Which of the following statements is true about a current-carrying wire in a magnetic field? @Somy
A. Reversing the current direction will cause the force deflecting the wire to be parallel to the magnetic field.

B. Reversing the current direction will cause the force deflecting the wire to be perpendicular to the magnetic field but in the opposite direction.

C. Reversing the current direction will not affect the force deflecting the wire.

Answers

Answer 1
B. Reversing the current direction will cause the force deflecting the wire to be perpendicular to the magnetic field but in the opposite direction.

Related Questions

The energy emitted from the sun is a product of ________.

Answers

Q. The energy emitted from the sun is a product of ________.

A. Fusion

Bob read data from the projectile motion lab graph shown and determined that the drop time was inversely proportional to the horizontal velocity. Which of the following statements is true?

Bob's conclusion was wrong because the x-axis scale is exaggerated.

Bob's conclusion was right because the data points were connected.

Bob's conclusion was wrong because the y-axis scale is exaggerated.

Bob's conclusion was right because the x-axis scale is exaggerated.,

Answers

When he determined that the drop time was inversely proportional to the horizontal velocity, the answer for it would be Bob's conclusion was right because the data points were connected.  The connection of the x and y axis varied  because it is inversely proportional.

the two main currents that affect the united states on the eat coast and west coast

Answers

The California current on the west coast which runs from north to south and the Gulf Stream on the East coast which runs from south to north.

Answer: The California Current and the Gulf Stream.

Explanation:The Gulf Stream is on the East coast it runs southward to northward While The California Current which is also a part of the North Pacific Gyre moves southward along the westward coast if America and ends off at the southward Baja California peninsula.

The California Current is a Pacific Ocean current.

Other Currents in America are Humboldt Current, the Canary Current, the Benguela Current, and the Somali Current.

What electron current is driven through a 2.3-mm-diameter iron wire by a 0.063 v/m electric field?

Answers

Final answer:

To calculate the electron current driven through the iron wire, we need to find the drift velocity and the number of free electrons per cubic meter. By using the formula I = nqAvd, we can calculate the current.

Explanation:

The electron current driven through the iron wire can be calculated using the formula I = nqAvd. Given that the electric field is 0.063 V/m, we need to calculate two quantities: the drift velocity (vd) and the number of free electrons per cubic meter(n). We can then substitute these values into the equation to find the current (I).

To calculate the drift velocity (vd), we need to calculate the number of free electrons per cubic meter (n). We can use the density of iron (8.80 × 10³ kg/m³) and the atomic mass of iron (63.54 g/mol) along with Avogadro's number (6.02 × 10²³ atoms/mol) to determine n.

Finally, substituting the values of n, q, A, and vd into the equation I = nqAvd, we can calculate the electron current driven through the iron wire.

Learn more about Electric Current here:

https://brainly.com/question/31802294

#SPJ12

A 9.0 cm object is 3.0 cm from a lens, which has a focal length of –12.0 cm.

Answers

The question is missing, but I guess the problem is asking for the distance and the size of the image.

Let's find the distance first, by using the lens equation:
[tex] \frac{1}{f}= \frac{1}{d_o}+ \frac{1}{d_i} [/tex]
where f is the focal length, [tex]d_o[/tex] the distance of the object from the lens, [tex]d_i[/tex] the distance of the image from the lens. Using [tex]f=-12.0 cm[/tex] and [tex]d_o=3.0 cm[/tex], we find
[tex]- \frac{1}{12}= \frac{1}{3}+ \frac{1}{d_i} [/tex]
[tex]d_i=- \frac{12}{5}=-2.4 cm [/tex]
where the negative sign means the image is virtual, so located in front of the lens.

Now we can find the size of the image, using the relationship:
[tex] \frac{h_i}{h_o} =- \frac{d_i}{d_o} [/tex]
where [tex] h_i[/tex] and [tex] h_o[/tex] are the size of the image and of the object, respectively.
By using [tex] h_o=9.0 cm[/tex], we can find [tex] h_i[/tex], the size of the image:
[tex] h_i=-h_o \frac{d_i}{d_o}=-(9.0 cm) \frac{(-2.4 cm)}{3.0 cm}=7.2 cm [/tex]
where the positive sign means the image is upright.
The correct answers should be -2.4, 7.2, concave in that order

The closeness of measured values to an accepted value is the BLANK of the data ?

Answers

Answer: accuracy

Justification:

Any measure of a physical data is subject to errors. The errors can be of different kind.

The closer is a measure to the real or accepted value the more accurate the measure is.

For example, if you measure the length of a sheet of paper letter size and you know that the accepted value is 11 inches, then you can tell how accurate your measure is comparing with 11 inches.

Many times the measure is affected by the accuracy of the instrument used (the divisions), but it is also subject to human errors, and may be errors due to the method of measuring.

Homeowners will typically have their heaters set for about 140 degrees F. What is that temperature in C.

Answers

It would be 60 degrees Celsius:)

To convert 140 degrees Fahrenheit to Celsius, subtract 32 from the Fahrenheit temperature and multiply the result by 5/9, resulting in 60 degrees Celsius.

To convert a temperature from Fahrenheit to Celsius, we can use the formula: C = (F - 32) × 5/9, where F is the temperature in degrees Fahrenheit and C is the temperature in degrees Celsius. So, for a heater set to 140 degrees Fahrenheit, the conversion to Celsius would be:

C = (140 - 32) × 5/9

C = (108) × 5/9

C = 60

Therefore, 140 degrees Fahrenheit is equal to 60 degrees Celsius. This knowledge is essential when discussing the power needed to keep a house warm, as energy requirements are usually given in watts per degree Celsius (W/°C).

Andesitic rocks have mineral compositions between those of ____ and basaltic rocks.

a. conglomerate

c. granitic

b. metamorphic

d. organic

Answers

The answer is C, granitic.
Answer:

The answer is Granitic rock

Explanation:

Granite is a light-colored igneous rock with pieces that are large enough to be visible with the naked eye. It is formed from the slow crystallization of magma below Earth's surface which we call as lava. Granite is composed mainly of quartz and feldspar with very small amounts of mica, amphiboles, and other minerals. If we talk about Andesitic rocks, they contain mineral compositions between those of granite and basaltic rocks.


The sound intensity of street traffic is about 107 times greater than the threshold of hearing. what is the relative intensity of street traffic? use the formula

Answers

From the information, the sound intensity of street traffic is about 10^7 greater than the threshold of hearing.
Therefore; if the threshold of hearing is 1 then the street traffic is 10^7 times greater. Sound intensity is the sound power per unit area (W/m²), a sound energy quantity, the SI units are Watts/square meter. Sound intensity level in decibels is ten times the logarithm of the ratio of the sound intensity to the reference sound intensity of 1 pico watt/m²
Hence; the intensity level is LI = 10 × log (10 ^7)/1) dB
                  = 70 dB greater than the threshold of hearing at 0 dB
 Thus the relative intensity of street traffic is 70 decibels. 

Which statement describes what most likely occurs when a compass is placed next to a simple circuit made from a battery, a light bulb, and a wire?

A. A magnetic field created by the compass increases the current in the electrical circuit.
B. A magnetic field created by the compass causes the light bulb to stop working.
C. A magnetic field created by the electric current places negative charges on the compass.
D. A magnetic field created by the electric current causes the compass needle to move.

Answers

When a compass is placed next to a simple circuit made from a
battery, a light bulb, and a wire, the magnetic field created by the
electric current in the wire causes the compass needle to move. (D)

In this circuit A magnetic field created by the electric current causes the compass needle to move. hence option D is correct.

Faraday's law of induction ?

Faraday's law states that "change in a magnetic field produces electric field in the circuit". It can also be stated as " when magnetic flux linked to a circuit changes, an electromotive force is induced in the circuit which is proportional to the rate of change of the flux".

If the wire shown in the circuit is non coated with insulated material. Current flowing through the circuit produces magnetic field around it. This produced magnetic field affects the magnetic field of middle of the compass. Created magnetic field of wire attract needle due to its magnetic field, as a result needle moves.

Hence option D is correct.

To know more about magnetic field click :

https://brainly.com/question/14848188

#SPJ2.

Know the characteristics of a solid, liquid, gas, plasma. (Definite shape/ volume?)

Answers

solids-are molecules that are together at all times( unless changed by a liquid or gas)

liquid-are molecules that move around freely in 1 space but can be changed to solid or gas

gas- molecules that move around freely and can be hot or cold depending

plasma- a material that goes to forming a cell or a liquid without any structual particles
There you go!

A dog travels north for 18 meters, east for 8 meters, South for 27 meters and then west for 8 meters. What is the distance the dog traveled and what is the displacement of the dog.

Answers

Answer:

Distance = 18 +8+ 27+8 =61

Displacement 27 - 18 = 9

Explanation:

I need help with 2 questions . Please help c:

1 . According to the nebular theory, the solar system formed from ?

accretion of protoplanets.
a large, thin cloud of dust and gas.
colliding planetesimals.
all of the above

2. Which of the following statements explains why the terrestrial planets are small and rocky instead of large and less dense like the gas giants?

The inner planets were exposed to much higher temperatures.
Ice-forming compounds vaporize at high temperatures.
Rock-forming materials can condense at high temperatures.
all of the above

Answers

a) According to the nebular theory, the Solar System formed from a huge gaseous nebula which at a certain point was perturbated. Atoms and molecules started colliding, forming planetesimals (a sort of big rocks). The planetesimals were attracted to each other by gravity, forming bigger warm almost spherical objects called protoplanets, which at the end cooled down forming planets.
Therefore the correct answer is "all of the above".

b) The planets closer to the Sun were (and still are) subject to higher temperatures, due to their close distance to the Sun. In these conditions, rocky materials undergo condensation, while iced gaseous materials undergo vaporization. In the outer parts of the Solar System temperatures are too low to allow these transformations.
The correct answer is again "all of the above".

Identify the following as a suspension or a colloid. sand in water

Answers

I would say that sand in water is a suspension as you can see the particles with the naked eye or a microscope. Also, the solution will settle if left alone and the sand will sink to the bottom.
suspension would be the answer

How are important properties of Mercury, Venus, and Mars different from important properties of Earth?

Answers

Hi there,

There is one thing that is the most difference about other planets. Earth is a perfect condition for humans, animals, and other living things. Venus and Mars are not quite good for that. Venus has a very HOT surface, which makes it nearly impossible to be on. Mars on the other hand is very COLD, colder than earth because it is farther from the sun.

To find amplitude, measure _____.
A: the horizontal distance between consecutive crest positions
B: the horizontal distance between a consecutive crest and trough
C: the vertical distance from a crest to a trough
D: the vertical distance from a crest to the rest position
Never mind, use this for free points. I already answered it.

Answers

Final answer:

The amplitude of a wave is defined as the vertical distance from a crest (or trough) to the rest (equilibrium) position of the wave. Thus, to determine the amplitude, one must measure this vertical distance.

Explanation:

The amplitude of a wave is the measure of the maximum displacement of the medium from its rest position. It can be seen as the 'height' of the wave, and it's measured vertically. If we consider a wave to be symmetrical, the crest (top of the wave) is distance +A above the equilibrium (resting) position, and the trough (bottom of the wave) is distance -A below it.

Thus, the amplitude refers to the vertical distance from a crest (or trough) to the rest position. In simpler terms, to find the amplitude, measure the vertical distance from a crest to the rest position. Hence, the correct answer is D: the vertical distance from a crest to the rest position.

Learn more about Amplitude here:

https://brainly.com/question/8662436

#SPJ6

Where in the motion is the magnitude of the net force on the object a maximum? where in the motion is the speed a maximum?

Answers

Assuming you are asking about some sort of oscillation, the magnitude of the net force is maximum where the acceleration of the object is the largest. The velocity of an object is maximum where the acceleration is zero.

What is the difference between faults and folds?

Answers

Hello,

The answer is "one involves displacement other involves deformation ".

Reason:

A fault is a an extended break in a body of rock (involving displacement) and a fold is a bent or curved as a result of permanent deformation.

If you need anymore help feel free to ask me!

Hope this helps!

~Nonportrit

Thunderstorms occur where warm, moist air has absorbed enough heat and moisture to be significantly __________ than the surrounding air.

Answers

Students should realize that if an object weighs more than an equal volume of water, it is more dense and will sink, and if it weighs less than an equal volume of water, it is less denseand will float. Remember that the density of water is about 1 g/cm3. Predict whether the following objects will sink or float.

The answer is less dense

to increase friction you could :

a.increase the mass of an object
b.put your objects on a wheel
c.make the surfaces smooth or slick

Answers

We would have to consider first, the word friction. This friction, would the signify on how a object would then be attracted by another, using it's own abilities that this friction, and also how strong this friction would then be. Therefore, this would actually only be handled, if the surface would then be as smooth as possible, and also, it would then have to have a slick surface, in order for a object to obtain a certain degree of friction.

Your answer: make the surfaces smooth or slick

Before going to answer  this question first we have to know something about friction.

Friction is the opposing force which is due to interlocking of irregularity and wielding effect.In our naked eye a surface may  look smooth, but at microscopic level, it has elevations and depressions.

A rough surface has more friction as compared to a smoother surface as smoother surface has less irregularity.

Again we know that that rolling friction is less than sliding friction.so whenever the object will be placed  on a wheel,so there will be less friction.

Again we know that the frictional force is directly proportional to the normal reaction.

The empirical formula for frictional force F= coefficient of friction × normal reaction[tex]i.e F=\mu*N[/tex]

so whenever the mass increases ,correspondingly there will be increment in normal reaction which results in the increment in kinetic friction.

But one thing we have to remember that friction is also dependent on contact area.As long as the contact area is same ,there will be no increment in friction due to increment in mass.

So the first answer is partially correct.


According to the law of conservation of energy, energy cannot be _____.

A. changed or destroyed

B. created and destroyed

C. created or destroyed

D. created and changed

Answers

Answer: B ; created and destroyed

Explanation:

According to the law of conservation of energy, energy can neither be created nor destroyed but can be converted from one form to another

Which simply means you can't create energy and at the same time you can't destroy it.

An energy can be converted from one form to another that is from potential energy to kinetic energy

There is no destruction of energy in such a process

Final answer:

The Law of Conservation of Energy states that energy cannot be created or destroyed. This means that the total amount of energy in a system remains constant. When energy appears to disappear, it has typically been converted to another form.

Explanation:

According to the Law of Conservation of Energy, energy cannot be created or destroyed. This is a fundamental law in physics that states that the total amount of energy in an isolated system remains constant over time. For example, when a ball drops from a height, its potential energy is transformed into kinetic energy as it falls, but the total energy within the system (the ball and the Earth) doesn't change. Therefore, the correct answer is C: created or destroyed.

Learn more about Law of Conservation of Energy here:

https://brainly.com/question/12050604

#SPJ5

Which mineral is hard and has the same color and streak

Answers

Final answer:

A hard mineral with the same color as its streak is likely a metallic mineral, with examples including hematite and galena. The streak test is performed using an unglazed porcelain plate to reveal the color of the mineral's powder form.

Explanation:

The mineral in question, which is hard and has the same color as its streak, could refer to one of the metallic minerals, as they often have a streak color that is indicative of their actual color. Examples include hematite, with a dark gray on hand-sample but a red-brown streak, or galena, which has a dark gray streak matching its dark gray appearance. To determine the streak color, one can perform a streak test by rubbing the mineral across an unglazed porcelain plate. This test is useful because the powder form of the mineral may show colors that are different from the bulk mineral due to the particle size affecting how light is absorbed and reflected.

if an elephant has a mass of 2,000 kg, what is its weight on Earth? (1 point) A. 0.0049 N B. 204 N C. 19,600 N D. 43,100 N

Answers

the gravity of earth is 9.8.so to find the weight:
[tex]2000 \times 9.8 = 19600[/tex]
C is true
19,600N

Answer:

Option C is correct, 19,600N

Explanation:

An elephant has a mass of 2000kg, m=2000kgGravitational acceleration, g=9.8weight ?thus applying formula; W=mgputting values, W=2000×9.8=19600NWhat is gravitational acceleration?

Gravitational acceleration (symbolized g) is a physics term that denotes the strength of a gravitational field. It's measured in meters per second squared ([tex]m/s^{2}[/tex]). 1 g is approximately 9.8 [tex]m/s^{2}[/tex] at the earth's surface.

hence, Option C is correct, 19,600N

https://brainly.com/question/13769294

#SPJ2

When the moon is directly opposite the sun in the sky, its phase is?

Answers

It is called Full Phase

How many atoms of each element are in the chemical formula P2O5?

2 phosphorus and 5 oxygen
5 phosphorus and 2 oxygen
1 phosphorus and 5 oxygen
2 phosphorus and 1 oxygen
the answer is the last one

Answers

2 phosphorus and 5 oxygen

Answer:

2 phosphorus and 5 oxygen

Explanation:

The chemical formula of the substance is:

[tex]P_2 O_5[/tex]

where each subscripts indicates the number of atoms of each element. We see that P (phosphorus) has a subscript '2' while O (oxigen) has a subscript '5', so the correct answer is

2 phosphorus and 5 oxygen

Jesse travels 3.0 meters east and then turns and travels 4.0 meters north. Which of the diagrams below illustrates his displacement?


Answers are in the diagram below.

Choose one.

And I will mark the right answer The Brainliest.

Answers

The second diagram. The arrow of the 3meters journey rests underneath the tail of the 4meters journey, and are both joined by the resultant 5meters vector joining the tail to the arrow

Answer: the Fourth diagram

Explanation: The fourth diagram shows movement from her origin with the arrows indicating her movement 3metres east, from where she turns north and walks 4 metres the arrows indicates that. The resultants 5meters indicates her return back to her starting point with the arrow pointing at the tail of the 3metres.

Discuss how metallic bonding accounts for the common properties of metals

Answers

Metals are goods conductors of electricity because the electrons in the electrons sea are free to flow and carry electric currents. Metals are ductile and malleable because local bonds can be easily broken and reformed.

Particles in metals are strongly held by the intermolecular force called metallic bonds. This strong bonding make the metals hard, feasible to conduct thermally and electrically.

What are metals?

Metals are electropositive elements in periodic table. The alkali metals, alkaline earth metals and transition metals compose the metallic elements. They all shows the metallic properties such as conductivity, malleability, ductility, luster etc.

Metal are consists of a sea of mobile electrons amidst the pool of positive ions. The metallic particles form a well ordered crystal lattice structure with metal ions connected by strong metallic bonds.  The electrons can delocalize into the interstices and make the metal lattice conductive.

The close packed structure of metallic particles with free electrons make metals highly conductive both thermally and electrically. Moreover they exhibit color by the transition of electrons with absorption energy.

To find more on metals, refer here:

https://brainly.com/question/28650063

#SPJ2

Which of the following is not a name of a scale for measuring temperature? A. Kelvin B. Celsius C. Absolute D. Fahrenheit

Answers

Hello,

The answer is option C "absolute".

Reason:

The answer is option C because the three names for temperatures are: Kelvin, Celsius, and Fahrenheit therefore your answer is option C.

If you need anymore help feel free to ask me!

Hope this helps!

~Nonportrit

Answer:

Kelvin, Celsius, and Fahrenheit

Explanation:

A rock is thrown upward with an initial velocity of 16 ft/s from an initial height of 5 ft. write a quadratic function equation that describes the height h at time t.

Answers

Final answer:

The quadratic function equation that describes the height of the rock is h = -16t^2 + 16t + 5.

Explanation:

To write a quadratic function equation that describes the height h at time t, we can use the kinematic equation for vertical motion: h = -16t^2 + 16t + 5. This equation represents the height of the rock as a function of time, taking into account the initial height, initial velocity, and acceleration due to gravity. The coefficient -16 in front of t^2 accounts for the downward acceleration of the rock.

Read the scenario below and answer the question that follows.

Molly and Mark are new parents. Their daughter Alvina often cries when she is uncomfortable. Each time Alvina cries, her parents give her a stuffed rabbit. Eventually, Alvina looks at the rabbit and cries because she associates the rabbit with being uncomfortable.

What is the conditioned stimulus (CS) in this scenario? A. the rabbit B. Alvina being uncomfortable C. Alvina’s parents D. Alvina getting hungry

Answers

i think it is a because she cries when she sees them

Answer:

A.

Explanation:

just took it on e2020

Other Questions
Read this excerpt from Abraham Lincoln's Gettysburg Address and then answer the question that follows: (1) Four score and seven years ago, our fathers brought forth upon this continent a new nation: conceived in liberty, and dedicated to the proposition that all men are created equal. Now we are engaged in a great civil war ... testing whether that nation, or any nation so conceived and so dedicated ... can long endure. We are met on a great battlefield of that war. (2) We have come to dedicate a portion of that field as a final resting place for those who here gave their lives that this nation might live. It is altogether fitting and proper that we should do this. But, in a larger sense, we cannot dedicate ... we cannot consecrate ... we cannot hallow this ground. The brave men, living and dead, who struggled here have consecrated it, far above our poor power to add or detract. The world will little note, nor long remember, what we say here, but it can never forget what they did here. The purpose of this speech is most similar to which of these? (5 points) Select one: a. A critical book review b. A company's mission statement c. A solemn discussion of events d. A lecture on fascinating history Which people did Joseph Stalin punish What is 43.29 rounded to the nearest 10th Can someone please check my answers? 1. What is the word for the last meal of the day in Spanish? A. La cena B. El almuerzo C. la sal D. el dsayuno I pick A*** some modern areas of study have names based on Greek. mark each of the following areas of study if its name has a Greek origina.biolygyb.physicsc.geographyd.algabrae.philosophy Why is a 100% fat-free diet unhealthy?a. fat-free foods have unnatural additives to make them taste better.b. dietary fat is necessary for carbohydrate absorption.c. essential fatty acids must be obtained from the diet.d. the body cannot obtain enough energy from food if no fat is present? In a midsummer night's dream, when will theseus and hippolyta be married act 1 scene 1 Identify the items that are part of an ecosystem. Check all that apply. trees pond animals rocks mountain What is the medium of 14.1,20.7,24.3,16.0,20.8 china is the leading producer of the grain that is chief ingredient in pastas and many kinds of bread. name this grain. Much of the energy used by people in both rural and urban areas is used for the same thing. However, ____________________ is practiced almost exclusively in rural areas, and can be energy intensive. Construction Manufacturing Agriculture 2. There are some overthecounter drugs that can cure STDs. (1 point)truefalse3. Which is the best protection against an STD infection? (1 point)condomsabstinencewashing the body thoroughlygoing to the doctor for a monthly checkup4. Which STD can be spread by skintoskin contact? (1 point)genital wartsAIDShepatitis Bgonorrhea5. Which STD can affect a person for life because there is no cure? (1 point)syphillisherpesgonorrheachlamydia6. The human papilloma virus can cause _____. (1 point)syphillis . When did the Romans take over most of Italy? (1 point) by 500 BC by 267 BC by 125 BC by 100 AD During the industrial revolution, how did life change? what was the cotton gin? who were the luddites What two numbers add to 2 and multiply to -14 It costs $3.15 for a pack of 15 pencils.Find the unit price in dollars per pencil.If necessary, round your answer to the nearest cent. The monetary unit of Spain is the... a. dollar c. euro b. peso d. peseta Charlie reads quickly. He reads 1 and 3 seventh pages every 2 third minutes. Charlie reads at a constant rate. How many pages does charlie read per minute? A historian is making a historical argument about the French Revolution. He notes that, following the Revolution, a rash of violence swept over France. He refers to the execution of French royalty and the European wars that revolutionaries launched following their victory to support his argument. In his opinion, it is morally wrong for any political movement to use violence to achieve its goals. Based on this information, he argues that the French Revolution produced far more negative outcomes than positive ones. Which part of the historian's argument does not rely on any historical evidence? decide if the following sentence is grammatically correct or incorrect no vino nadie a la fiesta