Answer:
(C) Winter solstice
Explanation:
Sydney, and all of Australia, are located in the Southern Hemisphere. This means that the changes in the seasons and the position of the sun on the sky for that matter are the opposite of the ones in the Northern Hemisphere. The summer period in the Southern Hemisphere starts on December 21st, unlike the Northern Hemisphere where it starts on June 21. The reason why the summer starts n this date is because in this period the Southern Hemisphere is more exposed to the sun, as the Earth is tilted with its southern half towards it. This resulted in higher exposure to the sun, increased temperatures because of it, and the sun being the highest on the sky during the winter solstice. On the other hand, the sun will be the lowest on the sky during the summer solstice, as the Southern Hemisphere is tilted away from the sun during that period.
Briefly discuss three properties of minerals that are useful for identification.
Answer:
A mineral has certain characteristics that helps in distinguishing from one mineral to another. There are various properties that enables to identify these mineral. Three of the mineral properties for mineral identification are as follows-
(1) Color- It is one of the primary property. Minerals appears to be in different colors and these colors forms under different conditions. These colors ranges from dark to light colored. For example, the color of olivine is olive green in color.
(2) Luster- It is the property that describes how light is reflected from the crystal's surface. DIfferent minerals have different lusters. Lusters are of various types such as metallic, non metallic, dull, pearly and earthy luster. For example, pyrite has a metallic type of luster.
(3) Hardness- It is defined as the mineral's resistance to breaking. The hardness varies from mineral to mineral. According to the Mohr's hardness scale, the hardness of minerals ranges from 1 to 10. For example, diamond has a hardness of 10.
3a.What are the rules of the Coriolis Effect?
b.Be able to indicate the direction that wind will move in the upper and lower atmosphere, in the northern and southern hemisphere, around high and low pressure systems.
Answer:
(A) The Coriolis force is the force that acts on an object due to the rotation of the earth. The basic rule of this force is that it causes the deflection of wind when it blows from one place to another. The magnitude of this Coriolis force directly depends upon the latitude at which the object is located. This force is maximum at the poles and minimum at the equator.
(B)- Correct answer is Option (2) i.e this force can indicate the wind direction in the northern and southern hemisphere,
When the air in a particular area becomes warm due to heating, then it becomes less dense and rises up. This area forms a low pressure zone. This low pressure zone is filled with the air from the high pressure zone. The wind that blows from the region of high pressure to the region of low pressure does not move in a straight line. Due to the Coriolis force, this wind gets deviate and reaches the low pressure zone.
Thus, this force indicates the direction from which a wind blows in both the southern and the northern hemisphere. In the southern direction it moves in anticlockwise direction, whereas in the northern hemisphere it moves in clockwise direction.
Why are nighttime mixing ratios of ozone always nonzero in the background troposphere (think of rural areas) but sometimes zero in urban areas?
Answer:
The newly transmitted toxins blend with different poisons, including ozone, present in foundation air, and a confounded procedure of synthetic responses and nonstop weakening happens.
Introduction to ozone instigates impacts on well being and the earth, causing respiratory challenges in touchy individuals and conceivable harm to vegetation and biological systems.
Night time mixing ratios are always nonzero in the background troposphere but sometimes zero in urban areas.
Photo chemical pollution is formed from emissions of nitrogen oxides [tex](NO_x, where NO_x = NO + NO_2)[/tex] and of volatile organic compounds (VOCs) and carbon monoxide (CO) in the presence of sunlight.
Final answer:
At night, the background troposphere maintains nonzero ozone levels due to consistent low-level production and fewer pollutants that destroy ozone, whereas urban areas may have zero ozone levels at times because nighttime reactions can consume ozone without the presence of sunlight to produce more.
Explanation:
The presence of nighttime mixing ratios of ozone being nonzero in rural areas but sometimes zero in urban areas is due to differences in ozone production and destruction processes. In the background troposphere, ozone is produced by the interaction of sunlight with oxygen molecules and various pollutants such as volatile organic compounds (VOCs) and nitrogen oxides (NOx) which are less prevalent in rural areas. This results in a constant, albeit low, level of ozone at night.
In contrast, urban areas have higher concentrations of these pollutants due to more motor vehicle exhaust, industrial emissions, and higher energy consumption leading to more intense photochemical reactions. This can lead to higher daytime ozone levels. However, at night, the lack of sunlight halts the production of ozone, and urban areas may have more substances that react with and consume ozone, such as nitric oxide (NO), which can lead to occasionally zero ozone levels at night. The nocturnal ozone levels in urban areas can be more variable due to these factors.
Who did not step in the moon in the mission of Apollo 11?
Answer:
Michael Collins
Explanation:
Among the three astronauts that went in the Appolo 11 mission to moon. Two of them landed their foot on the moon surface while one of them remained in the lander. His name was Michael Collins.
Michael Collins was command module pilot. While Neil Armstrong and Buzz Aldrin were the other two. Neil Armstrong Was the first to land his foot on the lunar surface.
All of the following are base units of the SI system except:
kilogram
kelvin
meter
pound
liter
Answer:
pound
liter
Explanation:
The SI system is the system of measurement that is the most widely used around the world. It is actually the modern day version of the metric system. The majority of the countries in the world use this measuring system, but there are few that don't, such as the United States, Liberia, and Myanmar (Burma). Canada and the United Kingdom are kind off in an in between situation, as they have this system as official, but the population still very often uses other measurements that are tradition, often leading to confusion.
This measuring system has seven base unites:
second (s) - measures time
meter (m) - measures length
kilogram (kg) - measures mass
ampere (A) - measures electric current
kelvin (K) - measures temperature
mole (mol) - measures amount of substance
candela (cd) - measures luminous intensity
Is it fair for the industrialized nation to expect that all nations, including the less developed ones, restrict there use of fossil fuels and therefore participate in future disadvantages without obtaining the benefits of cheap energy or do you think the industrialized nations which have enjoyed the past benefits, should accept most of the future cost
Answer and Explanation:
As an issue of equity of individual and nation legal. Everyone is similarly from this point of view created nations or industrialized nations which have just utilized such an extensive amount petroleum product and contribute parcel to carbon discharges and environmental change ought to need to quit utilizing those oil diesel coal and so on stuffs, rather then less created nations who haven't get an opportunity to utilize them and now individuals of those nations could be profited around business sectors of these stuffs.
It's just a question of rich and poor nations so according to the matter of equity poor and undeveloped nations should likewise given possibility. Also, ought to be dealt with similarly.
On other hand rich and create nations ought to be prohibited on utilizing these petroleum products according to natural concerns. Cash doesn't give a rich individual or nation ideal to decimate and hurt condition for claim benefits.
Hence it's absolutely unfair for the industrialized country to anticipate that all countries, including the less created ones, confine there utilization of petroleum derivatives and along these lines take an interest in future detriments without acquiring the advantages of modest vitality rather the industrialized countries which have delighted in the past advantages, ought to acknowledge a large portion of things to come cost or quit utilizing them.
Determining the fairness of expecting all nations to restrict fossil fuels is complex, involving issues of economic development, environmental protection, and global responsibility. High-income nations have historically contributed more to greenhouse emissions and there is a debate whether they should bear more costs. Countries need to negotiate to balance development needs with environmental stewardship, addressing both ethical and practical considerations.
Explanation:The question of whether it is fair for industrialized nations to expect all nations to restrict the use of fossil fuels and participate in environmental protection efforts without the same economic benefits that richer countries enjoyed during their development is complex. These issues touch upon notions of fairness, development, and global responsibility. Historically, high-income countries have been the primary contributors to greenhouse gas emissions through the burning of fossil fuels, leading to a debate about whether they should bear a greater burden in the transition to cleaner energy and support for low-income countries to aid in their development while protecting the environment.
Furthermore, this debate encompasses the realistic aspects of international negotiations and the global consumption of resources. The challenges in reaching an equitable agreement that takes into account the needs and responsibilities of different nations are significant. There is a moral argument that richer nations should assist poorer ones, as previously they profited from environmental degradation that now disproportionately affects those less developed countries. The need for a cohesive global strategy to effectively mitigate climate change and environmental degradation is critical.
Less developed nations point out that while they aspire to similar economic development, asking them to prioritize environmental concerns over urgent needs such as health care, education, and an adequate diet can be problematic. Thus, questions about distributional justice and the capacity of poorer nations to contribute to global environmental goals without hindering their own development remain salient and unresolved.
Two tectonic plates are diverging along a Mid-Oceanic Ridge. Which of the following features would NOT be found along that type of plate boundary?
a. Shallow earthquakes
b. Strong, deep earthquakes
c. Rifting and Normal Faulting
d. Symmetrical "stripes" of positive and negative magnetism parallel to the ridge
e. New crust being created directly from the mantle
f. Transform boundaries perpendicular to the ridge
g. Fissure volcanoes
Answer:
In a Mid-Ocean Ridge we are not going to find Strong, deep earthquakes
Explanation:
A Mid-Ocean Ridge is produced by divergence between plates, what generates a rift zone with normal faults; this kind of faluts are the result of tensional stress, that makes blocks to fall. When blocks are falling, they can produce some shallow earthquakes.
As plates are separating, there is growing a space between them and this allows magma to arrive to the surface, creating fissure volcanoes that are being part of the new crust that is being created. When rocks get cold, their magnetic minerals get oriented to the magnetic north, for that reason, as magma (next rocks) is being desposited at both sides of the ridge, we can find symmetrical stripes of positive and negative magnetism parallel to the ridge.
When ridges break up because of stress differences in the different segmentes, transform boundaries appear to conect all the ridge. On transform boundaries the displacement is horizontal, for that reason the are perpendicular to the divergent boundaries.
The Strong and deep earthquakes are not going to find under Mid-Ocean Ridge.
What is a Mid-Oceanic Ridge?A mid-ocean ridge refers to a seafloor mountain system which is constituted by plate tectonics.
It has an extent of about 2,600 meters and arises about 2,000 meters preceding the deepest percentage of an ocean basin. This dimension is where seafloor dispersive takes place along a different plate boundary.
It is created by separation between plates, which creates an opening zone with average faults. This kind of faults are the outcome of tension stress, that makes blocks to fall. They can produce some shallow earthquakes, when blocks are gone down,
There is growing a space between them and this allows magma to arrive to the surface, As plates are separating. And creates fissure volcanoes that are being portion of the new layer that is being created.
When rocks get cold, we find symmetrical stripes of positive and negative attraction parallel to the ridge and New crust being created directly from the mantle.
Therefore, option A is correct.
Learn more about Ridge, refer to:
https://brainly.com/question/23027321
A common radio wavelength observed coming from astronomical objects is 21 cm. what temperature is associated with this radiation? 1st attempt See Hint Feedback 13.8
Final answer:
The 21 cm line in radio astronomy is significant for studying hydrogen in space; it has a wavenumber of about 4.76 m-1, an ordinary frequency of approximately 1.43 GHz, and an angular frequency around 8.98 × 10^9 rad/s. Long wavelengths are often emitted by cold, extended objects such as gas clouds, whereas short wavelengths are indicative of hot, energetic environments.
Explanation:
The 21 cm line is an important radio wave in radio astronomy, originating from the transition between the hyperfine levels of the ground state in neutral hydrogen. This specific wavelength allows astronomers to measure the galaxy's structure and motion. To calculate the wavenumber, you divide 1 by the wavelength in meters, which for 21 cm (0.21 m) gives us a wavenumber of approximately 4.76 m-1.
To find the ordinary frequency, you divide the speed of light by the wavelength in meters: frequency = c / λ = (3 × [tex]10^{8}[/tex]m/s) / (0.21 m) ≈ 1.43 GHz. The angular frequency is given by 2π times the ordinary frequency, which is about 8.98 × 109 rad/s.
Objects emitting radiation at very long wavelengths, like the 21 cm line, are typically large, cold structures such as gas clouds, while short wavelength radiation can be associated with very hot, energetic events like supernovae or accretion disks around black holes.
which of the following characteristics suggests that an Air Mass is "mP"?
Source region is the Arctic basin and Greenland ice cap
Associated with Occasional periods of clear, cool weather in summer
Associated with low clouds and showers in winter
Unstable in winter; stable in summer
Warm and humid entire year
Answer:
Maritime Polar air masses are cool, moist, unstable thus found over Arctic basin and greenland ice caps.
Explanation:
Air mass is the volume of air defined by temperature and water vapor. Covering hundred and thousands of miles. Cooler are being found over the arctic. They move southwards along the Rockies into the plains then eastwards. These air masses collect warm and mist winds, originating in north Atlantic. The center of the air mass has high pressure and surrounded by lower air pressure at higher latitudes. Antarctica and arctic circle are dominated by such air massesAn 'mP' or maritime Polar air mass comes from the Arctic basin and Greenland ice cap. It brings clear, cool weather in summer and includes low clouds and showers in winter. It's usually unstable in winter but stable in summer.
Explanation:The characteristics that suggest an Air Mass is 'mP' or maritime Polar include the source region being the Arctic basin and Greenland ice cap. It is also associated with occasional periods of clear, cool weather in the summer and low clouds and showers in winter. Maritime Polar air masses are generally unstable in winter and stable in the summer. However, they are not typically warm and humid the entire year.
Learn more about mP Air Mass here:https://brainly.com/question/31539458
#SPJ6
Question 10 1pts Gravitational pull that causes things to turn right in the Northern Hemisphere; is known as the Air Pollution Coriolis Effect Conveyor Belt Jet Stream
Answer:
Gravitational pull that causes things to turn right in the Northern Hemisphere is known as Coriolis Effect
Explanation:
The spinning of the earth around the sun its planetary orbit causes the seasons day and night and temperature reversals. Tilt in the earth of 23.5 is mainly due to the earth is a geoid and the elliptical shape of the planet causes it to have 365 days around one year. Coriolis force is a force created due to the rotation of the earth and northern winds are deflected towards the right side and winds coming from the equator in the southern hemisphere to the left side of the globe. The winds are thus being called as planetary winds and westerlies and easterlies are found in this equatorial belts of mid-latitudes. This force is the largest force created by the gravitational pull of earth with an average rotational speed of 460 meters per second.How is it possible for clouds at different altitudes to be moving in different directions?
Answer:
Answered
Explanation:
Clouds move in opposite directions between the wind ,usually change direction with increasing height above the ground.
For example:- low-level clouds behind a cold frontal passage move to an area from the North East, whereas the winds aloft along with mid- and high-level clouds behind the front as still from the South West.
In the Northern Hemisphere, when the wind change direction from the surface to aloft in a clockwise (counter-clockwise) direction it is called ‘veering’ (‘backing’).
The veering (backing) vertical wind profile generates upward (downward) vertical motion warm (cold) air convection and dynamic instability.
Question 20 Is Pluto more similar to the terrestrial planets or to these moons?
Answer:
Pluto is more to the terrestrial planet as it has a rocky core and not a gas ball like the sun.
Explanation:
Pluto is more like Europa, a satellite of Jupiter, as these terrestrial planets have several satellites pluto also has five satellites biggest of them is Charon. Unlike the other giant spheres, pluto is a dwarf planet. Like earth, pluto also has natural greenhouse gas methane. Also like terrestrial planets, pluto has an orbital period is about 248 years. Like other planets, pluto has an axial tilt of 120 degrees. Creatures can be found on the surface some are volcanic and others are tectonic being induced by the internal heat. Its core like the earth is made up of rocky mass surrounded by the mantel.what is the azimuth of the sun at sunrise on the Vernal Equinox? At what other day during the year is the azimuth of the sun the same at sunrise?
Answer:
March equinox is day during the year when all the daylight of the sun is asme at sunrise and sunset.
Explanation:
Equinox is the time when the plane of the earth passes through the centre of the sun. Occurring around 23 March and 23 Sept. The vernal equinox is also called as the spring equinox. The azimuth of the sun is the angle of the sun's position defined by the relative direction along the horizon. However the most commonly followed convection for analyzing the sun radiation is 90 degrees east, south 180 degrees and west is 270 degrees. As sunrise and sunset are defined by the upper limb of the solar disk. These conditions produce patterns of night and day as the sun appears to move just above the horizon at an angle of 0.39 degrees per day as the equinox passes.Question 17 The Earth's average density is 5.5 g/cm" Yet the density of rocks at the surface are typically 2-4 g/cm". What does that tell you about what the density must be closer to the center of the Earth? you about what the density
Answer with explanation:
Since the density of the rocks at the surface of earth equals [tex]2-4gm/cm^{3}[/tex] which is much lesser than the average density of the earth equaling [tex]5.5gm/cm^{3}[/tex] thus we conclude the density of material closer is greater than [tex]5.5gm/cm^{3}[/tex].This can be mathematically shown as under:
[tex]\rho _{earth}=\frac{\rho _{surface}+\rho _{core}}{2}\\\\5.5gm/cm^{3}=\frac{(2-4)gm/cm^{3}+\rho _{core}}{2}\\\\\therefore \rho_{core}=[2\times 5.5-(2-4)]gm/cm^{3}\\\\\therefore \rho_{core}=(7-9)gm/cm^{3}[/tex]
Thus we conclude that the density of the matter closer to the center ranges between [tex]7-9gm/cm^{3}[/tex]
The density closer to the center of the Earth must be higher than the surface due to compression and the composition of concentric shells with increasing density.
Explanation:The average density of the Earth is 5.5 g/cm³, while the density of rocks at the surface is typically 2-4 g/cm³. This tells us that the density must be higher closer to the center of the Earth.
The Earth is not uniform and is composed of concentric shells with different densities. The density increases as we move closer to the center. The inner core of the Earth is the densest part, with a density of nearly 14 g/cm³.
The increase in density closer to the center is due to compression caused by the weight of overlying material.
explain how you could use a graduated cylinder and a gram
balance to determine the density of water in g/ ml, calculate the
density of water.
Explanation:
From the question , we are given a graduated cylinder and a gram balance ,
Graduated Cylinder -
The purpose of a graduated cylinder is to determine the volume of any liquid .
The graduated cylinder have the marks for the amount of liquid filled in it , Hence , the volume of the water can be determined , by filling the water and observing the reading .
To calculate the mass of water , first the empty cylinder is weighed and then water is added and again weighed , now the difference will give the mass of the water ,
Now to calculate the value of density ,
Density of a substance is given by the mass of the substance divided by the volume of the substance .
Hence , d = m / V
V = volume
m = mass ,
d = density ,
Hence , by putting the values for the mass and volume , density is calculated from the above formula .
To determine the density of water using a graduated cylinder and a gram balance, measure the mass of a known volume of water and calculate the density by dividing the mass by the volume.
Explanation:To determine the density of water using a graduated cylinder and a gram balance, you would first measure the mass of a known volume of water using the gram balance. Then, you would measure the volume of the water by pouring it into the graduated cylinder and reading the volume markings. Finally, you would calculate the density of water by dividing the mass by the volume.
For example, if you measured a mass of 100 grams and a volume of 100 milliliters, you would divide 100 grams by 100 milliliters to get a density of 1 gram per milliliter.
What are the major controlling factors for the variations of the water mass in the ocean?
Answer:
Rising and falling of tides, Winds and thermohaline circulation in oceans.
Explanation:
As oceanic mass is always defined as a body of water which has commonly formed with the chemical and physical properties. Like temperature salinity and common water mass in the world are Atlantic bottoms, Deepwater basins. Depth of the oceanic water can be measured through the salinity or dissolved salt content in water, this affects the amount of freshwater in oceans. Deeper zones of water bodies are found near the trenches and valley bottoms. Winds are responsible for raising and falling of tidal waters in oceans and movement of currents produced in water masses affects the direction and flow of water bodies. Winds have a direct impact on the ocean warm water upwelling and other factors being the flow of debris etc.A materials demonstrating low to heat conduction would be categorized under which property catagory?
Electrical
Thermal
Optical
Magnetic
Mechanical
Answer:
Thermal
Explanation:
Any material showing heat conductivity is may be categorized as thermal as all matter like solids, liquids and gases have heat conductivity and conduction is the flow of heat from within the body. Hetal has high heat and thermal conductivity, gases have poor molecular heat conductivity. Thus for a steady state of convection take place the conductivity constant or K has to be kept in mind. The properties of thickness, time and direction are known as conductivity constant. Electrical, magnetic and mechanical properties of matter are also significant factors that can raise the body heat of the substance. So for heat to exchange and energy to create from one body to the other, there has to be a thermal mechanism involved.Answer:
thermal
Explanation:
Which of the following radiations has the shortest wavelength?
Question 36 options:
X-rays
Near Infrared
Visible light
Ultraviolet
Answer:
X-rays
Explanation:
X-rays are a higher frequency than the other three. A higher frequency has a shorter wavelength.
Question 14 Where (in relation to the Sun) are the four least dense planets? a) Farthest from the Sun b) Nearest to the Sun c) Distance from the Sun is not related to density d) Distance and density are in exact agreement
Answer:
d) Distance and density are in exact agreement
Explanation:
Distance From the sun is related to the density of the planets as most of the terrestrial planet have rocky cores and are made up of solid metals so, the density remains stable as the case of the earth having a density of 5.5g/cm cube. Planets near to the sun like the mercury have a density of 5.4g/cm cube and planets away from the sun like Saturn have a density of 1.2g/cm cube and Jupiter has 1.3g/cm cube. Thus it can be estimated that the nearness to the sun impacts the amount of the gases and gravity the planets can absorb. Four least dense planets are Saturn, Uranus, and Neptune, and Jupiter the farther we go density decreases as these planets tend to made entirely on gas and condensed icy crystals. As the solars winds blow away the gases from terrestrial planetsWhat is the drag force, buoyancy force, and gravitation force on a grain in motion?
Answer:
Drag Force - A drag force is a force of friction caused by a body's movement through fluid like water, air etc.
Buoyancy force - Buoyancy or upthrust force is an upward directed force imposed by a fluid opposing an object's weight
Gravitation force - Gravitational force is a force of attraction that draws mass from any object.
Explanation:
Drag Force - A drag force is a force of friction caused by a body's movement through fluid like water, air etc. Drag force functions contrary to direction of the current flow speed
Buoyancy force - Buoyancy or upthrust force is an upward directed force imposed by a fluid opposing an object's weight. Due to weight of the fluid, pressure rises with depth in a section of fluid.
Gravitation force - Gravitational force is a force of attraction that draws mass from any object.
Light travels at 3 x 105 km/s (300,000 km or 186,000 miles). How long will it take to get to earth? (A distance of 1.5 x 108 km)
0.2 s
0.8 s
8 s
8 minutes
Answer:
Option (4)
Explanation:
Here, Speed of light= [tex]3\times10^5[/tex] Km/sec
Distance= [tex]1.5\times10^8[/tex] Km
We know that,
[tex]Speed=\frac{Distance}{Time}[/tex]
[tex]\implies Time=\frac{Distance}{Speed}[/tex]
[tex]Time=\frac{1.5\times10^8}{3\times 10^5}[/tex]
[tex]=0.5 \times10^3[/tex]
=500 sec
=8 minutes 20 sec
Hence, the correct answer is option (4) i.e 8 minutes.
What is the difference in electronegativity between chemical bonds in diamond(C)? Are these bonds ionic or covalent?
Answer:
Diamond have C-C bonds, so we do not expect difference in electronegativity since only are C atoms. In diamond the bonds are covalent as is expected for bonds between atoms with small difference in electronegativity (<1.7).
The majority of the energy processes at the earth’s surface comes from the earth’s internal energy
Answer:
True, majority of the earth energy source comes from the internal motion but rest comes from outside.
Explanation:
Earth gets its energy from the interior of the planet like the core which forms the most essential driving force of the planet it not just only regulate the flow of geomaterial from the bottom to the top but also acts as a geothermal source for various energy process. As we know this is called the Endogenetic force of the planet caused due to the earth rotation without which earth would have been dead long ago. The external forces of Denudation which break down the landscape from above are of Exogenic in nature. The sun's rays that are 100% at the surface of the earth but, come down o only 50% at the ground level as most of it gets deflected by the natural Albedo of the earth with is 35%. This partial absorption, deflection, and then reflection Thus this process is a temporary phase as all this gets reradiated back in a long wave from at night. Thus internal thermodynamics has a huge role to play in the formation of earth energy processes.the majority of the east coast of the United States has this certain soil classification.
Vertisols
Entisols
Alfisols
Spodosols
Ultisols
Answer:
Ultisols
Explanation:
They are commonly known as red clay soils being acidic, these soil sare founding tropics, and subtropics. Lacking in calcium, magnesium, and potassium. they are produced due to weathering and are found 8% worldwide. They may be purplish red, brownish pale yellowish-orange. Having a pH of more than 5. The red and yellow color results from the iron oxides. They consist of 45% mineral and 5% organic matter. To avoid the decay of matter adding manure to the fall is advisable with a significance of 2 to 3 thick layer as they are easily exhausted. Contain more calcium carbonate.Answer:
the answer to this question is E ( Ultisols
Explanation:
Question 13(Multiple Choice Worth 3 points) Which of the following does not accompany volcanic activity in the Pacific Northwest? slab pull subduction ocean ridge mountain building convergent boundary
Ocean ridge does not accompany volcanic activity in the Pacific Northwest.
Explanation:
In this process the denser oceanic plate force the thinner continental plate to sink into the mantle. This region is referred as subduction zone, where it results in intense volcanic eruptions and earthquakes.
The denser Pacific plate sinks because of the chunk pull impact and it likewise prompts the development of mountains. This sort of impact creates profound center seismic tremors.
It isn't related with the maritime edge as the mid-maritime edge shapes in a disparate plate limit. In the Pacific Northwest , the volcanic activity is carried out by the geological process majorly by subduction.
What form of indoor air pollution is the result of naturally occurring radioactive decay?
Answer:
Radon in door source of air pollution.
Explanation:
From all Pollutant and sources found in the interior of the homes like the pet dander and molds, pesticides and asbestos. Radon a chemical element found in homes having an atomic number of 86. It is a radioactive and odorless tasteless natural gas. Through the radon is non-reactive elements, it can be oxidized with compounds of fluoride. It has no stable isotopes characterized bt unstable mass. In the mining industry, it caused due to the exposure from the released air. Radium-226 is used to produce the radon which is found in uranium ores and phosphate rocks. An estimate of about 2.4 billion curies of radon is released every year into the soil. This pollutant can also be found in water bodies and even in construction sites.Motion of light at the constant speed of light tells us:
Different colors of light travel at different constant speeds.
Light moves instantly from all objects to Earth.
We see distant objects as they were long ago.
Light causes many optical illusions
Answer:
Different colors of light travel at different constant speeds.
Explanation:
The white light is composed of of different colors , i.e. , VIBGYOR , Violet , indigo , blue , green , yellow , orange , red .
When the white light is dispersed into different colors of VIBGYOR , all color bend by different velocities , and speed of the light is independent of time .
Hence , from the given options , the correct answer for eh motion of light , is , the Different colors of light travel at different constant speeds .
Question 2(Multiple Choice Worth 3 points) Which of the following is most dense? asthenosphere continental crust core O mantle oceanic crust
Answer:
Mantle oceanic crust
Explanation:
The Asthenosphere consists of heavier elements like aluminum, magnesium basaltic rocks and made up of old oceanic plates. This liquid layer is based on deformation properties. Which are later characterized by Isostatic adjustment? Due to high temperature and pressure conditions in this layer the rock is in the molten state. Plates above move in n ductile manner as the oceanic crust has a density of 3.0 g/cm cube, and that of continental crust is about 2.83 g/cm cube. Thus lighter plates or continents can move on this layer as they are less dense and hence they, later on, move back into the same oceanic trenches through the process of subduction.What causes the seasons? Explain. Be as precise and accurate as possible.
Answer:
Rotation of the earth on its axis.
Explanation:
The earth is tilted at 23.5 degrees relative to its ecliptic plane and rotates in an anticlockwise direction around the sun this causes the winds in the earth to move from left to right in the northern hemisphere and in right to left in southern hemisphere knowns the Coriolis effect. The impact of sun rays creates a system n the earth's landscape that makes the earth produce temperature inversions and relative earth has three pressure cells that move in a cyclic order from the equator to the poles. It is also due to the angle of inclination around the sun that the earth experience cold and warm weather in summers as a result of the tilt the sun rays fall directly 90 degrees on the equator and are inclined toward the poles at the angle of 30 degrees. Also, the presence of upper air jet streams and geostrophic winds influence the temperature ranges o the earth they bing in the warm and cold air masses from the other regions and equator being a region of mixing diverts all of these winds hence creating a good balance.7. What is the angle between the ecliptic and celestial equator? Why is that important?
Answer:
The ecliptic plane is inclined at 23.5° with respect to the celestial equator because of the tilt of the Earth's rotation axis with respect to the plane of its orbit around the sun.
The angle between the ecliptic and celestial equator is known as the obliquity of the ecliptic.
Why is the angle between the ecliptic and celestial equator important?The angle between the ecliptic and celestial equator, known as the obliquity of the ecliptic which is approximately 23.5 degrees. This angle plays a crucial role in determining the changing seasons on Earth.
The Earth's axis is tilted relative to its orbital plane around the Sun causing the Sun's position in the sky to vary throughout the year. This tilt is responsible for the different lengths of daylight and varying intensity of sunlight that lead to the four distinct seasons.
Read more about Angle
brainly.com/question/25770607
#SPJ2