12,000 = $120,000.
Adding these costs together ($40,000 + $75,000 + $120,000), the total factory overhead charged to desk lamps is $235,000.
Learn more about cost accounting here:https://brainly.com/question/24130824
#SPJ3
Robert only consumes X and Y, and his indifference curves have the usual convex shape. Consider the consumption bundles (3, 9), (6, 6), and (9, 3) (Hint: The consumption bundles completely exhaust Robert's income). If Robert is indifferent between (3, 9) and (9, 3), then:
Answer: Then consumption bundle (3,9) and (9,3) will lie on the same indifference curve.
Since his consumption bundles completely exhaust his income , therefore the indifference curve will be tangential to the budget constraint.
Explanation:
Given : Robert only consumes X and Y, and his indifference curves have the usual convex shape.
Consumption Bundles (3, 9), (6, 6), and (9, 3).
If Robert is indifferent between (3, 9) and (9, 3), then: consumption bundle (3,9) and (9,3) will lie on the same indifference curve.
Also, since his consumption bundles completely exhaust his income , therefore the indifference curve will be tangential to the budget constraint.
The Silver Center (TSC) produces cups and platters. TSC purchases silver and other metals that are processed into silver alloy that is used to make platters and cups. TSC incurred $40,000 of materials cost and $44,000 of labor cost to produce the silver alloy. Platters are made first and the residual alloy is remixed into a lower grade silver plated material that is used to make the cups. Remixing cost amount to $2,000. The recent batch contained 4,000 platters and 1,000 cups. TSC sold the platters for $100,000 and the cups for $12,000. If relative market value is used to allocate the joint cost, what is the income earned for cups?
Final answer:
The income earned for cups is $9,202.
Explanation:
To calculate the income earned for cups, we need to allocate the joint costs to the cups using relative market value. The total joint cost incurred is the sum of materials cost, labor cost, and remixing cost, which is $40,000 + $44,000 + $2,000 = $86,000.
The relative market value of platters is $100,000 and the relative market value of cups is $12,000. The allocation ratio for cups can be calculated as:
($12,000 / ($12,000 + $100,000)) = 0.107.
The income earned for cups is the allocated joint cost multiplied by the allocation ratio:
$86,000 * 0.107 = $9,202.
10-2. Why is the formal training of workers so important to most employers?
Answer: Formal training is an integral part of employee development. It helps employee to get introduced to the nature of the job.
a) It makes clear to the workers what the employer needs, without which workers may not understand which work should be done on priority basis.
b) It eliminates waste of resources like time, money, etc. If a work is done without any formal training, such work might not be in desired standard; this thing is the waste of money as well as time. Therefore, in order to prevent it the formal training is required.
In rudimentary terms, every firm depends on its workforce to a great extent. After all, it is the people that run the operations of the company.
The employer that provide training to their employees see the following benefits:
Greater productivity ,better cooperation ,continuous growth of employees
and enhanced job satisfaction.
MC Qu. 96 A company's beginning Work... A company's beginning Work in Process inventory consisted of 20,000 units that were 80% complete with respect to direct labor. A total of 90,000 were finished during the period and 25,000 remaining in Work in Process inventory were 40% complete with respect to direct labor at the end of the period. Using the weighted-average method, the equivalent units of production with regard to direct labor were: Multiple Choice 100,000. 90,000. 116,000. 46,000. 76,000.
Answer:
The equivalent units of production with regard to direct labor were 100,000
Explanation:
The computation of equivalent units of production with regard to direct labor is shown below :
= Units Finished + Remaining inventory × percentage
= 90,000 + 25,000 × 40%
= 90,000 +10,000
= 100,000
The opening work in process is irrelevant while computing the equivalent units of production. Thus, it is ignored in calculation part.
Hence, the equivalent units of production with regard to direct labor were 100,000
Suppose that Larimer Company sells a product for $20. Unit costs are as follows: Direct materials $2.10 Direct labor 1.25 Variable factory overhead 2.00 Variable selling and administrative expense 1.05 Total fixed factory overhead is $56,590 per year, and total fixed selling and administrative expense is $38,610. Required: 1. Calculate the variable cost per unit and the contribution margin per unit. 2. Calculate the contribution margin ratio and the variable cost ratio.
Answer:
Contribution Margin 13.6
Contribution Margin Ratio 0.68
Variable Cost ratio 0.32
Explanation:
Sales Price 20
Direct materials 2.10
Direct labor 1.25
Variable factory overhead 2.00
Variable selling and administrative expense 1.05
Total Variable cost 6.4
[tex]Contribution \: per \: unit \times units \: sold = Total \: Contribution \: Margin[/tex]
20 - 6.4 = 13.6 Contribution Margin
[tex]\frac{Contribution \: Margin}{Sales \: Revenue} = $Contribution Margin Ratio[/tex]
13.6/20 = 0.68
[tex]\frac{Variable \: Cost }{Sales \: Revenue} = $Variable Cost Ratio[/tex]
6.4/20 = 0.32
Babble, Inc., buys 405 blank cassette tapes per month for use in producing foreign language courseware. The ordering cost is $11.75. Holding cost is $0.11 per cassette per year. a. How many tapes should Babble order at a time? Babble should order nothing tapes at a time. (Enter your response rounded to the nearest whole number.) b. What is the time between orders? The time between orders is nothing months. (Enter your response rounded to one decimal place.)
Answer:
(A) EOQ = 1019
(B) Time between Order = 2.5 months
Explanation:
Economic Order Quantity
This formula give us the quantity order with the fewer cost.
[tex]eoq = \sqrt{ \frac{2ds}{h} } [/tex]
Where
d = annual demand = 405 X 12 = 4860
s= supply cost or ordering cost = 11.75
h= holding cost= 0.11
[tex] \sqrt{ \frac{2 \times 4860 \times 11.75}{0.11} } = 1018.9566[/tex]
EOQ = 1019
Next, we need to know when to order:
[tex]eoq \div \frac{demand}{12 \: months} = time \: per \: order[/tex]
[tex]1019 \div \frac{4860}{12} = 2.516[/tex]
the ratio give us an idea of the consumption rate per month. we then divide the EOQ by this to know how many time between order we can have.
The number of tapes Babble should order, and the time period between orders can be calculated using the Economic Order Quantity (EOQ) model and the Time Between Orders (TBO) formula. By substituting the given values into these formulas, the desired values can be obtained.
Explanation:To solve this problem, we need to use the Economic Order Quantity (EOQ) model in inventory management. The EOQ is the number of units that a company should add to inventory with each order to minimize the total costs of inventory—such as holding costs, order costs, and shortage costs.
The formula for EOQ is: EOQ = √ [(2 * D * S) / H]. Where D is the demand rate, S is the order cost, and H is the holding cost.
Substituting the given values into the formula, we get: EOQ = √ [(2 * 405 * 11.75) / 0.11]. Solving this equation we get the number of tapes Babble should order at a time.
For the time between orders we need to calculate: TBO = D / EOQ. This will give us the time period between orders in months. It's important to note that TBO is typically in the same time interval as demand rate. Here, D is in months, so TBO will also be in months.
Learn more about Inventory Management here:https://brainly.com/question/33751079
#SPJ3