Which of the following is the best definition of a short circuit
A. A circuit that has a gap in the wire
B.A circuit that has little or no resistance
C.A circuit that uses little voltage
D.A circuit that uses very little wire

Answers

Answer 1
I think it's a circuit that has little or no resistance :3
Answer 2

Answer:

B.A circuit that has little or no resistance

Explanation: a circuit is said to be short circuit if it has little or no resistance.

Shirt circuiting is very dangerous and can be done intentionally or unintended

D could also be correct if an amount of wire is ought to be used and you use a little wire. Knowing that wires have internal resistance too.

It could lead to short circuit


Related Questions

In a thermostat, what property of the bimetallic coil allows it to contract and expand? The two metals absorb different amounts of thermal energy. The two metals are placed perpendicular to each other. The two metals burn at different temperatures. The two metals turn into liquids when absorbing energy.

Answers

Hello!

In a thermostat, the property of the bimetallic coil that allows it to contract and expand is that The two metals absorb different amounts of thermal energy. 

This bimetallic coil is used to transform thermal energy into mechanical movement. Two metals with different thermal expansivity are joined together parallelly and the changes of temperature cause bending in different directions depending on if the temperature is rising or descending. 

The differences in the thermal energy absorption of the two metals are the basis for the mechanism of this device. 

Answer:

The two metals absorb different amounts of thermal energy.

Explanation:

Temperature controlling device in an electric equipment like a heater, is called a thermostat.

A bimetallic strip contains two different metals. Each metal has its own characteristic property of expansion or cooling. Coefficient of thermal expansion has a different value for different metals.

The metal that has a higher expansion coefficients will expand more when  heated, compared to the metal that has a lower coefficient of expansion.

In a thermostat used in a heating circuit, the electric contact is cut off due to the bending of the bimetallic strip, when the desired temperature is reached.

Warhol's early paintings of these objects made him famous.

Campbell's soup cans

Coke bottles

comic strips

urinals

Answers

Soup cans is the correct answer
soup cans is the right answer. 

A capacitor with capacitance (c) = 4.50 μf is connected to a 12.0 v battery. what is the magnitude of the charge on each of the plates?

Answers

Final answer:

The magnitude of the charge on each plate of a 4.50 μF capacitor connected to a 12.0 V battery is 54 μC.

Explanation:

To find the magnitude of charge stored on each plate of a capacitor when a voltage is applied, you can use the formula Q = CV, where Q is the charge, C is the capacitance, and V is the voltage applied. Given a capacitor with a capacitance (C) of 4.50 μF and a voltage (V) of 12.0 V, we can calculate the charge (Q) as follows:

Q = CV = (4.50 μF) (12.0 V) = (4.50 × 10-6 F) (12.0 V) = 54 × 10-6 C = 54 μC

Therefore, the magnitude of the charge on each of the plates of the capacitor is 54 μC.

Learn more about Capacitor Charge Calculation here:

https://brainly.com/question/14048432

#SPJ12

To find the charge stored on a capacitor with given capacitance and voltage, use the formula Q = C × V. Substituting 4.50 μF and 12.0 V into the equation yields a charge of 5.40 × 10⁻⁵ C on each plate.

To determine the charge stored on a capacitor's plates, we use the formula:

Q = C × V

Where:

C is the capacitance in farads (F).V is the potential difference in volts (V).Q is the charge in coulombs (C).

In this case, we have a capacitance C = 4.50 μF (which is 4.50 × 10⁻⁶ F) and a voltage V = 12.0 V.

By substituting these values into the formula, we get:

[tex]Q = 4.50 \times 10^{-6} \, \text{F} \times 12.0 \, \text{V}[/tex]

Q = 5.40 × 10⁻⁵C

Therefore, the magnitude of the charge on each of the plates is 5.40 × 10⁻⁵ C.

Why does light refract when it encounters the glass in a lens?
A) because it speeds up, which causes it to bend
B) because it slows down, which causes it to bend
C) because it hits a dense medium, which causes it to bounce off
D) because it gets absorbed, which causes it to lessen in intensity

Answers

Hey there Donnell!

The reason to why light refract when it encounters the glass in a lens would be because it slows down, which causes it to bend, this would be the reason why  light refract when it encounters the glass in a lens.

I hope this helps you!

Answer:

B) because it slows down, which causes it to bend

Explanation:Light hits the glass in a lens because it slows down, which causes it to bend. The material of a lens is more optically dense than the air it is traveling from.

David’s doctor suspects that he has diabetes. Which of these should be performed by the doctor to confirm the suspicion?

Answers

Check for high levels of blood sugar in urine, weight loss, and get blood tested.

Hope this helps!

Please mark Brainliest!

-Belle

Answer: D.

Explanation: Glucose levels are only option that relates to realistic diagnosis

Rest of the answers-

a DNA analysis to identify genetic abnormalities

a physical exam to look for tumors

a study to observe David’s social behaviors

a test to check David’s glucose levels

Which of the following is the main evidence of life in the early universe?
A.) Dinosaur fossils
B.) Rock layering
C.) Plant remains
D.) Cyanobacteria

Answers

A) Dinosaur fossils because they were proven that there was life before us. we also found out that our old skulls had dinosaur teeth in the heads. that showed us that we were on the food chain. but now we aren't because we now have protected cities.

Answer:

Cyanobacteria.

Explanation:

The oldest forms of life would be considered the cyanobacteria from the options, this bacteria are called extremists because they can survive in environments with littlo to zero oxygen andis thought that they have been present from the early begining of the universe because they are the only living organisms known to mankind that are able to survive under those conditions.

a 50kg box is being pushed along a horizontal surface. the coefficient of kinetic friction between the box and the ground is 0.35.what horizontal force must be exerted on the box for it to accelerate at 1.20m/s^2

Answers

For Newton's second law, the resultant of the forces acting on the box is equal to the product between the mass of the box m and its acceleration a:
[tex]\sum F = ma[/tex] 
We are interested only in what happens on the x-axis (horizontal direction). Only two forces act on the box in this direction: the force F, pushing the box along the surface, and the frictional force [tex]F_f = \mu m g[/tex] which has opposite direction of F (because it points against the direction of the motion). Therefore we can rewrite the previous equation as
[tex]F-F_f = ma[/tex]
and solve to find F:
[tex]F=ma+F_f =m(a+\mu g)=(50 kg)(1.2 m/s^2+(0.35)(9.81 m/s^2))=[/tex]
[tex]=232 N[/tex]

Answer:

Net horizontal force, [tex]F_{net}=231.5\ N[/tex]

Explanation:

It is given that,

Mass of the box, m = 50 kg

The coefficient of kinetic friction between the box and the ground is 0.35, [tex]\mu=0.35[/tex]

Acceleration of the box, [tex]a=1.2\ m/s^2[/tex]

We know that the frictional force acts in opposite direction to the direction of motion. The net force acting on it is given by :

[tex]F_{net}=f+ma[/tex]

[tex]F_{net}=\mu mg+ma[/tex]

[tex]F_{net}=m(\mu g+a)[/tex]

[tex]F_{net}=50\times (0.35\times 9.8+1.2)[/tex]

[tex]F_{net}=231.5\ N[/tex]

So, the net force acting on the box is 231.5 N. hence, this is the required solution.

A soccer ball is traveling at a velocity of 50 m/s the kinetic energy of the ball is 500 j what is the mass of the soccer ball?

Answers

10 kg sorry if I'm wrong.

Answer:

Its 0.4kg

Explanation:

What resistance is needed in this rc circuit if the flash is to charge to 90% of its full charge in 22 s ?

Answers

Missing part in the text of the problem:
"a flash unit for a camera has a capacitance of1200μF."

Solution:
In a RC circuit, the charge of the capacitor at time t follows the relationship:
[tex]Q(t) = Q_0 (1-e^{- \frac{t}{\tau} })[/tex]
where [tex]Q_0 [/tex] is the full charge, and [tex]\tau = RC[/tex] is the time constant of the circuit. 

We can isolate [tex]\tau[/tex] from the previous equation:
[tex] \frac{Q(t)}{Q_0} = 1-e^{ \frac{t}{\tau} } [/tex]
[tex] \frac{t}{\tau} = -ln(1- \frac{Q(t)}{Q_0}) [/tex]
[tex]\tau = - \frac{t}{ln(1- \frac{Q(t)}{Q_0} )} [/tex]

We can now using the data of the problem. We know that after a time t=22.0s, the capacitor is at 90% of tis charge, therefore [tex] \frac{Q(t)}{Q_0} = 0.9[/tex]. So we find
[tex]\tau = - \frac{22}{ln(1-0.9)}=9.55 s [/tex]

And from this value we can find the value of the resistance R, since we know that [tex]\tau = RC[/tex]. Given [tex]C=1200 \mu F = 1200 \cdot 10^{-6} F[/tex], we have
[tex]R= \frac{\tau}{C}= \frac{9.55s}{1200 \cdot 10^{-6}F}=7958 \Omega = 7.96 k \Omega [/tex]

The compound PCl5 decomposes into Cl2 and PCl3. The equilibrium of PCl5(g) Cl2(g) + PCl3(g) has a Keq of 2.24 x 10-2 at 327°C. What is the equilibrium concentration of Cl2 in a 1.00 liter vessel containing 0.235 mole of PCl5 and 0.174 mole of PCl3? Remember to use the correct number of significant digits. Cl2 = Are the products or reactants favored?

Answers

To find the equilibrium concentration of Cl2 in the decomposition of PCl5, we start with initial concentrations, assume x is the change at equilibrium, and apply the equilibrium expression using Keq = 2.24 x 10^-2. Solving this for x yields the equilibrium concentration of Cl2, showing whether reactants or products are favored.

To determine the equilibrium concentration of Cl2 when PCl5 decomposes into Cl2 and PCl3, we can start with the provided concentrations and use the equilibrium constant (Keq).

The equilibrium equation for this decomposition is:
PCl5(g) \<=> Cl2(g) + PCl3(g)
and the given Keq is 2.24 x 10-2 at 327°C.

Let's assume x is the amount of PCl5 that decomposes to form x moles of Cl2 and x moles of PCl3 at equilibrium:

Initial moles of PCl5 = 0.235 molInitial moles of PCl3 = 0.174 molChange for PCl5 = -xChange for Cl2 = +xChange for PCl3 = +x

At equilibrium, we will have:

[PCl5] = (0.235 - x) mol / 1.00 L[Cl2] = x mol / 1.00 L[PCl3] = (0.174 + x) mol / 1.00 L

The Keq expression is:

Keq = [PCl3][Cl2] / [PCl5]

Plugging in the equilibrium concentrations:

2.24 x 10-2 = ((0.174 + x) × x) / (0.235 - x)

This equation can be solved for x to find the equilibrium concentration of Cl2. With the calculated value of x, it is possible to determine the favorability of the reaction. A small Keq value (< 1) typically indicates that reactants are favored, which suggests in this case, PCl5 would be favored at equilibrium.

An isotope of the element fluorine has 9 protons and 10 neutrons. What is the name of this isotope? fluorine-

Answers

Answer:

19

Explanation:

Fluorine-19.

The isotope of fluorine with 9 protons and 10 neutrons is named Fluorine-19. This is because the mass number of an isotope equals the sum of its protons and neutrons, and in this case, 9 (protons) + 10 (neutrons) = 19. The atomic number of fluorine is 9, which means any atom of fluorine will always have 9 protons. A normal (most commonly occurring) atom of fluorine also has a mass number of 19, deriving from 9 protons and 10 neutrons. This makes Fluorine-19 the only stable and naturally-occurring isotope of fluorine.

What is the voltage of a battery that will charge a 4.0 μf capacitor to ± 36 μc ?

Answers

The relationship between capacitance C, charge Q and voltage V for a capacitor is
[tex]V= \frac{Q}{C} [/tex]
In our problem, the charge accumulated on the capacitor is [tex]Q=36 \mu C= 36 \cdot 10^{-6} C[/tex], while its capacitance is [tex]C=4 \mu F=4 \cdot 10^{-6} F[/tex]. So, the voltage applied is
[tex]V= \frac{36 \cdot 10^{-6} C}{4 \cdot 10^{-6} F} =9 V[/tex]

5. Describe how a battery works. (4 points)

Answers

Hello,

Batteries have three parts, an anode (-), a cathode (+), and the electrolyte. The cathode and anode (the positive and negative sides at either end of a traditional battery) are hooked up to an electrical circuit. The chemical reactions in the battery causes a build up of electrons at the anode.

Hope this helps.

What does the law of conservation of energy state about energy in a closed system

Answers

It can't be destroyed or created, and in a closed system the energy is conserved.
I hope this helped!
~Wolfe<3

Explanation:

Law of conservation of energy: The energy of the system can neither be created nor destroyed. It can be transformed from one form to another.

In a closed system, the energy remains conserved. It is isolated from the surrounding.

For example, the ball is rolling from the inclined plane. At the top of the inclined plane, the potential energy is maximum. When the ball starts rolling then the kinetic energy starts increases. Here, the potential energy is converted into kinetic energy. The energy transformation takes place.

The earth's radius is about 4000 miles. kampala, the capital of uganda, and singapore are both nearly on the equator. the distance between them is 5000 miles as measured along the earth's surface. part a the flight from kampala to singapore takes 8.3 hours. what is the plane's angular velocity relative to the earth's surface? give your answer in â/h.

Answers

Plane's angular velocity relative to the earth's surface = 0.15 rad/hr

Explanation:

Radius of earth, r = 4000 miles

Angular velocity is the ratio of linear velocity and radius.

         [tex]\omega =\frac{v}{r}[/tex]

Linear distance from Kampala to Singapore = 5000 miles

Time taken = 8.3 hours

         Distance = Time x Velocity

         5000 = 8.3 x Velocity

         Velocity, v = 602.41 mph

Substituting in angular velocity equation

        [tex]\omega =\frac{v}{r}=\frac{602.41}{4000}=0.15rad/hr[/tex]

Plane's angular velocity relative to the earth's surface = 0.15 rad/hr

Final answer:

The plane's angular velocity in hours can be calculated using the angle in radians covered in one hour's flight and the Earth's radius, applying the formula for angular velocity.

Explanation:

To find the plane's angular velocity relative to the Earth's surface, we need to calculate how many radians the plane covers in an hour and then convert this to angular velocity in degrees per hour. The formula for angular velocity (ω) is ω = θ / t, where θ is the angle in radians and t is the time in seconds. Given that the Earth's circumference is approximately 24,900 miles, we can determine the angle by using the proportion θ / (2π) = distance / Earth's circumference. With the plane's distance being 5000 miles and the Earth's radius being 4000 miles, we use the arc length formula s = rθ, where s is the arc length (5000 miles), r is the radius of the Earth (4000 miles), and θ is the angle in radians. Solving this for θ gives us θ = s / r.

Learn more about Angular Velocity here:

https://brainly.com/question/30733452

#SPJ3

What are the properties of elements based on their placement on the periodic table?

Answers

the property are on there hope this helps

The _____ point is the point at which a liquid boils when at a pressure of 14.7 pounds per square inch absolute (psia). A. Boiling B. Combustion C. Flash

Answers

The answer is boiling point.
the boiling point of course

A generator has a terminal voltage of 113 v when it delivers 13.6 a, and 91 v when it delivers 25.3

a. calculate the emf. answer in units of v. 002 (part 2 of 2) 10.0 points calculate the internal resistance. answer in units of Ï.

Answers

From Kirchhoff's voltage law, the formula would be:
EMF E = terminal voltage + voltage across 'internal resistance[R]' of generator 
Using Ohm's Law, v = ir, let set up a pair of simultaneous equations:
E = 113 + 13.6R would be eq 1
and 
E = 91 + 25.3R would be eq 2
Rearrange these: 
(E - 113) / 13.6 = R 
(E - 91) / 25.3 = R 
(E - 113) / 13.6 = (E - 91) / 25.3 
25.3(E - 113) = 13.6(E - 91) 
25.3E - 2858.9 = 13.6 E - 1237.6
25.3E - 13.6E = 2858.9 - 1237.6
11.7E = 1621.3
E = 1621.3 / 11.7
E = 138.57 v

An electrical drill has 100 J of chemical energy. Of the 100 J, 45 J are transformed into kinetic energy and 20 J are transformed into sound. The remaining energy is given off as thermal energy.


What is the thermal energy of the drill?

Answers

The answer to this question is the thermal energy of the drill is 35 J

According to law of conservation of energy, the thermal energy of the drill is 35J.

What is law of conservation of energy?

The law of conservation of energy states that the total energy of an isolated system remains constant; it is said to be conserved over time.

Total energy = Kinetic energy + Sound energy+ Thermal energy

100 = 45+20+ Thermal energy

Thermal energy = 35J

To learn more about law of conservation of energy here

https://brainly.com/question/20971995

#SPJ2

Consider a ball rolling down the decreasing slope inside a semicircular bowl (the slope is steep at the top rim, gets less steep toward the bottom, and is zero (no slope) at the bottom). As the ball rolls from the rim downward toward the bottom, its rate of gaining speed

Answers

The answer would be:
It's rate of gaining speed decreases.
The rate at which speed changes is called acceleration, 
You can think of this problem as an inclined plane. But the angle of an inclined plane is constantly decreasing.
We know that on a frictionless inclined plane acceleration of an object is:
[tex]a=gsin(\theta)[/tex]
Where g is the gravitational acceleration of the Earth and [tex] \theta[/tex] is the angle of an inclined plane. 
Using our analogy, the ball would start on an inclined plane with a 90-degree angle and that angle would continue to decrease to zero. 
The sine function is 1 at 90 degrees and is equal to zero at 0 degrees. Since our acceleration is proportional to the sine, and sine function is decreasing with the angle, our acceleration is also decreasing.

When a clock reads 5.0 seconds a cart's velocity in the negative x direction is 3.0 m/s. when the clock reads 6.0 seconds, the cart's velocity in the positive x direction is 4.0 m/s. what is the magnitude (in m/s2) of the average acceleration of the cart?

Answers

Impulse is the change of momentum before and after the collision:
I = mv₁ - mv₂ = m (v₁-v₂)
m mass
v velocity

Impuls also is defined as the average force during a short period of time:
I = F * t = m * a * t
F average force
t time difference
m mass
a average acceleration

Combined:
m(v₁- v₂) = m * a * t
a = (v₁- v₂) / t
= (4m/s - (-3m/s)) / 6s - 5s
= 7m/s / 1s
= 7 m/s²


The kinematic we find the average acceleration of the body is 7 m/s²

Given parameters

The velocity at two instant of time t₁ = 5.0 s, v₁ = -3.0 m / s

           t₂= 6.0 s,  v₂ = 4.0 m / s

To find

The average acceleration of the body

Kinematics studies the movement of the carpus, establishing relationships between their position, speed and acceleration.

Average acceleration is defined as the change in velocity in a given time interval

             a_ {avg} = [tex]\frac{\Delta v}{\Delta t}[/tex]

Let's apply this expression to our case

let's set a reference frame where the positive direction of the x axis is positive, so v₁ is negative

         

             a_ {avg} = [tex]\frac{v_2 -v_1}{t_2 -t_1}[/tex]

             a_ {avg} = [tex]\frac{4- (-3)}{6-5}[/tex]

             a_ {avg} = 7 m / s²

In conclusion using kinematics we find the average acceleration of the body is 7 m / s²

learn more about average acceleration here:

https://brainly.com/question/17355747

What properties of titanium make it attractive for use in race-car and jet-engine components?

Answers

Titanium's high quality to weight proportion and corrosion protection at room and hoisted temperature makes it appealing for use in elite applications. High cost of titanium is the key purpose behind not utilizing it in traveler autos. The cost of large scale manufacturing of the parts would drive the last items cost fundamentally.

An arrow is shot from a bow at an angle of 35 degrees above horizontal with an initial speed of 50 m/s what is the arrows horizontal x and y components ?

Answers

These kinds of problems can be broken down to a simple right triangle where we want the side lengths.  Knowing the hypotenuse (50) and the angle, we can get the  other sides with trigonometry.  These sides are then the components of the original vector.  I drew it up for you here.

Answer: Horizontal component of arrow :40.955 m/s

Vertical component of arrow :28.675 m/s

Explanation:

The initial speed of the arrow = u = 50 m/s

The horizontal component of the arrow =[tex]u_x=u\cos\theta [/tex]

The horizontal component of the arrow =[tex]u_y=u\sin\theta [/tex]

Angle between the velocity vector and x component = 35°

Horizontal component of arrow :

[tex]\cos\theta=\frac{u_x}{u}[/tex]

[tex]\cos35^o=0.8191=\frac{u_x}{50}[/tex]

[tex]u_x=0.8191\times 50=40.955 m/s[/tex]

Vertical component of arrow :

[tex]\sin\theta=\frac{u_y}{u}[/tex]

[tex]\sin35^o=0.5735=\frac{u_y}{50}[/tex]

[tex]u_y=0.5735\times 50=28.675 m/s[/tex]

Horizontal component of arrow :40.955 m/s

Vertical component of arrow :28.675 m/s

Describe the energy transformations that occur from the time a skydiver jumps out of a plane until landing on the ground.

Answers

When the Skydiver jump out a plane, his Potential Energy is being converted or transform into Kinetic energy due to gravity. Hope this helps

Answer:

Before jumping from the plane, the skydiver has potential energy. When the skydiver jumps, the potential energy is transformed into kinetic energy, which increases until the skydiver reaches terminal velocity. Potential energy is then transformed into thermal energy.

Explanation:

Thats the answer

Lexy used the formula shown to calculate the force of gravity on a space shuttle. Fg = G What does 3 × 105 kg represent? the difference between Earth’s mass and the space shuttle’s mass the sum of Earth’s mass and the space shuttle’s mass the mass of Earth the mass of the space shuttle

Answers

Answer:

This term shows the mass of the space shuttle

Explanation:

We know that the mass of the Earth is 5.972 × 10^24 kg. Similarly the sum of  mass of earth and the mass of shuttle must be a greater number as compared to the number given. It simply means that the mass of earth is itself 5.972 × 10^24 kg and the value given is 3 × 105 kg so it is obvious that if was the sum then it must be greater than the mass of earth. Therefore we can say that this not the mass of earth, neither the sum of mass of earth and shuttle, but this is only the mass of space shuttle which is the last multiple choice.

Answer:

The answer is D

Explanation:

This theory lost its appeal when astronomers discovered quasars and cosmic background radiation.

Answers

the Steady State Theory is the answer to this I believe!

Answer:

The steady state theory

Explanation:

According to the steady state model of the universe, the universe is continuously expanding while maintaining average density as constant. According to the theory, matter is continuously being formed and creating new stars and galaxies while the old ones are becoming un-observable. There is no beginning or end of time.

On the other hand, the big bang theory describes that the entire matter of the universe was confined in a point and with the big bang, this point started expanding. This happened about 13.8 billion years ago. Of course the density and temperature of the universe was very high at the beginning. In the initial few minutes of the big bang, the universe expanded rapidly which resulted in the decrease in its density and temperature. After million years, the universe transparent for radiation to freely travel through space. Cosmic Microwave background is the remnant of this early universe and is a strong evidence of the Big Bang Theory. The number of quasars were greater in past than present which shows that universe is evolving with time.

A boy on a bicycle approaches a brick wall as he sounds his horn at a frequency 400 hz. the sound he hears reflected back from the wall is at a frequency 408 hz. at what is the speed is the boy riding his bicycle toward the wall? assume the speed of sound in air is 340 m/s.

Answers

Final answer:

The boy on the bicycle is approaching the brick wall at a speed of 5.88 m/s. This is calculated using the formula for the Doppler effect which describes a frequency shift due to relative motion of the source and the observer.

Explanation:

This problem deals with the Doppler effect, which is a shift in frequency perceived by an observer due to relative motion between the source of a wave (here, the bicycle horn) and the observer (the bicyclist hearing the reflected sound from the wall). In this case, we can use the formula for the Doppler effect when both the source and observer are moving towards each other:

f' = f (v + vo) / (v - vs)

where f' is the observed frequency (408 Hz), f is the source frequency (400 Hz), v is the speed of sound (340 m/s), vo is the observer's speed (the boy's speed) and vs is the source's speed (in this case, zero, since the wall is stationary).

Setting up the equation gives us:

[tex]408 = 400 (340 + vo) / (340 - 0).[/tex]

boy, gives us vo = 5.88 m/s. Thus, the boy is riding his bicycle towards the wall at a speed of 5.88 m/s.

Learn more about Doppler effect here:

https://brainly.com/question/28106478

#SPJ12

Final answer:

Using the Doppler effect principle, the speed of the boy on the bicycle relative to the air is approximately 6.8 m/s.

Explanation:

The scenario given in the problem is a classic example of the Doppler Effect: the change in frequency or wavelength of a wave in relation to an observer moving relative to the wave source. In this case, we have the frequency of the sound wave as observed in the stationary frame (400 Hz) and in the moving frame (the boy on the bicycle, 408 Hz). The speed of sound in air is given as 340 m/s.

The observed frequency f is related to the source frequency f0 and the speed of the observer v with respect to the medium (air in this case) by the formula: f = f0*(v + v0) / v, where v0 is the speed of the source of the wave.

Substituting the given values into the equation gives 408 Hz = 400 Hz * (340 m/s + v) / 340 m/s. Solving the equation yields the speed of the boy on the bicycle relative to the air, which comes out to be approximately 6.8 m/s.

Learn more about the Doppler Effect here:

https://brainly.com/question/15318474

#SPJ11

A proton is released from rest in a uniform electric field of magnitude 50000 v/m directed along the positive x axis and undergoes a displacement of 0.5 m in the direction of the electric field as shown. find the amount of the kinetic energy gained after it has moved 0.5 m..

Answers

The amount of kinetic energy gained after it has moved 0.5 m is calculated as [tex]4\times10^{-15}\ J[/tex].

Given:

Electric field, [tex]E = 50000\ V/m[/tex]

Displacement, [tex]d= 0.5\ m[/tex]

Kinetic energy is a term used in physics to refer to the energy that an item has as a result of motion. It's a fundamental idea that explains how an object's motion and energy state are connected.

The particle physics community frequently refers to energy in terms of electron volts , especially when addressing the energies of atomic and subatomic particles. An electron is said to have one electron volt of kinetic energy when it accelerates through an electric potential difference of one volt.

The kinetic energy is given as:

[tex]KE = eV\\KE = e\timesE\timesd\\KE = 1.6\times10^{-19}\times50000\times0.5\\KE = 4\times10^{-15}\ J[/tex]

Hence, the amount of kinetic energy gained after it has moved 0.5 m is calculated as [tex]4\times10^{-15}\ J[/tex].

To learn more about Kinetic energy, here:

https://brainly.com/question/999862

#SPJ12

A light bulb does 100 joules of work in 2.5 seconds. How much power does it have.

Answers

Final answer:

To calculate power, divide energy in joules by time in seconds. The light bulb with 100 joules of work done in 2.5 seconds has a power of 40 watts.

Explanation:

The student is asking how to determine the power of a light bulb based on the work done over time. The formula to calculate power is:

P = W / t

where P is power in watts (W), W is energy in joules (J), and t is time in seconds (s). In this case, the light bulb does 100 joules of work in 2.5 seconds. So, applying the formula:

P = 100 J / 2.5 s = 40 W

Hence, the power of the light bulb is 40 watts.

a college student exerts 100N of force to lift his laundry basket the weighs 75N. at what rate is the basket accelerated upwards?

Answers

You can use the formula A=F/M, the rate that it is being accelerated upward is 3.3, so about 3.

The mass of the basket = weight/acceleration due to gravity. (75/10=7.5 kg)

100 (upward force from girl) minus 75 (downward force from basket) is 25.
So 25=7.5a, which becomes 25/7.5, which equals 3.33 kg x m/s.

And when rounded, the momentum is about 3, (or 3 p).

Hope this helps!
Other Questions
The PIRLS finds girls ahead of boys in verbal skills in every nation by an average of _____ points What is the phrase that pays for the Unit 2 test review1. attitude2. values 3.self confidence4. sense of self mr. hapwe is buying new cowboy hats. All together the hats cost 75.12., The second hats cost twice as much as the first hat. what is the price of the more expensive hat? Which elevation zone on the image above is best suited for growing coffee, corn, wheat, and tobacco?A.Tierra NevadaB.Tierra TempladaC.Tierra CalienteD.Tierra Helada FDRs unofficial group of African American advisers was known as the _____. Theodora panel reflects stylistic continuity and exchange between the early christian and byzantine cultures because How does the officer who wraps the lieutenant's arm make him feel? an apisode of war? A wi-fi ______ is a wireless local area network that provides internet access to the public. 50 POINTS!Which of these was stipulated by the third Navigation Act, passed in 1663?A) Exports of sugar, tobacco, and rice must be routed through England.B) All exports from colonies must be routed through England.C) All imports to the colonies must be routed through England.D) All trade must be carried on with England or colonial-owned shippers.E) All exports of manufactured goods must be routed through England. How did the colonizers benefit from the colonies they controlled? Which of the following are literary techniques commonly used in speech-making? A.Repetition, rhyme, satireB.Anaphora, allegory, algorithmsC.Rhythm, rhyme, versesD.Repetition, anaphora, the list of three a card catalog is an example of ___? a library card print media a primary source nonprint media What is the effect of the second-person point of view in this excerpt? PAC donate money to both candidates running for the same office? The polynomial x3 + 64 is an example of a A.sum of cubesB.difference of cubesC.difference of squaresD.perfect-square trinomial Which term best describes Rome's political situation during the 3rd century? Question 3 options: A) stable B) republican C) placid D) chaotic You are walking in the forest and see a bear. According to the Cannon-Bard theory, what happens next? The perimeter of a quarter circle is 32.13 what is the quarter circles radius As a boy, what did the narrator practice o the parlor organ in the Nebraska Farmhouse? From the story A Wagner Matinee How are the functions y=x and y=x+5 related? How are their graphs related?