When writing 6,020,000 in scientific notation, it is correctly written as: 6.02 x 106 6.02 x 10-6 602. x 106 0.602 x 10-8

Answer:

2CO2 or A

Explanation: i just got its right!

The atomic number of an atom is the number of its electrons which is equal to the number of its protons. Mass number is the sum of number of protons and neutrons. Hence, substracting atomic number from mass number give us the number of neutrons.

An atom is made of subatomic particles, electrons, protons and neutrons. The protons and neutrons are located inside the nucleus and the electrons revolving around the nucleus through fixed energy levels.

In a neutral atom, the number of electrons is equal to the number of protons. This number is called the atomic number of the atom. The sum of number of neutrons and number of protons is called mass number of the atoms.

Substracting atomic number from mass number is the subtraction of number of protons from the mass number. Hence, it gives the number of neutrons. Thus, option B is correct.

Find more on mass number:

https://brainly.com/question/4408975

#SPJ6

In a 1.0× 10–2 M solution of NH4ClO4(aq), the relative molar amounts of NH4+, ClO4-, and NH4ClO4 are 1:1:1.

In a 1.0× 10–2 M solution of NH4ClO4(aq), the relative molar amounts of the species can be determined by looking at the balanced chemical equation for NH4ClO4 dissolving in water.

The balanced equation is NH4ClO4(aq) → NH4+(aq) + ClO4-(aq).

From the equation, we can see that for every 1 mole of NH4ClO4, 1 mole of NH4+ and 1 mole of ClO4- are produced.

https://brainly.com/question/9255875

#SPJ3

Answer: B. Temperature

Explanation:

The temperature of the star such as Sun is measured. Using this measurement, its peak wavelength and energy can be determined.

For determination of wavelength, Wien's displacement law is used. This law states that, the sun like body emits all kinds of wavelengths and thus is nearly a black body.

For black body, the peak wavelength emitted is inversely proportional to the temperature of the body. From the wavelength, energy can be calculated.

Temperature is the property which is primarily responsible for determining the type of electromagnetic energy and peak wavelength emitted by star.

Answer: Option (a) is the correct answer.

Explanation:

It is known that value of electronegativity increases when we move from left to right in a periodic table.

Since the given atoms lithium, beryllium, boron, carbon and nitrogen are all second period elements. And the value of their electronegativity are as follows.

Lithium : 0.98

Beryllium : 1.57

Boron : 2.04

Carbon : 2.55

Nitrogen : 3.04

Thus, we can conclude that lithium has the least electronegativity.

Answer:

Option 4.

Explanation:

Solubility may be defined as the ability of a solute to dissolve in a solvent. The maximum ability of solute to dissolve in a solvent can be measured by its solubility.

For example: alcohol ( solute) can dissolve in a solvent( water). Alcohol has high solubility for water and can easily dissolve in water.

Hence, the correct answer is option 4.

When a substance has high solubility, it readily dissolves in a solvent, resulting in a concentrated solution. The correct statement is Solubility is the ability of one substance to dissolve in another.

Solubility refers to the maximum amount of a solute that can dissolve in a given amount of solvent at a specific temperature and pressure. It is a measure of how well a substance can dissolve in another substance to form a homogeneous mixture called a solution.

Solubility is typically expressed in terms of the amount of solute that can dissolve in a given amount of solvent, often measured in grams per liter (g/L) or moles per liter (mol/L). It is influenced by factors such as temperature, pressure, the nature of the solute and solvent, and the presence of other substances.

Therefore, the correct statement is: Solubility is the ability of one substance to dissolve in another.

For more details regarding solubility, visit:

https://brainly.com/question/31493083

#SPJ6

The important steps in the process of creating a theory are the following: hypothesizing, observing, and testing.  You first conduct observation to identify problem or situation that will lead to your theory. Next step is to formulate an intelligent guess called as the hypothesis. This hypothesis will be tested if it fit to be a theory.

Answer:

The spring tides occur seven days after the spring tide and the spring tides occur twice in the lunar year.

Explanation:

A spring tide is a tide in which there is a greatest difference between a high and low tide is the greatest. A spring tide occurs when the earth, the moon, and the sun are in the straight line. A neap tide, on the other hand, occurs when the sun, moon, and earth make a three triangle kind of a triangle. It occurs when there is a least between the highest and lowest tide.

Neap tides occur twice a month when the sun and moon are at right angles to the earth.  Spring tide, on the other hand, occur at new moon or full moon

Answer:

Conductivity

Ductility

malleability

Explanation:

There are many properties of metals which can be explained by pool-of-shared electrons or electron sea model.

a) As electrons are considered to be free like in a sea so they are able to conduct electricity easily. Thus metals are conducting in nature.

b) The bonds are random in between metal atoms and can be broken easily and can be formed easily hence as per model the metal are highly ductile and malleable in nature.

Answer:

The correct answer is "strong intermolecular forces".

Explanation:

During the evaporation phase, external energy is applied to a substance that results in the separation of their molecules. The evaporation rate is closely related to the intermolecular forces within the substance. A liquid that evaporates at a slow rate exhibits strong intermolecular forces. This happens because the energy applied to the liquid would need more time to separate the molecules of a substance that are strongly attached.

Answer is C for plato users

7.3 × 10-2

Answer: The molarity of HCl is 0.036 M and moles of HCl is 5.76 moles.

Explanation:

[tex]n_1M_1V_1=n_2M_2V_2[/tex]

where,

[tex]n_1,M_1\text{ and }V_1[/tex] is the n-factor, molarity and volume of calcium hydroxide.

[tex]n_2,M_2\text{ and }V_2[/tex] is the n-factor, molarity and volume of hydrochloric acid.

We are given:

[tex]n_1=2\\M_1=0.120M\\V_1=24mL\\n_2=1\\M_2=?M\\V_2=160mL[/tex]

Putting values in above equation, we get:

[tex]2\times 0.120\times 24=1\times M_2\times 160\\M_2=0.036M[/tex]

[tex]\text{Molarity}=\frac{\text{Number of moles}}{\text{Volume}}[/tex]

Molarity of HCl = 0.036 mol/mL

Volume of HCl = 160 mL

Putting values in above equation, we get:

[tex]0.036=\frac{\text{Number of moles}}{160}\\\\\text{Number of moles of HCl}=5.76mol[/tex]

Hence, the molarity of HCl is 0.036 M and moles of HCl is 5.76 moles.

The pressure of the gas above the water when the solubility of the gas is 1.0 g/L is 0.75 atm

This states that the solubility of a gas in liquids at constant temperature is proportional to its pressure. Mathematically, it can be expressed as

S₁ / P₁ = S₂ / P₂

Where

From the question given above, the following data were obtained

S₁ / P₁ = S₂ / P₂

4 / 3 = 1 / P₂

Cross multiply

4 × P₂ = 1 × 3

4 × P₂ = 3

Divide both side by 4

P₂ = 3 / 4

P₂ = 0.75 atm

Learn more about solubility:

https://brainly.com/question/4530083

#SPJ2

Alkali metals have a general outermost electronic configuration of [tex] ns^{1} [/tex]

Alkali earth metals have a general outermost electronic configuration of [tex] ns^{2} [/tex]

The +1 ion of the alkali metals has a stable octet configuration of the nearest noble gas as the outermost ns electron is lost.

The +2 ion of the alkaline earth metals has a stable configuration of the nearest noble gas as the two electrons in the outermost ns shell are lost.

Answer:

C is your answer

Explanation:

             K and I

                      Salt is a neutral compound made up of a positive cation and a negative anion joint together via an ionic bond. Also, ionic bond is formed between metals and non metals. Furthermore, if the electronegativity difference between the metal and non metal is greater than 1.7 then it will go for ionic bonding. Let us calculate the electronegativity difference between the given pair of elements and predict the ionic bond between them.

1) F and O;

               E.N of Fluorine     =  4.00

               E.N of Oxygen      =  3.50

                                              ------------

              Difference                 0.50                 (Not Ionic, No Salt Formation)

As both are non metals hence, the formation of ionic bond is not favored.

2) F and I;

               E.N of Fluorine        =  4.00

               E.N of Iodine           =  2.70

                                                ------------

              Difference                     1.30               (Not Ionic, No Salt Formation)

Again, both elements are non metals with less electronegativity difference, therefore no salt formation takes place.

3) Na and Al;

               E.N of Aluminium     =  1.60

               E.N of Sodium          =  0.90

                                                  ------------

              Difference                      0.70           (Not Ionic, No Salt Formation)

Both are metals, hence ionic bond is not formed therefore, fails to form salt.

4) K and I;

               E.N of Iodine                =  2.70

               E.N of Potassium         =  0.80

                                                      ------------

              Difference                          1.90       (Ionic, Salt Formation favored)

Potassium is a metal and Iodine is non metal also, electronegativity difference is greater than 1.7 hence, electron transfer takes place and results in the formation of ions and salt.

Answer:8.59L

Explanation:

The other answer has all the right steps but the atomic mass of potassium is actually 39.098 not 19.

Final answer:

Approximately 8.58 liters of nitrogen gas are needed to react with 90.0 g of potassium to produce potassium nitride at STP, after calculating moles of potassium and its stoichiometric conversion to moles and then volume of nitrogen gas.

Explanation:

To determine how many liters of nitrogen gas are needed to react with 90.0 g of potassium to produce potassium nitride, we first need to understand the correct chemical reaction for forming potassium nitride from potassium and nitrogen gas. The reaction is as follows:

6 K(s) + N₂(g) → 2 K₃N(s)

Firstly, calculate the moles of potassium. The molar mass of potassium (K) is approximately 39.10 g/mol. Therefore, the moles of potassium in 90.0 g are calculated as:

90.0 g K × (1 mol K / 39.10 g K) = 2.30 mol K

From the balanced equation, it is clear that 6 moles of potassium react with 1 mole of nitrogen gas. Hence, the moles of nitrogen gas needed can be calculated as:

2.30 mol K × (1 mol N₂ / 6 mol K) = 0.383 mol N₂

At Standard Temperature and Pressure (STP), 1 mole of any gas occupies 22.4 liters. Therefore, the volume of nitrogen gas required at STP can be found as:

0.383 mol N₂ × 22.4 L/mol = 8.58 L N₂

Therefore, approximately 8.58 liters of nitrogen gas are needed to react with 90.0 g of potassium to produce potassium nitride at STP.

The functional group found in an ester is a carbonyl group with an attached second oxygen atom that is bonded to a carbonyl carbon substituent by a single bond, usually a pair of alkyl or aromatic groups. In addition, it can be shown in text as RCOOR or occasionally as ROCOR, which made them responsible in the distinctive and attractive odors and flavors of many flowers, perfumes, and ripe fruits.  

Final answer:

In a hydrogenation reaction, a catalyst helps transform an alkene into an alkane by lowering the activation energy and facilitating the addition of hydrogen atoms to the double bond of the alkene.

Explanation:

In a hydrogenation reaction, a catalyst is used to transform an alkene to an alkane. Catalysts speed up chemical reactions by lowering the activation energy without being consumed in the process. Common catalysts used in hydrogenation include finely divided metals such as platinum, palladium, and nickel. The process involves the alkene being adsorbed on the surface of the catalyst, followed by the addition of hydrogen atoms to the carbons of the double bond, resulting in a saturated hydrocarbon or alkane.