Answer:
Not between significant digits.
Explanation:
A zero not significant when it's not between significant digits.
Answer:
Zero are not significant when indicating the decimal point position
Explanation:
The number zero has a special meaning with respect to its meaning, when it is placed to the right as a decimal, its meanings so precision measurements were made, for example 10 cm and 10.0 cm, the first one has an accuracy of one centimeter and the second has an accuracy of 0.1 cm.
In the case of being placed to the left of all numbers, the meaning is to indicate where the decimal point goes, but it does not give information about the accuracy of the measurement, in this second case the zeros are not significant, for example: 0.1 0.0001 in these two cases are not significant
Which factors can most directly affect the motion of a spring? Check all that apply. the color of the spring the stiffness of the spring the mass of the spring itself the force applied to the spring the distance the spring is stretched
Answer:
-THE STIFFNESS OF THE SPRING
-THE FORCE APPLIED TO THE SPRING
-THE DISTANCE THE SPRING IS STRETCHED
Explanation:
Spring stiffness applied force, and stretched distance can most directly affect the motion of a spring.
What is spring force?The force required to extend or compress a spring by some distance scales linearly with respect to that distance is known as the spring force.
Its formula is
F = kx
The factors can most directly affect the motion of a spring:
The stiffness of the spring.
The forces applied to the spring.
The distances the spring is stretched.
Hence, spring stiffness applied force, and stretched distance can most directly affect the motion of a spring.
To learn more about the spring force refer to the link;
https://brainly.com/question/4291098
#SPJ2
A novelty golf ball of mass m is launched with an initial velocity v0 = (25i + 13j) m/s and then follows a parabolic trajectory. At the top of the ball’s trajectory, it explodes into two fragments A and B. Fragment A has mass mA = 1/3 m and is stationary immediately after the explosion, while Fragment B has mass mB = 2/3 m and has non-zero velocity vB immediately after splitting from Fragment A. In answering the following questions, ignore air resistance and assume the terrain over which the ball and fragments fly is level.(a) How many seconds after the launch does the ball attain its maximum height? (b) What is the velocity v of the ball immediately prior to the explosion? (c) What is the velocity of Fragment B immediately before it hits the ground?
Explanation:
(a)
The initial vertical velocity is 13 m/s. At the maximum height, the vertical velocity is 0 m/s.
v = at + v₀
0 = (-9.8) t + 13
t ≈ 1.33 s
(b)
Immediately prior to the explosion, the ball is at the maximum height. Here, the vertical velocity is 0 m/s, and the horizontal velocity is constant at 25 m/s.
v = √(vx² + vy²)
v = √(25² + 0²)
v = 25 m/s
(c)
Momentum is conserved before and after the explosion.
In the x direction:
m vx = ma vax + mb vbx
m (25) = (⅓ m) (0) + (⅔ m) (vbx)
25m = (⅔ m) (vbx)
25 = ⅔ vbx
vbx = 37.5 m/s
And in the y direction:
m vy = ma vay + mb vby
m (0) = (⅓ m) (0) + (⅔ m) (vby)
0 = (⅔ m) (vby)
vby = 0 m/s
Since the vertical velocity hasn't changed, and since Fragment B lands at the same height it was launched from, it will have a vertical velocity equal in magnitude and opposite in direction as its initial velocity.
vy = -13 m/s
And the horizontal velocity will stay constant.
vx = 37.5 m/s
The velocity vector is (37.5 i - 13 j) m/s. The magnitude is:
v = √(vx² + vy²)
v = √(37.5² + (-13)²)
v ≈ 39.7 m/s
an electric clothes dryer has a resictance of 16 Ohms it drawes 15 A of current what is the voltage in volts of the wall outlet that it is pluged into
Answer:
V=240 volts
Explanation:
V=IR
V=15*16
If the wavelength of orange light is 6 · 10-7 m, calculate its frequency. f = _______ Hz
Answer:
Frequency of orange light = [tex]5 \times 10^{14}[/tex] Hz
Explanation:
We are given the wavelength of the orange light and we are to find the value of its frequency.
Wavelength of orange light = [tex]6.0 \times 10^{-7} m[/tex]
We know that:
Speed of light = Frequency of orange light × Wavelength of orange light
Substituting the values in the above formula:
[tex]3 \times 10^8[/tex] = Frequency of orange light × [tex]6.0\times10^{-7}[/tex]
Frequency of orange light = [tex]\frac{3 \times 10^8}{6\times10^{-7}} =5 \times 10^{14}[/tex] Hz
Which of the following are similarities between nuclear reactors and nuclear
bombs?
!!!! check all that apply !!!
A- both have critical mass
B- both produce exactly one additional fission for each fission
C- both are runaway fission reactions
D- both use chain reactions
Answer:
A. both have critical mass
D. both use chain reactions
Apex.
Answer:
A & D
Explanation:
What is the relationship between amplitude and volume?
Answer:
Explanation:
The sound moves in the form of waves. The amplitude is the distance between the highest and the lowest point of a wave. In this way the amplitude indicates the amount of energy that a sound signal contains.
Intensity is the amount of acoustic energy that a sound contains. Intensity is measured in decibels. Volume is a measure of the energy that a signal carries, being a magnitude of intensity.
In this way it is possible to say that the energy of a signal is closely related to its amplitude, but its development over time is also important.
The tone or height is the quality that distinguishes between a high or low sound and a low or high sound.
plz.. help me this out I am from nepal actually it is math
Answer:
tan (x eˣ) + C
Explanation:
∫ (eˣ + x eˣ) / (cos² (x eˣ)) dx
First, use u-substitution.
u = x eˣ
du = (eˣ + x eˣ) dx
∫ 1 / (cos² u) du
∫ sec² u du
tan u + C
Substitute back:
tan (x eˣ) + C
- A ship's total weight is equal to the weight of the water it displaces. If you want to calculate the
ship's weight, you must first know
a. the volume of water in the lake or ocean in which the ship is floating.
b. the volume of the entire ship.
c. the volume of the part of the ship that lies below the water's surface.
d. All of the above
Answer:
c. the volume of the part of the ship that lies below the water's surface.
Explanation:
As stated in the problem, Archimedes' Principle tells us that that buoyant force on an object is equal to the weight of fluid it displaces. The volume of water that a ship displaces is the volume it occupies below the surface.
A cannonball is fired on flat ground
at 420 m/s at a 53.0° angle. What
maximum height does it reach?
hmax = 5740.48 m. The maximum height that a cannonball fired at 420 m/s at a 53.0° angles is 5740.48m.
This is an example of parabolic launch. A cannonball is fired on flat ground at 420 m/s at a 53.0° angle and we have to calculate the maximum height that it reach.
V₀ = 420m/s and θ₀ = 53.0°
So, when the cannonball is fired it has horizontal and vertical components:
V₀ₓ = V₀ cos θ₀ = (420m/s)(cos 53°) = 252.76 m/s
V₀y = V₀ cos θ₀ = (420m/s)(cos 53°) = 335.43m/s
When the cannoball reach the maximum height the vertical velocity component is zero, that happens in a tₐ time:
Vy = V₀y - g tₐ = 0
tₐ = V₀y/g
tₐ = (335.43m/s)/(9.8m/s²) = 34.23s
Then, the maximum height is reached in the instant tₐ = 34.23s:
h = V₀y tₐ - 1/2g tₐ²
hmax = (335.43m/s)(34.23s)-1/2(9.8m/s²)(34.23s)²
hmax = 11481.77m - 5741.29m
hmax = 5740.48m
Answer:
5740.48
Explanation:
Which term best describes the phrase "the best explanation that science has
to offer"?
A. Theory
B. Law
C. Experiment
D. Observation
The term 'Theory' best describes the phrase as it refers to a well-substantiated explanation of some aspect of the natural world, that has been repeatedly tested and confirmed through the scientific method.
Explanation:The term that best describes the phrase 'the best explanation that science has to offer' is Theory. In scientific terms, a 'theory' is more than just a guess. It is a well-substantiated explanation of some aspect of the natural world that is acquired through the scientific method, and repeatedly tested and confirmed through observation and experimentation.
Laws are generally observed patterns that apply universally. Experiments are practical procedures undertaken to derive or validate a fact, and Observation is the act of gathering and analyzing data. These are all integral components of scientific investigation, but the term 'theory' is the one that aligns most closely with 'the best explanation'.
Learn more about Theory here:https://brainly.com/question/31772968
#SPJ2
Driving to work one morning, you get a flat tire. When using the car jack, you apply 120 N of force to the jack and the jack in turn applies 2000 N of force to lift the car up. What is the mechanical advantage of the jack?
Explanation:
Mechanical advantage is the ratio of output force to input force.
MA = 2000 N / 120 N
MA = 16.67
Round as needed.
Answer:MA = 2000 N / 120 N
MA = 16.67
Explanation:
If the change in velocity increases, what happens to the acceleration during the same time period?
Acceleration decreases.
O Acceleration increases
Acceleration becomes negative.
O Acceleration becomes steady
Fast plz and it’s not becomes steady
Answer:
B
Explanation:
Took on Edge 2022
Which waves can travel only through solids?
Answer:
S- waves
Explanation:
S- waves are known as secondary waves or shear waves. They only propagate through solid medium only.
S- waves are elastic seismic waves that propagates transversely moving materials perpendicularly along their direction. In the process, they cause shearing. Only solids have enough shear strength to withstand the movement of s-waves without getting altered. Liquids and gases cannot shear and would not allow s-waves to propagate through them.
A soccer ball is traveling at a velocity of 50 m/s The kinetic energy of the ball is 500 J What is the mass of the secer bort?
Answer: 0.4
Explanation:
the Answer is 0.4 which is c
Rony fills a bucket with water and whirls it in a vertical circle to demonstrate that the water will not spill from the bucket at the top of the loop. If the length of the rope from his hand to the centre of the bucket is 1.24 m, what is the minimum tension in the rope (at the top of the swing)? How slow can he swing the bucket? Explain your answer.
Answer:
0 N, 3.49 m/s
Explanation:
Draw a free body diagram for the bucket at the top of the swing. There are two forces acting on the bucket: weight and tension, both downwards.
If we take the sum of the forces in the radial direction, where towards the center is positive:
∑F = ma
W + T = m v² / r
The higher the velocity that Rony swings the bucket, the more tension there will be. The slowest he can swing it is when the tension is 0.
W = m v² / r
mg = m v² / r
g = v² / r
v = √(gr)
Given that r = 1.24 m:
v = √(9.8 m/s² × 1.24 m)
v = 3.49 m/s
A boy Is it running with a kinetic energy of 810 J. If the boy has a mass of 80 kg what is his speed
Answer:
10.125
Explanation:
Answer:
4.5 m/s
Explanation:
Kinetic energy is:
KE = ½ mv²
where m is mass and v is velocity.
Given KE = 810 J and m = 80 kg:
810 J = ½ (80 kg) v²
v = 4.5 m/s
Which compound is an unsaturated hydrocarbon?
cyclobutane
isopropane
ethyne
pentane
Answer:
i believe it is isopropane. sorry if this isnt helpful, but i believe thats correct
Explanation:
Answer:
Ethyne
Explanation:
gradpoint
Affirmations and strokes relate to the power of adult
If a person weighs 90 N on Earth, and the gravitational acceleration due to Jupiter's gravity is 25.98 m/s2, how much would the person weigh on Jupiter?
A. 3.46 N
B. 238.59 N
C. 882.00 N
D. 2338.20 N
Answer:
B. 238.59 N
Explanation:
First, use their weight on Earth to find their mass:
W = mg
90 N = m (9.8 m/s²)
m = 9.18 kg
Now use this mass to find the new weight on Jupiter.
W = mg
W = (9.18 kg) (25.98 m/s²)
W = 238.59 N
Is mechanical energy conserved as a playground swing moves? Why or why not?
Answer:NO
Explanation:
No, because as it swings it is mechanical energy that changes from almost completely potential energy to almost completely kinetic energy and thermal and sound.
Which statement is true?
ACombustion engines burn gasoline, a renewable resource, to power a vehicle.
BHydroelectric dams use the energy from blowing wind to generate electricity.
C Many power plants burn fossil fuels, a renewable resource, to generate electricity.
D Natural gas can be burned, producing hot gases that turn turbines to generate electricity.
This is kind of an awkward situation.
A, B, and C are definitely false:
A ... gasoline is not a renewable resource
B ... hydroelectric dams don't use wind for anything; windmills do
C ... fossil fuels are not renewable resources
So that leaves D, but D is partly absurd too.
Natural gas burning does not produce gases to turn the turbines. Natural gas is burned to produce HEAT, just like on the stove in my kitchen. The heat is used to boil water, and the steam from the boiling water is what turns the turbines to generate electrical energy.
But I guess you gotta pick choice-D as the answer.
The answer is D. Natural gas can be burned, producing hot gases that turn turbines to generate electricity.
The maximum speed of a 4.1 kg mass attached to spring is 0.78 m/s and the maximum force exerted on the mass is 13 N.
(a) what is the amplitude of motion for this mass?
(b) what is the force constant of the spring?
(c) What is the frequency of this system?
Start with the conservation of energy. The spring potential energy and the mass' kinetic energy will fluctuate over time, but their sum will stay constant. The maximum spring potential energy equals the maximum kinetic energy.
0.5mv² = 0.5kx²
m is the mass, v is the maximum velocity, k is the spring constant, and x is the maximum displacement along the spring.
Given values:
m = 4.1kg
v = 0.78m/s
Calculate the maximum kinetic energy.
Max KE = 0.5mv² = 1.247J
Set this equal to the maximum spring potential energy.
Max spring PE = 0.5kx² = 1.247J
x² = 2.494/k
The spring force is F = kx
Max F = kx = 13N
x = 13/k
x² = 169/k²
Set both values of x² equal to each other and solve for k the spring constant:
2.494/k = 169/k²
2.494k = 169
k = 67.8N/m
Use k to find x:
Max F = kx = 13N
67.8x = 13
x = 0.192m
The frequency of the system is given by:
f = (1/(2π))√(k/m)
f is the frequency, k is the spring constant, m is the mass.
f = (1/(2π))√(67.8/4.1)
f = 0.647Hz
The amplitude is the maximum distance from the mean position. The amplitude for the motion for the given mass is 2.658 m.
From the formula of Maximum velocity :
[tex]V_{max } = 2\pi fA[/tex]
For Amplitude:
[tex]A = \dfrac { V_{max}}{2\pi f} [/tex]
Where,
[tex]V_{max } [/tex] - maximum velocity of the mass = 0.78 m/s
[tex]f[/tex] - force exerted on the object = 13 N
[tex]A[/tex]- amplitude = ?
Put the values in the formula and solve it for [tex]A[/tex],
[tex]A = \dfrac {13 }{2\pi \times 0.78 } \\\\ A = \dfrac {13}{4.89}\\\\ A = 2.658[/tex]
Therefore, the amplitude for the motion for the given mass is 2.658 m.
Learn more about the amplitude:
https://brainly.com/question/9351212
Which of the following are likely to form a covalent bond?
gold and gold
oxygen and oxygen
magnesium and oxygen
magnesium and gold
When you see your reflection in a flat (plane) mirror, how does the size of the
image compare with the size of the object (you)?
same
the size of image is the same with object in reflection
Answer: the size of the image will be the same as the object.
Explanation: image formed by plane mirror is:
1. Same size as the object
2. Laterally inverted
3. Form behind the mirror
4. Virtual
5. Same distance as the object from the mirror
an aeroplane is flying at 1960m with velocity of 600km/hr. a bomb is dropped at some point A while it reaches at B.the distance between A and B is how much
Answer:
3.33 km
Explanation:
Use the plane's height to find the time it takes for the bomb to land.
y = y₀ + v₀ t + ½ gt²
0 = 1960 + (0) t + ½ (-9.8) t²
t = 20
Now use the horizontal velocity to find the horizontal distance traveled. But first, convert km/hr to m/s:
600 km/hr × (1000 m / km) × (1 hr / 3600 s) = 166.67 m/s
x = x₀ + v₀ t + ½ at²
x = 0 + (166.67) (20) + ½ (0) (20)²
x = 3333.33
The distance between A and B is 3.33 km.
Answer:
3.33 km
Explanation:
An aeroplane is flying at 1960m with velocity of 600km/hr and a bomb is dropped at some point A while it reaches at B.the distance between A and B is 3.33 km.
What happens to energy “lost” during an energy transformation?
Energy loss. Figure 1. Energy losses in an incandescent light bulb are very large; most of the input energy is lost in the form of heat energy. When energy is transformed from one form to another, or moved from one place to another, or from one system to another there is some energy loss.
There is some energy loss when it is changed from one form to another, and relocated from one location to another.
What is energy?Energy is a quantifiable quality that may be transferred to a body or a physical system and is noticeable when labor is done as well as when heat and light are produced.
An incandescent light bulb has significant energy losses; the majority of the input energy is dissipated as heat energy. There is some energy loss when it is changed from one form to another, relocated from one location to another, or moved from one system to another.
There is some energy loss when it is changed from one form to another, relocated from one location to another, or moved from one system to another. This implies that some of the incoming energy is transformed into a highly disordered form of energy, such as heat, when energy is transformed into a new form.
To know more about energy follow
https://brainly.com/question/13881533
#SPJ6
What is the force that can cause two pieces of iron to attract each other?
A.
gravitational force
B.
magnetic force
C.
elastic force
D.
electrostatic force
Answer:
B. Magnetic Force
Explanation:
two pieces of irons cannot attract each other unless at least one of them is magnetize. That force is called magnetism.
QUESTION 6
The number of strawberries on a strawberry plant and the amount of water the plant recieves have a direct relationship. The the amount of water the plant receives increases, how will the number of strawberries on the plant change?
Decrease
Increase
No change
Increase and decrease in a regular pattern
Answer:
Increase. As the water increases, so will the strawberries if watered evenly throughout
A turbine is an example of which of the following?
A.
motor
B.
generator
C.
transformer
D.
magnet
Answer:
B. Generator
Explanation:
A turbine (meaning "turbulence") is a rotary mechanical device that extracts energy from a fluid flow and converts it into useful work. The work produced by a turbine can be used for generating electrical power when combined with a generator So I prefer to go with option B. generator
Answer:
B. Generator (for Plato/Treca)
Explanation:
A turbine spins to create electricity, therefore, making it a generator.
The spectra for elements are _____.
all the same
the same for a chemical family
the same for elements with similar mass
all different and specific to each
Answer:
D) all different and specific to each
Explanation:
I just finished the test.