Which best describes the current atomic theory?
A since it is only a theory it shouldn’t be used in practice
B it has not been tested enough to be useful for developing technology
C it is the most powerful explanation scientist have to offer at this time
D there is very lil change it will be changed in the future

According to Ohm's law, the voltage that produces a 6A current in a circuit that has a total resistance of 3Ω is 18 Volts.

Ohm's law states that the current passing through a conductor is directly proportional to its voltage. this can be expressed as,

[tex]I=\frac{V}{R}[/tex]

Where R is the ohm's constant called resistance measured in ohms.

From the law mentioned above, we can write Voltage as,

[tex]V=IR[/tex]

The circuit has 3Ω of resistance and the current flowing through it is 6A. Then the voltage of the circuit is,

[tex]\[\begin{align} & V=6\times 3 \\ & =18 \\ \end{align}\][/tex]V=6×3

 =18 volts

Thus, the required voltage for a circuit that has 3Ω of resistance and produces 6A of current to flow through it is 18 Volts.

Learn more about Ohm's law here-

https://brainly.com/question/14296509

#SPJ2

Answer:

The answer in B

Explanation:

I did the test and doubled check with my teachers.

Final answer:

Applying the conservation of momentum, the 50 kg astronaut ejecting 100 g of gas at 50 m/s in space will have a resulting velocity of 0.1 m/s in the opposite direction.

Explanation:

To calculate the resulting velocity of the 50 kg astronaut after ejecting 100 g of gas at a velocity of 50 m/s, we apply the principle of conservation of momentum, assuming a frictionless environment such as space. Before ejection, the astronaut and the gas are stationary, so their combined momentum is 0 kg*m/s. After the ejection, the momentum remains 0 kg*m/s, which means that the momentum gained by the astronaut is equal and opposite to the momentum of the ejected gas.

The mass of the ejected gas is 0.1 kg (100 g) and its velocity is 50 m/s, giving it a momentum of 0.1 kg * 50 m/s = 5 kg*m/s. To find the astronaut's velocity (v_astronaut), we use the equation:

Momentum of astronaut = - (Momentum of gas)

50 kg * v_astronaut = - (0.1 kg * 50 m/s)

This simplifies to:

v_astronaut = - (0.1 kg * 50 m/s) / 50 kg

Calculating this gives:

v_astronaut = - (5 kg*m/s) / 50 kg

So, v_astronaut = -0.1 m/s. The negative sign indicates the direction opposite to the ejected gas.

Therefore, the astronaut's resulting velocity is 0.1 m/s in the direction opposite to the direction of the ejected gas.

The relationship between mass and acceleration according to Newton's second law of motion is that acceleration is directly proportional to the net external force and inversely proportional to the mass of the object. So, larger mass leads to smaller acceleration for the same applied force.

According to Newton's second law of motion, the acceleration of a system is directly proportional to and in the same direction as the net external force acting on the system, and inversely proportional to its mass. This essentially means that the larger the mass of an object, the smaller its acceleration will be when a net external force is applied, due to the object's increased inertia. For example, if you try to push a car and a bicycle with the same amount of force, the car (which has a greater mass) will accelerate slower than the bicycle (which has less mass).

https://brainly.com/question/13447525

#SPJ2

D

A

A

D

B

D

just took on connections !!!!!

Hello. This question is incomplete. The complete question is:

"Which statement best describes how a wave would move differently through a pot of boiling water than the steam created from it? The wave would move faster through the water than through the steam. The wave would move slower through the water than through the steam. The wave would move the same speed through the water and the steam. The wave would move through the water and steam at the same speed, but decrease in speed at the transition point. "

Answer:

The wave would move faster through the water than through the steam.

Explanation:

As we already know, the water molecules at the moment when the water is boiling move very fast, due to the thermal energy that acts on them. This movement causes the mileculas to collide with each other quickly, for this reason we can observe that movement of the boiling water. This makes the wave movement in the boiling water fast.

On the other hand, all this movement is not seen in water vapor molecules, since the space between them is larger and there is no energy acting directly on them. For this reason, we can say that, through steam, the wave would not move with such speed.

Ans: C) 300,000 kilometers per second

Electromagnetic waves are created by the movement of charges. This results in the generation of electric and magnetic fields which oscillate in a direction perpendicular to each other.

Electromagnetic waves carry a certain wavelength, frequency and speed. The speed of such waves as they travel through space is equal to the speed of light (c) = 3*10⁸ m/s

since 1 km = 10³ m

speed, c = 1 km * 3*10⁸ ms-1/10³ m

                = 300, 000 km/s

Final answer:

The motion of moving the jump rope up and down creates transverse waves where the rope moves perpendicular to the direction of wave propagation. When waves from opposite ends meet, they interfere and superpose, forming various resulting wave patterns.

Explanation:

When a girl attaches the end of her jump rope to the trunk of a tree, evidence that the rope can support a transverse wave is observed by moving the free end of the rope up and down. This motion would cause the rope to move perpendicular to the direction of the wave's travel, which characterizes a transverse wave.

If there were two transverse waves created from opposite ends, with one wave traveling towards the other, one would anticipate seeing a superposition of the two waves when they meet. This interaction, where two waves overlap and combine, is an example of wave interference. The resultant wave pattern can vary depending on the relative phases and amplitudes of the interacting waves, illustrating concepts such as constructive or destructive interference.

To summarize, the maximum angular acceleration of the pendulum's swing is 0.019 rad/s², and the maximum restoring force is 0.479 N, calculated using the principles of simple harmonic motion and confirmed with energy conservation principles.

To find the maximum angular acceleration, we can use the formula for angular acceleration: α = δθ/δt². In the context of a simple pendulum like this one, the angular acceleration at its maximum displacement is α = g/L * sin(θ), where g is the acceleration due to gravity (9.81 m/s²) and L is the length of the pendulum. Substituting the given values in, we find α = (9.81 m/s²/7.00 m) * sin(8.0°) = 0.019 rad/s² to three decimal places.

The maximum restoring force can be found using the formula F = ma, where m is the mass and a is the acceleration. In this case, the maximum restoring force, F = 0.350 kg * 9.81 m/s² * sin(8.0°) = 0.479 N to three decimal places.

To confirm these calculations, we could use an alternative model, such as energy conservation. In the energy model, the potential energy at the point of maximum displacement (the highest point of swing) is converted to kinetic energy at the lowest point. We also know that maximum restoring force coincides with maximum displacement in simple harmonic motion, while maximum speed (already calculated and given as 1.156 m/s) coincides with the position of equilibrium (the bottom of the swing).

https://brainly.com/question/28208332

#SPJ12

Part (a):-  [tex]\( v_{\text{max}} = 1.156 \)[/tex] m/s, which is correct. This part is complete.

Part (b):- [tex]\[ \alpha_{\text{max}} \approx 0.0280 \, \text{rad/s}^2 \][/tex]

Part (c):- [tex]\[ F_{\text{max}} \approx 0.4806 \, \text{N} \][/tex]

Part (d):- These models provide a comprehensive approach to analyze the motion of the simple pendulum, considering kinetic energy, potential energy, and forces involved.

Given data:

- Mass of the pendulum bob,  m = 0.350  kg

- Length of the pendulum,  L = 7.00  m

- Maximum angle of displacement,[tex]\( \theta = 8.0^\circ = 8.0 \times \frac{\pi}{180} \)[/tex] radians

You've already found this to be [tex]\( v_{\text{max}} = 1.156 \)[/tex] m/s, which is correct. This part is complete.

The maximum angular acceleration occurs at the maximum displacement, when the restoring force is at its maximum.

1. Calculate the gravitational acceleration:

 [tex]\[ g = 9.81 \, \text{m/s}^2 \][/tex]

2. Calculate the maximum restoring torque:

  The torque due to gravity at maximum displacement is:

  [tex]\[ \tau = mg \sin \theta \][/tex]

  where[tex]\( \theta \)[/tex] is the angle of displacement.

  [tex]\[ \tau = 0.350 \, \text{kg} \times 9.81 \, \text{m/s}^2 \times \sin(8.0^\circ) \][/tex]

  [tex]\[ \tau \approx 0.350 \times 9.81 \times 0.1392 \approx 0.4806 \, \text{Nm} \][/tex]

3. Calculate the moment of inertia of the pendulum bob:

[tex]\[ I = m L^2 \][/tex]

 [tex]\[ I = 0.350 \, \text{kg} \times (7.00 \, \text{m})^2 = 17.15 \, \text{kg} \cdot \text{m}^2 \][/tex]

4. Calculate the maximum angular acceleration [tex]\( \alpha_{\text{max}} \):[/tex]

  [tex]\[ \alpha_{\text{max}} = \frac{\tau}{I} \][/tex]

  [tex]\[ \alpha_{\text{max}} = \frac{0.4806}{17.15} \][/tex]

  [tex]\[ \alpha_{\text{max}} \approx 0.0280 \, \text{rad/s}^2 \][/tex]

The maximum restoring force occurs at maximum displacement:

1. Calculate the maximum restoring force [tex]\( F_{\text{max}} \):[/tex]

  [tex]\[ F_{\text{max}} = mg \sin \theta \][/tex]

 [tex]\[ F_{\text{max}} = 0.350 \, \text{kg} \times 9.81 \, \text{m/s}^2 \times \sin(8.0^\circ) \[/tex]]

 [tex]\[ F_{\text{max}} \approx 0.350 \times 9.81 \times 0.1392 \approx 0.4806 \, \text{N} \][/tex]

Let's summarize the solutions using other analysis models:

1. Energy Analysis Model (Kinetic and Potential Energies):

  - Maximum speed of the bob: [tex]\( v_{\text{max}} = 1.156 \) m/s[/tex]

  - Maximum potential energy: [tex]\( PE_{\text{max}} = mgh \)[/tex]

  - Maximum kinetic energy: [tex]\( KE_{\text{max}} = \frac{1}{2}mv_{\text{max}}^2 \)[/tex]

2. Force Analysis Model:

  - Maximum restoring force: [tex]\( F_{\text{max}} = mg \sin \theta \)[/tex]

  - Maximum angular acceleration: [tex]\( \alpha_{\text{max}} = \frac{\tau}{I} \),[/tex] where [tex]\( \tau = mg \sin \theta \) and \( I = mL^2 \)[/tex]

The gravitational force between the planets when they are 4.5 billion kilo-meters apart [tex]2.0*10^{21}[/tex] N.

A force is an effect that can alter an object's motion according to physics. An object with mass can change its velocity, or accelerate, as a result of a force. An obvious way to describe force is as a push or a pull. A force is a vector quantity since it has both magnitude and direction.

Given in the question the planet Neptune has a mass of 1.02 x 10^26 kg, and earth's mass is 5.97 x 10^24 kg,

Newton's law of universal gravitation force is,

F = G m M/r²

F = [tex]6.67 * 10^{-11} * (1.02*10^{26})*(5.97×10^{24})/4500000000^{2}[/tex]

F = [tex]2.0*10^{21}[/tex]

The gravitational force between the planets when they are 4.5 billion kilo-meters apart [tex]2.0*10^{21}[/tex] N.

To learn more about force refer to the link:

brainly.com/question/13191643

#SPJ6

Answer:

1391

Explanation:

In a series circuit represented by Ohm's law, the correct formulas to use are I = I1 = I2 = I3 for region X and Req = R1 + R2 + R3 for region Y, indicating that current remains constant through components and resistances are additive.

Wendy is working with Ohm's law and electric circuits and needs to know which formulas apply to regions marked X and Y in her graphic organizer. Ohm's law describes the relationship between voltage (V), current (I), and resistance (R) in an electrical circuit and is given by V = IR. When multiple resistors are present in a circuit, their total or equivalent resistance (Req) and the total current depend on whether they are arranged in series or parallel.

In a series circuit, the total current (I) remains the same through all the components, and the voltages across each component add up. Hence, I = I1 = I2 = I3 which would be the correct formula for region X. For region Y, in a series circuit, the equivalent resistance (Req) is simply the sum of all individual resistances, thus Req = R1 + R2 + R3 is the correct formula.

However, in a parallel circuit, the voltage across all components is the same and the currents through each component add up to the total current, which is represented by I = I1 + I2 + I3, but this does not apply to the original question.

Power can be defined as the rate at which the work has been accomplished in a system. Thus, the correct option is D.

The power is the quantity which has only magnitude, that is a scalar quantity. The SI unit of power is watt, and it is also written as J/s or Joules per second.

Power can be defined as the rate at which the work is finished or the energy is transferred from one location to another or energy transformed from one form into another form.

The term energy is the capacity of a body to do work or result in some displacement by the application of some force.

Therefore, the correct option is D.

Learn more about Power here:

https://brainly.com/question/287674

#SPJ6

Answer:

the weight of the bookcase is 363N

A lever increases applied force by offering a mechanical advantage, which redistributes the force over a longer distance but does not change the overall work done, as work is the product of force and distance which remains constant.

A lever can increase the force applied without changing the amount of work being done by reallocating the distance over which the force is applied. The mechanical advantage provided by a lever allows a smaller input force to lift a heavier load. However, as with all machines, the lever does not change the amount of mechanical work done. This means that a lever that increases force will decrease the distance that the load moves, and the product of the force applied and the distance moved (work) remains constant. The mechanical advantage of the lever is the ratio of these forces, and it demonstrates how a simple machine outputs the same amount of work with a reduced effort force by increasing the distance over which the effort force is applied.

In practice, for instance, when we use a crowbar to lift a heavy object, we apply a small force over a larger distance at one end of the lever (the effort arm), and the crowbar applies a larger force over a shorter distance at the other end (the resistance arm) to lift the object. The work done remains the same since it is the product of force and distance.

Answer:

The answer is radio waves

Hope that helps! :)

Electrical energy is transformed into other forms of energy such as mechanical or thermal when passing through household devices like blenders or toasters.

When electrical energy passes through a household device such as a blender or a toaster, it is transformed into another form of energy. This process is known as energy transformation. For instance, in a blender, the electrical energy is converted into mechanical energy to spin the blades, and in a toaster, it is transformed into thermal energy to heat the bread. This transformation of energy allows the appliances to perform their respective functions.

Answer:

[tex]m = 2.72 \times 10^{-3} g[/tex]

Explanation:

total number of protons in 5 gram of total mass is given as

[tex]N = \frac{m}{m_p}[/tex]

here we have

[tex]N = \frac{5}{1.67262 \times 10^{-24}}[/tex]

[tex]N = 2.99 \times 10^{24}[/tex]

now to neutralize the charge we require same amount of negatively charge electrons

so we have

[tex]m = N(m_e)[/tex]

[tex]m = (2.99 \times 10^{24})(9.1 \times 10^{-28})[/tex]

[tex]m = 2.72 \times 10^{-3} g[/tex]