when water is in the gas state it is known as ________

The most acidic solution is represented by a hydrogen ion concentration of 10^-1 M, which is higher than 1 x 10^-7 M, indicating higher acidity.

The one that describes the most acidic solution among the given hydrogen ion concentrations is 10^-1 M. The acidity of a solution is determined by the concentration of hydrogen ions ([H+]), also referred to as hydronium ions ([H3O+]). A higher concentration of these ions means the solution is more acidic. According to the provided reference material, a solution is acidic if [H3O+] > 1 × 10^-7 M, neutral if [H3O+] = 1 × 10^-7 M, and basic if [H3O+] < 1 × 10^-7 M. Therefore, a concentration of 10^-1 M is significantly greater than 1 × 10^-7 M, indicating a very acidic solution.

The most acidic solution among the given options is 10-1 M.

To determine acidity, we compare the [H+] values. A solution is considered acidic if its [H+] concentration is greater than 1 × 10-7 M. In this case, 10-1 M is much greater than 1 × 10-7 M, making it the most acidic solution.

Answer:

Glucose

Explanation:

i took flvs 8th grade

If a standard die is rolled twice, the probability of getting a perfect square is 1/9 and a number that is less than 5 is 1/16.

Probability is a branch of mathematics which tells about the chances of occurring in something.

There are three squares in a standard dice. 1, 2, 4. If there are two dices, then the probability of getting squares are 1/3 x 1/3 = 1/9.

There are four numbers less than 5, so

1/4 x 1/4 = 1/16.

Thus, the probabilities are 1/9 and 1/16.

Learn more about probability

https://brainly.com/question/11234923

#SPJ2

Final answer:

Sound waves are unique compared to ocean and light waves due to their compressions and rarefactions, as these are properties of longitudinal waves. Both ocean and sound waves have amplitude, wavelength, frequency, and speed, but sound waves compress and expand the medium they travel through.

Explanation:

Sound waves differ from ocean and light waves in specific ways, particularly in terms of compressions and rarefactions. Unlike ocean waves which are transverse waves characterized by crests (the highest points) and troughs (the lowest points), sound waves are longitudinal waves, which means their displacement is parallel to the direction of wave propagation. The compressions are regions where the medium through which the sound is traveling is compressed, while rarefactions are regions where the medium is less dense or stretched apart.

Common features like wavelength, amplitude, frequency, and speed are shared among sound, ocean, and light waves. Wavelength is the distance between two contiguous compressions or rarefactions in a sound wave. Amplitude is the maximum displacement of points on a wave, which corresponds to the volume in sound waves. Frequency is the number of waves passing a point per unit time, and speed is how fast the wave travels through a medium.

The 103.8g nitric acid solution that is 70.0% HNO3 contains approximately 72.66g of HNO3.

The student is asking about the mass of HNO3 (nitric acid) in a given solution. Given that the solution is 70.0% HNO3, this means that 70.0% of the total mass of the solution is due to HNO3. To calculate the actual mass of HNO3 in the solution, we need to multiply the total mass of the solution (103.8g) by the percentage of HNO3 (70.0%).

Mathematically, this is (103.8g) x (70.0/100), resulting in a mass of approximately 72.66g HNO3. Therefore, this 103.8g sample of nitric acid solution contains approximately 72.66g of HNO3.

https://brainly.com/question/32200635

#SPJ11

The strongest bases are hydroxide will be group 1 and and group 2 metals.

A base that totally dissociates in such an aqueous solution is referred to as a strong base.

The elements which have one valence electrons placed in group 1 in the periodic table.

The hydroxides were basic by nature, and so as they move down the group, basic strength rises. This is caused by the weaker M-O bond in MOH, which can break to produce OH- ions in solution, as well as the low ionization energies of certain metals. The basic intensity of the hydroxides grows as the ionization energy drops down the group.

The strongest bases are hydroxide will be group 1 and and group 2 metals.

Therefore, the correct answer will be option (B).

To know more about strongest base.

https://brainly.com/question/24003853

#SPJ2

The strongest bases are the hydroxides of group 1 and group 2 metals, like NaOH and Ba(OH)2, as they fully dissociate in water. Hence, the correct option is B.

The strongest bases are known to be the hydroxides of group 1 and group 2 metals in the periodic table. Hydroxides of alkali metals (group 1) such as lithium hydroxide (LiOH), sodium hydroxide (NaOH), potassium hydroxide (KOH), rubidium hydroxide (RbOH), and cesium hydroxide (CsOH) are strong bases because they completely dissociate into their respective cations and hydroxide ions (OH-) when dissolved in water. Additionally, hydroxides of heavier alkaline earth metals (group 2), like calcium hydroxide (Ca(OH)2), strontium hydroxide (Sr(OH)2), and barium hydroxide (Ba(OH)2), are also considered strong bases due to their full ionization in aqueous solutions. These substances are classified as strong electrolytes because of their ability to completely dissociate and contribute to electrical conductivity in solutions.

its an electrolyte.. :D

Final answer:

To calculate the pH of a 0.150M solution of HNO3, use the formula pH = -log([H+]), which gives a pH of approximately 0.823 since HNO3 is a strong acid and fully dissociates.

Explanation:

To calculate the pH of a 100.0 mL of a 0.150M aqueous solution of HNO3, we need to understand that  is a strong acid and fully dissociates in water. This means that the concentration of hydrogen ions, [H+], in the solution will be equal to the concentration of the nitric acid, which is 0.150M. The pH is calculated using the formula pH = -log([H+]) where [H+] is the concentration of hydrogen ions.

Plugging the values into the formula, we get pH = -log(0.150). The pH calculation would result in a pH of approximately 0.823.

Redox reactions are due to competition between particles for electrons. These reactions involve the back-and-forth transfer of electrons, with accompanying energy shifts. Major contributors to the process are co-enzymes like NAD and FAD.

Oxidation-reduction reactions, also known as redox reactions, occur because of competition between particles for electrons. This process involves the transfer of electrons from one compound (the donor) to another compound (the recipient). When an electron is passed from a donor molecule, it undergoes oxidation. The recipient molecule, on the other hand, goes through a process called reduction, meaning it gains an electron.

Utilization of the transferred electrons involves the release and absorption of energy. Commonly, these reactions occur in a series, meaning a molecule that is reduced (gains an electron) is subsequently oxidized (loses the electron), passing on both the electron and the absorbed energy to the next molecule. Over time, this results in an accumulation of energy that is further used for various metabolic functions.

Some major contributors to this process are coenzymes like nicotinamide adenine dinucleotide (NAD) and flavin adenine dinucleotide (FAD). These coenzymes accept and transfer high-energy electrons between compounds in pathways, thereby playing a crucial role in redox reactions.

https://brainly.com/question/13978139

#SPJ3

Answer:

Explanation:

Final answer:

Work and energy are measured in joules, which is the SI unit representing the amount of work done by a force of one newton over one meter, with 1 joule being equivalent to 1 newton-meter (N·m).

Explanation:

Work and energy are both measured in the same unit, which is the joule (J). In the International System of Units (SI), a joule is defined as the amount of work done when a force of one newton is applied over a distance of one meter. Therefore, 1 joule is equal to 1 newton-meter (N·m), which is also the equivalent of 1 kilogram-meter squared per second squared (kg·m²/s²). For example, one joule is the amount of energy required to lift a small 100-gram apple approximately 1 meter against the force of gravity.

Energy can be defined as the capacity to do work. Since work is calculated as force times distance, the SI unit for energy and work reinforces the relationship between these concepts, making joules a common unit to express both. The work-energy theorem explains how work is transformed into kinetic energy and further reinforces the use of joules as a unit of measurement for these terms.

The correct option is b i.e, Carbon significantly affects the weldability of common gray cast iron due to its high content and impact on microstructure, leading to potential brittleness and cracking during welding.

The element that has the most important effect on the weldability of common gray cast iron is notably carbon. Gray cast iron contains a high percentage of carbon, typically between 2.5% and 4.0%, which forms large graphite flakes within an iron matrix. These graphite flakes give gray cast iron its characteristic properties, such as good machinability and vibration damping, but they also create challenges during welding because they can lead to brittleness and cracking in the heat-affected zone.

Carbon's presence in high concentrations impacts the microstructure of the iron, making the weldability more complex compared to other elements like copper, steel, or sulfur. This is primarily because excessive carbon can lead to the formation of hard and brittle phases during cooling, which complicates the welding process.

Answer:

2; Single Displacement

Explanation:

Answer:

All ancient fossils contain C-14

Explanation:

All living things contain more than one isotope of carbon, the most prominent being, carbon -12 and carbon-14.

Carbon-14 is a radioactive isotope of carbon. When the artifact is retrieved, the activity of carbon-14 in that sample is matched with the carbon-14 activity of a living organism. When this is done, the age of the fossil can easily be accurately calculated.

An acyclic alkane with 12 carbon atoms will contain 26 hydrogen atoms, as determined by the formula for noncyclic alkanes, CnH2n+2. Alkanes consist of carbon and hydrogen atoms, and the number of carbon atoms in an alkane can vary widely.

The number of hydrogen atoms in an acyclic alkane with 12 carbon atoms can be found using the general formula for noncyclic alkanes, which is CnH2n+2. Here, 'n' represents the number of carbon atoms. Thus, if an acyclic alkane has 12 carbon atoms, you can substitute 12 into the formula to get: C12H2(12)+2 = C12H26. This means that an acyclic alkane with 12 carbon atoms will contain 26 hydrogen atoms.

All alkanes are composed of carbon and hydrogen atoms, and have similar bonds, structures, and formulas; noncyclic alkanes follow the formula of CnH2n+2. The number of carbon atoms present in an alkane has no limit. Greater numbers of atoms in the molecules lead to stronger intermolecular attractions (dispersion forces) and correspondingly different physical properties of the molecules.

https://brainly.com/question/33311012

#SPJ3

The enthalpy of a reaction does not depend on intermediate reactions but on the initial and final states, determining the overall enthalpy change as per Hess's law. Option B is correct.

The correct description of the enthalpy of a reaction is that it does not depend on the intermediate reactions. Enthalpy is a state function, which means it only depends on the initial and final states of the system, not on the path or intermediate reactions taken to get from one to the other.

This is analogous to climbing a mountain; the total altitude change is the same regardless of the path taken to reach the summit. Therefore, the enthalpy change of a chemical reaction can be determined using Hess's law, which states that the total enthalpy change during a reaction is the sum of the enthalpy changes for each step of the reaction process.

Hence, B. is the correct option.

The answer is D

hope this isnt too late

The movement of tectonic plates buries a rock deep inside Earth. Intense heat and pressure change the mineral composition of the rock and transform it into rock as rock A is composed of layers of sediments. Rock B has a fine grainy texture and small crystals.

Minerals are defined as a chemical compound which has a well -defined composition and possesses a specific crystal structure.It occurs naturally in the pure form.

If a compound occurs naturally in different crystal structure then each structure is considered as a different mineral.The chemical composition of a mineral varies depending on the presence of small impurities which are present in small quantities.

Some minerals can have variable proportions of two or more chemical elements which occupy equivalent position in the crystal structure.It may also have variable composition which is split into separate species.

Physical properties of minerals include color,streak, luster,specific gravity and cleavage.

Learn more about minerals,here:

https://brainly.com/question/18078524

#SPJ3

Answer:

Explanation:

Subatomic particles are the structures of matter that are smaller than the atom, and that are part of it and determine its properties. These particles can be of two types: compound and elementary, that is, divisible (composed of other subatomic particles) and indivisible respectively.

The atom is made up of three stable particles: electron, proton and neutron and these particles are in turn composed of others, still smaller. So, currently the existence of the following subatomic particles is known, in addition to the three previously mentioned:

Due to their low stability and size, these particles are very difficult to study and discover.

To find the number of neutrons in Roentgenium-272 (Rg-272), subtract its atomic number (111) from its mass number (272), resulting in 161 neutrons.

The student is asking to determine the number of neutrons in an atom of Roentgenium-272 (Rg-272). To calculate the number of neutrons in an atom of Rg-272, we use the mass number of the isotope and the atomic number of the element.

Roentgenium (Rg) has an atomic number of 111, which is the number of protons in the nucleus of the atom. The mass number of Rg-272 is the sum of protons and neutrons together. Since we know the atomic number of Rg is 111, the calculation to find the number of neutrons is:

Number of neutrons = Mass number - Atomic number
Number of neutrons = 272 - 111
Number of neutrons = 161

Therefore, an atom of Rg-272 has 161 neutrons.

Answer:

36.385 grams of oxygen reacts when 84.9 grams of iron.

Explanation:

[tex]4Fe+3O_2\rightarrow 2Fe_2O_3[/tex]

Moles of iron = [tex]\frac{84.9 g}{56 g/mol}=1.5160 mol[/tex]

According to reaction, 4 moles of iron reacts with 3 moles of oxygen gas.

Then 1.5160 moles of iron will react with:

[tex]\frac{3}{4}\times 1.5160 mol=1.1370 mol[/tex] of oxygen gas

Mass of 1.1370 moles of oxygen gas:

[tex]1.1370 mol\times 32 g/mol=36.385 g[/tex]

36.385 grams of oxygen reacts when 84.9 grams of iron.