Which of the following is true about the speed of light?

A.) It is a constant when the light is traveling in a vacuum.

B.) It speeds up or slows down depending on the observer.

C.) It is slowest in a vacuum.

D.) It varies depending on the color of the light.

Answer:

Size and charge and speed

Explanation:

Gel electrophoresis  is method designed for the separation of DNA molecules. The are also used to separate other micromolecules like RNA and protein, etc. This separation takes place based on their size and charge. The molecule travels through the gel in all different directions but their speed are different and thus they are separated.

Gel electrophoresis is a technique used to separate DNA fragments based on their size.

Gel electrophoresis is a technique used to separate DNA fragments based on their size. It involves loading DNA samples onto a gel matrix and applying an electric current. Smaller DNA fragments move faster through the gel, resulting in bands at specific distances from the top of the gel. Molecular weight standard samples can be run alongside the DNA fragments to provide a size comparison. The separated DNA fragments can then be visualized by staining the gel with a DNA-specific dye.

Gel electrophoresis is a fundamental technique used in molecular biology, genetics, and forensics for various purposes, including DNA fingerprinting, DNA sequencing, and the analysis of PCR products. It provides a visual representation of DNA fragment sizes, enabling researchers to draw conclusions about genetic material and study genetic variations.

https://brainly.com/question/11252418

#SPJ11

Explanation:

Taking the incident light to be traveling in the + x-direction so that it is at normal incidence to the left side of the film(referred to as the "Front side"). This means the beam transmitted into the liquid is essentially as strong as the incident beam.

Almost all the light that is reflected off the back surface will get through the front surface. (But only 2.78% gets re-reflected off the the front surface back to the right) this means that there are two beams reflected to the - x-direction, one from the front surface and one from the back, and these beams are of almost equal intensity.

Hope this is helpful. Thanks

Answer:

a)

[tex]mv l[/tex]

b)

[tex]\frac{M }{(M + m)}[/tex]

Explanation:

Complete question statement is as follows :

A wooden block of mass M resting on a friction less, horizontal surface is attached to a rigid rod of length ℓ and of negligible mass. The rod is pivoted at the other end. A bullet of mass m traveling parallel to the horizontal surface and perpendicular to the rod with speed v hits the block and becomes embedded in it.

(a) What is the angular momentum of the bullet–block system about a vertical axis through the pivot? (Use any variable or symbol stated above as necessary.)

(b) What fraction of the original kinetic energy of the bullet is converted into internal energy in the system during the collision? (Use any variable or symbol stated above as necessary.)

a)

[tex]m[/tex] = mass of the bullet

[tex]v[/tex] = velocity of the bullet before collision

[tex]r[/tex] = distance of the line of motion of bullet from pivot = [tex]l[/tex]

[tex]L[/tex] = Angular momentum of the bullet-block system

Angular momentum of the bullet-block system is given as

[tex]L = m v r[/tex]

[tex]L = mv l[/tex]

b)

[tex]V[/tex] = final velocity of bullet block combination

Using conservation of momentum

Angular momentum of bullet block combination = Angular momentum of bullet

[tex](M + m) V l = m v l\\V =\frac{mv}{(M + m)}[/tex]

[tex]K_{o}[/tex] = Initial kinetic energy of the bullet

Initial kinetic energy of the bullet is given as

[tex]K_{o} = (0.5) m v^{2}[/tex]

[tex]K_{f}[/tex] = Final kinetic energy of bullet block combination

Final kinetic energy of bullet block combination is given as

[tex]K_{f} = (0.5) (M + m) V^{2}[/tex]

Fraction of original kinetic energylost is given as

Fraction = [tex]\frac{(K_{o} - K_{f})}{K_{o}} = \frac{((0.5) m v^{2} - (0.5) (M + m) V^{2})}{(0.5) m v^{2}}[/tex]

Fraction = [tex]\frac{(m v^{2} - (M + m) (\frac{mv}{(M + m)})^{2})}{m v^{2}} = \frac{(Mm v^{2} + m^{2} v^{2} - m^{2} v^{2})}{(M + m) m v^{2}}[/tex]

Fraction = [tex]\frac{(Mm v^{2} + m^{2} v^{2} - m^{2} v^{2})}{(M + m) m v^{2}}\\ \frac{M }{(M + m)}[/tex]

The question is about the physics principle of Conservation of Angular Momentum in a completely inelastic collision involving a bullet and a block attached to a rod. After the collision, their total angular momentum remains constant due to no external torques acting on the system. This allows the analysis of their post-collision movement.

The subject of this question is Physics and it deals with the concept of Conservation of Angular Momentum during a collision. When the bullet travels horizontally and hits the wooden block, it becomes embedded in it. In this scenario, the system of the block and bullet then starts moving as a single unit. This event is typically referred to as a completely inelastic collision.

The conservation of angular momentum principle states that the total angular momentum of a system remains constant if no external torques act on it. Here, the bullet-block system doesn't experience any external torques. Therefore, their total angular momentum before the collision is equivalent to their total angular momentum after the collision. This principle allows us to analyze the movement of the bullet-block system after the collision.

It's worth noting that in this setup, the block, the rod, and the position at which the bullet hits the block together form a simple physical pendulum. Therefore, the post-collision dynamics of the system could also involve oscillatory movements, which relate to the aspects of pendulum physics.

https://brainly.com/question/32554788

#SPJ11

The magnitude of the frictional force on the crate is 20 N.

The magnitude of the frictional force on the crate can be determined using the equation fs = μsN, where fs is the frictional force, μs is the coefficient of static friction, and N is the normal force. In this case, the normal force is equal to the weight of the crate, which is 40 N. Therefore, the frictional force is fs = (0.5)(40 N) = 20 N.

https://brainly.com/question/33562642

#SPJ3

Answer:

Explanation:

On the rod , three forces are acting .

1 ) its weight  from the middle point .

2 ) Tension in the wire in the horizontal direction

3 ) reaction force by the hinge which balances the other two forces

Now taking moment of forces acting on the rod about the hinge

and equating opposite moment

3.7 x 9.8 x .6 x cos 25 = T x .51 ( T is tension in the horizontal wire)

T = 38.6 N

a )

The horizontal component of the force exerted on the rod by the hinge

will balance the tension in the wire acting in horizontal direction so it will be equal to

38.6 N

b )  The vertical component of the force exerted on the rod by the hinge

will balance the weight of rod so it will be equal to

3.7 x 9.8 N

= 36.26. N

=

(a) The horizontal component of the force exerted on the rod by the hi1ge is 38.67 N.

(b) The vertical component of the force exerted on the rod by the h1nge is 36.26N.

The tension in the wire is calculated by applying the following formula as shown below;

We will apply the principle of moment, sum of clockwise moment is equal to sum of anti clockwise moment.

(a) The horizontal component of the force exerted on the rod by the hi1ge is calculated as;

taking moment of forces acting on the rod about the h1nge;

3.7 x 9.8 x .6 x cos 25 = T x .51

where;

3.7 kg x 9.8 m/s² x 0.6 m x cos 25 = Tₓ x .51 m

19.72 = 0.51Tₓ

Tₓ = 19.72 / 0.51

Tₓ = 38.67 N

(b) The vertical component of the force exerted on the rod by the h1nge will balance the weight of rod so it will be equal to;

Ty = 3.7 x 9.8 N

Ty = 36.26N

Learn more about moment of forces here: https://brainly.com/question/27282169

#SPJ3

Answer:

Option (B)

Explanation:

A rockfall is defined as a type of mass movement process, where the small and large fragments of rocks are weathered and fall down from the top of the cliff under the influence of gravity. It is a process that takes place in a dry condition. This means that it does not depend on the moisture content that could be present in the rock. The rock particles fall down by bouncing and rolling. The base of this rockfall area forms a collection of smaller to larger size rock fragments. This process mainly takes place in the region where the temperature of the area is very high and experiences comparatively less amount of rainfall.

Thus, this type of mass movement is the fastest of all and is not dependent on the amount of moisture content.

Thus, the correct answer is option (B).

The option that gives the type of mass movement that is the fastest and depends upon moist or saturated conditions the least is;

Option B; Rockfalls

To answer this question, let us analyze each of the options.

Option A; Solifluction; This occurs when is the soil becomes saturated and then the wet soil starts to flow down a slope. This alongside creep are the slowest types of mass movement.

Option B; Rockfall; These occur when rock fragments that could be tiny or huge fall down from cliffs that are steep. Thus, this is the fastest type of mass movement as it is not dependent on moist or saturated conditions.

Option C; Rockslides; These are also known as landslides and they occur when numerous amounts of loose rocks get to join with soils and suddenly fall down from a slope.

Option D; Soil Creep; This means a slow movement of soil material down a slope under the Influence of gravity.

Option E; Talus Creep; This is a very slow movement of individual rock fragments individually down a slope.

Looking at the analysis of the options above, we can say that the fastest form of mass movement is Rockfalls.

Read more at; https://brainly.com/question/14462983

Answer:

d = 5.8 m

Explanation:

Principle of work and energy

ΔE = Wf

ΔE = Ef-Ei

ΔE : mechanical energy change

Wf : Work done by kinetic friction force

Ef : final mechanical energy

Ei : initial mechanical energy

K =(1/2 )mv² :  Kinetic energy

U= mgh   :Potential energy

m: mass (kg)

v : speed (m/s)

h: high (m)

Data

vi= 5.00 m/s

vf=0

hi=0

hf=0

μk=0.220

Kinetic friction force

fk = μk* FN

FN = W  : normal force (N)

W = m*g : weight  (N)

FN= 9.8*m (N)

fk =0.220*9.8*m

fk = (2.156)*m    Equation (1)

Work done by the  kinetic friction force

Wf = -fk*d  (J)  Equation (1)

d: distance traveled by force

Principle of work and energy to the skier

ΔE = Ef-Ei

Ef = Kf + Uf = 0

Ei = Kf + Uf = (1/2)(m)(5)² + 0

ΔE = -(1/2)(m)(5)²

ΔE = Wf

0- (1/2)(m)(5)² = -fk*d

We replace fk = (2.156)*(m )of the equation (1)

-(1/2)(m)(5)²= -(2.156)*(m)*d

We divide by (-m ) both sides of the equation

(1/2)(5)²=  (2.156)*d

12.5=  ( 2.156)*d

d = (12.5) / ( 2.156)

d = 5.8 m

To calculate the distance a skier travels before stopping, we equate the skier's initial kinetic energy to the work done by friction. The force exerted by friction is calculated using the given coefficient of kinetic friction and the skier's weight. The distance traveled can be calculated using this force with the initial speed of the skier.

The problem you've posed can be solved using the work-energy theorem, which states that the work done on an object is equal to the change in its kinetic energy. We can use the principle of conservation of energy here. Initially, the skier has kinetic energy and no potential energy.

When she stops, all her kinetic energy has been transferred into frictional work, hence her kinetic energy becomes 0. Kinetic energy can be defined as (1/2)mv^2 and the work done by friction is force times distance (Fd).

Force exerted by friction (F) can be calculated using the formula F = μN where μ corresponds to the coefficient of kinetic friction given as 0.220 and N is the normal force and in this case, equals to the weight of the skier (assuming the skier is on a horizontal plane).

To find the distance (d) travelled before she comes to a stop, we equate the skier's initial kinetic energy to the work done by friction, giving us (1/2)mv^2 = μmgd. The mass of the skier (m) cancels out, and the distance comes out to be d = v^2/(2μg).

For more such questions on energy, click on:

https://brainly.com/question/16987255

#SPJ6

In an isochoric process, where volume is constant and the gas is cooled, no work is done by the gas. Therefore, the answer is zero.

In the thermodynamics, if a given amount of a gas is maintained at a constant volume and is cooled, the whole process occurs in what is known as an isochoric process. In an isochoric process, the volume is held constant which means the gas does no work because there isn't any volume change. Therefore, work done by the gas in this case is zero, hence, the answer is (c) zero. Work = Change in Internal Energy (ΔU) - Heat (Q)

https://brainly.com/question/35546325

#SPJ12

The volume of the monatomic gas is kept constant. When the volume is constant, the work done by the gas is zero because work is done when there is a change in volume. Therefore, the correct answer to this physics question is c) zero.

Considering the situation, we can note that the volume of the monatomic gas is kept constant. When the volume is constant, the work done by the gas is zero because work is done by a gas when it expands or contracts, which involves a change in volume. The only change occurring here is the cooling of the gas by 50K, that is achieved by removing 400J of energy from the gas, but this does not involve any work done by the gas itself.

Therefore, the correct answer to this physics question is c) zero. This answer can be found using the first law of thermodynamics which states that the change in internal energy of a system is equal to the heat transferred to the system, minus the work done by the system. In this case, there is no work done by the system since the volume is constant.

https://brainly.com/question/32263955

#SPJ11

Answer:

Explanation:

This question can be answered using the equation of continuity. Which is

V = A1v1 = A2v2

where V is the volume flow rate

           A is the cross sectional area of the pipe at that position

           v is the velocity of the flow at that point.

From the equation we can see the volume flow rate does not change even as the area and flow speed change. Which is consistent with the assumptions used in this equation which is that

If the temperature does not change, meaning there is not expansion/contraction and it is incompressible then the volume flow rate does not change.

And the speed will be higher in the pipe with the smaller diameter because area and speed are inversely related.

The flow speed is greatest in the smaller pipe, while the volume flow rate is greatest in the larger pipe.

The flow speed is the greatest in the pipe with the smaller diameter, which is the pipe with a diameter of 3 cm. This can be determined from the continuity equation, which states that the flow speed is inversely proportional to the cross-sectional area. Since the smaller pipe has a smaller cross-sectional area, the flow speed is greater.

On the other hand, the volume flow rate is determined by both the flow speed and the cross-sectional area. The volume flow rate is the greatest in the pipe with the larger diameter, which is the pipe with a diameter of 5 cm. This is because even though the flow speed is slower in the larger pipe, the larger cross-sectional area compensates for it and allows a greater volume of water to flow through.

https://brainly.com/question/33886964

#SPJ3

Answer:

Lone pairs cause bond angles to deviate away from the ideal bond angles

Explanation:

Bonded electrons are stabilized and clustered between the bonding electrons meaning they are much closer together. Non-bonding electrons however are not being shared between any atoms which allows them to roam a little further spreading the charge density over a larger space and therefore interfering with what would be an expected bond angle

The flux of F through the curved surface of the cylinder is [tex]\( 18\pi \).[/tex]  

The flux of the vector field F = xi + yj + zk  through the curved surface of the cylinder [tex]\( x^2 + y^2 = 9 \),[/tex] bounded below by the plane [tex]\( x + y + z = 2 \)[/tex] and above by the plane [tex]\( x + y + z = 4 \),[/tex] and oriented away from the z-axis can be calculated using the surface integral formula.

The flux [tex]\( \Phi \)[/tex]is given by:

[tex]\[ \Phi = \iint_S \mathbf{F} \cdot d\mathbf{S} \][/tex]

Where [tex]\( d\mathbf{S} \)[/tex] is the outward-pointing normal vector to the surface [tex]\( S \).[/tex]

First, let's parameterize the surface. Since the cylinder is described by [tex]\( x^2 + y^2 = 9 \)[/tex], we can use cylindrical coordinates:

[tex]\[ x = 3\cos \theta \]\[ y = 3\sin \theta \]\[ z = z \][/tex]

The normal vector [tex]\( d\mathbf{S} \)[/tex] can be calculated using the cross product of the partial derivatives of [tex]\( \mathbf{r}(\theta, z) = (3\cos \theta, 3\sin \theta, z) \)[/tex] with respect to [tex]\( \theta \) and \( z \):[/tex]

[tex]\[ \frac{\partial \mathbf{r}}{\partial \theta} = (-3\sin \theta, 3\cos \theta, 0) \]\[ \frac{\partial \mathbf{r}}{\partial z} = (0, 0, 1) \][/tex]

Taking the cross product:

[tex]\[ d\mathbf{S} = \left| \frac{\partial \mathbf{r}}{\partial \theta} \times \frac{\partial \mathbf{r}}{\partial z} \right| d\theta dz = 3 \, d\theta dz \][/tex]

Now, calculate F.ds:

[tex]\[ \mathbf{F} \cdot d\mathbf{S} = (3\cos \theta, 3\sin \theta, z) \cdot (0, 0, 3) = 3z \, d\theta dz \][/tex]

The bounds of integration for [tex]\( \theta \) are \( 0 \) to \( 2\pi \)[/tex] since we want to cover the entire curved surface of the cylinder. For [tex]\( z \),[/tex] the bounds are from [tex]\( 2 \) to \( 4 \)[/tex] since the surface is bounded below by [tex]\( x + y + z = 2 \)[/tex] and above by [tex]\( x + y + z = 4 \).[/tex]

Now integrate:

[tex]\[ \Phi = \int_0^{2\pi} \int_2^4 3z \, dz \, d\theta \]\[ \Phi = \int_0^{2\pi} \left[ \frac{3}{2}z^2 \right]_{z=2}^{z=4} \, d\theta \]\[ \Phi = \int_0^{2\pi} \frac{3}{2} \cdot 12 \, d\theta \]\[ \Phi = 18\pi \][/tex]

So, the flux of F through the curved surface of the cylinder is [tex]\( 18\pi \).[/tex]

Complete Question:
Compute the flux of F⃗ =xi⃗ +yj⃗ +zk⃗ through just the curved surface of the cylinder x2+y2=9 bounded below by the plane x+y+z=2, above by the plane x+y+z=4, and oriented away from the z-axis

Answer:

(a) 3224.27 N

(b) 3224.27 N

(c) 2.443 m/s^2

(d) 5.37 x 10^-22 m/s^2

Explanation:

Mass of satellite, m = 1320 kg

mas of earth, M = 6 x 10^24 kg

Radius of earth, r = 6.4 x 10^6 m

(a) The force of gravitation between the earth and the satellite is given by

[tex]F=G\frac{Mm}{d^{2}}[/tex]

where, d is the distance between the two objects

[tex]F=6.67\times10^{-11}\frac{6\times10^{24}\times 1320}{\left (2\times 6.4\times 10^{6}  \right )^{2}}[/tex]

F = 3224.27 N

(b) The force on earth is same as the force on satellite.

F = 3224.27 N

(c) Acceleration of satellite = Force on satellite / mass of satellite

Acceleration of satellite = 3224.27 / 1320 = 2.443 m/s^2

(d) Acceleration of earth = Force on earth / mass of earth

Acceleration of satellite = 3224.27 / (6 x 10^24) = 5.37 x 10^-22 m/s^2

Answer:

Part A:

T=0.096 N m

Part B:

t=11.525≅11.53 seconds

Explanation:

Part A:

In order to find the torque we will use the following formula:

[tex]T=r*F[/tex]

Where T is the torue

r is the radius of bowel

F is the force

[tex]r=\frac{12*10^{-2} }{2} m\\[/tex]

r=0.06 m

[tex]T=0.06*1.6[/tex]

T=0.096 N m

Part B:

In order to find how long would it take for potter wheel to sto we will proceed the following way:

T=I*α

Where:

T is the Torque

I is the moment of inertia

α is the angular acceleration

α=T/I

we will take T from art A

α=0.096/0.11

α=0.872 [tex]rad/s^2[/tex]

α=ω/t

where:

α is the angular accceleration

ω is angular velocity in rad/s

ω=1.6*2ππ

ω=10.05 rad/s

t=ω/α

[tex]t=\frac{10.05}{0.872}[/tex]

t=11.525≅11.53 seconds

It will take 11.53 sec for wheel to stop

The torque exerted by the potter on the wheel is 0.192 Nm. If the only force acting on the wheel is the potter's hand, the wheel will stop in approximately 5.72 seconds.

The question is asking about the concepts of torque, angular velocity, and moment of inertia in a real-life situation involving a potter's wheel. We can solve this problem in two parts.

Torque: Torque (τ) can be calculated using the formula τ = r*F, where r is radius and F is force. In this case, the radius, r = 12 cm = 0.12 m (since we need to convert cm to meters for the SI units.) and F = 1.6 N. So, the torque exerted by the potter can be calculated as τ = 0.12 m * 1.6 N = 0.192 Nm.

Time to stop: If the only torque acting on the wheel is due to the potter's hand, we can use the rotational analog of Newton's second law, τ = I*a, where a is the angular acceleration, I is the moment of inertia and τ is the torque. The angular acceleration can be calculated as a = τ / I = 0.192 Nm / 0.11 kg*m^2 = 1.75 rad/s^2. The time it takes to stop the wheel can then be calculated using the formula t = (final velocity - initial velocity) / angular acceleration. As the final angular velocity (when the wheel stops) is 0, and the initial angular velocity is 1.6 rev/s = 1.6 * 2π rad/s (as 1 rev/s = 2π rad/s), the time to stop the wheel, t = (0 - 1.6*2π rad/s) / 1.75 rad/s^2, t = approximately 5.72 seconds, assuming that the only force acting on the potter's wheel is the hand of the potter.

https://brainly.com/question/967455

#SPJ11

Answer:

the kind of radiations of the devices monitor are gamma, X-Rays and beta particles.

Explanation:

Film badges, which is usually worn in the front body, is a device to monitor the exposure of the radiation. This device measures the the exposure of X-Rays, Gamma Rays and beta Particles. This device is able to differentiate the energy of photon and is considerably accurate for the exposure greater than 100 millirem. However, under 20 milllirem, the device is less accurate for gamma rays.

Answer:

negative, positive

Explanation:

A we know that the electrons have a negative charge.

So, when a body has some excess electrons, it means it has negative charge.

When a body has an deficiency of eletrons, it means it gains a positive charge.

An area with excess electrons has a net _negative__ charge; an area with a deficit of electrons has a net _Positive____ charge.

Answer:

The recoil velocity is 0.2687 m/s.

Explanation:

∵ The person is sitting on an icy surface , we can assume that the surface is frictionless.

∴ There is no force acting acting on the person and book as a system in horizontal direction.

Hence , momentum is conserved for this system in horizontal direction of motion.

If 'i' and 'f' be the initial and final states of this system , then by principle of conservation of momentum(p)  -

[tex]p_{i}[/tex]=[tex]p_{f}[/tex]

System initially is at rest

∴[tex]p_{i}[/tex]=0

∴ From the above 2 equations

[tex]p_{f}[/tex]=0

We know that ,

Momentum(p)=Mass of the body(m)×velocity of the body(v)

Let [tex]m_{1}[/tex] and [tex]m_{2}[/tex] be the mass of the person and the book respectively and [tex]v_{1}[/tex] and [tex]v_{2}[/tex] be the final velocities of the person and book respectively.

∴[tex]p_{f}[/tex]=[tex]m_{1}[/tex][tex]v_{1}[/tex]+[tex]m_{2}[/tex][tex]v_{2}[/tex]=0

From the question ,

[tex]m_{1}[/tex] = 74.9 kg

[tex]m_{2}[/tex] = 2.44 kg

[tex]v_{2}[/tex] = 8.25 m/s

Substituting these values in the above equation we get ,

(74.9 × [tex]v_{1}[/tex] )+ (2.44×8.25) = 0

∴[tex]v_{1}[/tex]  = - 0.2687 m/s (Negative sign suggests that the motion of  the person is opposite to that of the book)

∴ The recoil velocity is 0.2687 m/s.

Answer:

[tex]F_n = mg - \frac{mv^2}{R}[/tex]

Explanation:

As we know that when an object moves in a circle with uniform speed then the force required by the object in moving the circular path is known as centripetal force.

This force is always towards the center of the circle and points towards it

This force is the sum of all forces towards the center

so we have

[tex]mg - F-n = F_c[/tex]

[tex]F_c = \frac{mv^2}{R}[/tex]

so we have

[tex]mg - F_n = \frac{mv^2}{R}[/tex]

[tex]F_n = mg - \frac{mv^2}{R}[/tex]

Compared to the pucks given, the pair of pucks will rotate at the same rate.

Answer: Option A

Explanation:

The law of conservation of the angular momentum expresses that when no outer torque follows upon an article, no difference in angular momentum will happen.  At the point when an item is turning in a shut framework and no outside torques are applied to it, it will have no change in angular momentum.

The conservation of the angular momentum clarifies the angular quickening of an ice skater as she brings her arms and legs near the vertical rotate of revolution.  In the event, that the net torque is zero, at that point angular momentum is steady or saved.  

By twice the mass yet keeping the speeds unaltered, also twice the angular momentum's to the two-puck framework.  Be that as it may, we likewise double the moment of inertia. Since [tex]L=I \times \omega[/tex], the turning rate of the two-puck framework must stay unaltered.

Final answer:

To calculate the monthly cost of electricity for a portable TV, convert the power to kilowatts, multiply by daily usage, then by the number of days in a month, and finally by the cost per kWh. The monthly bill for a 75 W TV used 6 hours a day at a rate of $0.3/kWh is $4.05.

Explanation:

Calculating Monthly Cost of Electricity for a Portable TV

First, we need to convert the power consumed by the TV from watts to kilowatts (kW):

75 W = 0.075 kW

Next, we calculate the energy used each day by multiplying the power consumption (in kW) by the time the TV is on (in hours):

Daily energy consumption = 0.075 kW × 6 h/day = 0.45 kWh/day

To find the monthly energy consumption, we multiply the daily consumption by 30 days:

Monthly energy consumption = 0.45 kWh/day × 30 days = 13.5 kWh/month

Finally, to calculate the monthly bill, we multiply the monthly energy consumption by the cost of electricity (in dollars per kWh):

Monthly bill = 13.5 kWh/month × $0.3/kWh = $4.05/month

The student's monthly electric bill for the portable TV would be $4.05.

Answer:

Mutual inductance will be [tex]M=1.8\times 10^{-3}Hennry[/tex]

Explanation:

We have given induced current [tex]\Delta i=5A[/tex]

Time is given as [tex]t=1ms=10^{-3}sec[/tex]

We have to find the mutual inductance between the coils

Induced emf is given as e = 9 volt

We know that induced emf is given by

[tex]e=M\frac{\Delta i}{\Delta t}[/tex]

[tex]9=M\times \frac{5}{10^{-3}}[/tex]

[tex]M=1.8\times 10^{-3}Hennry[/tex]

The statement is correct. Recrystallization refers to any chemical, physical, or biological changes that occur after sediments are deposited, whereas burial and lithification occur when unconsolidated sediments become sedimentary rocks.

To learn more about sedimentary rocks, refer to:

https://brainly.com/question/1598317

#SPJ2

Answer:

498.67 seconds, wich is 8.31 minutes

Explanation:

We can calculate it because we know the distance between the sun and the earth, and the speed at which light travels.

The distance from the sun to the earth is:

[tex]d=149.6 x10^9m[/tex]

and the speed of light:

[tex]v=3x10^8m/s[/tex]

this the tie it takes for light of the sun to reach earth can be calculated by the next equation:

[tex]t=\frac{d}{v}[/tex]

Substituting the v and d values:

[tex]t=\frac{149.6 x10^9m}{3x10^8m/s}=498.67s[/tex]

This is the anwer: 498.67s

if we want it in minutes we just divide by 60:

[tex]498.67s/60=8.31 minutes[/tex]

The spring constant is 181.0 N/m

Explanation:

We can solve the problem by applying the law of conservation of energy. In fact, the elastic potential energy initially stored in the compressed spring is completely converted into gravitational potential energy of the dart when the dart is at its maximum height. Therefore, we can write:

[tex]\frac{1}{2}kx^2 = mgh[/tex]

where the term on the left represents the elastic potential energy of the spring while the term on the right is the gravitational potential energy of the dart at maximum height, and where

k is the spring constant of the spring

x = 2.08 cm = 0.0208 m is the compression of the spring

m = 12.3 g = 0.00123 kg is the mass of the dart

[tex]g=9.8 m/s^2[/tex] is the acceleration due to gravity

h = 3.25 m is the maximum height of the dart

Solving for k, we find:

[tex]k=\frac{2mgh}{x^2}=\frac{2(0.00123)(9.8)(3.25)}{(0.0208)^2}=181.0 N/m[/tex]

Learn more about potential energy:

brainly.com/question/1198647

brainly.com/question/10770261

#LearnwithBrainly

Answer:

They would be the same

Explanation:

Since there's no external force, or the external net force acting on the satellite is 0. By the law of conservation of momentum, the momentum before and after the explosion must be the same.

Even if the satellite is stationary prior to the explosion, its momentum is 0. After explosion it sends many of its pieces in all direction with different non 0 momentum. The total momentum by account of their direction would sum up to be 0.

Final answer:

The linear momentum of the satellite before the explosion is equal to the total linear momentum of all the pieces after the explosion.

Explanation:

The linear momentum of the satellite before the explosion is equal to the total linear momentum of all the pieces after the explosion. This is because linear momentum is conserved in an explosion. Although the distribution of momentum among the individual pieces may change, the total momentum remains the same. In this case, when the satellite explodes, the momentum of the satellite is redistributed among the thousands of pieces that are scattered in all directions.

Answer: D. 40,000Joules

Explanation:

Heat capacity is defined as the heat required to change the state of a substance.

Simce the substance in question is a block of ice (solid), the heat needed to cause it to melt is Latent heat H = mL

m is the mass of the substance

L is the latent heat of fusion of water

H= 1 × 334,000

= 334,000Joules

Heat required to raise the temperature of the water to 10°C

Q = mCƦ

where C is specific heat capacity of water and Ʀ is change in temperature

Q = 1 × 4000 ×(10-0)

Q= 40,000Joules

Since the block already melts, the heat required will just be

40,000Joules (D)

Final answer:

To raise the temperature of 1 kg of melted ice water to 10°C, the heat energy required is calculated using the specific heat capacity of water (4,000 J/kg-°C) and the formula Q = mcΔT, resulting in 40,000 J.

Explanation:

The question is asking about the amount of heat energy required to raise the temperature of 1 kg of water (from melted ice) to 10 °C. After the ice melts, the water at 0 °C needs to be heated to 10 °C. Using the specific heat capacity of water, which is 4,000 J/kg-°C for this calculation, we can find the amount of energy needed with the formula:

Q = mcΔT

where Q is the heat energy, m is the mass of the water, c is the specific heat capacity, and ΔT is the change in temperature. Plugging in the values:

Q = (1 kg)(4,000 J/kg-°C)(10 °C - 0 °C)

Q = (1 kg)(4,000 J/kg-°C)(10 °C)

Q = 40,000 J

Therefore, the correct answer is D. 40,000 J.

Answer:

a)TE=0.0245 J

b)A = 0.0128 m

c)V=0.57 m/s

Explanation:

Given that

m = 0.150 kg

K= 300 N/m

x= 0.012 ,v= 0.2 m/s

The velocity of the toy at any point given as

[tex]v=\omega\sqrt{A^2-x^2}[/tex]

[tex]\omega=\sqrt{\dfrac{K}{m}}[/tex]

[tex]v=\sqrt{\dfrac{K}{m}}\times \sqrt{A^2-x^2}[/tex]

[tex]0.2=\sqrt{\dfrac{300}{0.15}}\times \sqrt{A^2-0.012^2}[/tex]

2 x 10⁻⁵ = A² - 0.000144

A=0.0128 m

Amplitude ,A = 0.0128 m

The total energy TE

[tex]TE=\dfrac{1}{2}KA^2[/tex]

[tex]TE=\dfrac{1}{2}300\times 0.0128^2[/tex]

TE=0.0245 J

The maximum speed

[tex]V=\omega A[/tex]

[tex]V=\sqrt{\dfrac{K}{m}}\times A[/tex]

[tex]V=\sqrt{\dfrac{300}{0.15}}\times 0.0128[/tex]

V=0.57 m/s

(a) The total energy of the toy is 0.0246 J (b) The amplitude of its motion is 0.0128 m (c) The maximum speed it can attain is 0.573 m/s.

To solve the given problem involving a toy undergoing simple harmonic motion (SHM) on a horizontal spring, let's go step-by-step:

(a) The total energy (E) in SHM is the sum of kinetic energy (KE) and potential energy (PE) at any point.

Given the mass (m) is 0.150 kg, spring constant (k) is 300.0 N/m, displacement (x) is 0.0120 m, and speed (v) is 0.200 m/s, we calculate:

Kinetic Energy: [tex]KE = (\frac{1}{2})mv^2 = (\frac{1}{2})(0.150 kg)(0.200 m/s)^2[/tex] = 0.003 J

Potential Energy:[tex]PE = (\frac{1}{2})kx^2 = (\frac{1}{2})(300.0 N/m)(0.0120 m)^2[/tex] = 0.0216 J

Total Energy: E = KE + PE = 0.003 J + 0.0216 J = 0.0246 J

Amplitude: The total energy in SHM is also equal to the potential energy at maximum displacement (amplitude A). Therefore, using [tex]E = (\frac{1}{2})kA^2[/tex], we solve for A:

[tex]0.0246 J = (\frac{1}{2})(300.0 N/m)A^2[/tex]

[tex]A^2 = (\frac{0.0246 J}{150 N/m}) = 0.000164 m^2[/tex]

[tex]A = \sqrt{0.000164 m^2} = 0.0128 m[/tex]

(b) Maximum Speed: The maximum speed (vm)) occurs at the equilibrium position.

Using [tex]E = (\frac{1}{2})mv^2_m[/tex], we solve for vm:

[tex]0.0246 J = (\frac{1}{2})(0.150 kg)v^2_max[/tex]

[tex]v^2_m = (\frac{0.0246 J}{0.075 kg}) = 0.328 m^2/s^2[/tex]

[tex]v_m = \sqrt{0.328 m^2/s^2} = 0.573 m/s[/tex]

Therefore, the total energy of the system is 0.0246 J, the amplitude of oscillation is 0.0128 m, and the maximum speed is 0.573 m/s.

Answer:7.16 cm/min or 0.0716 min.

Explanation:

From the equation the parameters given are; rate= 14m^-3/min, height of the pile,h= 3/8, rate when the pile is 5m high= ??.

d= diameter, r= radius. From the definition of diameter, diameter, d=2× radius, r(that is, 2r)

h= 3/8×d = 3/8(2r)= 3/4 × r

r= 4/3 × h

V= 1/3×πr^2×h ---------------------(1).

V= 1/3×π×[4/3h]^2×h

V= 16/27×π×h^3

Differentiate dV with respect to time, t;

dV/dt= 3(16)/27 × π ×h^2 ×dh/dt.

dV/dt = 16/9×π×h^2 × dh/dt

Then we differentiate V implicitly with respect to time,t

14=16/9×π[5]^2×dh/dt

dh/dt = 10× 9/400π

dh/dt= 45/200π (m/min)

dh/dt= 0.0716 m/min.

Conversion to cm/min

= dh/dt= 4500/200π (cm/min)

dh/dt= 1125/50π

dh/dt= 7.16 cm/min.

To find the speed at the edge of the storm, we divide the distance by the time.

To find how fast the height and radius are changing when the pile is 5 m high, we need to find the rates of change of both the height and radius at that height.

Let's start by finding the rate of change of the height. We know that the height is always three-eighths of the base diameter, so the base diameter is twice the height. Therefore, when the height is 5 m, the base diameter is 2 * 5 = 10 m.

Now, we can use the information about the rate of sand falling from the conveyor belt to find the rate of change of the radius. The volume of a cone is given by the formula V = (1/3) * π * r^2 * h, where V is the volume, π is a constant (approximately 3.14), r is the radius, and h is the height. The rate of change of the volume with respect to time can be found using the chain rule.

https://brainly.com/question/31226174

#SPJ3

a) The mass of the ship is [tex]1.2\cdot 10^8 kg[/tex]

b) The ship has a larger momentum than the shell

Explanation:

a)

The momentum of an object is given by:

[tex]p=mv[/tex]

where

m is the mass of the object

v is its velocity

For the ship in this problem, we have

[tex]p=1.60\cdot 10^9 kg m/s[/tex] is the momentum

[tex]v=48.0 km/h \cdot \frac{1000 m/km}{3600 s/h}=13.3 m/s[/tex] is the velocity

Solving for m, we find the mass of the ship:

[tex]m=\frac{p}{v}=\frac{1.60\cdot 10^9}{13.3}=1.2\cdot 10^8 kg[/tex]

b)

The momentum of the artillery shell is given by

[tex]p=mv[/tex]

where

m is its mass

v is its velocity

For the shell in this problem,

m = 1100 kg

v = 1200 m/s

Substituting,

[tex]p=(1100)(1200)=1.32\cdot 10^6 kg m/s[/tex]

So, we see that the ship has a larger momentum.

Learn more about momentum:

brainly.com/question/7973509

brainly.com/question/6573742

brainly.com/question/2370982

brainly.com/question/9484203

#LearnwithBrainly

Momentum is the product of force and velocity. The mass of the ship and the momentum of the fired artillery is [tex] 1.2 \times 10^{8}[/tex] and [tex]1.32 \times 10^{6} kgm/s [/tex] respectively

Momentum = mass × velocity

Mass of the ship = momentum / velocity

Mass of ship = [tex]\frac{1.60 \times 10^{9}}{13.33} = 1.2 \times 10^{8}[/tex]

2.)

Momentum of fired artillery = 1100 × 1200 = [tex]1.32 \times 10^{6} kgm/s [/tex]

Therefore, the momentum of fired artillery is [tex]1.32 \times 10^{6} kgm/s [/tex]

Learn more : https://brainly.com/question/14254277

Answer:

Stoma represents the interface between the environment and the plant, helping to obtain the necessary CO2.

Explanation:

Stoma are groups of two or more specialized epidermal cells whose function is to regulate gas exchange and perspiration.

The frequency or density varies widely from a few tens to thousands per mm2, due to the influence of environmental factors, leaf morphology and genetic composition.

Answer: linear velocity = 169,745.2mi/hr

Explanation:

Given: radius of orbit= 2,600,000mi

Time taken for orbit = 4.01 days = 4.01 × 24 hrs= 96.24hrs

Linear velocity = distance travelled/time

distance travelled = circumference of orbit = 2πr

= 2π × 2,600,000mi

= 16336281.8mi

Linear velocity = 16336281.8/ 96.24hrs

= 169745.2mi/hr