Answer:
Most environmental consultants are employed by consultancy firms
Answer:
mostly consultancy firms.
Explanation:
please help me quickly i need to answer this question quickly
Answer: voltage
Explanation:
Electromagnetic waves can carry more data at higher frequencies. Why would a scientist opt to transmit data at a lower frequency instead?
Answer:Transmitting data over low frequency electromagnetic waves can reach great distances before attenuation because are not easily interfered with by obstacles like high frequency waves are. This is because they can diffract over obstacles and pass around them with less shadowing.
A disadvantage of using electromagnetic waves to transmit data is interference. One cause of interference is the transmission ton over same frequency hence the necessity to regulate these waves through policies. Other causes of interference are due to weather or obstacles.
Analogue signal is the decoding of electromagnetic waves into electric pulses (of varying amplitudes) by a decoder and pass the electric circuit in the electronics. However, in digital signal, electromagnetic waves are converted to binary format (0s and 1s). Therefore, analogue signal is a continous signal while digital is discretely broken down into bits.
Digital signal have the advantage of analogue signal over the fact that they can carry loads of information. Analogue signal draws more power than digital signal hence the later is eco-friendly. Digital signals are less likely to be affected by noise unlike analogue signals.
One major application for analogue signals is their use is speakers and microphones. Nonetheless, contemporarily, there are emerging digital microphones and speakers. A popular example of application of digital signal is in the mobile communication industry. The shift from analogue to digital has been greatly revolutionalized communication
Answer:
his answer is so long just believe him not me also give him brainlyest or whatever
Which of the following is a common use for commas?
Separating two elements
Separating unrelated adjectives
Connecting two independent clauses
Connecting two dependent clauses
Answer:
connecting two independent clauses
The use of the commands is for connecting the two independent clauses, Hence option C is correct.
What is the use of commas?The use of commas is for the punctuation mark and appears in several types of languages and indicates the brief phases, it is used for separating the words.
The commas use refers to the connection of the independent clauses that can be sen in the example that my estate is for my husband, son, daughter-in-law, and nephew.
Find out more information about the commas.
brainly.com/question/14588824
What’s tree about freedom of expression
What unit of measurment would be used to measure current?
Answer:
The S. I unit of current is Amphere
Motion is defined as a change in an object's position when compared to other objects around it. Mary Ann was watching a slug crawl across the driveway. She saw that a small rock was beside the slug when she first started watching it.
Since a slug moves so slowly, how does Mary Ann know that the slug is actually in motion?
A) She can tell the slug is moving because time has passed.
B) She can tell the slug is moving because she set her watch.
C) She can tell the slug is moving by never taking her eyes off of the slug.
D) She can tell the slug is moving by comparing the change in distance between the rock and the slug.
Answer:
Explanation:
Do it yourself bum
Mary Ann can tell the slug is moving by comparing the change in distance between the rock and the slug. Hence, the correct option is D.
Interpreting the motion of an object
Motion is defined as a change in position relative to a reference point. In this scenario, the rock acts as a reference point for Mary Ann.
If Mary Ann observes the distance between the slug and the rock changing over time (the slug getting further away from the rock), she can determine that the slug is moving even though it's slow.
Hence, the correct option is (D.)
Sheldon Adelson’s financial contributions to both Newt Gingrich’s political campaign and Donald Trump’s political campaign is an example of the proletariat trying to manage the laws that govern the economy.
Sheldon Adelson’s financial contributions to both Newt Gingrich’s and Donald Trump’s political campaign is given below.
Explanation:
1.Sheldon Adelson is the chairman and CEO of the Las Vegas Sands Corporation. He has contributed to numerous Republican campaigns and organizations. He supported Newt Gingrich and Mitt Romney in the 2012 presidential campaign and Donald Trump in the 2016 campaign.
2. Adelson donated to American Solutions for Winning the Future, a political action committee connected with Newt Gingrich, and supported Gingrich's presidential campaign in 2012.He donated to Mitt Romney’s presidential campaign after Gingrich dropped out of the race.
3. Casino mogul Sheldon Adelson has given $5 million to an independent committee supporting GOP presidential aspirant Newt Gingrich, the first of what is expected to be many millions the Las Vegas billionaire plans to spend this election year. The check from Adelson is the latest in an avalanche of campaign cash flooding the presidential season to independent groups known as Super PACs The check was cut on Friday to Winning Our Future, a group run by former Gingrich associates, according to two people close to the donor.
4. He sat out the Republican primary season during the 2016 presidential campaign but on September 23, he announced a $25 million donation to Donald Trump's 2016 presidential campaign, making him the largest donor to the Trump campaign and the largest donor in the presidential election.
5. The billionaire casino owner Sheldon Adelson, an ardent pro-Israel conservative, is expected to donate at least $100m to boost Donald Trump’s 2020 re-election efforts and Republican congressional candidates this fall, say three Republican fundraisers familiar with Adelson’s initial plans.
The greater the force applied to an object, the _____ the change in speed or direction of the object.
A) equal
B) greater
C) lesser
D) slower
Option.B-Greater is the correct answer.
The more force exerted to an object, the more the object's speed or direction will change.
What is Newton second law of motion?An object accelerates whenever it increases its speed, decreases its speed, or changes direction.When an unbalanced force acts on an item, acceleration happens. The mass of the object and the net force acting on it both have an impact on an object's acceleration.The influence of force and mass on acceleration is described by "Newton's second law of motion."According to the law, an object's acceleration is equal to its mass divided by the net force acting on it.The second law of Newton demonstrates that force and acceleration are directly related.An object of a given mass will accelerate more quickly the more force is applied to it. For instance, when the force acting on an item is doubled, so is the acceleration.Mass and acceleration have a different relationship. An inverse relationship exists.When one variable rises in an inverted connection, the other variable falls.The less an object accelerates when a certain force is applied, the more mass it has. For instance, when an object's mass is doubled, the acceleration is reduced by half for a given force.To know more about Newton's second law of motion click here-
https://brainly.com/question/13447525
#SPJ2
which of the following is the BEST example of statistical evidence?
Answer:
For me the answer was “the outcome of a series of scientific experiments”
Explanation:
The brake pad has a block of
material fastened to a metal
backing plate?
A)Steel
B) Wood
C)Friction
D)Oily
D)The brake pad has a block of friction material fastened to a metal backing plate.
Explanation:
A brake pad backing plate is designed in such a manner that it resists rust and maintain the adhesive bond between the friction material and plate over its entire life. Also, a brake pad backing plate must maintain dimensional stability.The brake pad has to be constructed quite well since It is a crucial as well as critical component in a brake system. A block of friction material meets all these characteristics and thus preferred as a material in brake pads.You wish to lift a 12,000 lb stone by a vertical distance of 15 ft. Unfortunately, you can only generate a maximum pushing force of 2,000 lb.
What is the amount of work you must input
in order to move the stone?
What is the actual mechanical advantage (AMA) required by a machine to complete the work
You build a ramp to create the ideal mechanical advantage. What is the length of the ramp in feet?
Answer:
A) 180000 lbft
B) 6
C) 90 ft
Explanation:
work to be imputed is
Wi = F x d
= 12,000 lb x 15 ft
= 180000 lbft of work
Work you can produce is
Wa = F x d
= 2000 lb x 15 ft = 30000 lbft
Mechanical advantage that will be needed = Wi/Wa = 180000/30000
= 6
Lenght of ramp = 6 x 15 ft = 90 ft
What is your energy source? Where can it be?
Answer:
food
Explanation:
my energy source is food.it provides chemical energy for the proper functioning of my body to work and be active
How do nozzles aerosolize liquids?
Answer:do you mean noddles
Explanation:not sure how to answer this.
A 1 μF capacitor has 2,652 Ω of reactance at 60-Hz. What is the reactance value at 400-Hz?
Answer:
???
Explanation:
A Barnes and Books is interested in purchasing a two-story building for a new
retail store. They plan to use the first floor as the display/sales area and the
second floor for storage of inventory. Before buying the property, they have sked
you to verify the building will be safe for the intended use. You must determine if
the interior columns will carry a load of 32 kips (32,000 lbs.), the columns rest on
spread footings which are 4'-0" X 6'-0" X 1'-6" thick. Note the column load does
not include the weight of the footing. If the footing rests on silty sand can the
Does footing safely carry the column load?
Answer:
Not if the footing is on silty sand.
Explanation:
The silty sand will make the columns sink in the ground.