When you burn a log in your fireplace you are converting ________?

Answers

Answer 1
When you burn a log in your fireplace you are converting cellulose into carbon dioxide and water.

Wood is made from cellulose. When wood burns, cellulose reacts with oxygen from the air and it forms carbon dioxide and water vapor. 

The reaction of the combustion of glucose is as follows:

C₆H₁₂O₆ + 6O₂ = 6 CO₂ + 6H₂O
When wood burns, we notice that it slowly disappears because it passes into the mentioned gases. The ash that is created is part of the wood that did not burn.
Answer 2

Burning a log in a fireplace converts the chemical energy stored in the wood into thermal energy and light, through a process called combustion. Wood stoves and fireplace inserts can offer more efficient and less polluting heating options by releasing fewer particulates.

When you burn a log in your fireplace, you are converting the chemical energy stored in the wood into thermal energy and light. This process is known as combustion, and during combustion, the carbon in wood combines with oxygen in the air to form carbon dioxide. Along with carbon dioxide, water vapor, and other gases, a significant amount of thermal energy is released, which provides heat to your home.

The burning of wood for home heating is a form of energy transformation where the potential energy stored within the wood's molecular bonds is released. Modern wood stoves and fireplace inserts are designed to burn wood efficiently and release fewer particulates, resulting in a more efficient and less polluting way of heating. However, with traditional fireplaces, much of the heat is lost through the chimney, making them less efficient as a heating source.

Furthermore, as the wood burns and breaks down, it leaves behind hot embers that radiate heat. The glow of these embers is an example of blackbody radiation, where the emitted light and heat are directly related to their temperature. This radiant energy contributes to the warming effect of a fire.


Related Questions

A rigid vessel at constant temperature initially contains 0.600 atm nitrogen gas and 0.600 atm hydrogen gas. if these gases react to form ammonia and the reaction goes to completion, which choice is closest to the final total pressure after the reaction?

Answers

The balanced reaction between nitrogen and hydrogen to form ammoinia is as shown.
 N2 + 3H2=2NH3 
Dividing everything by 3
1/3N2 +  H2 = 2/3NH3
All the hydrogen reacts with 1/3 of 0.5 atm of N2
The amount of product is 2/3 × 0.6 atm = 0.4 atm NH3
The unreacted nitrogen is 2/3 × 0.6 atm =0.4 atm Nitrogen
That adds up to 0.8 atm

The final total pressure after the completion of reaction is [tex]\boxed{0.8{\text{ atm}}}[/tex].

Further Explanation:

Stoichiometry:

The amountof species present in the reaction is determined with the help of stoichiometry by the relationship between reactants and products.

Balanced chemical reaction between nitrogen and hydrogen is as follows:

[tex]{{\text{N}}_{\text{2}}} + 3{{\text{H}}_2} \to 2{\text{N}}{{\text{H}}_{\text{3}}}[/tex]  

This balanced reaction’s stoichiometry clearly indicates that one mole of nitrogen reacts with three moles of hydrogen to produce two moles of ammonia.

Since pressure is directly related to number of moles of gas, pressure required by hydrogen to react with one mole of nitrogen should be three times of pressure of nitrogen.

Therefore pressure of hydrogen can be calculated as follows:

[tex]\begin{aligned}{\text{Pressure of hydrogen}} &= 3\left( {0.600{\text{ atm}}} \right) \\&= 1.8{\text{ atm}} \\\end{aligned}[/tex]  

But pressure of hydrogen in the rigid vessel is 0.600 atm only so it behaves as limiting reactant and its amount will govern the amount or quantity of product formed (ammonia).

Since the ratio of pressures of hydrogen and ammonia is 3:2, pressure of ammonia can be calculated as follows:

[tex]\begin{aligned}{\text{Pressure of ammonia}} &= \left( {\frac{2}{3}} \right)\left( {0.600{\text{ atm}}} \right) \\&= 0.4{\text{ atm}} \\\end{aligned}[/tex]  

Pressure of unreacted nitrogen can be calculated as follows:

[tex]\begin{aligned}{\text{Pressure of unreacted nitrogen}} &= \left( {\frac{2}{3}} \right)\left( {0.600{\text{ atm}}} \right) \\&= 0.4{\text{ atm}} \\\end{aligned}[/tex]  

Therefore total final pressure after the reaction can be calculated as follows:

[tex]\begin{aligned}{\text{Total final pressure}} &= \left( {0.4 + 0.4} \right){\text{ atm}} \\&= {\text{0}}{\text{.8 atm}} \\\end{aligned}[/tex]  

Learn more:

Calculate the moles of chlorine in 8 moles of carbon tetrachloride: https://brainly.com/question/3064603 Calculate the moles of ions in the solution: https://brainly.com/question/5950133

Answer details:

Grade: Senior School

Subject: Chemistry

Chapter: Mole concept

Keywords: stoichiometry, NH3, H2, N2, pressure, hydrogen, nitrogen, ammonia, 0.4 atm, 1.8 atm, 0.600 atm, 3H2, 2NH3, 0.8 atm.

Hydrazine (n2h4) is used as rocket fuels. it reacts with oxygen to form nitrogen and water. write the balanced equation for this reaction. n2h4 + o2 → n2 +2h2o how many liters of n2 at stp form when 100g of n2h4 reaction with 100g of o2? how many grams of the excess reagent remain after the reaction?

Answers

The answer is: volume of nitrogen is 70L.

Chemical reaction: N₂H₄ + O₂ → N₂ + 2H₂O.

m(N₂H₄) = 100 g; mass of hydrazine.

M(N₂H₄) = 32 g/mol; molar mass of hydrazine.

n(N₂H₄) = m(N₂H₄) ÷ M(N₂H₄).

n(N₂H₄) = 100 g ÷ 32 g/mol.

n(N₂H₄) = 3.125 mol; amount of hydrazine.

m(O₂) = 100 g; mass of oxygen.

M(O₂) = 32 g/mol; molar mass of oxygen.

n(O₂) = 100 g ÷ 32 g/mol.

n(O₂) = 3.125 mol; amount of oxygen.

From chemical reaction: n(O₂) : n(N₂) = 1 : 1; n(O₂) = n(N₂).

n(N₂) = 3.125 mol; amount og nitrogen gas.

V(N₂) = n(N₂) · Vm.

Vm = 22.4 L/mol; molar volume.

V(N₂) = 3.125 mol · 22.4 L/mol.

V(N₂) = 70 L.

There is not excess reagent, because hydrazine and oxygen are all used in chemical reaction.

The solar system formed from the

A. grouping together of asteroids.
B. explosion of an interstellar sun.
C. collision of two massive stars.
D. collapse of an interstellar cloud.

Answers

Answer:
D. collapse of an interstellar cloud.

Explanation:
The formation of the solar system was explained based on the  Nebular Hypothesis. This hypothesis states that the explosion of the supernova resulted in the disturbance of a cloud of gas and dust in space which led to the formation of the solar system.

Hope this helps :)

What is my theoretical yield (in moles) of Potassium Bromide (KBr) if I start with 40 grams of Iron (II) Bromide [FeBr2]? moles KBr

Answers

The reaction will be: FeBr2 + K --> KBr + Fe
Balancing gives: FeBr2 + 2K --> 2KBr + Fe
The molar mass of FeBr2 is 55.85 + 2*79.9 = 215.65 g/mol.
We divide 40 g / 215.65 g/mol = 0.185 mol FeBr2
Based on stoichiometry:
(0.185 mol FeBr2)(2 mol KBr/1 mol FeBr2) = 0.370 mol KBr

Which of these agreements has goals of peace and shared scientific research?

A. Environmental Protection Treaty
B. Migratory Bird and Game Mammal Treaty
C. Antarctic Treaty System
D. Ramsar Convention

Answers

Option C, Antarctic Treaty System, is the right answer.

The Antarctic Treaty System, control global connections with regard to Antarctica; the only continent of the earth without the native population of human beings. In other words, the ATS is the entire system of adjustments developed for the intention of managing associations among states in the Antarctic. The main goal of the ATS is to guarantee "in the affair of all humankind that Antarctica shall proceed always to be practised completely for peaceful objectives and shall not become the view or gadget of universal disharmony.

Answer:

The correct answer is "Antarctic Treaty System"

Explanation:

The Antarctic treaty system signed the first arms control agreement. It bans any form of military agreement on the Antarctic, and promotes free scientific investigation. The treaty was signed by 12 countries during the era of the cold war. The only use of military is for peaceful purposes and scientific investigations. It promotes free exchange of scientific knowledge and personnel.

A carbon compound X turns blue litmus to red and has a molecular formula C2H4O2.Identify X and draw its structure.Write a chemical equation for the reaction and name of the product formed in each case when X reacts with
a. ethanol in the presence of conc.H2SO4 (
b. sodium carbonate

Answers

X is acetic acid or CH3COOH Acetic acid belongs to the homologous series; alkanoic acids; which are group of weak acids. They react with alkanols or alcohols to form esters or what we call alkyl alkanoates in presence of concentrated sulfuric acid. Additionally, they react with carbonates to yield a salt, water and carbon dioxide gas.
(a) Acetic acid reacts with ethanol to form ester in presence of concentrated sulphuric acid (H2SO4) CH3COOH + C2H5OH ----------------------> CH3COOC2H5 + H2O Product formed is Ethyl ethanoate or ethyl acetate.

(b) The reaction will be; Na2CO3 + 2CH3COOH ---------> 2CH3COONa + H2O + CO2 Effervescence will be observed due to the production of Carbon dioxide gas.

Answer: Substance X is ethanoic acid and the reactions are given below.

Explanation:

A compound having molecular formula of [tex]C_2H_4O_2[/tex] which turns blue litmus to red is considered as an acid.

The compound is ethanoic acid which is generally termed as acetic acid.

Thus, the compound X is acetic acid.

The chemical equations for the reaction of X with

a. Ethanol in the presence of [tex]H_2SO_4[/tex]

When acetic acid reacts with etahnol in the presence of an acid, it leads to the formation of a fruity smelling compound known as ester which is ethyl acetate.

[tex]CH_3COOH+CH_3CH_2OH\xrightarrow[]{H_2SO_4}CH_3COO-CH_2CH_3+H_2O[/tex]

b. Sodium carbonate

When acetic acid reacts with sodium carbonate, it leads to the formation of sodium acetate, carbon dioxide and water.

[tex]2CH_3COOH+Na_2CO_3\rightarrow 2CH_3COONa+CO_2+H_2O[/tex]

Which of these items best describes the arrangement of electrons in an atom of sulfur? A. Two electrons in its first energy level; eight electrons in its second energy level; six valence electrons in its outermost energy level B. Two electrons in its first energy level; two electrons in its second energy level; eight electrons in its third energy level; four valence electrons in its outermost energy level C. Two valence electrons in its first energy level; eight electrons in its second energy level; six electrons in its outermost energy level D. Eight electrons in its first energy level; eight valence electrons in its outermost shell

Answers

B is the answer to this question...

THE ANSWER TO THIS QUESTION IS B  IF YOU USING PF

What is the molar mass of the empirical formula for a compound with the formula C6H12Cl2O2

Answers

In order to find the molar mass, you just need to add up the mass from the periodic table and add them up together
 carbon- 12.01 (6) = 72.06 g
hydrogen- 1.008 (12) = 12.096 g
chlorine- 35.45 (2) = 70.90 g
oxgyen- 16.00 (2) = 32.00 g

72.06 + 12.096 + 70.90 + 32.00 = 187.056 g/mol 
hope this helps! 

The molar mass of the empirical formula CH2ClO for the compound C6H12Cl2O2 is 65.476 g/mol, calculated by summing the atomic masses for carbon, hydrogen, chlorine, and oxygen.

The student is asking about the molar mass of the empirical formula for a compound with the formula C6H12Cl2O2. An empirical formula represents the simplest whole-number ratio of the elements within a compound.

For the given compound, its empirical formula is CH2ClO. To find the molar mass of this empirical formula, we sum the atomic masses of each element, adjusting for the number of atoms present. The atomic masses are approximately 12.01 g/mol for carbon (C), 1.008 g/mol for hydrogen (H), 35.45 g/mol for chlorine (Cl), and 16.00 g/mol for oxygen (O).

The calculation is as follows:

(1 \\u00d7 12.01 g/mol) for C(2 \\u00d7 1.008 g/mol) for H(1 \\u00d7 35.45 g/mol) for Cl(1 \\u00d7 16.00 g/mol) for O

Adding them together, the molar mass of the empirical formula CH2ClO is:

12.01 + (2 \\u00d7 1.008) + 35.45 + 16.00 = 65.476 g/mol.

Therefore, the molar mass of the empirical formula for the compound is 65.476 g/mol.

Which of these practices does the most to keep wind and water from carrying away topsoil?

A. Crop rotation
B. Integrated pest management
C. Drip irrigation
D. Cover crops

Answers

i believe the answer is Cover crops. Cover crops are types of crops planted with a main purpose of managing soil erosion, soil fertility, soil quality, water weeds, pests, diseases, biodiversity and wildlife in an agriecosystem. Therefore, in this case the cover crops would prevent erosion by water and wind. By planting cover crops we help stabilize the soil and protect the top soil layer by not exposing it to erosion by water and wind.

Answer:

The correct answer is Cover Crops

In the diagram, above, marker D is pointing to a __________, which is a landform that forms when a river slows down as it flows into an ocean or lake. As the river slows, it drops its sediment load, gradually creating a network of small channels and islands.

Answers

When a river flows in an ocean or lake its called a Delta. Marker D is pointing to a Delta.

A sample of neon occupies a volume of 375 ml at stp. What will be the volume of neon If the pressure is reduced to 90.0 KPA?

A. 422 ml
B. 422 L
C. 333 ml
D. 333 L

Answers

At STP conditions value of absolute pressure is 101.325 kPa.


From the given data we can determine the new volume of neon using following proportion:


V : V1 = p : p1 


375 : V1 = 101.325 : 90


101 * V1 = 90 * 375


V1 =33750/101 =333ml

Since neon is a noble gas we can easily assume its behaviour to be an ideal gas. In ideal gases pressure is said to be inversely proportional to volume,
at fixed temperature, this is Boyle's law.

Therefore we can use this law to state the following equation
P1V1/T1 = P2V2/T2
in this case temperature is fixed therefore it can be eliminated,
then,
P1V1 = P2V2
standard pressure (P1) is 101 325 Pa
V1 = 375 ml
P2 = 90 000 Pa
substituting these values,
101 325 Pa * 375 ml = 90 000 Pa * V2
                          V2 = 101 325 * 375 / 90 000
                               = 422.18 ml
       After rounding off the final answer is option A - 422 ml

Part a use valence bond theory to devise a hybridization and bonding scheme for co2. match the words in the left column to the appropriate blanks in the sentences on the right. make certain each sentence is complete before submitting your answer.

Answers

Q1)
first lets draw the lewis structure for CO₂
C is the central atom with O atom on either side of C
O - C - O
the number of valence electrons around each atom 
C- 4
O - 6
O - 6
total number of valence electrons - 16
number of electron pairs - 16/2 = 8
1 pair is shared between 1 O atom and C and another electron pair is shared between C and other O atom 
that leaves us with 8 -2 = 6 pairs 
add 3 pairs each for O atoms as lone pairs and octets for both O atoms are completed. But in C the octet is not complete yet. So we convert the 2 single bonds between C and O to 2 double bonds on either side. then octet of C is complete. number of lone pairs around O is reduced to 2 lone pairs.
the structure is as follows
  ..            . .
: O = C = O :
to determine the geometry lets use VSEPR
number of valence electrons around C - 4
number of bonds around C (2 O with 2 electrons contributed - 4
total number of electrons - 8
number of electron pairs - 4
VSEPR geometry for 4 pairs with no lone pairs is linear geometry

1. The lewis structure for CO₂ has a central carbon atom attached to oxygen atoms through two double bonds.

2. Carbon dioxide has a linear electron geometry

3. Carbon atom is sp hybridized.

4. Carbon dioxide has two C(p)-O(p) π bonds and two O(sp²)-C(sp) sigma bonds.
the geometry of CO₂ linear means its sp hybridised where each orbital has 50% s and 50% p character. One s orbital and one p orbital have mixed and form 2 sp orbitals. the remaining p orbitals take part in π bonds and sp orbitals take part in sigma bonding. So between C and O there's one sigma bond and one pi bond. Altogether 2 sigma bonds and 2 pi bonds.
O has 3 sp² orbitals with 2 of them being lone pair orbitals. One sp² orbital bonds with sp orbital of C forming a sigma bond. the other p orbital of O bonds with p orbital of C forming a pi bond.

Silver has a density of 10.5 g cm3 and gold has a density of 19.3 g/cm3. which would have the greater mass, 5cm^3 of silver or 5cm^3 of gold?

Answers

Some one who has an idea of variation would solve this without a problem...

Silver has density = 10.5g/cm³ and a volume of 5cm³

Gold has a density = 19.3g/cm³ and volume of 5cm³

If you observe the volumes are the same...

Density = mass/volume
Mass = density × volume

Since the volume is constant, the material with the greater density will have the greater mass and that's gold....

You might want to test

For gold mass = 19.3×5 = 96.5g
For silver mass = 10. 5 ×5 = 52.5g

96.5g>52.5g so gold has a higher mass....

what would you notice about the dot diagram of an unstable element?

Answers

An unstable element would not have a full outer electron shell.

The dot diagram of an unstable element  has incompletely filled shell that is it will not have 8 dots which represent a stable octet.

What is an element?

It is defined as a substance which cannot be broken down further into any other substance. Each element is made up of its own type of atom. Due to this reason all elements are different from one another.

Elements can be classified as metals and non-metals. Metals are shiny and conduct electricity and are all solids at room temperature except mercury. Non-metals do not conduct electricity and are mostly gases at room temperature except carbon and sulfur.

The number of protons in the nucleus is the defining property of an element and is related to the atomic number.All atoms with same atomic number are atoms of same element.

Learn more about element,here:

https://brainly.com/question/14347616

#SPJ2

There are ________ hydrogen atoms in 25 molecules of c4h4s2.

Answers

4 hydrogen atoms

please thank me

Answer: 100.


Explanation:


1) The subscripts to the right of each element (symbol) in the chemical formula tells the number of atoms of that element present in one unit formula.


2) The unit formula of C₄H₄S₂ is equal to 1 molecule.


3) Therefore, there are 4 carbon atoms, 4 hydrogen atoms and 2 sulfur atoms in each molecule of C₄H₄S₂.


4) Then, you just have to multiply the corresponding subscript of the element times the number of molecules (25 in this case) to find the number of atoms of that kind.


5) These are the calculations for each element in the molecule C₄H₄S₂.


i) C: 4 × 25 = 100

ii) H: 4 × 25 = 100

iii) S: 2 × 25 = 50.


6) The question is about H only, so the answer is that there are 100 hydrogen atoms in 25 molecules of C₄H₄S₂.

Which renewable energy source depends on changing water levels?

Answers

water dams are a renewable energy source that depends on water levels.
the answer is hydroelectric power

fast-moving glaciers that can move up to 6 kilometers per year.

Answers

Surging glaciers experience a significant increase in movement, moving at speeds much faster than the average glacier.

A glacial surge is a sudden increase in the speed of a glacier, often moving tens of meters per day, which is significantly faster than the typical glacier movement. Glaciers generally move by pseudo-plastic flow and their velocity is greatest at the surface, tapering off towards the base due to internal deformation and basal slipping. While average glacier speed is around 10 inches per day, surging glaciers can greatly exceed this, with some known to move up to 6 kilometers per year.

Notable examples of surging glaciers include the Hubbard Glacier, which in 1986 surged across the Russell fjord, and Greenland's fast-moving Jakobshavn glacier. Surging can be caused by various factors, but one believed to be significant is the buildup of water pressure beneath the glacier, which effectively 'floats' the ice, letting it slip over the bedrock. The presence of looped moraines on the glacier surface is a key indicator of a surging glacier.

When taking measurements, you must consider _____.
- accuracy, precision, and uncertainty
- only accuracy
- only precision
- only uncertainty

Answers

accuracy, precision, and uncertainty. Hope this helps!!
Hey there!

Your answer is the first option.
When taking measurements, you must consider all:
Accuracy, precision, and uncertainty.

Hope this helps you.
Have a great day!

How many calories of heat energy are required to melt 20 grams of ice at 0 °c?

Answers

The latent heat of fusion of ice is 80 calories per gram. This means that if we have 20 grams of ice to be melted from solid to liquid at the freezing point of 0 degrees C, we find the total heat requirement by:
Q = m(Lf) = (20 g)(80 cal/g) = 1600 calories
So the total heat requirement is 1600 calories.

In which medium would light have the longest wavelength? water air glass diamond

Answers

I think the correct answer is air! 

the answer is b air

A compound has the empirical formula CH2O. If the compound’s molecular mass is 180 g/mol, determine the molecular formula of the compound. Be sure to show your work.

Answers

The molecular formula will be a multiple of the empirical CH2O. One unit of CH2O has a mass of 12+2*1+16 = 30 g. This means that if our compound has a molecular mass of 180 g/mol, we can divide 180 / 30 = 6 units, and our compound has 6 units of CH2O. This means that its molecular formula is C6H12O6.

Which hypothesis led to the discovery of the proton?

Answers

When a neutral hydrogen atom loses an electron a positively charged particle should remain. A proton is a subatomic particle, symbol p+, with a positive charge of +1e elementary charge and mass slightly less than that of a neutron.
Ernest Rutherford discovered that the atom must have a concentrated positive center charge that contains most of the atom's mass. He suggested that the nucleus contained a particle with a positive charge the proton. 

Answer:

a ) when a neutral hydrogen atom loses an electron, a positively-charged particle should remain

SUPER EASY!

12 POINTS

Choose all that apply.
Which of the following contribute to your body's digestive process?

muscle
movements
chemical reactions
physical processes
respiration

Answers

The answer is muscle,chemical reactions,respiration
hope this helps
wadewilson
Hey friend,

The answer is MUSCLE MOVEMENTS,RESPIRATION,CHEMICAL REACTION.

 MUSCLE MOVEMENTS
The food taken from mouth which goes to oesophagus then to stomach then to duodenum , jejunum , ilium , then to large intestine (caecum,colon,rectum)
then finally it excretes out 

Muscle movements helps in the passing of food from mouth to anus.

Basically the term is called Peristalsis .

So, the answer is MUSCLE MOVEMENTS.

RESPIRATION
It is the breakdown of oxidation of glucose to produce ATP.
Energy is needed by muscles to do work.

So, the answer is RESPIRATION.

CHEMICAL REACTION
Above we see respiration is also contribute to DIGESTION 
as respiration is a chemical process hence it also contribute to digestion 

So the answer can be CHEMICAL REACTION


HOpe this helps!!

Based on a kc value of 0.200 and the given data table, what are the equilibrium concentrations of xy, x, and y, respectively? express the molar concentrations numerically.

Answers

Without additional data from the data table regarding initial concentrations and change, we cannot calculate the equilibrium concentrations of XY, X, and Y based on the provided Kc value. An ICE table and the presumed small value of x in concentration changes are needed to employ the equilibrium constant effectively.

To calculate the equilibrium concentrations of XY, X, and Y based on the given Kc value of 0.200, we need additional data from the data table. The statement mentions XY, X and Y but only provides information about X2, Y2, and Ke. Assuming we are dealing with a chemical equilibrium that can be represented as:

X2 + Y2 → 2XY

A mathematical expression for the equilibrium constant Kc can be written as:

[tex]Kc = [XY]^2 / ([X2][Y2])[/tex]

Since an ICE table and initial concentrations are not provided in the question, we cannot calculate the equilibrium concentrations without that information. Additionally, Ke may refer to the equilibrium constant in terms of pressure (Kp), so it's unclear how to proceed without more context. The provided value of Ke or Kc needs to be used with the initial concentrations to determine equilibrium concentrations after setting up an ICE (Initial, Change, Equilibrium) table. Typically, to find x (the change in concentration), we assume x is small and can be ignored in the expressions (0.78 - x) and (0.21 - x) considering the very small Kc value, leading to a simplification in solving the equation for x, if applicable.

When atoms are split, from which part of the atom is the energy released?


nucleus


electrons


isotopes

Answers

The nucleus is the part of the atom where energy is released after said atom is split.

Hope this helped :3

Answer: Option (a) is the correct answer.

Explanation:

It is known that an atom consists of three sub-atomic particles which are protons, neutrons, and electrons.

When an atom splits then only neutrons and protons are involved and no electrons are involved into the reaction.

Hence, energy is released by the nucleus of the atom. And, these type of reactions reactions are known as nuclear reactions.

For example, [tex]^{16}_{8}O + ^{1}_{1}n \rightarrow ^{13}_{7}N + ^{4}_{2}He[/tex]

Whereas isotopes are the species which have same atomic number but different mass number.

Thus, we can conclude that when atoms are split, from nucleus of the atom is the energy released.

Example 1: urea, (nh2)2co, is used in the manufacture of resins and glues. when 5.00 g of urea is dissolved in 250.0 ml of water (d = 1.00 g/ml) at 30.0 c, 27.6 kj of heat is absorbed. (specific heat of water 4.18 j/g.c) is the solution process exothermic? what is ? what is the final temperature of solution?

Answers

a) i believe the reaction is exothermic, because 27.6 kg of thermal energy is gained by the water solution, the dissolution of urea is exothermic. Exothermic reaction is a chemical reaction that releases energy by light or heat. It is the opposite of an endothermic reaction where heat is gained by the reaction.

b) The water gained the heat released when urea dissolve. That is the water gained 27.6 kJ, while dissolution of urea released 27.6 kJ. Therefore, the heat gained is equal to the heat lost.

c) From part B, since heat gained is equal to heal lost, then
250 g × (Tf -30) ×4.18 J/g = 27600 J
 = 1045 Tf - 31350J = 27600 J
Tf = 56.41°C.
Therefore the final temperature  of the solution is 56.41°C

d) The initial and final temperature in Fahrenheit
°F = °C × (9/5) +32,
Thus, 30°C will be equal to 86° F
while 56.41 will be equivalent to  133.54 ° F


trampoline and playground

How does the shape of a molecule factor into its molecular polarity?

Answers

If a molecule has symmetry, then the charge is typically evenly distributed, making it non-polar.

What new inforamtion can you add the your definition of physical change?

Answers

More information is required to give a full answer.
A physical change is one in which a substance may change its form but still retain it's original chemical composition. An example of a physical change is a phase change where a substance changes from one phase (solid, liquid, gas) to another.
Using water as an example: As water changes from water vapor to liquid and freezes to ice, the chemical formula remains the same; H2O.

In what three catagories can chemical reactions be classified

Answers

Synthesis, decomposition, replacement.

What is the oxidation state of an individual nitrogen atom in nh4oh ? express the oxidation state numerically (e.g., +1)?

Answers

Final answer:

The oxidation state of an individual nitrogen atom in NH4OH is -3, determined by the rules for assigning oxidation states, where hydrogen is +1 and the ammonium ion has an overall charge of +1.

Explanation:

The oxidation state of an individual nitrogen atom in NH4OH can be calculated using the rules for assigning oxidation states. The compound NH4OH consists of the ammonium ion (NH4+) and the hydroxide ion (OH-). To find the oxidation state of nitrogen, we consider that hydrogen generally has an oxidation state of +1 when combined with nonmetals and oxygen has an oxidation state of -2. In NH4+, with four hydrogen atoms, each hydrogen atom contributes +1, for a total of +4. To balance this and give the overall charge of the ammonium ion (+1), the nitrogen must have an oxidation state of -3.

Furthermore, in OH-, the oxygen has an oxidation state of -2, and the single hydrogen has an oxidation state of +1. But since we are only interested in the nitrogen atom, we focus only on the NH4+ part of NH4OH. So, the oxidation state of an individual nitrogen atom in NH4OH is -3.

Other Questions
When might an author choose to quote a source?A . When she is using multiple sources to express different points of view.B . When it is a print sources , such as a newspaper article C. When she want to showcase another authors personality D . When she is unable to locate a complete citation a rectangular room is 1.7 times as long as it is wide and it's perimeter is 31 meters. find the dimension of the room What Harvard dropout co-founded Microsoft Which sentence is written correctly? He served aboard an aircraft carrier: in a dangerous job, crash and salvage crew. He served aboard an aircraft carrier in a dangerous job: crash and salvage crew. He served aboard an aircraft carrier in a dangerous job crash and salvage crew. A person in a rowboat two miles from the nearest point on a straight shoreline wishes to reach a house six miles farther down the shore. if the person can row at a rate of 3 mi/h and walk at a rate of 5 mi/h, find the least amount of time required to reach the house. how far from the house should the person land the rowboat? Can anyone help me please A rectangle prism has length of 20 inches, a width of 2 inches and height of 3 1/4 inches. The prism is filled with cubes that have edge lengths of 1/4 inches. How many cubes are needed to fill the rectangle? Read the sentence and select the indefinite adjective. Some tourists from Chicago took pictures of the toucans. Quin da qu a quin? Hoy es el da despus del da de Valentine. Explica quin dio qu regalos a quin usando el "le" y "les." How did the railway labor act amendments of 1934 affect the brotherhood of sleeping car porters? Which literary term describes the anxiety and anticipation a reader feels about what might happen next in the story The role of the piano in an art song is to A. improvise based on the singer's melody. B. help tell the story. C. imitate an entire orchestra. D. play only chords. How do you determine the chemical reactivity for metals using the periodic table? 12. Which one of the following is a geometric sequence? A. 7, 10, 23, 36, . . . B. 8, 4, 2, 1, 1/2, 1/4, . . . C. 2, 3, 9/2, 18/4 D. 0, 1, 2, 3, . . . Are the needs of people ever more important than the needs of animals and the planet? Why? Which region of the brain produces emotions, processes feelings of pleasure and pain, and triggers feelings of hunger and thirst? Which of these BEST summarizes human population growth on the planet Earth? What is the name of the thermodynamic barrier that must be overcome before products are formed in a spontaneous reaction? which vector best represents the net force acting on the -3 C charge in the diagramwxyz Your class built a tepee to use in the school play. The tepee has a diameter of 16 feet and a height of 13.5 feet. What is the volume? Use 3.14 for pi. Round your answer to the nearest whole number. please help thank you:)