which food is not a heterogeneous mixture?
a. chocolate chip cookies
b. oil and vinegar dressing
c. cooking oil
d. trail mix

Answer:

See explanation

Explanation:

In yogurt are usually found, (several ) types of gram- positive bacteria. Those bacterias are used to made yogurt, and don't bring negative effects on the human body. These bacterias are Lactobacillus delbrueckii subsp. bulgaricus and Streptococcus thermophilus bacteria.

When doing a gram-staining on a yogurt sample, this staining will show a positive result if there are gram- positive bacteria present, what is most likely to happen.

In a yogurt sample, normally, no gram-negative bacteria will occur. Although, if gram - negative bacteria will be found. This means the yogurt sample is infected. Those bacteria are (probably) diarrhea causing bacteria such as E. coli and Salmonella.

If gram-negative bacteria are found in the sample, the gram-staining will be negative and show red/pink bacteria.

Answer:

The answer to your question is below:

Explanation :

The combined gas law as it name says it combines three gas laws: Boyle's law, Charles' law and  Gay Lussac Law. It states that at initial conditions of pressure, volume and temperature, it there is a change in one of this variables

the equilibrium will be equivalent to a second equilibria of pressure, volume and temperature.

                        [tex]\frac{P1V1}{T1}  =  \frac{P2V2}{T2} \\[/tex]

"1" indicates initial conditions

"2" indicates final conditions

The combined gas law is represented by the equation P1V1/T1 = P2V2/T2 and is used to model the behavior of gases when the number of moles and the ideal gas constant are constant.

The equation that represents the combined gas law is:

P1V1/T1 = P2V2/T2

This law combines Boyle's law, Charles's law, and Gay-Lussac's law, and it is used when the number of moles (n) of a gas and the ideal gas constant (R) are held constant. The combined gas law allows us to predict how a gas will behave under different sets of conditions in terms of pressure (P), volume (V), and temperature (T), assuming the amount of gas in moles does not change.

Examples of Gas Laws:

Boyle's Law: P1V1 = P2V2 (at constant n and T)

Charles's Law: V1/T1 = V2/T2 (at constant n and P)

Gay-Lussac's Law: P1/T1 = P2/T2 (at constant n and V)

Each can be derived from the combined gas law depending on which variables are held constant.

Answer:

Carbon (c) !!!! :)))))

Carbon (C) is the name and symbol of the element in the second row and fourteenth column of the periodic table , therefore  option (b) is correct.

The columns on the periodic table of elements are called groups. The elements in a group share the same configuration of valence electrons, which gives the elements similar chemical properties.

Properties of carbon element-

Carbon (C) is the name and symbol of the element in the second row and fourteenth column of the periodic table , hence  option (b) is correct among all.

Learn more about columns in  periodic table , here:

https://brainly.com/question/17105472

#SPJ2

Answer:

NO2

Explanation:

Molar mass of Nitrogen (N) is 14g/ mole . Molar mass of O is 16g/ mol. So the ratio of atoms of each is  :

Moles of O = mass of O / Molar mass O = 12 / 16 = 0.75 = 3/4 mole of O

Moles of N = mass of N / Molar mass N = 7 / 14 = 0.5 = 1/2 mole of N

So to scale these fractions to a whole number, multiply both by 4.

4 x 3/4 = 3 moles of O; 4 x 1/2 = 2 moles of N. This confirms your first answer: N2O3.

Do the same for the ratio 16:7.

Moles O: 16 / 16 = 1 mole of O

Moles of N: 7 / 14 = 1/2 mole of N

This means for each 1/2 mole of N we have 1 mole of O; or for each mole of N we have 2 moles of O : the ratio is 2.

Multiplying both by 2: N = 1 mole; O = 2 moles. So the molecule is NO2.

Answer:

0.733 J/g °C

Explanation:

Step 1 : Write formule of specific heat

Q = mc Δ T

with Q = heat transfer (J)

with m = mass of the substance

with c = specific heat ⇒ depends on material and phase ( J/g °C)

Δ T = Change in temperature

in this case :

Q = 38.5 J

m = 17.5g

c= has to be determined

Δ T = 3 (°C)

Step 2:  Calculating specific heat

⇒ via the formule Q = mc Δ T

38.5 J = 17.5g * c * 3

38.5 = 52.5 *c

c = 38.5 / 52.5

c = 0.733 J/g °C ⇒ 0.733 is reported to three significant digits due to the precision.

The specific heat of this metal is 0.733 J/g °C

Answer:

Negative numbers don't have real square roots since a square is either positive or 0.

Explanation:

Negative numbers don't have real square roots since a square is either positive or 0.

It depends, but this is how I would do it:

Let's take the square root of -8 --> [tex]\sqrt{-8}[/tex]

First, I would take out an "i" and put it outside of the square root:

[tex]i\sqrt{8}[/tex]

The i represents the negative sign. Then, I would treat the square root of 8 as a normal problem and simplify by factoring it:

Factors of 8: 2,2,2

Because you're looking for a square root and you can "loop" two 2s together, you can take one set out:

[tex]2i\sqrt{2}[/tex] would be your final answer.

Hope I helped :)

Answer:

[tex]1.21\times 10^4[/tex] cal would be needed to heat 5.0 lbs of copper from 22 degrees C to 80.0 degrees C.

Explanation:

[tex]Q=m \times c \times \Delta T[/tex]

where

[tex]\Delta T[/tex] = Final T - Initial T

Q is the heat energy in calories

c is the specific heat capacity (for copper 0.092 cal/(g℃))  

m is the mass of water

plugging in the values

[tex]$Q=5.01 b s \times 0.092 \frac{c a l}{g^{\circ} \mathrm{c}} \times\left(80.0^{\circ} \mathrm{C}-22^{\circ} \mathrm{C}\right)$[/tex]

Please Note:

1 lb = 453.592grams  

So,  

5 lbs = 5 × 453.592g  = 2268 g

[tex]$\begin{aligned} Q &=2268 g \times 0.092 \frac{c a l}{g^{\circ} \mathrm{C}} \times 58^{\circ} \mathrm{C} \\\\ Q &=12102 \mathrm{cal} \end{aligned}$[/tex]

[tex]=1.21\times10^4[/tex] cal (Answer)

Answer:

If three or more pounds of pressure is placed on glass, then it will break.

Explanation:

This is a hypothesis because it is a statement that can be tested and can be drawn a conclusion from, as you can see the others can be tested but then you have too many factors that are not taken care of, for example how big will the rock you throw to the glass be, glasses cna break because of changes in temperature, and other factors that weren´t taken into account when doing them that the only one that could work as a hypothesis would be: If three or more pounds of pressure is placed on glass, then it will break.

Final answer:

The best example of a hypothesis is "If three or more pounds of pressure is placed on glass, then it will break," as it is clear, specific, and testable.

Explanation:

The best example of a hypothesis among the given options is: "If three or more pounds of pressure is placed on glass, then it will break." This statement is a good hypothesis because it is testable, provides a specific condition (three or more pounds of pressure), and predicts a measurable outcome (the glass will break). A testable hypothesis is a crucial aspect of the scientific method.

It allows researchers to perform experiments to verify whether the predicted outcomes agree with the hypothesis or not. The process of testing is essential because it provides evidence to support or refute the proposed explanation. Furthermore, an effective hypothesis should ideally be clear and concise, providing a direct answer to a particular question, and should outline conditions that can be empirically examined.

Answer:

The correct answer for the given question is 20 neutrons.

Explanation:

As we know most of the elements have their isotopes present so the metal in the periodic table that has atomic number 19 and is named potassium has two stable isotopes.

One of the stable isotope is 39 and the other one is 41. The isotope of potassium that has atomic number 39 has the same number of Electrons and protons number of neutrons present in this isotope is 20.  

Answer:

Dependent  

Explanation:

It is called that because its value depends on changes the investigator makes.

Final answer:

The components that are a part of all scientific investigations include a scientific question, hypothesis, variables, control, procedure, and conclusion. These align with the scientific method and are essential in conducting a thorough and systematic inquiry.

Explanation:

The components that are part of all scientific investigations include several elements that align with the scientific method. These are essential for ensuring a systematic approach to the inquiry process. Let's review these components:

By following these components, scientists conduct thorough and replicable experiments that contribute to the body of scientific knowledge. Each step is crucial in ensuring results are reliable and valid.

Final answer:

The components of all scientific investigations include a scientific question, a hypothesis, variables, control, procedure, and a conclusion. These elements structure the investigation for consistency and repeatability.

Explanation:

The components that are part of all scientific investigations typically include:

These elements help in structuring a scientific investigation, allowing for repeatability and verifiability by other scientists.

Answer:

In gaseous form matter take the shape and volume of container.

Explanation:

Properties of gases:

Molecule of gases randomly move every where and occupy all available space.

Gases don't have definite volume and shape and take the shape and volume of container in which it present.

Their densities are very low as compared to the liquid and solids.

Gas molecules are at long distance from each other therefore by applying pressure gases can be compressed.

The very weak inter molecular forces are present between gas molecules.

Properties of Liquid:

Liquid have definite volume but don,t have definite shape.

Their densities are high as compared to the gases but low as compared to the solids.

In liquid, molecules are close to each other and have greater inter molecular forces as compared to the gas molecules.

Properties of solids:

Solids have definite volume and shape.

In solids molecules are tightly pack and very close to each other.

Their melting and boiling point are every high.

The densities of solids are also very high as compared to the liquid and gas.

There are very strong inter molecular forces are present between solid molecules.

Light slows down when traveling through more dense substances; does not require a medium to travel through; can be absorbed and transformed into heat; speeds up when traveling through less dense substances; is refracted when it changes direction and speed.

Light wave is a form of electromagnetic wave which enables us to see.

It is a form of transverse wave form.

Some of the properties of light wave include:

Therefore, the correct options are, Light slows down when traveling through more dense substances; does not require a medium to travel through; can be absorbed and transformed into heat; speeds up when traveling through less dense substances; is refracted when it changes direction and speed.

Learn more light waves at: https://brainly.com/question/15033563

#SPJ1

Light slows down when traveling through more dense substances; does not require a medium to travel through; can be absorbed and transformed into heat; speeds up when traveling through less dense substances; is refracted when it changes direction and speed.

Light wave is a form of electromagnetic wave which enables us to see.

It is a form of transverse wave.

Some of the properties of light wave include:

Therefore, the correct options are,

Learn more light waves Here ;
brainly.com/question/15033563

#SPJ1

Answer:

The momentum is 999 Kg.m/s.

Explanation:

Momentum:

It is the product of mass and velocity of moving object.

Formula:

P = m . v

P = momentum

m = mass

v = velocity

Unit:

Its unit is Kg. m/ s.

Given data:

mass = 90 Kg

velocity = 11.1 m/s

Solution:

p = m.v

p = 90 Kg × 11.1 m/s

p = 999 Kg.m/s

Answer:

because it contain  5 d-orbitals.

Explanation:

unlike alkali and alkaline earth metals, transition metals have 5d-orbitals. electrons are around the nucleus some are away and some are close to it. Electrons change their energy levels at suitable conditions and as transition metals having 5-d orbitals so its electrons can easily goes to other transition state thus causing multiple oxidation states.

Answer:

partially filled d sublevels

Explanation:

Answer:

H 1 one proton and no neutrons, H2  one proton and one neutron, H3 one proton and 2 neutrons.

H1 most abundant because average mass is 1.008, meaning far more have a mass of 1

Explanation:

Answer:

[tex]\boxed{1.574 \times 10^{5}\text{ ft}^{3}}[/tex]

Explanation:

1. Mass of ship in pounds

[tex]m = \text{4795 t} \times \dfrac{\text{2000 lb}}{\text{1 t}} = 9.590 \times 10^{6}\text{ lb}[/tex]

2. Mass of ship in kilograms

[tex]m = 9.590 \times 10^{6}\text{ lb} \times \dfrac{\text{1 kg}}{\text{2.205 lb}} = 4.349 \times 10^{6}\text{ kg}[/tex]

3. Mass of ship in grams

[tex]m = 4.349 \times 10^{6}\text{ kg} \times \dfrac{\text{1000 g}}{\text{1 kg}} = 4.349 \times 10^{9}\text{ g}[/tex]

4. Volume of water displaced

[tex]V = 4.349 \times 10^{9}\text{ g} \times \dfrac{\text{ 1.025 cm}^{3}}{\text{1 g}} = 4.458 \times 10^{9}\text{ cm}^{3}[/tex]

5. Volume of water in litres

[tex]V = 4.458 \times 10^{9}\text{ cm}^{3} \times \dfrac{\text{ 1L}}{\text{1000 cm}^{3}}= 4.458 \times 10^{6}\text{ L}[/tex]

6. Volume of water in cubic feet

[tex]V = 4.458 \times 10^{6}\text{ L} \times \dfrac{\text{ 1 ft}^{3}}{\text{28.32 L}}= \mathbf{1.574 \times 10^{5}}\textbf{ ft}\mathbf{^{3}}\\\\\text{The ship will displace } \boxed{\mathbf{1.574 \times 10^{5}}\textbf{ ft}\mathbf{^{3}}} \text{ of seawater}[/tex]

Final answer:

When an object floats in water, it displaces a volume of water equal to its weight. To find the volume of seawater displaced by a ship weighing 4795 tons, convert the weight to pounds and calculate the volume using the density of seawater. The ship will displace approximately 149,701 cubic feet of seawater.

Explanation:

When an object floats in water, it displaces a volume of water that has a weight equal to the weight of the object. To find the volume of seawater displaced by a ship with a weight of 4795 tons, we need to convert the weight to pounds and then calculate the volume using the density of seawater.

1 ton is equal to 2000 pounds, so the weight of the ship in pounds is 4795 tons * 2000 pounds/ton = 9,590,000 pounds.

The volume of seawater displaced is equal to the weight of the ship divided by the density of seawater. The density of seawater is 1.025 g/cm³, which is equivalent to 64.027 pounds per cubic foot.

So the volume of seawater displaced by the ship is 9,590,000 pounds / 64.027 pounds per cubic foot = 149,701 cubic feet.

Answer:

Explanation:

An element is a _distinct____ substance represented by a __chemical____ symbol. Chemical symbols have _one__ or _two__ letters. The first letter of a chemical symbol is always a _Capital_____ letter and the second letter is always a _small_____ letter.

Elements are distint substances that cannot be split up into simpler substances. Such substances are made up of one kind of atom. Each of them is usually symbolised by a capital letter or a capital letter followed by a small letter derieved from the English or latin or greek name of the element.

An element is a chemical substance that cannot be divided or changed into other chemical substances. Chemical symbols are one- or two-letter designations of elements, with the first letter always capitalized and the second letter (if present) in lowercase. Symbols may be based on English or Latin names.

An element is a chemical substance that can't be divided or changed into other chemi-cal substances by any ordinary chemical means. The smallest unit of an element is the atom.

A chemical symbol is a one- or two-letter designation of an element. Some examples of chemical symbols are O for oxygen, Zn for zinc, and Fe for iron. The first letter of a symbol is always capitalized. If the symbol contains two letters, the second letter is lower case. The majority of elements have symbols that are based on their English names. However, some of the elements that have been known since ancient times have maintained symbols that are based on their Latin names, as shown in Table 4.5.2.

Each element is designated by its chemical symbol, which is a single capital letter or, when the first letter is already “taken” by another element, a combination of two letters. Some elements follow the English term for the element, such as C for carbon and Ca for calcium. Other elements' chemical symbols derive from their Latin names; for example, the symbol for sodium is Na, referring to natrium, the Latin word for sodium.

Atoms in the periodic table are positioned based on their chemical properties and electron configuration. Elements with the same number of valence electrons are placed in the same group. The periodic table is read left to right and top to bottom, with elements arranged in order of increasing atomic number.

The position of two atoms in the periodic table can be explained based on their chemical properties and electron configuration. Atoms that have the same number of valence electrons, or electrons in their outermost energy level, are placed in the same group. For example, lithium (Li) and sodium (Na) are both in Group 1 because they each have one valence electron. The periodic table is read left to right and top to bottom, with elements arranged in order of increasing atomic number. The atomic number represents the number of protons in an atom's nucleus.

https://brainly.com/question/4195285

#SPJ12

Answer:

C

Explanation:

This is because you are guessing that since Mrs. Sparks always carries around books, she must be a great reader. All the other answers are just facts that you see. For c, you are guessing this.

Answer:

C

Explanation:

Must is the key word. An inference is a guess, you guess Ms. Sparks must be a great reader because she is always carrying around books. You don't know for sure she is a great reader which makes it an inference. Hope this helps!

Final answer:

Steel production requires a fluid phase to allow the removal of impurities and the addition of alloying elements, producing steel with specific properties including enhanced strength and durability. The introduction of processes like the Bessemer and open-hearth methods facilitated cheaper and more efficient steelmaking. Controlled diffusion of carbon and other elements during the fluid phase is crucial to achieving the desired qualities of steel.

Explanation:

Steel production is a critical process in industrial manufacturing, transforming wrought iron into steel with superior strength and durability. Steel goes through a fluid phase during production because this allows for the removal of impurities and the integration of essential alloying elements. The Bessemer process and the open-hearth process both revolutionized steelmaking, enabling production at higher temperatures and larger quantities, thus reducing costs and facilitating widespread industrial use.

During the fluid phase, controlled amounts of carbon and other elements such as manganese, chromium, nickel, tungsten, molybdenum, and vanadium are added to create various steel alloys tailored for specific applications. The presence of carbon is particularly crucial; if not carefully managed, excess carbon can make steel brittle.

Diffusion plays an essential role in this process, particularly in carburizing, which increases the surface hardness of iron by allowing carbon to diffuse into it at high temperatures, turning it into hardened steel. This phase is vital for achieving the correct balance of mechanical properties required for steel's various industrial uses.

Answer:

the correct answer is D

Explanation:

D is correct because it is true and is also used to share experiments with other scientists around the world

Answer:

hope this helps

Explanation:

Answer: The hydroxide ion concentration in the solution is [tex]1.778\times 10^{-11}M[/tex]

Explanation:

pOH is defined as the negative logarithm of hydroxide ion concentration present in the solution.

The equation used to calculate pOH of the solution is:

[tex]pOH=-\log[OH^-][/tex]

We are given:

pOH = 10.75

Putting values in above equation, we get:

[tex]10.75=-\log[OH^-][/tex]

[tex][OH^-]=10^{-10.75}=1.778\times 10^{-11}M[/tex]

Hence, the hydroxide ion concentration in the solution is [tex]1.778\times 10^{-11}M[/tex]

Answer:

The sum of all the charges should equal the charge on the ion.

Answer:The overall charge for the ionic compound must be neutral, which means the sum of the charges from the cations and anions should add up to zero

Explanation:

Answer:

10

Explanation:

the capacity for each shell for the first 20 elements can be given by

2.8.8.2

2 electrons in the first shell

8 in the 2nd and in the 3rd

and 2 in the 4th

so if both the first and 2nd shells are full,

2+8=10 electrons

Answer:

10 is the total number of electrons present in that atom.

Explanation:

The formula for total number of electron in nth shell is given by :[tex]2n^2[/tex]

First shell = 1

Number of electron in first shell,n = 1:

= [tex]2(1)^2= 2[/tex]

Number of electron in first shell,n = 2:

= [tex]2(2)^2= 8[/tex]

Total number of electrons in the atom with full first shell and second shell:

2 + 8 = 10

Answer:

Solid Molecules

Solid molecules are always together. If you need more help I'm here.

Answer:in solids the molecules are very close together with intermolecar spaces.

Explanation:

Answer:

C in the middle with 2x F and 2x Cl bound to it. Both F and Cl have 7 valence electrons. ( See photo)

Explanation:

Of the three ( C, F and Cl) carbon has the lowest electro negativity so we expect it to be in the middle.

C: 4e-  

F: 7e-  x 2 = 14e-

Cl: 7e-  x2 = 14e-

4+14+14 = 32 electrons : octet rule

CF2CL2 = Dichloro Difluoro Methane,

To draw the Lewis dot structure for CF2Cl2, begin by calculating the total number of valence electrons, arrange the atoms with Carbon in the center, then create bonds and distribute the remaining electrons to observe the octet rule. The final Lewis structure would satisfy the octet rule for all atoms in the molecule.

To draw the Lewis dot structure for CF2Cl2, we need to follow certain steps. Firstly, find the total number of valence electrons. Carbon (C) has 4, Fluorine (F) has 7 each, totaling 14 for the pair, and Chlorine (Cl) also has 7 each, totaling 14 as well for both atoms in the compound. This gives us a total of 32 valence electrons. Next, arrange the atoms with Carbon in the middle and fluorine, and Chlorine atoms surrounding it.

Now, draw a single bond between the Carbon and Fluorine atoms, and also the Carbon and Chlorine atoms to signify shared electrons and subtract the shared electrons from the total of 32. Each bond contains two electrons. The remaining 24 electrons should be distributed among the Fluorine and Chlorine atoms to satisfy the octet rule (each atom should have 8 electrons in its outer shell). This means adding three lone pairs to each Fluorine atom and each Chlorine atom.

The final notation would look like CF2Cl2 with each non-carbon atom surrounded by eight electrons, fulfilling the octet rule. The atom in the center, Carbon, also shares eight electrons, therefore, the octet rule is satisfied for every atom in the molecule.

https://brainly.com/question/28652824

#SPJ6

Answer:

2.343 g/ cm³

Explanation:

Density:

Density is equal to the mass of substance divided by its volume.

Units:

SI unit of density is Kg/m3.

Other units are given below,

g/cm3, g/mL , kg/L

Formula:

D=m/v

D= density

m=mass

V=volume

Symbol:

The symbol used for density is called rho. It is represented by ρ. However letter D can also be used to represent the density.

Given data:

density = ?

volume= 350 cm³

mass= 820 g

Now we will put the values in the formula,

d= m/v

d= 820 g/ 350 cm³

d= 2.343 g/ cm³

The density of silicon is 2.343 g/ cm³

The density of a sample of pure silicon, given its mass is 820 grams and its volume is 350 cm^3, is calculated by dividing mass by volume. Using this formula, the density of the silicon sample is approximately 2.34 g/cm^3.

The subject of your question falls under Physics and it is about the concept of density. More specifically, you are asking about the density of a sample of pure silicon. Density is defined as the mass of an object divided by its volume which is usually measured in grams per cubic centimeter (g/cm3). Given that the mass of the silicon sample is 820 grams and its volume is 350 cm3, we can calculate the density using the following formula for density:

Density = Mass / Volume

In this case, Density = 820g / 350cm3. So, the density of the silicon sample is approximately 2.34 g/cm3.

https://brainly.com/question/29775886

#SPJ3

Answer:

0.004012km

Explanation:

Problem:

Conversion of millimeters(mm) to Kilometers:

value given = 4012mm

Here, we are converting from a submultiple unit to a multiple unit.

Millimeter depicts 10⁻³m and kilometer stands for 10³m

Now, we must find how many exponents will take us from 10⁻³ to  10³

careful examination shows that if we multiply a power of 10⁶ to 10⁻³ it will give a 10³:

   i.e 10⁻³ x 10⁶ = 10⁻³⁺⁶ = 10³

Therefore,

       10⁶mm = 1km

      4,012mm = [tex]\frac{4012}{1000000}[/tex] = 0.004012km

To convert millimeters to kilometers, we have to remember that 1 kilometer equals 1000 meters and 1 meter equals 1000 millimeters, hence 1 kilometer equals 1,000,000 millimeters. So, 4012 millimeters is equal to approximately 0.004012 kilometers.

The subject of this question pertains to unit conversion within the metric system. Given a distance measured in millimeters (mm), we want to convert this to kilometers (km). To convert, we will utilize the fact that 1 kilometer equals 1000 meters and 1 meter equals 1000 millimeters. Therefore, 1 kilometer equals 1,000,000 millimeters.

To convert 4012 millimeters into kilometers, we divide 4012 by 1,000,000, which gives us approximately 0.004012 kilometers. So, the distance between the two milkweed plants on the caterpillar's map, when converted to kilometers, is 0.004012 kilometers.

https://brainly.com/question/19420601

#SPJ3