The moon most likely formed
A. From a collision of Earth with a Mars-sized object.
B. In another region of space and drifted toward Earth.
C. From material in the solar system that came together.
D. In the same way as Earth formed.
You can see a clock in a spaceship moving past you at 90 percent of the speed of light. according to you, how much time would pass while the clock in the spaceship ticked through one minute?
A sound wave of frequency 440 hz travels at a speed of 344m/s through the air in a concert hall. how fast would a note one octave higher, 880hz travel through the same concert hall?
Which prefix is needed when naming SO3? A. tri- B. penta- C. mono- D. di-
Answer:
A). tri-
Explanation:
As we know that here in the given compound we have one sulfur and three oxygen atoms.
So here in this nomenclature we can say that
one = mono
two = di
three = tri
five = penta
so above are the different prefix which we will use in different cases when atoms are arranged in different numbers.
Since we have three atoms here for oxygen so the prefix must be "tri" here in this case
if energy is absorbed because of a chemical reaction the reaction is ____. a product, exothermic, limiting, endothermic.
If energy is absorbed because of a chemical reaction the reaction is Endothermic.
Answer: Option D
Explanation:
There are two types of chemical reaction depending upon whether the energy is absorbed or released to the surroundings. When the energy is absorbed in a reaction from the surroundings it is called as an endothermic reaction and the temperature of the surroundings gets affected.
When the opposite reaction occurs in the surroundings, it is called as an exothermic reaction. Option A and B are irrelevant to the situation here. So if the energy is absorbed because of a chemical reaction then the reaction is said to be endothermic.
Velocity is the change of speed and/or direction of An object true or false
The difference in potential between the cathode and anode of a spark plug is 14700 v. what energy does the electron give up as it passes between the electrodes? answer in units of j.
1. How will the ice water mix with the salty water? Write your hypothesis below.
Answer: If the ice is mixed in with the salty water then, the ice will melt slower
Explanation:
The application of salt actually causes ice to melt because a solution of water as well as disbanded salt has a lower freezing point than pure water.
What is freezing point?The temperature at which water freezes is referred to as the freezing point. When discussing the weather, the term "freezing point" is frequently used.
Throughout the day, the temperature remained below freezing. A substance's freezing point is the temperature at which it freezes.
A melting point is the temperature at which a solid transforms into a liquid under normal atmospheric pressure.
Melting is actually slowed in a salty liquid because the cold melted water sits on top of the denser salty water. This prevents heat from rapidly reaching the ice.
The implementation of salt causes severe ice to melt because a solution of water and dissolved salt does have a lower freezing point than distilled water.
When ice comes into contact with salty water, it melts, releasing more liquid water, which dissolves more salt, causing more ice to melt, and so on.
Thus, this way salt acts on the ice.
For more details regarding freezing point, visit:
https://brainly.com/question/3121416
#SPJ2
According to lenz's law, the magnetic field of an induced current in a conductor will
Lenz's law states that the magnetic field produced by an induced current in a conductor opposes the change in the external magnetic field that caused the induced current. This behavior is a consequence of energy conservation and serves to maintain a constant magnetic flux through the conductor.
Lenz's Law and Induced Current
According to Lenz's law, the magnetic field of an induced current in a conductor will oppose the change that induced it. When the magnetic flux through a conductor changes, it induces an electromotive force (emf) and, consequently, a current in the conductor.
This induced current generates its own magnetic field. The direction of this induced magnetic field is such that it opposes the change in the external magnetic field that caused the induction. For instance, if the magnetic field within a loop is increasing, the induced current will flow in a direction that creates a magnetic field opposing the increase, preserving the magnetic flux.
If the original magnetic field is decreasing, the induced current will produce a magnetic field that reinforces the original field, again opposing the decrease in flux. This opposition is part of the conservation of energy, ensuring that the system does not create or destroy energy, thus preventing a perpetual motion scenario. Overall, Lenz's Law is a manifestation of the conservation laws in electromagnetism.
Can someone explain to me #4.
How many coulombs of charge are needed to produce 29.1 mol of solid zinc?
To produce 29.1 mol of solid zinc, approximately 2801443.5 Coulombs of charge are needed.
Explanation:To calculate the number of coulombs of charge needed to produce 29.1 mol of solid zinc, we need to use Faraday's constant, which is approximately 96485 C/mol.
Charge (in coulombs) = Faraday's constant x number of moles of substance
In this case, Charge = 96485 C/mol x 29.1 mol = 2801443.5 C.
Learn more about Coulombs of charge for producing solid zinc here:https://brainly.com/question/31440253
#SPJ3
Carter pushes a bag full of basketball jerseys across the gym floor. The bag weighs 21 newtons. If he pushes the bag 9 meters in 3 seconds, how much power does he use? (Hint: 1 watt = 1 .)
Which property of matter allows convection currents to form? Fluids rise if they are less dense than the matter around them. The molecules in solids do not vibrate very quickly. Electromagnetic waves carry energy. Liquids take the shape of their container.
A humming bird feeder is tied by a rope to a tree branch. You notice that in a gentle breeze, the feeder moves back and forth 15 times in 1 minute. How long is the rope?
In Milgram's experiment:
A. the "learner" sometimes had lasting injuries.
B. two-thirds of people refused to participate.
C. almost no one went to 450 volts.
D. almost two-thirds of participants went all the way to 450 volts.
In Milgram's experiment: Almost two-thirds of participants went all the way to 450 volts. (option D)
What is Milgram's experiment?In Milgram's experiment on obedience, participants were instructed to administer electric shocks to a "learner" (a confederate) whenever they answered questions incorrectly.
Contrary to expectations, almost two-thirds of the participants continued to administer shocks up to the maximum voltage of 450 volts, despite the learner's apparent distress.
This shocking result revealed the extent to which people can follow authority figures, even when it involves causing harm to others, highlighting the power of social influence and obedience.
learn more about Milgram's experiment from
https://brainly.com/question/9791509
#SPJ3
Which property of an optical telescope is associated with sharper images?
a proton is moving horizontally at 7.9 x 10^5 m/s. It passes through a vertical magnetic field that points downward. In which direction is the proton deflected by the magnetic field? A. up B. to the right of its velocity C. down D. to the left of its velocity
the atomic mass is important because?
a. it tells you the size of the atom
b.it tells you the number of electrons
If the spectrum of a star is blue shifted, which way is the star moving?
How much energy from the sun actually reaches the corn answer?
Answer:
It depends upon the sunlight intensity known as ALBEDO, the amount of energy used by photosynthesis and the chemical composition of corn.
Explanation:
Albedo is a measure of the amount of light reflected from an object. Albedo is normally expressed as a decimal value representing the percentage of light reflected.
Photosynthesis, a biological process, uses the energy of sunlight to manufacture sugar, which serves as the universal food for life. Oxygen produced as a product of photosynthesis is released into the environment.
The formula for this reaction is:
6CO2 + 6H2O + sunlight energy → C6H12O6 + 6O2
• where CO2 represents carbon dioxide
• H2O represents water
• C6H12O6 represents the sugar molecules (carbohydrate)
• and O2 represents oxygen
What is a half circle that extends from the north pole to the south pole?
Sully is riding a snowmobile on a flat, snow-covered surface with a constant velocity of 10 meters/second. The total mass of the snowmobile, including Sully, is 280 kilograms. If Sully accelerates to a velocity of 16 meters/second over 10 seconds, what’s the force exerted by the snowmobile to accelerate? Use F = ma, where . 160 N 168 N 248 N 280 N 324 N
Four beats per second are heard when an unknown tuning fork and a 240 Hz tuning fork are struck simultaneously. This same unknown tuning fork and a 250 Hz tuning fork are struck. Six beats are heard. Its exact frequency?
The energy gained by electrons as they are accelerated by an electric field is
a person standing in the ocean notices that after a wave crest passes by ten more crest pass in a time of 120s what is the frequency
What is the intensity of sound waves produced by a trumpet at a distance of 1.6 m when the power output of the trumpet is 0.30 w?
The intensity of the sound waves at a distance of 1.6 meters from the trumpet is approximately[tex]\( 9.325 \times 10^{-3} \)[/tex] watts per square meter.
The intensity of the sound waves produced by the trumpet at a distance of 1.6 meters is given by the formula:
[tex]\[ I = \frac{P}{A} \][/tex]
The area of a sphere is given by [tex]\( A = 4\pi r^2 \)[/tex], where r is the radius of the sphere.
Given:
- Power output of the trumpet, [tex]\( P = 0.30 \)[/tex] watts
- Distance from the trumpet, [tex]\( r = 1.6 \)[/tex] meters
First, we calculate the area A through which the sound waves are spreading at a distance of 1.6 meters:
[tex]\[ A = 4\pi r^2 = 4\pi (1.6)^2 \][/tex]
[tex]\[ A = 4\pi (2.56) \][/tex]
[tex]\[ A = 4\pi \times 2.56 \][/tex]
[tex]\[ A \ = 4 \times 3.14159 \times 2.56 \][/tex]
[tex]\[ A \ = 32.17 \][/tex]
Now, we calculate the intensity I:
[tex]\[ I = \frac{P}{A} \][/tex]
[tex]\[ I = \frac{0.30}{32.17} \][/tex]
[tex]\[ I \ = \frac{0.30}{32.17} \][/tex]
[tex]\[ I \ = 0.009325 \][/tex]
[tex]\[ I \ = 9.325 \times 10^{-3} \][/tex]
What is the biggest star in our solar system?
which direction will the magnetometer read for earth’s magnetic field when the satellite passes over earths equator ?
A magnetometer over the Earth's equator will detect Earth's magnetic field as a horizontal line pointing northward. As one moves west along the equator, the detected orientation of the magnetic field by the magnetometer remains constant due to the parallel nature of the magnetic field lines at this latitude.
Explanation:When a satellite equipped with a magnetometer passes directly over the Earth's equator, the primary direction the magnetometer will read for the Earth's magnetic field is horizontal and points towards the magnetic north pole. Since we are assuming the Earth's magnetic north is aligned with the geographic north pole, the magnetometer reading will be directed northward, perpendicular to the equator.
As the student or satellite moves west along the equator, the orientation of the magnetic field detected by the compass or magnetometer would not significantly change. This is because at the equator, the Earth's magnetic field lines are parallel to the Earth's surface, resulting in a compass needle aligning horizontally and pointing towards the north pole. Even while travelling, this horizontal alignment remains constant all along the equator.
Remember, magnetic field lines around a magnetic source, like Earth, follow a path from the magnetic north pole to the magnetic south pole. Also, a compass needle aligns itself with the local magnetic field lines. At the equator, these lines are parallel to the ground, dictating the needle's orientation.
Which of the following is the correct formula for calculating power
A. P= F/W
B. P= W x F
C. P= t x F
D. W/t
What does this graph show about the relationship between mass and acceleration? As acceleration increases, mass increases. As acceleration increases, mass is unaffected. As mass is unaffected, acceleration decreases. As mass increases, acceleration decreases.